Used Wilhelm for sale (128)

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 558/0-112, Weight approx. 1950 kg control panel 1888 Pre-milling unit 1961 edge feeding unit 1901 Hjdpfxoh Uyg Es Adaeh tracer nozzle printing unit 1913 MOT cross-cut unit 1918 Milling unit 1942 top Milling unit 1942 top/bottom for round milling scraper 1929 Form milling unit 1983 Surface scraper 1964 Buffing unit 1944 length approx. 5900 mm Connected load 21.4 A

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 96123, Connected load 380V 46A planing width 180 mm planing height 120 mm length of table 2300 mm 4x Leitz reversible knife heads with 4 knives each Hjdpfx Ajh U Db Iodaeh 2x feed speeds electric height adjustment 4x star-delta switch 2x low pressure holder 1x side pressure holder 2x steel feed shafts 1x rubberized pull-out roller Suction connection 4x120 mm

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 3750, Machine glues solid wood up to 18.0mm and roll goods up to 3.0mm Cutting from the roll 3.0mm thick PVC, ABS, and real wood up to 2.0mm Flush chamfering 18mm Rounding and chamfer milling stations Total length 3.20m Power consumption 7.1 kW Glue container Cutting shears Infinitely variable feed Cutting saw for front and rear edge Hsdpfx Aeigad Eedaeh Flush milling unit Rounding milling unit Chassis Extraction connection 100 mm

Condition: not inspected (used), Year of construction: 1975, Power supply 400V 13kW Hsdpfx Aokkflbsdajh 2 heating plates à 1200 x 2250 mm heating plates controlled by 2 thermostats pressing pressure at 250 bar LxDxH: 2590 x 1330 x 1950 mm weight approx. 2800 kg pressing thickness 380 mm

Condition: not inspected (used), Year of construction: 1984, Connected load 380V 9A Motor power 4kW Cutting height 460 mm Cutting width 770 mm Extraction 120 mm Height of the machine approx. 2500 mm Panhans band saw guide above and below Saw blade length 5700 mm Hodevt Ttlepfx Adash

Condition: reconditioned (used), Rated motor power 2.2kW/5.2A Rated voltage 380V / 50Hz / ~3Ph Rated volume flow 1350 m³/h Rated negative pressure 2850 PA Main switch + start and stop Manual filter cleaning Suction nozzle 140 mm Hedpfx Aov Azcyedash 1 container diameter 800 mm

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, Nominal volume flow Vnenn 750 m³/h, suction nozzle D=100 mm, minimum volume flow Vmin 565 m³/h, negative pressure 14.5 mbar, motor 1.1 kW, nominal speed 2860 rpm, connection 380V 3Ph 50Hz - Hsdev Azfzspfx Adajh

Condition: not inspected (used), Year of construction: 1994, Connected load 380V / 2.2 kW Weight approx. 212 kg Cutting width 900 mm Sliding table Angle stop swivels to 45° Homemade table extension 350 mm long 1000 mm wide Homemade saw blade guard PSV Unit swivels to 45° Manual height adjustment Extraction nozzle 100 mm Parallel stop missing Ruler stop missing Hodpfxjvz Tfqj Adaoh

Year of construction: 1995, condition: not inspected (used), Connected load 380V 55A PMS control Pre-milling unit 1961 Magazine 1901 Glue station 1906 Printing unit 1926K Snipping unit 1916 Flush trimming unit 1962 Hjdonxkm Espfx Adajh Profile trimming unit 1966, 3 mm rounding up to 15 mm flush Rounding scraper 1927 Shaping trimming unit 1983 Buffing unit 1941 Extraction 1x160 1x125 mm Compressed air connection 6 bar

Condition: reconditioned (used), Year of construction: 1993, functionality: fully functional, Weight approx. 1140 kg Connected load 380V 7.5kW Hsdpfx Adjq Au Hujaeh Scoring unit 0.75 kW manually adjustable via pneumatic connection, can be raised and lowered Trimming length 2800 mm speeds 600/5000/4000/3000 rpm via V-belt Electric tilt with digital display Electric height adjustment with digital display Cutting width 1000 mm rear support table 950 x 400 mm wide angle fence 2500 mm with extension 2840 mm with 2 stops suction connection 120 mm + 80 mm for PSV Parallelogram protection device with narrow and wide hood Trimming fence Air requirement for scorer 6bar connection

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, Power rating 380V Planer block motor 4kW 8.3A Hodpfx Adev Up R Ajash Feed motor 1x0.37kW 1x0.55kW 2x feed speeds 7 + 14 m/min Star-delta switch Planing thickness adjustable with hand crank Planing width 510 mm Leitz reversible cutter block with 2 knives 2 table rollers Extraction connection 140 mm

Condition: reconditioned (used), Year of construction: 1991, functionality: fully functional, grinding width: 1,100 mm, "M.-No. 2679, built 1991, Technical data: max. working width: 1100 mm, min./max. workpiece thickness: 3 / 160 mm, sanding belt dimensions: 2150 x 1120 mm, sanding belt speed: 18 m/sec., feed speeds: 4 + 8 m/min, Motor power sanding unit: 11 kW, power setting: 0.55 kW, feed carpet: 1.3/1.8 kW, operating pressure: 6 bar, air requirement: 10 l/min., extraction sockets: 1 x 150 + 1 x 120 mm, WxDxH: 1800 x 2000 x 2100 mm, weight approx. 2400 kg, Standard equipment: - Contact roller D=150 mm, hardness 90° Shore - Air sanding pad with automatic insertion and removal - Rigid sanding pad for solid wood frame sanding - Brush roller driven by the sanding unit - Automatic centering of the feed carpet - Feed carpet with high-quality rubber circular hole carpet and auto. Carpet centering - pneumatic sanding belt tensioning with length compensation - non-contact sanding belt oscillation, electronic - low-wear disc brake system for immediate stop of the sanding belt drive with pressure monitor - motorized thickness adjustment with digital display - workpiece thickness limiter at the infeed - semi-automatic workpiece thickness adjustment - grit thickness compensation for contact roller 4-fold, special accessory: workpiece thickness gauge". Hedpfxstppz Io Adajh

