Used Wood Brikettieren Press for sale (18,480)

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm Gusdsiidm Nspfx Af Tsh The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake nozzle: 300 mm Engine rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volumetric flow rate: 6000 m³/h Nominal volumetric flow rate: 5,089 m³/h Negative pressure: 2,587 Pa Filter area: 30 m² Dimensions (L x W x H) in mm: 3,000 x 1,361 x 2,817 Briquetting capacity: 30 - 50 kg/h Briquet diameter: 50 mm Weight: 1570 kg Machine is brand new and in stock at our warehouse. - AVAILABLE IMMEDIATELY - Subject to prior sale Godpjh D If Hjfx Af Touh Location: 54634 Bitburg

Condition: new, Year of construction: 2026, functionality: fully functional, Gannomat Concept 70 Eco Body Press Year of manufacture: 2026 including the following options: - Rapid traverse speed, adjustable up to 50 mm/sec - Machine feet (working height 500mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel joints in body pressing, as well as for drawer production. Brief description: • Proven tolerance compensation system (GANNOMAT system) • 2 potentiometers for steplessly adjustable pressing force • Minimum pressing force 300/500 daN (kg) for Concept Eco, or Minimum pressing force 600/800 daN (kg) for Concept Primus • Maximum pressing force 2200 daN (kg) for Concept Eco, or Maximum pressing force 3500 daN (kg) for Concept Primus • 3 pressing and traversing speeds 5 / 10 / 25 mm/sec (with fine positioning / creep speed) • Freely adjustable pressing time preselection with automatic opening function • Concept Eco: Simplest operation via 6 separate push buttons for 8 movement sequences • Concept Primus: Simplest operation via LCD display Universal application range: • Bodies, e.g. for furniture and cabinets • Mitered bodies • Bodies with an overhanging lid • Drawers • Pressing of multiple bodies / drawers Advantages: • Proven tolerance compensation system (GANNOMAT system) • Electromechanical body press with frequency-controlled geared motors • Independent vertical and horizontal pressing bars • High service life due to proven and high-quality components • Construction in a solid and robust design • Space-saving design • Body pressing = Simple + Fast + Efficient + Flexible + Precise + Professional Guedpfx Afsvxgrro Toh • Simple operation via a simple and practical control panel • Fast pressing due to pressing bar positioning speed of up to 50 mm/sec (option) • Efficient due to precise pressing of various body sizes • Flexible due to adjustable parameters such as pressing force, pressing time, traversing speeds • Precise due to angle-accurate pressing of furniture bodies and drawers • Professional production of bodies and drawers with a modern body press

Condition: excellent (used), Self-loading press for gluing Orma LS/ECO/CA 30/13 Working length 3000mm Working width 1300mm Automatic material loading Glue application system Shelves heated with oil to 130C Top pressure force 57t Gsdpfx Ajv Nhx Uef Touh Side pressure force 9t Year of production 2001 CE certificate

Condition: used, Year of construction: 2010, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 2010, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Gusdjv Sthgspfx Af Teh Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Year of construction: 2026, Horizontal bending machine T 1000 Multi - ZOPF - with semi-automatic control - hydraulic pressure 100 to. - length of stroke 300 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 10 KW - 400 V 50 hz 3 ph. - working height 900 mm Godpfxjg Anuro Af Tjuh - closed table - replaceable wear plate - weight 2300 kg - colour RAL5012 / RAL7015 - bending capacity: flat material max. 300x32 mm (V200) round tube 3/8" - 3"

Condition: good (used), Schuler PE4s 50/800 high-speed press Manufacturer: Schuler Type: PE4s 50/800 61/21 600/3 Gedegryc Nepfx Af Tsuh Press force: 50 tons Stroke: 800 mm Strokes per minute: 125-300 Ram stroke: 40 mm Kohler unwinding reel 500.1 M More items – new and used – can be found in our shop! International shipping costs available upon request!

