Used Wire for sale (2,850)

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 3,483 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.016 Category: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Picking height: 10500 mm Initial lift: Yes Cabin width: 1200 mm Nwodpex Ny Hpefx Ah Hob Year: 2015 Operating hours: 3483 hours Battery capacity: 48 V / 620 Ah - Year 2021 Options: FULLY equipped!! - Triplex mast - FFL - SAFETY doors with TILT FUNCTION!! - Adjustable forks! - PSA ( Sick ) - Induction / wire guidance - End position sensors on mast Complete LIKE NEW!!!

Condition: excellent (used), Year of construction: 2007, operating hours: 16,906 h, functionality: fully functional, Sodick AQ 300 L in good condition Operating hours: 16,906 Year of manufacture: 2007-11 Linear servo control X, Y, Z: 300 x 200 x 200 mm U, V: 80 mm Wire diameter: 0.15–0.3 mm (0.25 mm installed) Max. workpiece dimensions: 740 x 440 x 200 mm (X, Y, Z) Max. workpiece weight: 300 kg Chiller Deionization cartridge Complete documentation Machine is powered for inspection Nwjdpsxpu I Eefx Ah Hob

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Nsdjw Ucyujpfx Ah Hewb Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Year of construction: 2007, condition: excellent (used), Makino SP 43 CNC control MGW-R Travels X: 450 mm Y: 300 mm Z: 320 mm U/V axis: +/- 101 mm table: 730x580 mm tub: 890x850 mm max.workpiece weight: 900 kg Nodpjiv H Dqefx Ah Hswb dimensions approx: LxWxH 3000x3000x2300 mm weight approx: 3400 kg

Year of construction: 2015, condition: ready for operation (used), General Data Machine weight 3000 kg Control Unit Nwodpfsx D Duqox Ah Hjb Brand FANUC Model RoboCut α-C600iA Main Drive Number of axis 5 Min. Wire Diameter 0.1 mm Max. Wire Diameter 0.3 mm Movement X-Axis Movement 600 mm Z-Axis Movement 310 mm Y-Axis Movement 400 mm This 5-axis FANUC RoboCut alpha C600iA was manufactured in 2015, featuring X/Y axis travel of 600 mm × 400 mm and a Z-axis option up to 410 mm. It supports a maximum workpiece weight of 1000 kg and utilizes a FANUC Series 31i-W MODEL B CNC for precise control. Equipped with AI technology for enhanced accuracy and automatic wire threading, it's ideal for detailed machining tasks. Consider the opportunity to buy this FANUC RoboCut alpha C600iA wire edm machine. Contact us for more information. Application Types EDM

Year of construction: 2015, condition: ready for operation (used), General Data Measurements width 3030 mm Measurements depth 2687 mm Measurements height 2150 mm Machine weight 3500 kg Nodpfx Aox D Rqfsh Hewb Main Drive Number of axis 5 Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 310 mm V-Axis Movement 150 mm U-Axis Movement 150 mm Workpiece Workpiece weight 1500 kg Additional Equipment Cooling/Temperature Control: Cooling system with temperature regulation Generator: Transistor pulse generator Output Current: 50 A Generator Size: 600 x 650 x 1765 mm Generator Size: 600 x 650 x 1765 mm This 5-axis Mitsubishi MV2400S wire EDM machine was manufactured in 2015. It features X, Y, Z movements of 600 x 400 x 310 mm and U, V axes at 150 x 150 mm, supporting a maximum workpiece weight of 1,500 kg. Equipped with an advanced Mitsubishi M700 controller with 3D CAD/CAM capabilities, it ensures precise machining. Consider the opportunity to buy this Mitsubishi MV2400S wire EDM machine. Contact us for more information about this machine. Application Types EDM

Year of construction: 2013, condition: ready for operation (used), General Data Nwodpfxox D Iv So Ah Heb Machine weight 3500 kg Control Unit Brand MITSUBISHI Main Drive Number of axis 3 Movement X-Axis Movement 600 mm Y-Axis Movement 400 nmm Z-Axis Movement 310 mm Workpiece Workpiece X 820 mm Workpiece Y 305 mm Workpiece Z 1050 mm Workpiece weight 1500 kg Additional Equipment Wire diameter: 0.1 – 0.3 mm This 3-axis Mitsubishi Electric MV2400R wire EDM machine was manufactured in 2013. It features a PC-based control unit with a 15" LCD touchscreen, supporting 2D/3D CAM and graphics verification. Capable of handling workpieces up to 1050 x 820 x 305 mm and 1500 kg, it offers a machining travel of 600 x 400 x 310 mm. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi Electric MV2400R machine we have for sale. Contact us for more information. Application Types EDM

