Surface grinders with horizontal spindle

Elb SWE 6 VA II

Condition: used, Year of construction: 2013, Technical details: x-travel: 760 mm y-travel: 460 mm z-travel: 460 mm control: Heidenhain TNC 620 switched on hours: 20246 h spindle hours: 7724 h number of spindle speeds: 12.000 U/min. max. torque on the spindle: 75 - 95 Nm spindle taper MT: SK40 tool changer with: 24 Plätze table-size: 900 x 410 mm max. table load: 350 kg feed range: k.A. rapid traverse:: 36 m/min interface: RS232 control voltage: 24 DC V air-pressure connection: 6 / 8 bar total power requirement: 20 kVA Weight approx.: ca. 6,0 t dimension coolant device: 1,7 x 0,7 x 1,35 m Fodpfx Aajvhbpde Esfw dimension machine xH: 1,9 x 2,3 x 2,45 m TNC620 (contouring control with up to 5 controlled axes, particularly suitable for universal milling), can be integrated into the network Safety doors with impact-resistant plastic window panes Chip conveyor Hydraulic unit Coolant preparation system Rittal cooling system on the control cabinet Work area Interior lighting *

Condition: used, Year of construction: 2004, Technical details: Fsdok Hdu Djpfx Aa Esfw x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm number of spindle speeds: 63 - 3.150 1/min feed stepless: 12-3000 / 6-1500 (Z) mm/min quill stroke: 100 mm milling-head swivable +/-: 90° spindle taper ISO: SK 40 surface area: 630 x 400 mm total power requirement: 8 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2 x 1,9 x 1,95 m universal milling machine with point to point control, mechanical handwheels, swivel - rotary table (mech.) +-45°, hydr. tool clamping, half cabin, coolant device, manuals (German language) *

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: C3300, grinding length: 4,500 mm, grinding width: 300 mm, table length: 4,500 mm, table width: 300 mm, space requirement height: 2,500 mm, space requirement length: 13,700 mm, space requirement width: 2,500 mm, Reform AR45 T9 ZU C3300/86 Year of manufacture: 1986 Sanding length: 4500mm Sanding width: 300mm Workpiece height: 250mm Swivel range table or sanding arm: +-90 degrees Segment head diameter: 560mm Spindle diameter in front bearing: 120mm Swivel range: 2° Max. Torque: 719,5Nm Motor: B280, 55kW Grinding spindle speed range: 0-730 rpm Control system: BBC Baumüller drives Marposs measuring system Hydraul. Clamping Sanding mist extraction system: Hydrocyclone cleaning system Additional sanding unit ZU Ffjdpfjtqtn Djx Aa Esw Feed rate: 2000-35000mm/min Space requirement approx. 13.7x2.5x2.5m

Condition: like new (used), Specifications Manufacturer GLEASON Model 104 Condition Used Serial Number 631406 Stock Number DCN1749 Ffedpfextpk Aex Aa Ejw Max working diameter 432 mm Module max 8,5 Description Equipped with change gears books

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, GF AgieCharmilles CUT 300 Year of manufacture: 2013 Charmilles Millenium CNC Control Travel (X / Y / Z): 550 x 350 x 400 mm Travel (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes automatically lowering work tank (drop-door) Maximum workpiece dimensions: 1200 x 700 x 400 mm Fsdpfx Aaew D Accs Eofw Maximum workpiece weight: 1500 kg Cutting speed: 340 mm²/min Best surface finish: Ra 0.10 µm Available wire diameters: 0.15 to 0.33 mm Dimensions of complete system: 2600 x 2600 x 2340 mm Total weight of system: 3300 kg The machine is cleaned, completely overhauled and tested for all functions after order confirmation. You receive a 6-month warranty on the machine. Commissioning service is available upon request.

