Used Wire Cuting Forming for sale (5,948)

Condition: ready for operation (used), Year of construction: 2001, Immediately available from a small toolmaking workshop: Mitsubishi Wire EDM Machine Type FA 20 – S Advance Godpexnhvaofx Afiekc Year of manufacture: 2001 Table load / workpiece weight up to 1,500 kg Travel X/Y/Z: 500/350/300 mm Submerged (water bath) machine Automatic wire threading Complete accessories Price: EUR 4,000.— plus VAT ex location

Condition: used, Year of construction: 2001, Two lines available: Gksdpfxexb U Age Afiec Line 1 for hexagonal wire beads Line 2 for square wire beads One line consists of bead winder, bead extruder and cooling line, carousel and loader robot + coil winding.

Condition: good (used), Pentavac Penta2100 VFFS bagger Gsdpfx Afev Dl Tleiokc Serial: 1108 Vertical form fill and seal machine, 80mm diameter forming tube, 310mm jaw width, with date coder, ESA touch screen controls, mobile, 3Ph

Condition: used, Consisting of: “Ishida” Multihead weigher Type CCW-M-214W-S/50-SS Heads: 14 pieces Performance: up to 2 x 30 weighing’s/min Filling weight (max. weight): 10.000 g Accuracy: Average value 0 to +3.0 g Weighing range: 5 - 10.000 g Gjdpsxlptuofx Afiekc Max. volume: 12.500 cc (per individual weighing) Minimum division: 1g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1,6 kW In good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14115 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14116 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 34 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 4.0 kg Filling material dimensions: Approx. 240 x 105 x 370 mm Filling weight: 4.0 kg Grouping scheme: 1 x 3 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 5kW Packaging machine: Type: Elematic 3000 LS/335 in good condition

Condition: used, Year of construction: 2008, Travel distances: X axis = 350 mm Y axis = 250 mm Z axis = 220 mm incl. cooler Fully functional Gsdpfx Afew Swd Ajiokc

Year of construction: 2009, condition: good (used), Load capacity: 30 t Gedoqiz N Rjpfx Afiskc Fine lift Lifting height 9 meters

Year of construction: 2014, condition: like new (used), functionality: fully functional, • 4 bending rolls with long lifetime tungsten carbide inserts • Bending and breaking of scale in 2 levels (4 directions) • Outstanding bending angle (approx. 540° in total) • Very compact machine housing • Transport of scale by a scale waggon on wheels (screw conveyor optional) • Wire break control as an option • Wire diameter (low carbon) 5.5–6.5 mm • Wire diameter (high carbon) Gkjdpfjwu Dxmjx Afijc • Wire passing speed up to 3.0 m/s

Condition: used, 700-1400 creels per line, pneumatic beaks Gedpfx Afexcnr Reiskc

Condition: like new (used), Year of construction: 2022, functionality: fully functional, ITALMEC TBNS/9 Wet Drawing Line 2022 - 25 m/s, Copper Bath, Near-New, Slippage-Free Gkjdpfx Ajxm Tq Hofisc Description: ITALMEC TBNS/9 WET DRAWING LINE - High-performance wire drawing machine for copper and alloy. This premium unit is offered as part of a two-line package sale. Year of Manufacture: 2022. Commissioned: 2023. Condition: Near-New (Only 20 tons of test operation completed). Detailed Technical Specifications: ● Machine Type: Multiple Wire Drawing Machine (Wet). ● Technology: New Generation Slippage-Free (Independent motor on each capstan). ● Max. Operating Speed: Up to 25 meters/second (m/s). ● Max. Inlet Wire Diameter: 3.5 mm (specific to wet drawing). ● Drawing Process: Designed for high cross-sectional reduction. ● Control System: AC Siemens Electrical Cabinet and integrated drives. ● Unique Feature: Factory-integrated COOPER BATH (Miedziująca Wanna) included. Commercial & Logistics Information: ● Original Purchase Value (This Unit): 160 000 EUR. ● Ancillaries: Complete Line Wiring (approx. 50 000 PLN value) is included in the package price. ● Current Status: Professionally Disassembled and secured, ready for immediate loading (EXW). ● Price: This line is sold as part of a two-line package (TBNS/9 + TBNS/9 Standard). Total package price: 259 000 EUR EXW. Inquiries for a single machine purchase are welcome. This is a rare chance to acquire a 2022-technology wire drawing machine with minimal hours, guaranteeing cutting-edge performance.

