Used Wet Grinders for sale (1,929)

Year of construction: 2025, condition: used, functionality: fully functional, HUSQVARNA Cut-Off Grinder K 4000 Wet — Year of manufacture 2025 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Gedpfx Ajy A Hdhen Rebl Price EUR 800 plus VAT | EXW Einbeck | Delivery upon request

Condition: new, Year of construction: 2026, -Smart Safety Clean Air Enhanced Efficiency. -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility. -Fire & Explosion Prevention: Effectively minimizes hazardous particles and ignition sources right at the source. -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment Gbedpfx Anevg U Dxo Rol Seamless Integration: Compact, space-saving design allows for easy installation into existing machinery and workflows. Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety.

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Gbedpsq Nx Alefx An Rjl Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: new, fuel type: electric, Year of construction: 2026, machine/vehicle number: 2700x4500, Equipment: low noise, Main Technical parameters of the ball mill Drum diameter: 2400mm Drum length: 4500mm Motor power: 320KW Max input size: 25mm Capacity:35-60 t/h Godpfx Ansq Igiie Robl Weight: 72Tons Ball loading: 30Tons Besides this model, we also have the other models like 2700x4500, 3200x4500, 1830x13000mm, and so on, and we can also offer customerization service, we can also provide complete grinding solution for various industries like cement, quartz, ore beneficiation plant, and so on, welcome to contact us for more info. A ball mill is a common grinding machine used to grind and blend materials for use in mineral processing, including ore mining and the production of silica (silicon dioxide). When it comes to ore mining and silica grinding, the characteristics of the ore and the final product requirements will play a crucial role in selecting the appropriate ball mill. Here are some considerations for using a ball mill in ore mining and silica grinding: 1. Ore Characteristics: - Hardness: The hardness of the ore determines the type of ball mill that is most suitable. Harder ores may require a more robust and wear-resistant ball mill. - Particle Size Distribution: The initial particle size of the ore affects the grinding process. Different ores may require different approaches to achieve the desired particle size. 2. Silica Grinding: - Silica Content: If the primary goal is to grind silica, it's important to consider the initial silica content and the desired final particle size. Silica grinding often requires special attention to prevent excessive wear on the milling equipment. 3. Ball Mill Type: - Overflow vs. Grate Discharge: The type of discharge from the ball mill can impact the final product and the grinding efficiency. Overflow mills are generally used for most grinding applications, while grate discharge mills are more suitable for certain types of ores. 4. Mill Size and Capacity: - Mill Diameter and Length: The size of the ball mill should be selected based on the amount of material to be ground and the desired throughput. - Capacity: Ensure that the chosen ball mill has the capacity to handle the required volume of material efficiently. 5. Grinding Media: - Material and Size: The choice of grinding media (balls or cylpebs) and their size depends on the hardness of the ore and the desired final particle size. Different grinding media materials can impact the purity of silica during grinding. 6. Liners and Lifting Aids: - Liners: Consider the type of liners used in the ball mill to protect the shell and optimize the grinding process. - Lifting Aids: Some mills use lifting aids to enhance the grinding action and promote better mixing of the material. 7. Control and Monitoring Systems: - Automation: Utilize control systems to automate the milling process and ensure optimal performance. - Monitoring: Regularly monitor the milling process to adjust parameters as needed for consistent and efficient operation. 8. Safety Measures: - Safety Systems: Implement safety features to protect personnel and equipment during operation. Always follow the manufacturer's recommendations and guidelines for operation and maintenance to ensure safe and efficient use of the ball mill in ore mining and silica grinding applications.

Year of construction: 1987, condition: ready for operation (used), Knife grinders for 800 kofama lignum strips Sharpening bar 800 used 1987 Rating: Table Model: 800 Description: Gbjdpfjh S Upisx An Rjl 800 grinders with a slat knife

Year of construction: 2017, condition: like new (used), Mobile fluid bed dryer on a trailer skit. included clothfilter. dryer survice is 5M2 Gbedpfx Anohflwgj Rsl

Condition: ready for operation (used), Tool grinder, tool sharpener, drill sharpener, Schanbacher S3-50 Manufacturer: Schanbacher Type: S3-50 Year: 2012 Gbedpfx Aex Dblton Rjl Dimensions: 460 × 600 × 1260 mm Drill diameter: 3–50 mm; Point angle: 90°–140° Includes: Protective cover, dust extraction system

