Used Welding Smoke Filter for sale (12,144)

Year of construction: 2024, condition: new, functionality: fully functional, Professional mobile filter device for extracting welding fumes with a powerful extraction arm Suitable for welding processes MMA MIG MAG TIG plasma cutting Extraction capacity max 2500 m3/h Extraction arm length 3m Motor power 1.1 kW Connection voltage 230 V / 50 Hz Sound pressure level approx. 73 dB(A) Filter area approx. 14 m2 Powder-coated sheet steel housing with wheels and handles. Digital control panel with alarm log, operating hour counter and filter monitoring. The electronic circuit board is separate and protected from the air flow. Hodpfevnzwzjx Ahvsi High-performance fan located downstream of the filter in a separate soundproof compartment. Spark protection filter built into the device as original equipment. A set of activated carbon filters (10 kg) can be used on request, which are particularly required for SOV/VOC, stainless steel and galvanized steel.

Condition: ready for operation (used), Specifications: Supply voltage | V | 230 Frequency | Hz | 50 Run Hours: 2690 hours Type of current | Ph | 1. Engine power | kW | 2.4 Air flow volume max. | m³/h | 640 Negative pressure max. | Pa | 15000 Protection class | | IP54 ISO class | | F Extraction performance | % | >99 Width | mm | 365 Hedpfx Aoxvpumshvei Depth | mm | 768 Height | mm | 801 Weight | kg | 70 Sound pressure level | dB(A) | 70 Allowed ambient temperature | °C | +5 to +35 (during operations) | | -10 to +40 (during transport and storage) Max. temperature of polluted air at the capture point | °C | +50 Allowed max. humidity | % | 70 Good working condition. Please check out our other listings as well.

Condition: new, volume capacity 2500 m3/h 0 3000 mm Hsdpfx Ahofrzt Uevoi total power requirement 1,1 kW weight of the machine ca. 0,08 t dimensions of the machine ca. 0,58x0,58x0,58 m

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Hodpfoxf Up Isx Ahvji

Condition: used, filter area: 252 m², suction capacity: 12,000 m³/h, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Filter cleaned with compressed air pulses during operation, which ensures high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Parameters: Efficiency - 12000 m3/h Filtration area 252 m2 Cartridge filter inserts - 12 pcs. 15 kW engine Hsdpfx Aevzy Irshvei inlet diameter - 500 mm Dimensions: height - 3.65 m width - 2.10 m depth - 2.10 m fan: 1.75 m x 1.50 m height 1.45 m stock no.: 0948

Condition: good (used), Year of construction: 2018, AMBITOWER 10 series filter ventilation (filter tower) is used for welding fume extraction in production halls. Efficient compact hall ventilation systems are used wherever selective smoke detection alone is not sufficient or direct detection during welding work on large or complex metal parts seems unfeasible. Filter towers not only provide effective separation of contaminants, but also contribute to significant savings in hall heating costs in winter. Depending on the application, energy costs can be reduced by up to 70%. This is ensured, among other things, by highly efficient M-class fixed filter cartridges, which guarantee 99% separation efficiency, so that warm, purified air can return to the hall and there is no need to bring in outside air. Areas of application for Keller Ambitower 10 stationary welding fume filtration systems : Welding fume extraction in production halls (hall ventilation system) Ideal for all work areas where local extraction is not practical or not possible, metal industry Mechanical engineering Automotive industry Vehicle construction aircraft construction, etc. Parameters : Engine power - 7.5 Kw. Built-in inverter Capacity - 10000 m3/h Filtration area - 90 m2 Antistatic filter cartridges Noise level - ≤ 75 Year of manufacture: 2018 Technical documentation included dimensions: Hodsi Atb Topfx Ahvoi width - 2.35m x 1.35m height - 3.50 m Weight - 1800 kg

Condition: used, Extraction capacity of the unit: 182 m³/h with 5 m air hose 45 Ø: 159 m³/h Filter surface: 9,6 m² electr. connection: alternating current 220 V weight: 20 kg Hodpfxsb Nv S Es Ahvji Space requirement: 850 x 330 x 450 mm