Condition: used, SGP - Corrugated Sheet Roll Forming Line – Used Complete Line, composed of: Gsdpfx Afexm Tqteijkc • Roll forming machine EGB 401 MAT 11/98 with 18 forming stations • Motorized decoiler model AS/P 10x1250 • Loading cradle • Entry feeding table • Fixed cutting unit (Start/Stop system) • Discharge table • Automatic stacker • Main electrical control panels with integrated console Complete and fully functional line, ideal for the production of corrugated metal sheets. Technical Specifications – see data sheet in the photo

Condition: ready for operation (used), functionality: fully functional, Technical Data – SENY D75B: Rolling Pressure: 220 kN Workpiece Diameter: min. 3 mm – max. 70 mm Maximum Pitch: 6 mm Maximum Groove Pitch: 2.25 mm Maximum Roll Width: 160 mm Roll Diameter: min. 133 mm – max. 170 mm Gkedpfx Asxm Stgjfiec Roller Shaft Rotational Speeds: 24 – 30 – 38 – 45 – 62 – 72 – 90 – 114 rpm Roll Holder Shaft Diameter: 54 mm standard – 69.85 mm special Distance Between Shafts: min. 135 mm – max. 230 mm Working Stroke: max. 15 min Feed Rate: 0.5 mm/s – 6 mm/s Rolling Time: 0.1 s – 100 s Pause Time: 0.1 s – 100 s Main Motor Power: 5.5 kW Electrical Consumption: 8.6 kW Reservoir Capacity: 130 liters Weight: approx. 2,100 kg. Additional rolls available: M4.5 x 0.75 ISO. M6 ISO. M10 ISO.

Condition: used, Year of construction: 2009, operating hours: 3,641 h, functionality: fully functional, machine/vehicle number: 09N12011, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, total height: 2,015 mm, total length: 2,706 mm, total width: 2,706 mm, workpiece height (max.): 215 mm, workpiece width (max.): 700 mm, workpiece length (max.): 810 mm, table width: 550 mm, overall weight: 2,500 kg, table length: 650 mm, We are selling a Mitsubishi NA1200 Advance wire EDM machine. The machine was in operation in our single-shift production until recently and can be inspected under power. Gksdpfjxm Rl Iox Afisc

Condition: like new (used), functionality: fully functional, Witech brushing machine (for wire) 4 pcs Gkedpfx Afewu Da Rjiec Year of production: 2015 The brush descaling/cleaning unit is designed for all wire qualities (low-high carbon) wire rod with diameter 5.5–8mm and wire speed up to max 4m/s Used for a very short time (1 year). Very good condition Price: 18,000 euro/piece

Condition: like new (used), Year of construction: 2004, operating hours: 35,000 h, functionality: fully functional, Charmilles robofil 440cc Gkedexb Dzfspfx Afioc Year 2004 In very good condition, still in production

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Niebling HPF SAMK400 High Pressure Forming Machine (2022) with EEM module automatic film loading from magazine stack FAM module automatic removal of protective film SSR FIM2-607dr LC pro HPN ultra violet (UV) lacquer curing system with conveyor (2022) Gkedpfexlgwwsx Afijc Kuka Cybertech 2 series KR 22 R1610-2/SEC robot with controller & 2x tool stands Niebling NST 100 Intelligent Servo Punch (2022) Kist + Escherich Taifun-Clean workpiece cleaning station with Wanderes brush Rotary inspection table with camera, laser station & Keyence scanner stations, Epson placing & take off robots with controllers ESTA Dustomat 16M mobile dust extractor SAR process automation and product magazine storage with RFID traceability

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 2,240 mm, total length: 2,600 mm, total width: 2,810 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, empty load weight: 3,300 kg, warranty duration: 6 months, Charmilles Robofil 440 CCS Year of manufacture: 2010 Charmilles Millennium CNC control Travel distances (X / Y / Z): 550 x 350 x 400 mm Travel distances (U / V): 550 x 350 mm Maximum taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.15 mm to 0.33 mm Complete system dimensions: 2,600 x 2,810 x 2,240 mm Total system weight: 3,300 kg Upon order, the machine will be cleaned and completely overhauled by us, and all functions will be tested. Upon request, we offer the following services: - Commissioning of the machine at your site - 6-month warranty Gsdpsxlcqgofx Afiekc - Control system training - Accessories such as chiller and clamping devices