Condition: excellent (used), Catalogue number: 7715 Godsy Ry Uiopfx An Rsbl TECHNICAL SPECIFICATIONS - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Bottom horizontal 220 mm 5.5 kW 2) Right vertical 130 mm 7.5 kW 3) Left vertical 130 mm 7.5 kW 4) Right vertical 130 mm 5.5 kW 5) Top horizontal 220 mm 11 kW – 5th spindle electrically adjustable up/down 6) Bottom horizontal 220 mm 5.5 kW 7) Bottom horizontal 220 mm 5.5 kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable vertically and laterally - Spindle diameter: 40 mm Feed system (top): - 6 double-toothed infeed rollers, driven, + 1 single roller - 3 double smooth rubber outfeed rollers, driven + 3 single rollers - Digital length counter Feed system (bottom): - Swivelling toothed steel infeed roller integrated into lower table - 3 smooth steel feed rollers - Feed drive via Cardan rollers - Pneumatic pressure rollers - Stepless feed speed adjustment + 2-speed gearbox: 10–60 m/min - Feed motor: 10 kW - Electric thickness adjustment - Body lifting motor: 0.75 kW - Centralised table lubrication - Extraction connection diameters: 5x140 mm, 3x120 mm - Machine dimensions (LxWxH): 4680x1780x1850 mm - Control cabinet dimensions (on pallet): 1020x1000x2230 mm - Weight: approx. 5000 kg ADVANTAGES - Equipped with 8 cutterheads - Universal spindle - Ideal for wet and dry timber - Made in Germany, WEINIG brand - Unpainted (original finish) - Very low operating hours - Used thickness planer, like new Net price: 165,900 PLN Net price: 39,500 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: good (used), Year of construction: 1998, feed length X-axis: 1,180 mm, feed length Y-axis: 644 mm, feed length Z-axis: 480 mm, table length: 1,000 mm, table load: 1,000 kg, table width: 595 mm, power: 15 kW (20.39 HP), X - Travel: 1180mm Y - Travel: 644mm Z - Travel: 480mm Table Length: 1000mm Table Width: 595mm Table load: 1000 KG Feed rate X-Axis:30000mm/min. Feed rate Z-Axis:30000mm/min. Power: 15kW Length: 4800mm Gbodpfx Anjwrx Scj Rjl Width: 2500mm Height: 2700mm Weight: 8000kg

Condition: good (used), Year of construction: 1970, grinding diameter: 1,200 mm, grinding length: 5,000 mm, Accurite digital readout Chuck diameter 900 mm Crank shaft head counter balance weight 2 x 4 different sizes  4 x steady rest dressing device  6 segment stone up to 1500 mm diameter In feed stone 0,0025 - 0,050 mm Table feed rate 50 - 3975 mm/Min Coolant & Filtration system Centre height: 600mm Grinding Ø: 1200mm Grinding length: 5000mm Grinding stone dimensions:1600 x 100mm Grinding stone speeds: 1620Rpm Length: 17500mm Width: 5500mm Height: 2200mm Weight: 60000kg Gedpfewrxqxsx An Rebl