Year of construction: 2026, condition: new, With the separation of milled lumber, laid loose or as a package, already milled lumber can be processed economically. In a two-stage process, the lumber is separated for further processing. It is also possible to insert the separated lumber in a controlled manner in a running process. The feeder is mechanically designed in such a way that even crooked logs can be fed in safely. In addition, it can be adjusted to the diameter of the wood so that only one piece is transported further, thus avoiding stoppages in the further process. Guodpfx Afsg Rxhgs Teh

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Gsdpfx Afjhtaaqo Tsuh Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: like new (used), Year of construction: 2004, HYDRAULIC PRESS FOR GLUING WOODEN ELEMENTS TO THE THICKNESS OF HSKG Category: VI - Hydraulic presses for gluing wooden parts. The HSKG device is used for gluing wooden cut-thickness parts under high pressure of hydraulic cylinders. The range of achievable crushing forces per cylinder is 5-11kN (horizontal) and 25-55kN (vertical). The gluing of elements is carried out in a stack with the dimensions of the loading field. Stack forming is carried out by hydraulic compression between the sliding vertical beams and the vertical slats of the transverse cylinders. Both stack forming elements are equipped with wooden or metal inserts corresponding to the profile of the slat stack. Gluing wooden elements from the thickness improves the quality of the frames, reduces the cost of machining, reduces the amount of wood waste. Technical and operational data ( of standard execution HSKG - 6m ) Number of loading fields pcs 4 Gusdpfx Ajtrl R Asf Tjh Dimensions of a single loading field - loading height - length of slats in one field mm mm 1140 1530 Maximum width of slats mm 150 Maximum length of glued elements mm 3120 Installed power kW 3 Electricity supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Number of actuators on one field: mm mm O 50x100 - 3 pcs. O 80x100 - 3 pcs. External dimensions (L x W x H) mm 8120x1000x2300 Weight of the device kg 4800 At the request of the customer, we also make other configurations of pressure actuators control depending on the expected length of glued elements, as well as other lengths of individual working fields in different quantities in the whole press set, and working width of up to 220 mm maximum with increased pressure force.

Year of construction: 1994, condition: good (used), machine/vehicle number: 24.105, A used, well-maintained hydraulic press brake HATASTAR, equipped with: - CYBELEC DNC 70 control system - Controlled axes Y1, Y2, X, R - Hydraulic upper tool clamping - Hydraulic crowning - FIESSLER AKAS safety system - Tools - Press brake manual - Documentation Gujdpfjfthzkex Af Tjh Bending length 4600 mm Frame width 4100 mm Pressing force 1350 kN Stroke 220 mm Rapid traverse 140 mm/sec Working speed 10 mm/sec Return speed 100 mm/sec Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Condition: new, New Transfer press line from min. 300t up to max. 3500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Guodpjf Rt Ubofx Af Tsh

Condition: new, Year of construction: 2026, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how Godpfoxfwdox Af Tsuh + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2025, HIDRAULIC BOOK PRESS PK-55x38 H -is a double press of very new conceiving for books and agendas -it is quick and simple to use -maximum size of material; 550x380 mm -the new model has a timer Guodpfx Asbyhnkof Toh