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 2720 mm Measurements depth 2520 mm Measurements height 2290 mm Machine weight 4400 kg Main Drive Number of axis 5 Movement X-Axis Movement 650 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm V-Axis Movement 160 mm U-Axis Movement 160 mm Workpiece Workpiece weight 800 kg Njdox D Rczspfx Ah Hewb This 5-axis EXCETEK V 650 G was manufactured in 2013. It's a wire EDM machine capable of handling workpieces up to 1000 × 700 × 345 mm and 800 kg. Features include X, Y, Z travels of 650 mm, 400 mm, and 400 mm respectively, plus U/V-axis travel of 160 × 160 mm. It boasts a solid cast-iron construction and a stainless steel worktable for enhanced durability and precision. Contact us for more information about this machine. Application Types EDM

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 4500 kg Main Drive Number of axis 3 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Njdpfx Asx D Sb Ejh Howb Z-Axis Movement 256 mm Workpiece Workpiece weight 200 kg Additional Equipment Wire System: Wire diameter 0.1-0.33 mm, Wire speed 60-300 mm/s, Wire tension 0-25 N, Wire spool up to 25 kg, Threading system up to 250 mm height, nozzles 1 mm and 2 mm This 3-axis AGIE Challenge 2 eCut wire EDM machine was manufactured in 2006. It offers precision electrical discharge machining capabilities, ideal for detailed and intricate metal work. Consider the opportunity to buy this AGIE Challenge 2 eCut wire EDM machine. Contact us for more information about this machine. Application Types EDM

Year of construction: 1991, condition: ready for operation (used), Main Drive Number of axis 3 Movement X-Axis Movement 500 mm Z-Axis Movement 270 mm Y-Axis Movement 350 mm This 3-axis Sodick A500L wire edm machine was manufactured in 1991. It features a 500 mm X-axis, 350 mm Y-axis, and 270 mm Z-axis, providing precise and efficient operations. If you are looking to get high-quality wire EDM capabilities, consider the Sodick A500L machine we have for sale. Contact us for more information. Application Types Njdpox D Iakjfx Ah Hewb EDM

Year of construction: 2007, condition: ready for operation (used), This Sodick AQ537L was manufactured in 2007. It operates optimally between 20°C and 25°C ambient temperatures, with a full load current of 43 A and a rated capacity of 15 kVA. It requires a supply voltage of 200 V and is designed for three-phase power. Contact us for more information about this machine. Application Types EDM Nsdpfjx D Iplex Ah Hswb

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 3800 kg Measurements height 2220 mm Measurements depth 3200 mm Movement X-Axis Movement 370 mm Z-Axis Movement 250 mm Y-Axis Movement 270 mm Main Drive Number of axis 5 Dimensions Machine Length 3200 mm This 5-axis Sodick AQ 327 L wire EDM machine was manufactured in 1995. It features a table/work tank of 570 × 420 mm, supports a maximum workpiece weight of 500 kg, and offers a taper angle of ±25° for 80 mm cutting height. If you are looking to get high-quality precision cutting capabilities, consider the Sodick AQ 327 L machine we have for sale. Contact us for more information about this machine. Application Types EDM Nwsdpfjx D Dv Ijx Ah Hjb

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 530 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, wire diameter (max.): 0.35 mm, number of axes: 5, wire diameter (min.): 0.1 mm, Main Drive Number of axis 5 Min. Wire Diameter 0.1 mm Max. Wire Diameter 0.35 mm Movement X-Axis Movement 530 mm Z-Axis Movement 400 mm Y-Axis Movement 350 mm This 5-axis ONA KE350 wire EDM machine was manufactured in 2002. It features X/Y/Z travels of 530 × 350 × 400 mm and U/V travels of 140 × 140 mm, supporting a maximum workpiece size of 1050 × 800 × 400 mm and weight up to 3000 kg. It includes high-precision closed diamond guides and capabilities for automatic wire threading and water temperature control. Consider the opportunity to buy this ONA KE350 wire EDM machine. Contact us for more information. Application Types EDM Njdpfx Aox D D Taoh Hjwb

