Used Wire Binding Machine for sale (68,960)

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, workpiece height (max.): 420 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, GF AgieCharmilles Progress VP3 Year of manufacture: 2013 Travel ranges: X = 500 mm, Y = 350 mm, Z = 426 mm Lredpfx Aezlxrajf Sjt Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in the bath) / 800 (without the bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Includes AGIEJOGGER hand box for comfortable setup AGIE IPG-V generator AGIEVISION 5 control Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned and overhauled after receipt of your order. You will receive a 6-month warranty on all machine parts. We would also be happy to offer commissioning and training.

Condition: used, Year of construction: 1998, Sodick AM 35 CNC EDM Machine Model: AM 35 Year: 1998 Control: Neuro Fuzzy II 40: ‘X’ axis Travel: 350mm ‘Y’ axis Travel: 250mm ‘Z’ axis Travel: 250mm Tank Dimensions: W 790 x D 590 x H 320mm Max. electrode weight: 50 kg Lrsdpfx Aswqgh Ajf Sst Max. Table Load: 550 kg With: Magnetic chuck 350 x 250mm

Year of construction: 1970, condition: ready for operation (used), Equipment: wire pay-off reel, mechanical flywheel, two wire guide tracks, enclosed straightening and cutting section, mechanical cam, eccentric and lever controls, discharge chute for cut wires, pneumatic service unit and pneumatic lines, retrofitted control panel with digital display, emergency stop button and transparent safety cover. An on-site inspection is possible. Lrjdpfxozqu Hqo Af Sst

Condition: used, Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781/1L50 FR Serial-No. 1793 Ljdpfxexvdmdo Af Ssrt Heftdicke / Staple thickness 0-8mm Heftarmlänge / Staple Arm length 50cm Heftarmbreite vorn / Handle width at the front 10mm Klammerrückenlänge innen / Bracket Back Length Inside 12mm Heftdraht Runddraht Nr. 21 - 23 / Flachdraht II - IV Staple Wire Round Wire No. 21 - 23 / Flat Wire II - IV Heftgeschwindigkeit 250 Klammern pro min / Stapling Speed 250 staples/min Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Block- und Broschüren-Drahtheftmaschine Pad and Booklet Wire Stitching machine Lredpfjzkwa Hox Af Sjt Drahtheftmaschine / Wire Stitching Machine AGRAFIX BX Serial-No. 1268 1 Drahtheftmaschine für Block- und Sattelheftung. 1-head wire stitcher for block- and saddle stapling. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Wire Stitching Machine Polygraph 703/1T Drahtheftmaschine / Wire Stitching Machine Polygraph 703/1T 1-head wire stitcher for block- and saddle stapling. Lredpfx Afjyywzxj Sot Year - Serial-No. 21/4 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2002, machine/vehicle number: 13116, Bindemaschine - Binding machine GBC Sure BindYear 2002 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Ljdpfx Aeh Axa Ejf Ssrt On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 13115, Spiralbindemaschine - Spiral binding machine Lamirel Ledpfx Afoh Axnvs Sjrt Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Drahtheftmaschine - Wire Stitching Machine Polygraph 103Serial-No. 6875 Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Lrsdpjh Ax Ufefx Af Sjt On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 13113, Bindemaschine - Binding machine Esselte 3000 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Ljdsh Axazjpfx Af Sjrt

Condition: used, Year of construction: 1992, machine/vehicle number: 190121, Wire Stitching Machine AGRAFIX BX1-head wire stitcher for block- and saddle stapling. Year 1992 - Serial-No. 190121 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Lodpeh Ayf Tsfx Af Sort