Condition: new, functionality: fully functional, Year of construction: 2026, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, reverse speed: 14 mm/s, total length: 1,150 mm, total width: 850 mm, total height: 1,800 mm, Special Offer – 5% Discount Available! Gusdpfx Afsyr Ek Re Toh Hydraulic C-Frame Press – 250 kN (25.5 Tons) The Hydraulic C-Frame Press is a professional industrial machine designed for precise pressing, straightening, bending, assembling and forming operations. Its open C-frame construction provides excellent access to the working area, allowing convenient machining of larger workpieces and easy material handling from multiple sides. The rigid welded steel frame ensures maximum stability, durability and long service life. The precision hydraulic system provides smooth control of both pressing force and ram speed, delivering reliable performance and high machining accuracy. This versatile press is suitable for industrial production, maintenance departments, tool rooms, metalworking workshops and automotive applications. Main Features • Pressing force of 250 kN (approx. 25.5 tons) • Open C-frame design • Heavy-duty welded steel construction • Precise hydraulic control • Smooth ram movement • Excellent access to the working area • Suitable for industrial and workshop applications • CE certified Technical Specifications • Pressing force: 250 kN (approx. 25.5 tons) • Maximum hydraulic pressure: 25 MPa • Maximum opening: 500 mm • Ram stroke: 200 mm • Table dimensions: 500 × 400 mm • Throat depth: 200 mm • Downward speed: 10 mm/s • Return speed: 14 mm/s • Motor power: 3 kW • Packed dimensions (L × W × H): 1150 × 850 × 1800 mm Applications • Pressing • Bending • Straightening • Assembly operations • Metal forming • Metalworking workshops • Automotive industry • Tool rooms • Industrial manufacturing Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, warranty service and professional after-sales support. We provide professional transport throughout Europe using specialized machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, total length: 3,870 mm, total width: 1,550 mm, total height: 2,400 mm, overall weight: 7,400 kg, feed length X-axis: 600 mm, feed length Y-axis: 120 mm, spindle motor power: 11,000 W, product height (max.): 390 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, HYDRAULIC CNC PRESS BRAKE MTP 125×3200 – 125 T – MTP-3212 – 4 AXES Y1, Y2, X + V The brand-new MTP 125×3200 Hydraulic CNC Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets up to 6 mm thick. Thanks to its advanced CNC control system, heavy-duty welded frame, and premium-quality components, the machine is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (Y1, Y2, X + V), ensuring exceptional accuracy, repeatability, and fast production setup. STANDARD EQUIPMENT • MTP-3212 CNC controller with a large full-color touchscreen • Independently servo-driven Y1 and Y2 axes • Servo-driven X-axis (back gauge) • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • Mobile control panel mounted on a swing arm • LED working area illumination The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. PREMIUM COMPONENTS The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system • Schneider Electric electrical components • Omron and Schneider Electric safety components • Heavy-duty steel hydraulic tubing for maximum durability and leak prevention ERGONOMICS & SAFETY Designed for maximum operator comfort and safety, the machine is equipped with: • Safety light curtains • Side safety guards • Rear safety fence • Easily accessible emergency stop switches • CE Declaration of Conformity • Operating manual TECHNICAL SPECIFICATIONS • Maximum sheet thickness: up to 6 mm • Pressing force: 125 T • Maximum bending length: 3200 mm • Distance between columns: 2700 mm • Throat depth: 320 mm Gujdpfx Aozg H Ewsf Teh • Ram stroke: 120 mm • Maximum opening height: 390 mm • Back gauge travel (X-axis): 600 mm • Controlled axes: Y1, Y2, X + V • Main motor power: 11 kW • Power supply: 400 V / 50 Hz • Machine dimensions (L × W × H): 3870 × 1550 × 2400 mm • Machine weight: 7,400 kg TECHNICAL SUPPORT We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.

Condition: as good as new (ex-display), functionality: fully functional, power: 22 kW (29.91 HP), color: yellow, input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 98 rpm, rotor diameter: 300 mm, The LR1000 is particularly distinguished by its high reliability and excellent performance. The most well-known models of the LR series are particularly popular for demanding applications where high throughput is required. Further technical data: Cutting head opening: 1000x1050 mm Hopper volume: approx. 1000 liters Drive power, conveyor screw: 0.55 kW Gsdpfx Aozmh Efef Tjuh Elastic belt drive Drive power, hydraulics: 1.1 kW Dimensions: 1761 x 1630 x 1704 mm Gearbox Design: 2-stage spur gear gearbox in an oil bath for low maintenance Cutting head Number of cutting tools: 27 Optional equipment Machine housing in a 45° design Extension of the conveyor screw channel by 400 mm with downward discharge for LR1000 with 25 mm perforated screen 4x adjustable machine feet for LR1000 with vibration dampers Light barrier in the lower machine housing 1x control element, external, with start/stop and emergency stop buttons 2x emergency stop contacts including relay Industrial horn 230 V AC