Condition: used, machine/vehicle number: 1980 100 175, Max. volume flow: 220 m³/h Pressure max. 22000 Pa electr. connection: 230 V weight: 16,5 kg Hedeb Nv S Sepfx Ahvji Space requirement: 720 x 320 x 410 mm

Condition: ready for operation (used), Suction nozzle Ø: 55 mm 1 suction speed Hjdpfsd Hbv Dex Ahvei electr. connection: 230 V space requirement: 700 x 280 x 370 mm

Condition: ready for operation (used), Year of construction: 1991, Flow rate: 1500 m³/h Hodpswx H Dyofx Ahvsi Drive motor: 380 V, 2850 rpm, 1.5 kW Extraction pipe diameter: 140 mm 3-meter sections with 3 joints, height-adjustable Intake funnel with throttle valve Space required: 1150 x 600 x approx. 2300 mm

Condition: not inspected (used), functionality: unexamined, total height: 860 mm, total length: 2,000 mm, total width: 1,000 mm, overall weight: 1,500 kg, hole diameter: 16 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates you to timely collection, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Number of holes: 800 Hole diameter: 16 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,000 x 860 mm Weight: 1,500 kg Hjdjym Rytopfx Ahvoi EQUIPMENT Lot clamping devices External reference: CES - Lot 91

Condition: new, Year of construction: 2026, Equipment: documentation/manual, Laser welding machine with 3 kW laser power, laser components from Siemens - welding machine with genuine CE and therefore also German manual, risk analysis and everything that is required to be able to operate a laser welding system in Germany. Wire feed case, also with genuine CE, is also included in the delivery. An introduction can take place here in the company. Hsdpfxon Sl D Re Ahvei

Year of construction: 2021, condition: excellent (used), Liqui Filter Chip Processing System Chip processing system for the recovery of coolants and oils, and the drying of chips Steel chips are shredded and centrifuged. The separated coolant is processed and returned to the system. The dried chips are collected in a chip cart provided by the customer. Sedimented sludge is collected in a container and discharged into a sludge tank provided by the customer. Advantages of Continuous Horizontal Centrifuges - Low Investment Costs Compared to other centrifuges with the same capacity, the investment costs of this centrifuge are significantly lower. Installation is simple and quick. Hedpfx Ahoykt Dpsvoi - Low Operating and Maintenance Costs The centrifuge is suitable for integration into a continuous chip processing system and then operates without manual operation. Maintenance costs—which are relatively high for other centrifuges—are lower for this horizontal centrifuge because every part is easily accessible. The centrifuge does not need to be lifted or moved for maintenance. All comb grids and sealing components are at an ideal working height. Technical Data Type: HSZ 650 Motor power: 5.5 kW, 3 x 400 V Max. rated output: 2.3 m³/h Continuous capacity Steel chips: 300 - 650 kg/h Aluminum chips: 100 - 300 kg/h Cast iron chips: 200 - 400 kg/h Residual moisture: (by weight) 1 - 4% Application: Crushing and centrifuging steel chips Mains connection: 3 x 400 V/N/PE 50 Hz Control voltage: 24 V DC Total connected load: 25 kW, 50 A Fuse: 63 A Dimensions (L x W x H): 1280 x 930 x 955 mm Net weight with motor: 410 kg Year of manufacture 2021 Components MD-3 Lifting and Tilting Station (Dieterle) 7000 SB1000 Chip Breaker (Liqui) 12000 SF300 Hinge Belt Conveyor (Liqui) 8000 HSZ650 Centrifuge (Liqui) 12000 KF550 Scraper Conveyor (Liqui) 5000 Dismantling and removal by buyer Dismantling by our assembly team is also possible (from €5000 net) Location: 21079 Hamburg Financing through our bank is also available. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), Table size:1500x1500mm Hodpfjfvqmxsx Ahvsi Capacity : 6t Dimension: 1600x2500x2000mm Hydraulic