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 221/93, Connection value 380V 16A Pneumatic connection 6 bar Hodpsk Tzwdefx Adajh Total length of the machine 4300 mm Total machine width 1300 mm maximum pressing length 2650 mm Press width 1000 mm Press height 1000 mm Press pressure up to 150 bar electrical width adjustment with digital display Footswitch for pressing

Year of construction: 1999, condition: repair required (used), machine/vehicle number: AL 1 / 99, Connection 9,0 kW 400 V Compressed air connection 6 bar Hodpjiiy E Tjfx Adaeh suction 1x160 mm 3400 m³/h 30 m/sec Compressed air consumption 200 NL/min drilling spindles 9 pcs / 3000 rpm grooving spindle 1 pc / 6000 rpm milling spindle 1 pc / 16000 rpm LxWxH 4050 x 2050 x 1900 mm weight approx. 1500 kg max. plate thickness 55 mm

Condition: not inspected (used), M.-No. 105813, built in 1988, max. air flow 6500 m³/h, motor power 2kW, with heat exchanger, 1" water connection, LxWxH: 2150 x 820 x 820 mm, 2 return air ducts 2000x950x400mm, 1 return air duct 950x950x400mm, external wall connection 700x700mm, bird screen 660x590mm, heat exchanger outlet 400x400mm, WITHOUT connections to return air ducts Hjdpfx Adewhncpsajh

Condition: reconditioned (used), functionality: fully functional, 4 speeds 3000/6000/4500/9000 rpm. right/left rotation Spindle lock by foot control Milling stop with fine adjustment spindle diameter 30 mm suction top+bottom each 120 mm Hedjittnzopfx Adaeh spindle wrench open-end wrench 41 mm Cable + plug 16 Amp.

Condition: reconditioned (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 116680, Connected load 380V 11A planing width 630 mm planing height 250 mm feed rate 8-20 m/min suction socket 160 mm weight approx. 870 kg Hsdpfsh U A Evjx Adash rubberized infeed and outfeed roller two-knife shaft with strip planing knives Central lubrication Planing height via handwheel adjustment Star-delta switch

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 690924, Connected load 380V 1,84kW speed 2840 rpm number of spindles: 21 pieces, pitch 32 mm spindle distance 640 mm spindle rotation direction 11xright 10xleft M10 thread Hedpfx Ash U Damedaeh 2x safety clamps pneumatic foot valve table size 880 x 400 mm 1x side stop with 2 folding stops 1x basic fence 1x miter fence Unfortunately, we cannot answer inquiries without complete contact information.

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 70008248, Nominal volume flow 35 m³/h Operating pressure max 16 bar connected load 220V 1,1A Pipe connection 1/2". Bekomat condensate drain Control panel weight approx. 23kg Hsdpsh U Da Aefx Adaoh Operating instructions

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 50984, 3 rows of 8 filters 4 bags Filter area 31,2 m² RH 3500 mm fan 5,5 kW diam. 250 mm on 300 x 240 mm Brackets Hsdpfoiamtpsx Adajh Feet Cover and filter bags Unfortunately, we cannot answer inquiries without complete contact information.

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 9958, Power supply 380V 7,3kW suction 1x120 mm 1x180 mm Hsdoiau Tlepfx Adash grinding table 2850 x 1550 mm sanding belt dimensions 7820 x 150 mm table height adjustment via hand wheel LxDxH: 4400 x 1700 x 1450 mm weight approx. 1100 kg

Condition: used, functionality: fully functional, 0,75 kW Spraying device Lamella star 150/70/25 mm sisal/leather/plastic fabric Lamellar star 150/70/25 mm sisal/plastic fabric Flanges 70 mm reduced to 11 mm (2 pcs.) Metal Hjdpfsigaf Rjx Adaoh Control panel top 4 motors à 0,18 kW for brushes

Condition: repair required (used), Connected load 380V 3.6A, total height 2900 mm, table height adjustment with handwheel, 5 speeds: 275/450/810/1400/2000 rpm, V-belt guard self-construction Hjdpfoiyp R Rsx Adaeh

Condition: excellent (used), Roller conveyors in lengths 5000 +6000 mm width 600mm with felt or oil tracks for laying. Hjdpfx Ajmt D Rajdaeh several times available! Please request

Condition: as good as new (ex-display), Year of construction: 2023, saw blade diameter: 300 mm, cutting length (max.): 4,300 mm, cutting height (max.): 2,110 mm, cutting depth: 80 mm, power: 5.5 kW (7.48 HP), Equipment: scorer, Holz-Her vertical panel saw with TRK extraction system Type SECTOR 1262 automatic Cutting height 2200 x cutting length 4300 mm, cutting depth 80 mm Motor power: 5.5 kW Hodpfx Adotwpgmoaoh Automatic saw feed for vertical and horizontal cutting, infinitely variable from 6-25 m/min. incl. the following accessories: - CE extraction unit - Pneumatic aluminum sliding grid - center workpiece support - longitudinal stop with digital dimension display - strip stop - digital dimension display for horizontal cut on the control panel - 3 adjustable stop points in the saw beam - SuperCut scoring device incl. 2 WPL knives - Narrow parts unit (2 pieces)