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Technical Specifications Travels (X / Y / Z): 350 × 250 × 256 mm U / V Axis Travels: ± 70 mm Max. Workpiece Dimensions (LxWxH): approx. 750 × 550 × 250 mm Max. Workpiece Weight: approx. 450 kg Gedpfx Afexmu Sfoiekc Table Size: 620 × 400 mm Wire Diameter: 0.15 – 0.33 mm (commonly 0.25 mm) Max. Taper Cutting Angle: ± 30° at 100 mm height Positioning Accuracy: ± 2 µm Psw N Hjxdubzjl Icsrb Wire Threading System: Fully automatic, fast, reliable Generator: Intelligent GF AC Cut, real-time spark control Surface Finish: up to Ra 0.1–0.2 μm (after finishing cuts) Control System: AgieVision (ergonomic, touch display, 3D graphics) Dielectric: Deionized water Machine Dimensions (LxWxH): approx. 2200 × 2200 × 2200 mm Machine Weight: approx. 3500–4000 kg

Condition: good (used), Hohner Economy 25/40 Wire Stitcher Very good condition. A reliable machine with legendary durability. Technical specifications: Capacity: 206 cycles/min Sewing thickness: 25mm (punching up to 40mm without closing the staple from the bottom) Wire diameter: max. 1mm Power supply: 380V Weight: 240kg The machine has an adjustable table for block and booklet stitching. Gkjdsxk U Hdopfx Afijc

Year of construction: 2016, condition: like new (used), functionality: fully functional, Complete line for steel wire fibres production, Model M-1 ZSN 35 Fibre bending and cutting machine Machine type: M – 1 ZSN 35 Dimensions and weight: 1200 x 1050 x 1620 mm; 1200 kg Material to process: Low carbon steel wire %C 0.05 ÷ 0.12 Gkjdpfjwu Dadjx Afisc Product to process: Hooked end fibre 0.75 x 35 / Hooked end fibre 1.00 x 50 Max. number of wires to process: 15 Wire pay-off device Dimensions and weight: 5220 x 2500 x 2008 mm, approx. 2200 kg Number of spools: 15 Max spool weight: 1000 kg Wire diameter range: 0.6 – 1.2 mm Spool type: Z2, Z3 PRICE: 190,000 EUR

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Gedpfxotylpcs Afiokc

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 25227, conveyor belt width: 60 mm, punching force: 7 t, Two Bihlers are for sale. Price per piece A reel is available if needed. Godpfx Afov Nv Dljiskc

Condition: new, The Neospark T 500 is an advanced Wire Cut EDM machine from the renowned brand KNUTH, known for its precision and efficiency in electrical discharge machining. This high-performance machine is ideal for companies specializing in mold and tool making, providing exceptional cutting capabilities for electrically conductive materials, especially when separating 3-D printed components from their base plates. The Neospark T features a rigid cast-iron frame with precision-machined surfaces, ensuring permanent mechanical precision through its advanced linear guides and preloaded ballscrews on all axes. Operating costs are notably low thanks to its cost-effective design, while the user-oriented IPC-based 4-axis control system enhances process reliability. Moreover, it includes a specialized aluminum cutting function that extends wire life and minimizes the risk of breakage during machining. With features like a central lubrication system, easy setup via handheld controls, and integrated CAD/CAM software, the Neospark T 500 is a robust choice for professionals seeking efficient and reliable Wire Cut EDM solutions. To explore this product further, request a quote today. Gkedewt Du Sopfx Afisc

Condition: good (used), Year of construction: 2006, functionality: fully functional, Travel (X/Y/Z): 350 × 250 × 250 mm Max. workpiece dimensions (X/Y/Z): 750 × 550 × 250 mm Max. workpiece weight: 200 kg (450 kg) Max. taper angle +/- 30°, 100 mm (U/V) travel: +/- 70 mm Automatic wire threading Wire diameters: 0.10–0.33 mm AGIE IPG generator with power module Gjdpexmu R Ujfx Afijkc Machine dimensions (mm): 1640 × 2040 × 2220 mm Machine weight: 3350 kg Cooling external cooling required Best surface finish Ra 0.2 µm Year of manufacture: 2006 Fully functional

Year of construction: 2020, condition: used, For sale: Automatic 2D Wire Bending Machine WL-YZ-8K Designed for processing soft wire with a diameter of 3–8 mm and hard wire of 3–6 mm. Gkjdpfx Afjxapv Ssiec Key benefits of the machine: Technical specifications: - 4 axes - Total machine power: 7 kW - Maximum wire feed speed: 60 m/min - Maximum wire feeding deviation (depending on material): ±0.2 mm - Supplied with a wire coil decoiler (coil weight up to 350 kg) - Includes a complete set of parts for processing wire diameters: 3, 4, 5, 6, 7, and 8 mm - Model: WL-YZ-8K - Manufacturer: Hwashi

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Gsdpfetylpijx Afiskc