Condition: used, machine/vehicle number: 9003, Spiralbindemaschine - Spiral binding machine FOELL 33 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Ledpfx Ajrgb Aqsf Sjrt Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Spiralbindemaschine - Spiral binding machine Gestetner 220 Lrjdpfxsh Ax Nwj Af Sst Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1991, machine/vehicle number: 91040170, 2 Head Wire Stitching Machine Hohner ACCORD 25/402-head wire stitcher for block- and saddle stapling Year 1991 - Serial-No. 91.040.170 Online-Video-Inspection by Skype-Video Ledpfjn Apntsx Af Sort We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 8170126, Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781Kartonagenhefter / Carton Stitcher Typ / Model 781/1L75FR Serial-No. 8170126 Armlänge / Arm length 75cm Fußpedal / Foot pedal Online-Video-Inspection by Skype-Video Lrjdpfx Aoiiilqef Sjt We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2007, table length 500 mm table width 350 mm ampere 65 A Control AGIEVISION 5 CNC total power requirement 20 kW weight of the machine ca. 4000 kg dimensions of the machine ca. m A G I E (Switzerland) CNC - Controlled Wire Cutting EDM Machine Model AGIECUT PROGRESS V 3, Year 2007 Working range, X Y Z (=height) 500 x 350 x 426 mm Wire head, U-V axis (helical/taper cuts) + / - 30 °/ +/- 70 mm Resolution of axes 0.0001 mm Speed for positioning the axes up to 3 m/Min. Tolerances (If machine is new) 4 µ Workpiece dimensions, L x W x H max. 1.050 x 650 x 420 mm Max.weight of workpiece with/w.o. Dieelektricum 400/800 kg Clamping System Universal Beams with fixing holes Cutting wire Ø 0.2 – 0.33 mm Size of wire roll up to 25 kg Cutting speed of wire 60 – 300 mm/s. Total electrical load, approx. 20 kW - 400 V - 50 Hz Weight, approx. 4,000 kg Dimensions of machine approx. 2.4 x 2.2 x 2.4 m Accessories / Special Features • AGIEVISION 5 CNC Path Control for 5 Axis with OS 2 Machining Version and With various subprogrammes for a easier and faster designing of machining programmes, Technology devices, PP 123 Agie Geometric helps, DNC-Connection,Graficheck in 2 D a. 3 D, Rethreading of wire when wire is cutted-off, Optimizing the programmed pathes, PURECUT for reduction of Oxidation on workpiece surface,10 various program-languages, and many more features. • Mobile electronic hand held control unit for manual adjustments and set-ups for new workpieces, and separate standing control panel with CD-recorder and large monitor. • “DA” PROGRESS integrated Dieelectricum Aggregate with chiller and Filtering System, large tank incorporated in machine’s basement, Koax flushing, • AGIE Generator with 65 A Capacity and cutting performance up to 300/450 mm² • AGIE Automatic Wire Threading System with wire shredder and container mounted in backside of machine. Condition : Very good. The machine comes from a first class tool and die shop. It has been kept in very good order and was regularly maintained. Delivery : Ex stock, as inspected. Lsdpfxot Hxbke Af Ssrt Payment : Net, after conclusion of contract.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, TECHNICAL DETAILS X-axis: 550 mm Y-axis: 350 mm Z-axis: 400 mm U-axis: 550 mm V-axis: 350 mm Machining Taper: ± 30° Automatic wire threading and re-threading: Yes Maximum workpiece dimensions: 1,200 × 700 × 400 mm Control and Dielectric Fluid CNC control: CHARMILLES Dielectric fluid tank: 1,200 l Filter system: Cartridge filter Ledpezpxg Ssfx Af Sert MACHINE DETAILS Machine weight: 3,500 kg EQUIPMENT - Cooling unit

Condition: used, Year of construction: 2003, operating hours: 34,621 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 34621 Std Verfahrwege X 350 mm Y 220 mm Z 220 mm Lodpfxjzkhlts Af Sert U 350 mm V 220 mm Year 2003

Condition: used, Year of construction: 2003, operating hours: 25,407 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 25407 Std Lodpfxezkhgdj Af Sort Verfahrwege X 350 mm Y 220 mm Z 220 mm U 350 mm V 220 mm Year 2003