Condition: ready for operation (used), Year of construction: 1983, BOBST SPO 1600 Max Speed 5000 per hour Year 1983 Max lenght 1075mm Max width 1580mm Fully reconditioned by Bobst 2015 Gjdpfx Afoxcayyo Teuh Central line

Condition: excellent (used), Briquetting machine POR Oscar 9kW Gusdpfx Afexdahyj Tsh Average briquette output: 130-180 kg Briquette diameter: 70 mm Motor power: 9 kW Feeding hopper diameter: 1170 mm Technical documentation CE mark Machine weight approx. 800 kg

Year of construction: 2019, condition: new, We offer bending tools and punching tools for TRUMPF, AMADA, BYSTRONIC, LVD, SALVAGNINI, DURMA, ERMAKSAN, MVD, and HACO machines. Gedod H T Tfspfx Af Touh Standard and custom tools. Please send us your requirements, and we will provide you with the appropriate tool.

Condition: good (used), Year of construction: 2008, pressing force: 160 t, stroke length: 290 mm, overall weight: 11,000 kg, working width: 4,100 mm, distance between side stands: 3,550 mm, Brand: Dener Model: DMP 160/40 Year: 2008 Bending length: 4,100 mm Force: 160 tons 2 axes (Y, X) *Torsion bar machine, Y axis Gujdpfjwi Sktex Af Tsh X stop: 650 mm Cylinder stroke: 290 mm Distance between uprights: 3,550 mm NC control: Dener HT062 Neck: 450 mm Motor power: 15 HP Weight: 11,000 kg

Condition: good (used), Code: 0119 Brand: KOLMAG - ITALY Model: PGP 600 F Hydraulic press for moulds, frames, furniture elements, solid wood doors, plastic materials, composite materials and various Press modular structure with heavy thick plates without weldings and worked by tool machine Oleodinamic plant with pistons prefilling system in order to have a quick opening and closing of the platens Dimensions of massive steel platens mm 1600 x 500 - Thickness mm 60 with electric resistances - Max temperature 260°. N° 3 pistons diameter mm 240 Pressure kg/cm2 56 Thrust Tonn 450 Safety photocells Hydraulic power unit Kw 7,5 Power absorbed heating platens 31 Kw Control board with pressure control gauge - Timer for platens opening - Telethermometer to regulate upper platen temperature - Telethermometer to regulate lower platen temperature - Switches for opening and closing of the platens - Emergency push button Gujdpfx Ajwk Ntzof Teh Overall dimensions mm 2250 x 1700 x 3300 h Weight kg 9000

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir Guedpsw Sgnkofx Af Tjh - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: excellent (used), Catalog number: 7984 TECHNICAL DATA - Clamping force: hydraulic - Briquette shape: round - Briquette diameter: 70mm - Hopper diameter: 1000mm - Output: up to 10 briquettes/min, up to approx. 90 kg/hour - Automatic machine operation - Motor: 5.5kW Gjdpfxozwwxco Af Tjuh - Dimensions (L/W/H): 1800x1200x1500mm - Weight: approx. 650kg ADVANTAGES - Made in Italy - Used briquetting machine - Unpainted - Very good condition Net price: 33900 PLN Net price: 7884 EUR, depending on an exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: used, Catalog number: 7536 – Made in Germany – Engine not included – Used wood chipper Gedpfx Afozwwy Hs Touh TECHNICAL DATA Inlet width: 530 mm Number of blades: 2 pcs Shaft diameter: 580 mm Inlet width: 420 mm Inlet height: 200 mm Net price: 30,000 PLN Net price: 6,977 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to fluctuations in the exchange rate)