Condition: used, MOSTANA STANKO 1M65-5 HEAVY DUTY CENTRE LATHE MAKE MOSTANA STANKO, MADE IN USSR Fodpfxsx Dmi Dj Aa Eefw MODEL 1M65-5 YEAR MID 80s SWING OVER BED 1000.0 mm SWING OVER SADDLE 650.0 mm CHUCK SIZE 1000.0 mm SPINDLE BORE 135.0 mm SPINDLE SPEEDS 5- 500 RPM SPINDLE POWER 22 Kw PLUS POWER FEED TO THE SADDLE METRIS AND ENGLISH SCREW CUTTING 1000.0MM 4 JAW CHUCK 2 AXIS DIGITAL READOUT CLEAN BED WORKED ON COMPOSITE, NO METAL

Condition: used, Year of construction: 2003, Control BWO tip circle diameter max. 700 mm root circle diameter min. 50 mm height of profile max. 35 mm number of spindle speeds 0 - 5400 min-1 table load capacity max. 500 kg Overall size 370x220x300 cm Total weight, approx. 15000 kg Ffodpfx Aajxt Ur Se Eew Number of working hours 94082 h Equipment: BWO control system All axes CNC controlled Oil mist extraction Coolant cleaning system with cooling unit Dittel balancing unit Accessories: Grinding wheels Ø400mm incl. Grinding wheel flanges 1 diamond dressing roller, manufacturer Dr. Kaiser, Ø160mm Counterholder tip Control cabinet: Width 70 cm x length 280 cm x height 220 cm Machine: Width 220 cm x length 370 cm x height 300 cm Coolant system: Width 170 cm x length 240 cm x height 250 cm

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm Fedpfx Ajxq Hhyea Eofw from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Year of construction: 1993, condition: good (used), machine/vehicle number: 03.2370, Arthur Klink - internal broaching machine (WAG 748) machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 10 x 1000 Ffedscc D Ddopfx Aa Eow built in: 1993 stroke: 1000mm pulling force: 10.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, magnetic chip conveyer remark: machine under power in stock the machine has an automatic workpiece loading system for 2 workpieces, ideal useable for high production Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.

Condition: used, Year of construction: 2007, control Siemens Sinumerik 840 D weight 57.000 kg voltage 400 V Gleason PFAUTER CNC gear hobbing machine P 2400/2800 for gear cutting of cylindrical and worm gears as well as all other regularly occurring rollable profiles and shapes on the cylindrical workpiece circumference. Large gear hobbing machines from Gleason offer maximum productivity for roughing and finishing cylindrical gears for many industries: wind turbines, industrial gearboxes, mining and shipbuilding, gear machining and many more. The power range of the drive takes future tool developments into account. Of course, the gear hobbing head drive is also backlash-free. These machines are particularly well suited for use with state-of-the-art, cutting materials, regardless of whether dry or wet machining is preferred. The machine can be used for dry or wet machining and is also equipped with the appropriate chip conveyor for both machining methods. The machine is equipped with an internal profile milling head as a motorised milling head. --> Working range and technical data Nominal workpiece diameter: 2.400 mm --> Largest millable diameter approx.: 2.800 mm --> Smallest/largest distance between cutter and workpiece axis: 100/1.200 mm --> Largest axial slide travel (special design): 1.300 mm --> Largest clampable cutter (internal milling head): --> Diameter max: 440 mm --> Max. cutter width: 90 mm --> Swivel range of the internal profile milling head/vertical axis: +/- 15° Fodowzyp Iopfx Aa Esfw --> Milling mandrel taper: HSK-B160 --> Maximum milling cutter travel: 300 mm --> Table diameter: 2.500 mm --> Part wheel diameter: 2.200 mm --> Table bore --> Diameter: 800 mm --> Depth: 875 mm --> Maximum table load approx.: 40.000 kg --> Max. feed and rapid traverse speeds: --> axial (Z-axis): 4.000 mm/min --> radial (X-axis): 3.000 mm/min --> tangential (Y-axis): 3.000 mm/min --> Milling cutter cooling lubrication device/electric centrifugal pump: approx. 150 l/min --> Increased drop height of magnetic chip conveyor: 1,600 mm --> Increased main stand: 1,300 mm axial slide travel --> Internal profile milling head as motor milling head instead of standard motor milling head --> Max. millable profile depth in steel with approx. 600 N/mm² strength: approx. 65 mm --> Infinitely variable milling speed: 50 - 150 min?¹ --> Max. milling cutter diameter: 440 mm --> Min. milling cutter base circle diameter: 310 mm --> Max. milling cutter width: 90 mm --> Min. internal diameter at 0° bevel angle: 800 mm+) --> Max. workpiece height at 0° bevel angle: 600 mm --> Max. workpiece ring thickness (including clamping device): 500 mm