Condition: good (used), Year of construction: 2008, functionality: fully functional, working width: 560 mm, type of input current: AC, infeed height: 340 mm, empty load weight: 3,200 kg, infeed width: 560 mm, Equipment: documentation/manual, Smyth 150 4D Large Thread Sewing Machine, 2008 The machine is still connected to the power supply and has very few operating hours, as it was only used for half shifts! Format ranges & performance: Maximum sheet format: 560 x 340 mm Minimum sheet format: 135 x 80 mm Maximum mechanical speed: 150 cycles/minute Number of stitches: 13 stitches Stitch length: 24 mm Feeder & opening system: Lrjdpfxezpfiyo Af Sot Feeder type: Automatic sheet feeder (4D-Stream Feeder) Opening devices: 4 upper suction devices + 4 lower suction devices (4+4 openings) Overlap opener: Integrated LAP opening system (suction opening for signatures with overlap) Equipment & control: Operation: Computer-controlled setup via a swiveling color touchscreen display Total machine weight: approx. 3,200 kg Video available upon request!

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 12.30 315/2, working width: 1,000 mm, Equipment: documentation/manual, Tünkers Laminating Machine Type Vorwärts 1100 Lrsdpfx Afjy D D A Do Sst Fully automatic, both carrier sheet and cover sheet are processed automatically. Suitable for a wide range of applications: corrugated board, cardboard, semi-board, fabrics, films Max. format 1000x1400 mm Min. format 200x280 mm Carrier material weight approx. 250 g/m² – approx. 5 mm Cover material weight approx. 80 g/m² – approx. 800 g/m² Up to 2,000 laminating cycles per hour Documentation & circuit diagrams available. Incoterm FCA Oberhasli, Incoterms® 2020 – loaded on truck The machine is in operation and can be inspected.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 4,100 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, overall weight: 2,640 kg, TECHNICAL DETAILS Workpiece weight (max.): 4,100 kg Travel range, X-axis: 350 mm Travel range, Y-axis: 250 mm Travel range, Z-axis: 250 mm Travel range, U-axis: ±45 mm Travel range, V-axis: ±45 mm Ledpfx Afozi D Ube Sjrt Max. taper angle: ±10° Max. workpiece dimensions: 820 mm x 680 mm x 250 mm Table dimensions: 700 mm x 480 mm MACHINE DETAILS Machine weight: 2,640 kg

