Warp Knitting Machine

Wilhelm Kneitz SiTnet

Condition: like new (used), Year of construction: 2023, operating hours: 2,400 h, functionality: fully functional, machine/vehicle number: R40410, power: 371.43 kW (505.00 HP), empty load weight: 75,000 kg, cutting force: 900 t, COPEX REFLEX 900 ton mobile diesel shear baler (year 2023). Maintenance carried out by the manufacturer. Output: 10 to 22 t/h depending on the type of scrap to be sheared. Immediately available. Hfjdpfjxg Ekfsx Ahvjd

Year of construction: 2018, operating hours: 100 h, condition: as good as new (ex-display), Klieverik laminating calender with few operating hours. Approx. 100h. The machine can be inspected on site. Condition as new. The machine has never been in serial production. Hfjdpfohd N Dasx Ahvjd Sale from place.

Year of construction: 2009, condition: new, Three-front weaver Karl Mayer control panel We also have the 3 servo motors Hjdpfx Ahohva Twovsfd

Condition: used, Year of construction: 2015, operating hours: 82,000 h, functionality: fully functional, type of input current: AC, power: 220 kW (299.12 HP), input voltage: 400 V, rotational speed (min.): 1,500 rpm, empty load weight: 12,500 kg, For sale: Biogas CHP unit (BHKW) Fully functional CHP unit in container (dimensions: LxWxH = 7x3x3 meters, excluding the rooftop fan, weight: 12.5 tons) The unit will be decommissioned once the two new CHP units are operational, approximately summer 2026. The CHP was operated under a service contract with IWK. The last major overhaul (turbo, pistons, liners, heads, catalyst) was carried out in May 2025 at 77,500 operating hours. Service is performed every 2,000 hours. The unit can be inspected on site and in operation. Hfjdpfxjx A A Sfo Ahvjd The CHP is sold as-is, without warranty, ex location. Transport costs to be borne by the buyer.

Condition: used, Year of construction: 1988, functionality: fully functional, For Sale: Several 6 pcs. Jakob Müller MVC 150s first generations are for sale: MVC 150 8/46mm 1988 88.60237 no. 309 MVC 150 8/46mm 1988 88.60085 no. 319 MVC 150 8/46mm 1988 88.60319 no. 332 MVC 150 10/36mm 1988 88.60041C no. 314 MVC 150 10/36mm 1988 88.60041B no. 313 MVC 150 6/66mm 1988 88.60000 no. 307 Hfodpfxsv Hxlte Ahvod Year: 1988 Condition: well runnig and complete Price: €3,900

Condition: excellent (used), Standard boiler 30 t/h. Year of manufacture: 2012. Equipped with two oil burners. Hfodpfx Ahexgn Itsvsd

Condition: used, Year of construction: 1991, For sale 10x Jakob Müller Frick CH MVC 150 Müdata 4 Label Loom We only sell as a set for €50,000 Each loom €5,000 1989 in 12/30mm, To: 89.30018 Müdata 4, No. 70 1990 in 12/30mm, To: 90.30452 Müdata 4, No. 71 1990 in 12/30mm, To: 90.30370 Müdata 4, No. 72 1990 in 8/46mm, To: 90.30337 Müdata 4, No.325 1991 in 12/30mm, To: 91.30247 Müdata 4, No. 73 Hedpfx Aov T Nb Sjhvofd 1990 in 7/57mm, To: 90.30166 Müdata 4, No. 76 1990 in 7/57mm, To: 90.30461 Müdata 4, No. 77 1990 in 9/36mm, To: 90.30371 Müdata 4, No. 78 1990 in 9/36mm, To: 90.30080 Müdata 4, No. 79 1991 in 7/57mm, To: 91.30312 Müdata 4, No. 80 all looms are nice and well running

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Hjdpfjhg Rcxex Ahvefd Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: new, Year of construction: 2024, functionality: fully functional, total width: 4,100 mm, total length: 9,300 mm, table width: 1,800 mm, table length: 7,200 mm, number of rollers: 2, For Sale: New 12-Head Universal Roll-to-Roll Embroidery Machine (ZSK) This cutting-edge 12-head portal embroidery machine is engineered for professional roll-to-roll use, offering outstanding precision, efficiency, and versatility for high-volume textile manufacturing. Key Features: - 12 Heads, Each with 12 Needles – Features 400 mm head spacing and automatic head selection for efficient workflow. - Cording Functionality – Equipped with 6x EP1.2 cording devices (mounted on heads 1, 3, 5, 7, 9, 11) for advanced decorative stitching. - C-Shaped Frame – Optimized for seamless fabric transport and collision-free operation. - Dual Roll-to-Roll Feeding – Supports simultaneous processing of two materials with left-to-right controlled feed. - Max. Roll Diameter: 600 mm, Max. Weight: 60 kg, Core Diameter: 76 mm. - Upper Roll: Actively driven for precise fabric tensioning. - Lower Roll: Equipped with a high-precision braking system. - Edge Control – Automatic system for consistent fabric alignment. - Adjustable Working Width – From 1,400 mm up to 1,700 mm to suit various projects. - Clamping & Stretching – Pneumatic aluminium clamping on all four sides for two materials, max. frame size 1,800 mm x 7,200 mm. Hodpfx Ajxcnl Rohvefd - High-Speed Embroidery – Capable of up to 900 stitches per minute for rapid production. - Advanced Controls – T8-3 machine controller, automatic bobbin changing system with 2 magazines per head (8 bobbins per head). - Safety & Monitoring – Integrated light barriers (top and bottom) with clear red/green status indicators. - Professional Digitizing – Includes EPCwin CAD software for embroidery design and programming. This machine delivers high productivity and reliable automation, making it an optimal investment for industrial textile manufacturers seeking top-tier output and consistent quality results.

Condition: used, Year of construction: 2018, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 8945646465, total width: 2,000 mm, total length: 12,000 mm, total height: 1,800 mm, overall weight: 3,500 kg, air demand: 1 m³/h, Digital textile printing machine, pigments inks, GOTS and Oekotex 100, class baby articles, printing width 1.80m Technical specifications - Ink type: Kornit NeoPigment™ Intenso, water-based - Color channels: 7 (CMYK + Red, Green, Grey) - Pre-treatment: integrated 8th channel - Print heads: 64x Spectra Polaris (recirculating) - Print width: up to 180 cm - Print speed: up to 200 m²/h - Print resolution: 400–1200 dpi (recommended 600 x 600 dpi, 6-pass, interlaced) - Ink capacity: 4 liters per color - Weight: approx. 3,500 kg - Power supply: 3-phase, 25 kW, 110/220 V, 50/60 Hz Hfodsw Tynmepfx Ahvjd