Condition: excellent (used), Year of construction: 1994, center height: 100 mm, grinding length: 380 mm, total width: 1,500 mm, total length: 1,300 mm, total height: 1,350 mm, grinding diameter: 200 mm, spindle speed (max.): 1,800 rpm, overall weight: 2,100 kg, pivoting range: 10 °, Centre height: 100mm Grinding Ø: 200mm Grinding length: 380mm Grinding stone dimensions:300 x 50 x 127mm Grinding stone speeds: 1800Rpm Table inclasement: 10° Tailstock: 4Mk Length: 1300mm Width: 1500mm Height: 1350mm Weight: 2100kg Gbodpfxeyu Nqge An Rol Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1994, total length: 2,950 mm, total width: 2,100 mm, feed length X-axis: 650 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, workpiece weight (max.): 400 kg, feed rate X-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, grinding wheel diameter: 350 mm, table length: 600 mm, table width: 400 mm, Digital read out system position slides 5 stones and flanches Coolant and Filtration system CE Mark Levelling pads included  Full set off books  X - Travel: 650mm Y - Travel: 400mm Z - Travel: 400mm Table Length: 600mm Table Width: 400mm Table load: 400 Feed rate X-Axis: 0-5000mm/min. Feed rate Z-Axis: 0-5000mm/min. Grinding stone dimensions:350 x 127 x 50mm Power: 6kW Gbsdpsyvhxmsfx An Rol Speeds: 1400Rpm Cooling system: Yes Feed rate Y-Axis: 0-5000mm/min. Length: 2950mm Width: 2100mm Height: 2000mm Weight: 2550kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2009, grinding length: 1,200 mm, grinding width: 600 mm, total length: 3,500 mm, total width: 1,875 mm, feed length X-axis: 1,320 mm, feed length Y-axis: 730 mm, feed length Z-axis: 480 mm, feed rate X-axis: 1,320 m/min, feed rate Y-axis: 730 m/min, grinding wheel diameter: 350 mm, table length: 1,200 mm, table load: 1,400 kg, table width: 700 mm, Surface grinder LGB France - R12070SM MACH-ID 9600 Make: LGB France Type: R12070SM Year: 2009 X - Travel: 1320mm Y - Travel: 730mm Z - Travel: 480mm Table Length: 1200mm Table Width: 700mm Table load: 1400 Grinding stone dimensions:350 x 50 x 127mm Gbodey Edctopfx An Rol Power: 16kW Speeds: 1500Rpm Length: 3500mm Width: 1875mm Height: 2250mm Weight: 4500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2018, total length: 9,800 mm, total width: 4,000 mm, feed length X-axis: 3,500 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 1,100 mm, feed rate X-axis: 30,000 m/min, feed rate Z-axis: 5,000 m/min, table length: 3,000 mm, table load: 6,000 kg, table width: 1,200 mm, power: 22 kW (29.91 HP), Surface grinder Ziersch - Z1030 MACH-ID 9597 Make: Ziersch Type: Z1030 Control: Mitsubishi Touch Year: 2018 X - Travel: 3500mm Y - Travel: 1100mm Z - Travel: 1100mm Table Length: 3000mm Table Width: 1200mm Table load: 6000 Feed rate X-Axis: 30000mm/min. Feed rate Z-Axis: 5000mm/min. Grinding stone dimensions:500 x 100 x 203mm Power: 22kW Speeds: 3000Rpm Cooling system: yes Feed rate Y-Axis: 3000mm/min. Length: 9800mm Gbedpoy En Dnsfx An Rol Width: 4000mm Height: 4500mm Weight: 27500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2008, feed length X-axis: 5,500 mm, feed length Y-axis: 650 mm, feed length Z-axis: 750 mm, feed rate X-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, table length: 5,500 mm, table width: 750 mm, Profile grinder MAEGERLE - MGC-L 560 Surface, Profile grinding machine 5600 mm Gsdpfjx Swqwsx An Rjbl CNC gear rack grinding machine Automatic grinding head B-Axis Grinding head ca 20 gr swivel ARO - KKS coolant tank 8000 L ( size 4400 x 1900 x 2200) Pendel opperation ( double table) Dresser automatic Table dresser X - Travel: 5500mm Y - Travel: 650mm Z - Travel: 750mm Table Length: 5500mm Table Width: 750mm Feed rate X-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Grinding stone dimensions:600 x 300mm Power: 115kW Speeds: 8000Rpm Cooling system: Yes Feed rate Y-Axis: 20000mm/min. Length: 10700mm Width: 4700mm Height: 3800mm Weight: 42000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1971, condition: excellent (used), CNC Dresser KW with Siemens 840D new in 2002 HeidenHain measuring scales Siemens Servo engines Crankshaft and External grinding Large steady rest package Large stone and flanch package Centre height: 316mm Grinding Ø: 632mm Grinding length: 3000mm Grinding stone dimensions:800 x 305 x 105mm Grinding stone speeds: 1000Rpm Table inclasement: 9,1° Coolant system: Yes Godpfxem Twz Aj An Rebl Filtration: Yes CNC Dresser KW with Siemens 840D new in 2002 HeidenHain measuring scales Siemens Servo engines Crankshaft and External grinding Large steady rest package Large stone and flanch package Length: 10100mm Width: 2600mm Height: 2300mm Weight: 15000kg