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 1860 mm Measurements depth 1400 mm Measurements height 1800 mm Machine weight 1900 kg Main Drive Number of axis 5 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 220 mm V-Axis Movement 32 mm U-Axis Movement 32 mm Workpiece Workpiece weight 500 kg Additional Equipment Water purifier tank Central lubrication Paper filtration Working light This 5-axis Mitsubishi FX10K wire EDM machine was manufactured in 2001. It features a 32-bit CNC control, automatic wire threading, and a generator for brass wire cutting. Capable of handling workpieces up to 630 × 530 mm and 500 kg, it includes a water purifier tank and central lubrication. Reach out for more information about this machine. Application Types Nwsdox D Iifjpfx Ah Hsb EDM

Condition: good (used), Hohner Favorit wire stitcher Very good condition, ready to work. A reliable machine, with legendary durability. Technical data: performance: 160-225 cycles / min sewing thickness: 25mm (piercing up to 40mm without closing the clamp from the bottom) wire diameter: max. 1mm Nedpfxswungbs Ah Hewb Power supply: 380V Weight: 280kg The machine has an adjustable table for block and booklet sewing.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,537 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 1,030 mm, Wire EDM machine from 2021 with only 11,537 operating hours! TECHNICAL DETAILS Travel Distances X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 350 mm Workpiece Data Workpiece weight: 1,000 kg Workpiece height: max. 350 mm Workpiece width: max. 800 mm Workpiece length: max. 1,030 mm Table Data Table width: 630 mm Table length: 950 mm Njdpsx I Akujfx Ah Hjwb MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,400 x 2,160 x 2,320 mm Overall weight: 5,440 kg EDM hours: 11,537 h Power-on hours: 29,381 h Type of mains supply: 3-phase current EQUIPMENT Manual central lubrication for CUT E series Heat exchanger kit Large wire spool accommodation 25 kg, CUT E series Wire chopper for CUT E series Signal lamp Note: Dismantling and loading can be carried out by the seller at an additional cost.

Condition: used, Year of construction: 2013, operating hours: 47,754 h, functionality: fully functional, machine/vehicle number: 52DR2077, workpiece weight (max.): 1,500 kg, travel distance X-axis: 620 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 300 mm, Equipment: documentation/manual, For sale is a used Mitsubishi MV2400R wire EDM machine in good, well-maintained condition. The machine is well preserved and has been handled with care. Nwodpfx Ahjx Iukmj Hob

Condition: used, Year of construction: 1975, functionality: fully functional, machine/vehicle number: D12L/8008, Offer Number: D12L/8008 Machinetype: wire nail press Nwedpfx Ahox Iggts Heb Make: WAFIOS Type: N4 Constr. year: 1975 diameter range: 1,8-3,4 mm nail length: 10-80 mm output - pieces/min: 550 Location: In our warehouse

Condition: ready for operation (used), functionality: fully functional, Automatic cable cutting / crimping / dismantling machine High daily productivity thanks to quick changeovers. On average, a crimping machine can produce between 700 and 1300 crimps per hour. This machine can crimp terminals ranging from 2800 to 3200 units. Additionally, the machine can test the connections it crimps! - Flexibility and diverse applications - Maximum uptime with minimum maintenance - Integrated quality measurement devices - Intuitive and user-friendly machine operation Njdpfjx H Um Ssx Ah Hswb

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, The fully automatic Alpha 530 single-core cable processing machine for crimping and fitting rubber seals on both sides meets the highest quality standards for cable cross-sections from 0.13 to 6 mm². Nsdpfxex H Uals Ah Howb

Year of construction: 1987, condition: ready for operation (used), A Mitsubishi wire EDM machine including an automatic wire changer (AWF system) is available. Travel X/Y: 381mm/749mm, table dimensions X/Y: 647mm/797mm, max. workpiece dimensions X/Y/Z: 647mm/749mm/259mm, max. workpiece weight: 950kg. Machine dimensions X/Y/Z: approx. 1850mm/2600mm/1950mm, weight: approx. 4100kg. Including 12 wire spools and one ceramic replacement plate. The wire changer is defective. Documentation available. An on-site inspection is possible. Njdpjx Hz Shjfx Ah Howb