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 300 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 260 mm, total height: 1,800 mm, total length: 1,650 mm, total width: 1,150 mm, wire diameter (max.): 18 mm, workpiece height (max.): 400 mm, workpiece width (max.): 580 mm, workpiece length (max.): 580 mm, type of input current: three-phase, table width: 600 mm, overall weight: 1,700 kg, table length: 600 mm, table height: 380 mm, empty load weight: 1,400 kg, warranty duration: 12 months, table load: 300 kg, input voltage: 400 V, quill travel distance: 80 mm, quill diameter: 6 mm, quill stroke: 80 mm, stroke length: 80 mm, tank capacity: 110 l, cutting speed: 600 mm/min, input current: 6 A, positioning accuracy: 2 mm, Equipment: documentation/manual, Digima DK7732 CNC EDM Wire Cut Machine – 320 × 400 mm Product Description The Digima DK7732 is a compact CNC EDM wire cutting machine designed for precise machining of small and medium-sized metal components. It is suitable for tool rooms, mould and die production, maintenance workshops, precision engineering companies, as well as single-piece and batch production. The machine provides an X/Y working travel of 320 × 400 mm, a 380 × 600 mm worktable, a maximum workpiece height of 400 mm, and a maximum permitted workpiece weight of 300 kg. Its rigid construction and machine weight of 1,400 kg help reduce vibration and support stable, repeatable machining. EDM wire cutting technology allows the machine to produce accurate contours, narrow slots, holes and complex shapes in electrically conductive materials, including hardened metals that may be difficult to process using conventional cutting tools. Main Advantages CNC-controlled EDM wire cutting machine Compact design suitable for smaller production areas X/Y worktable travel of 320 × 400 mm Large 380 × 600 mm worktable Maximum workpiece height of 400 mm Maximum workpiece weight of 300 kg Stable 1,400 kg machine construction Suitable for complex contours and precision components Designed for mould, die and tool production Suitable for single-piece and serial production Low operating energy requirements Reduced molybdenum wire consumption Suitable for long, continuous machining cycles Technical Specification Parameter Specification Brand Digima Model DK7732 Machine type CNC EDM wire cut machine Condition New Worktable dimensions 380 × 600 mm X/Y worktable travel 320 × 400 mm Maximum workpiece height 400 mm Taper capability 6° / 80 mm Maximum workpiece weight 300 kg Machine net weight 1,400 kg Machine dimensions 1,650 × 1,150 × 1,800 mm Control system CNC/MNC Movement method Linear control Control method Open-loop control Processing accuracy 0.01–0.02 mm Molybdenum wire diameter Ø0.13–Ø0.18 mm Maximum wire speed 600 m/min Maximum cutting speed 200 mm²/min Best surface roughness ≤ Ra 0.8 µm Maximum working current 6 A Rated power 2 kVA Water tank capacity 110 litres Water filtration accuracy 0.005 mm Application Electrically conductive metal materials With a stated processing accuracy of 0.01–0.02 mm, cutting speeds of up to 200 mm²/min, and a best surface finish of up to Ra 0.8 µm, the DK7732 is suitable for applications where dimensional accuracy and surface quality are important. Stable and Economical Operation The DK7732 is designed for stable processing, relatively fine surface quality, low energy consumption and reduced molybdenum wire wear. It is particularly suitable for users who prioritise economical operation and long continuous machining cycles rather than exceptionally high cutting productivity. Delivery and Availability Availability: available Estimated delivery time: approximately 90 working days Transport and installation conditions: to be agreed individually Availability and delivery information should be confirmed before placing the final order. Why Choose the Digima DK7732? Lsdpfxsznttde Af Sort The Digima DK7732 combines a practical working range, rigid construction, high workpiece capacity and economical EDM technology. It is a suitable solution for companies looking for a compact wire cutting machine for accurate machining of moulds, dies, tools and specialised metal components.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 396-900-115-0108, workpiece weight (max.): 2,890 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,000 mm, total length: 2,020 mm, total width: 2,050 mm, workpiece height (max.): 250 mm, workpiece width (max.): 900 mm, workpiece length (max.): 680 mm, Ορίστε μια σύντομη, επαγγελματική και περιεκτική περιγραφή που μπορείς να χρησιμοποιήσεις: GF AgieCharmilles CUT 20 P – Wire EDM Machine Well-maintained AgieCharmilles CUT 20 P wire erosion machine in excellent working condition. Features the Performance Package for higher cutting speeds and superior surface finish. Year of Manufacture: 2011 Travels (X / Y / Z): 350 x 250 x 250 mm Max. Workpiece Dimensions: 900 x 680 x 250 mm Max. Workpiece Weight: 400 kg Features: Automatic Wire Threading (AWT), IPG Generator, integrated dielectric filtration unit. Ready for inspection under power. Lodpfjzncqlox Af Sjrt

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, total height: 2,875 mm, total length: 2,870 mm, total width: 2,670 mm, workpiece height (max.): 510 mm, workpiece width (max.): 900 mm, workpiece length (max.): 1,450 mm, overall weight: 6,300 kg, GF AgieCharmilles CUT 400 Year of manufacture: 2011 Control system: Charmilles Millenium Travel ranges (X / Y / Z): 800 x 550 x 510 mm Travel ranges (U / V): 800 x 550 mm Max. conical angle: +/- 30° at a height of 510 mm Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Includes option for a large wire spool with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg Lredpfxjzhlvko Af Sot The machine will be cleaned, completely overhauled, and tested for all functions after order receipt. Optional: - Commissioning of the machine at your location - On-site training - Cooling unit - Transportation - Clamping device set