Condition: used, Year of construction: 2011, functionality: fully functional, Donaldson DCE Torit DMC-MMC filter oil mist separator, oil separator, oil extractor, air filter Year of manufacture: 2011 Connection: 400V, 1.5KW Hjdpfx Asxri T Uohvsi Fully functional condition, see pictures Forklift available for loading Collection only by appointment in 75053 Gondelsheim Shipping by freight forwarding possible, please inquire with postal code

Condition: excellent (used), load capacity: 3,000 kg, table load: 3,000 kg, Equipment: foot remote control, Belgium Welding 3 To 3,000 kg load capacity welding positioner, complete set Horizontal load capacity 3,000 kg, tilted load capacity 3,000 kg Stepless tilt and speed adjustment Hedpfx Ahexbhrhevei Very robust construction Speed steplessly adjustable from 0.05 to 0.7 rpm, digital display Turntable diameter: 1,400 mm Height horizontal: 1,450 mm, tilted to center: 1,200 mm Length: 2.0 m x Width: 2.0 m Hand-held remote control with digital display and foot remote control

Condition: like new (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: EQWDCOM, type of input current: AC, ZDI Quality Welding Consumables, Wires, Rods TIG Welding, Robotic Welding, Qualified Manufacturer, Quality Guaranteed. Wires, Rods, Stainless Steel, Nickel and Nickel Based Alloys, Strip Cladding. ERNiCrMo-3, ERNiCrMo-4, etc. Hsdpfxjyaw Hae Ahvoi

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, Equipment: type plate available, manufacturer: PECO N30 rated power: 40/80 kVa KB 1970 production can weld in 2 directions rather water cooled, air operated Hsdsxlr Tdepfx Ahvji Kb 32 A can weld 500mm in length voltage: 380v 50 Hz

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, bag dust filter Bag dust filter tower 4kw 9 bag extractor 3200m3/h 9 bag dust filter extractor in excellent condition for sale. radial fan: Filli ferrari 4kw 9 pieces of EMTEX textile dust filter bags, 250mm x 1650mm/pc Outlet diameter: 600mm Inlet diameter: 260mm built-in vibratory shaker. 0.18kw. Hsdpfx Aheydp Nuovsi structure: galvanized steel casing, steel frame. height: 3800mm width: 1150mm

Condition: excellent (used), Bandskimmer Brand Polo filter Bremen Immersion depth maximum 600 mm Band width 100 mm 220 volt Operating voltage 24 volt Weight 11,5 kg Hsdpedx E Hcofx Ahvsi Shipping dimensions: L. 420 x B. 260 x H. 550 mm

Condition: used, This is an LSQ5X welding power source from SKS Welding Systems, together with a Weld Process Controller MULTIPROCESS - Q80 and an SKS Frontpull 8 (23°) Hjdpfx Aheuxbx Dovji

Condition: ready for operation (used), Year of construction: 1989, machine/vehicle number: D205228, Heinrichsglueck H-36 welding positioner Fully functional. Square table 1050x1050mm. Hjdpfouiac Hox Ahvsi The set includes a remote control with adjustment of table rotation speed and inclination (135 degrees). New power and control cable.

Condition: good (used), DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter Hsdpfx Ajwbzxqehvei -Manufacturer: Mann Filter, Air Oil Separator Filter Type 49 002 -Inside/outside: Ø 124/169 mm -Number: 5x air filters available -Price: per piece -Dimensions: Ø 190 x 315 mm -Weight: 2.6 kg/piece

Year of construction: 2006, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch Hodpfoxy Hqtsx Ahvsi -Manufacturer: Messer Cutting & Welding, machine cutting torch, flame cutting machine -Type: Quicky -Cutting speed: adjustable -Voltage: 230 V 40 W -Dimensions: 520/280/H330 mm -Weight: 7.8 kg

Condition: used, Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Mann air filter housing with: filter -Inlet/outlet: Ø 80/70 mm -Part Number: 43 905 63 8981 Hsdpfxed Sxg Us Ahvsi -Dimension: Ø 260/400 mm -Weight: 11.5 kg