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, wire diameter (max.): 10 mm, input frequency: 50 Hz, workpiece weight (max.): 70 kg, type of input current: three-phase, Equipment: cooling unit, OMEGA CM43 Submerged EDM wire The OMEGA CM43 submerged EDM is still connected and working perfectly. This machine achieves the highest precision and is an ideal choice for smaller workshops. Working area (mm) 500 x 350 x 300 Electrode size (mm) 100 x 100 x 100 Capacity (kg) 70 Electrode mass (kg) 10 Axis travel: X430, Y320 mm dieletric tank: T4 model power supply: 50A Omega Pulse If you need more information. We are here to help! Please contact us using the contact form or give us a call Nsdpfswr Utisx Ah Hewb Your ad has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 2022, table length 640 mm table width 540 mm 810 x 700 x 215 mm travel x / y / z 400 x 300 x 220 mm V-axis 120 mm U-axis 120 mm workpiece weight max. 500 kg Control M800 D-CUBES wire dia. 0,1 - 0,3 mm weight of the machine ca. ca. 3,1 t dimensions of the machine ca. 2,8 x 2,1 x 2,1 m Mechanical engineering concept: Hybrid design Machine included: - ODS - Optical Drive System - Tubular direct drives in XYUV axes - Linear scales in XYUV axes - Collision protection XYUVZ axes - Intelligent AT - Automatic wire threading for wire diameters 0.10 - 0.3 mm - Automatic fine hole search function - Easy 3D-Setup workpiece position detection - 5 controlled axes - prepared for additional axes - PFC - Precise Finish Circuit - H-FS - Finishing stage - LLS - Long Life System - 10 kg wire station - 4-sided framing table - hardened - Wire alignment block - Wire chopper - Compressor cooler Mitsubishi Electric M800 D-CUBES control system: - 19” full-touch monitor with gesture control - Hand pilot with configurable LCD display - Job planner incl. job interruption function - 3D CamMagic on board - Import of 3D Parasolid, 2D DXF / DWG - Graphic check: 3D, front and side view and top view - Operating and maintenance data output included Nwodpfxjvt Ec Ss Ah Hsb - Interfaces: Ethernet TCP-IP, 2 x USB port - Corehole technology Incl. the following special options: - ERGO-Lux light Ergonomic workspace lighting with LED floodlight Two LED lights, 3 x 6 watts each IP67 version for use in the work area Anodized aluminium housing with reflector insert - Training course 5-day basic seminar at a Mitsubishi training center Mitsubishi training center for 1 person if attended within 12 months of commissioning. Travel and accommodation costs are at your expense - all dimensions, weight and performance data without obligation - Used machine without warranty - interim sale reserved -

Condition: excellent (used), Year of construction: 2017, operating hours: 7,166 h, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, total height: 2,815 mm, total length: 3,475 mm, total width: 3,130 mm, This machine is very well maintained and in excellent condition. You can inspect and test this machine under power. Price is ex works, without dismantling. Manufacturer: Mitsubishi Electronic Year of manufacture: 2017 MODEL: MV4800 Operating hours: approx. 7,166 hrs Application type: Wire EDM Machine type: Wire-cut EDM machine Technical Data – Mitsubishi MV4800 General Information Width: 3,130 mm Depth: 3,475 mm Height: 2,815 mm Weight: 5,700 kg Movements X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 510 mm U/V travel: 200 (+/-100) mm Workpiece Nedpevdu Hzsfx Ah Hswb Diameter over bed: 1,250 mm Diameter over saddle: 1,020 mm Workpiece diameter: 505 mm Maximum table load: 3,000 kg Worktable External length: 1,080 mm External width: 780 mm Price significantly reduced. This machine is being sold due to business relocation.

Condition: excellent (used), Year of construction: 2017, operating hours: 8,500 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total length: 2,687 mm, total width: 3,030 mm, workpiece height (max.): 305 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 820 mm, type of input current: AC, table width: 840 mm, overall weight: 3,500 kg, table length: 640 mm, positioning accuracy: 0.003 mm, ### Price heavily reduced ### This machine is very well maintained and in very good condition. The machine is still in production. You can view and test this machine with power on. Price is ex works, without dismantling. Manufacturer: Mitsubishi Electronic Year of manufacture: 2017 MODEL: MV 2400R MV-R Series – Power for Precision Production hours: approx. 8,000 hours Application type: EDM / wire cutting Machine type: Wire EDM machine Technical specifications - Mitsubishi MV 2400R X-axis movement: 600 mm Y-axis movement: 400 mm Nwsdpfx Ahovq Rh Uo Heb Z-axis movement: 310 mm Travel (X / Y / Z) in mm: 600 / 400 / 310 Travel (U / V) in mm: 150 / 150 (+/- 75) Max. workpiece dimensions (W x D x H) in mm: 1050 x 820 x 305 Max. workpiece weight in kg: 1500 Table dimensions (W x D) in mm: 840 x 640 Overall dimensions (W x D x H) in mm: 2687 x 3030 x 2150 Machine weight in kg: 3500 Price greatly reduced.