Condition: good (used), total width: 3,500 mm, total length: 19,000 mm, total height: 2,100 mm, workpiece weight (max.): 6,000 kg, grinding diameter: 850 mm, grinding length: 6,000 mm, center height: 425 mm, Cylindrical grinder Schmaltz - RM 82/6000 MACH-ID 9492 Make: Schmaltz Type: RM 82/6000 Centre height: 425mm Grinding Ø: 850mm Grinding length: 6000mm Grinding stone dimensions:1100 x 80 x 560mm Grinding stone speeds: 700Rpm Gbedjy Dr Eaopfx An Rsl Table inclasement: -5 to +5° Tailstock: 160 x 100Mk Length: 19000mm Width: 3500mm Height: 2100mm Weight: 31000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2007, grinding length: 1,200 mm, grinding width: 200 mm, total height: 2,750 mm, total length: 5,200 mm, total width: 2,700 mm, feed length X-axis: 2,200 mm, feed length Y-axis: 1,240 mm, feed length Z-axis: 630 mm, table length: 2,000 mm, table load: 3,000 kg, table width: 1,200 mm, overall weight: 9,800 kg, power: 20 kW (27.19 HP), grinding wheel speed: 1,200 rpm, Surface grinder Gbsdpfxsy Ec Ihj An Rol LGB France - R-12020 MACH-ID 9599 Make: LGB France Type: R-12020 Year: 2007 X - Travel: 2200mm Y - Travel: 1240mm Z - Travel: 630mm Table Length: 2000mm Table Width: 1200mm Table load: 3000 Grinding stone dimensions:450 x 80 x 127mm Power: 20kW Speeds: 1200Rpm Length: 5200mm Width: 2700mm Height: 2750mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), CATALOG NUMBER 7854 Technical data: - belt length: 2515x152 mm - belt width: 150 mm - oscillation - vertical oscillation movement - sanding length: 790 mm - table size: 840x300 mm - worktable for contoured elements: 300x250 mm - worktable adjustment: 80 mm - motor: 2.2 kW - sanding unit adjustable angle: 90-45 degrees - sanding head adjustment: 0-45 degrees - extraction port diameter: 100 mm - dimensions (length/width/height): 1450/600/1230 mm - weight: 138 kg ADVANTAGES Gbsdpoy Rr T Rjfx An Rol – with oscillation – with shoe – suitable for contour and straight sanding – unit can operate vertically and horizontally – unpainted – used sander, very good condition Net price: 3,900 PLN Net price: 930 EUR (depending on the 4.2 EUR rate) (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOG NUMBER 7324 Technical Specifications: - Max workpiece width: 200 mm - Max workpiece height: 190 mm 2 sanding units: - Top: steel roller + pad + steel roller - Bottom: steel roller + pad + steel roller Top: - 2 pressure rollers, rubber, feed - sanding unit - idler roller Gedsy Rrd Nepfx An Rebl - 2 pressure rollers, rubber, feed Bottom: - sanding unit - side guiding rail - electronically adjustable sanding height 0.37 kW - 6 feed speeds + forward/reverse: 2.25; 4.5; 9; 12.5; 18; 25 m/min - feed motor 0.6 kW - main motors 2 x 4 kW - extraction port diameters: 80 mm, 90 mm - overall dimensions (L/W/H): 1830 x 860 x 1760 mm - weight: 630 kg – unpainted – used sander, in very good condition Net price: 11,500 PLN Net price: 2,730 EUR (based on rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: used, Year of construction: 1970, total height: 1,700 mm, total length: 1,400 mm, total width: 900 mm, Colour: Grey Empty weight: 500 kg - Year: 1970 - Documentation available: No - CE certificate present: No - Serial number: CH - Motor power: 1.4kW - Transport dimensions: 1400mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Godpoyxqzcefx An Rjbl Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2004, total height: 1,600 mm, total length: 1,250 mm, total width: 1,400 mm, Colour: Grey Empty weight: 900 kg Price: On request - Details: - └ Description: Bad bearings - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: 102850 - Motor power: 1.0kW - Transport dimensions: 1250mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Gbjdpfx Ajyr Rnzen Rol Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2006, total height: 1,600 mm, total length: 1,300 mm, total width: 1,500 mm, Colour: Grey Empty weight: 900 kg Price: On request - Year: 2006 - Documentation available: No - CE certificate present: No - Serial number: 108088 - Motor power: 1.0kW - Transport dimensions: 1300mm x 1500mm x 1600mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gedsytbc Sspfx An Rebl Lukas van Rossum

Condition: used, total height: 2,650 mm, total length: 4,700 mm, total width: 2,100 mm, Colour: Grey Empty weight: 5.500 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - X-axis travel [mm]: 1500 - Y-axis travel [mm]: 800 - Z-axis travel [mm]: 700 - Table width [mm]: 1200 - Table depth [mm]: 400 - Magnet width [mm]: 1200 - Magnet depth [mm]: 300 - Options: Digital readout - └ Type of digital readout: Heidenhain - Transport dimensions: 4700mm x 2100mm x 2650mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Gbsdpfxox Dkggs An Rel VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 1,620 mm, total length: 1,750 mm, total width: 1,400 mm, Colour: Grey Empty weight: 2.500 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of axes [pcs]: 3 - X-axis travel [mm]: 500 - Y-axis travel [mm]: 230 - Z-axis travel [mm]: 330 Gbjdpsyh Amlsfx An Rsl - Table width [mm]: 720 - Table depth [mm]: 200 - Magnet width [mm]: 460 - Magnet depth [mm]: 180 - Options: External cooling - Transport dimensions: 1750mm x 1400mm x 1620mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum