Welding fume filter

Kemper 91710

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction). Csdpfx Astp Dhpeilerd  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: new, empty load weight: 123 kg, maximum load weight: 627 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,006 mm, loading space width: 1,256 mm, loading space height: 777 mm, loading space volume: 1.4 m³, tire size: 13, wheelbase: 155 mm, color: grey, Year of construction: 2024, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK, AND THE NETHERLANDS. UT004501 The UNITRAILER Garden Trailer 201 TIPPING car trailer, with a GVWR of up to 750 kg, features a folding rear and front side panel, allowing for loading and unloading in just a few minutes! Thanks to the use of a tilting drawbar, it can be positioned vertically on the rear side panel at any point. All formalities related to the purchase will be taken care of for you. When ordering a car trailer, please specify the GVWR of the vehicle that will be used to tow the trailer. Available optional equipment: * additional side panels * high drop-side with tarpaulin, 80 cm * brackets for attaching tie-down straps Crsdpeir H Rwefx Ailjd * anti-theft device * spare wheel Technical data of the Garden Trailer 201 TIPPING car trailer: CHASSIS - steering axle from Knott or AL-KO Tire size: 155/70 R13 Tilting V-drawbar, which can be folded under the trailer's base plate at any time BODY - load-bearing frame made of hot-dip galvanized sheet steel Curved profiles are used with screws Loading area: non-slip and water-resistant screen-printed base plate, 9 mm thick SIDE PANELS - all side panels are made of galvanized steel. Total height of the side panels: 70 cm Shipping costs will be charged separately.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, For sale is a measuring system from Keyence, type XM- C1000 The measuring system is something special, as the points to be measured are scanned by hand Very user-friendly and intuitive system. Compact and easy to maintain Control unit and PC XM-1600 are included in the offer Also Measuring probe, exchangeable probes, alignment station, various clamping devices Clamping vice Mouse Touch probe Operating instructions On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale Credjrq Ebiepfx Ailod PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 4012M-4212, measuring range X-axis: 900 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, workpiece weight (max.): 1,200 kg, Equipment: type plate available, Technical Data: Machine type: Mitutoyo STRATO 9106 FAL-A910 Year of manufacture: 2001 Codjqz T H Aepfx Ailerd Measuring range: 900 x 1000 x 600 mm Software: Mitutoyo Software v2.4.R11 Accessories: Probe head mount: Renishaw SP80 Probe head: Renishaw SP80 Additional accessories: calibration ball (ceramic), various probe styli and extensions, Renishaw change rack, fastening kit with 4 x SCP80 and probe holder Modifications and errors in the technical data and information as well as prior sale are subject to change!

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Crsdpfsuz If Njx Ailjd Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Year of construction: 2022, condition: new, machine/vehicle number: RPM500_OSZ2, Robot-controlled polishing machine RPM500_OSZ2 with oscillation (50 mm) and feed (100 mm) Polishing disc diameter – 1000 mm Crodpfed Dt D Ijx Ailod Drive power – 4 kW Dust extraction nozzle diameter – 100 mm Two units are available.

Condition: new, messurements (LxWxH): 3.600 x 1.120 x 1020weight approx.: 2.400total power requirements: 4prebending: 5sheet thickness: 6sheet length: 2030 Crsdpfx Aied Ab Hasljd

Condition: good (used), Year of construction: 2001, Machine is in good condition. Parts shown by hand not come. Cutting tools not come. Cjdpfx Aijrpk Rmjljrd

Condition: new, lifting capacity:30000 kg empty weight:429 kg dimensions:2450 mm height:535 mm width:265 mm Credped R Hvyjfx Ailod length maximal:4250 mm extendable to ( + 800 JP):6200 mm Extendable to:8500 mm Guarantee:12 Monate Shackles:4 + 4 Stück extensions (each 1 Set, 4 pcs):800 JP Webbing sling attachement:800 LKP 4 point lifting bracket :800 LK Lifting bracket, wide:800 NKL Equalizer plates:800 TL Unwinder:800 AR 7 Rack:800 ST 2

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, •Revolver head overhauled in 2021 •High-pressure/high-flow KSS pump installed in 2021 •Draw tube renewed and spindle housing re-bearinged and lapped in 2022 •Prepared for automatic loading of parts using a robotic cell Control: CNC control including Siemens 840 D color screen TECHNICAL DATA Turning diameter max. 550 mm Turning diameter max. 480 mm Turning length 1000 mm Spindle bore 78 mm Drive power (50%) 53 kW Speed range (1-stage) 30 – 4000 rpm Drum turret Number of positions 12, of which 6 are driven Cylinder shank 40 mm Speed range (2-stage) 20 – 2500 rpm Tailstock (hydraulic quill adjustment) EQUIPMENT/ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C-axis  Tailstock controlled via program including various centering tips  Drum turret, 12 positions  Drive unit for turret  Chip conveyor  Coolant system with increased pump capacity, approx. 4 bar  Interface for automation  Various accessories  1 Heimbuch collet chuck SK 80, without collets  1 3-jaw chuck Schunk Rota NCF 315  1 3-jaw chuck Schunk Rota NCF 250  1 2-jaw chuck Schunk Rota NCF 250  1 Impact head WTO Credpfxsvr Tkze Ailjd  2 driven tools CAPTO-axial tool  2 driven tools CAPTO-axial radial tool  3 driven tools CAPTO-radial tool  7 fixed tool holders  Mounting elements  Documentation