Used Welding Positioner for sale (7,170)

Condition: used, Welding turntable ESS type DT 50 No. 86 / 1125 Year of construction 1986 max. load 50 kg Face plate diameter 300 mm Face plate speed 0.19 to 5.7 rpm Control voltage 24 Volt Motor power 100 watts Mains connection 220 Volt, 50 Hz. - Faceplate can be swiveled continuously through 180° in position Ijdpfjrwq Urex Ah Ejtl - Speed control via rotary potentiometer - Clockwise/anticlockwise rotation - Foot switch - 2-stroke and 4-stroke operation - Sliding contact for ground up to 200 Amp. - New ESS PS3 control system from 2009 Space requirement L x W x H 600 x 500 x 350 mm Weight 45 kg very good condition

Condition: used, Welding turntable – welding rotating device with enclosure Iedodzp U Ispfx Ah Eotl Circular welding device Load capacity approx. 50 kg Turntable diameter 300 mm Turntable speed 1.0-15 rpm Mains connection 230 volts, 50 Hz - Plan spiral turntable with internally stepped jaws - Infinitely variable speed control via potentiometer - Drive via geared motor, rotation direction: left - Start via electrical switch - Welding current transfer via sliding contact - Extraction port Ø 160 mm - Interior lighting Door opening W x H 715 x 1060 mm Internal dimensions W x D x H 780 x 780 x 1100 mm Space required W x D x H 900 x 900 x 2300 mm Weight 190 kg

Condition: new, load capacity: 100 kg, rotary table diameter: 400 mm, Capacity: 100kg Max. height center of gravity: 150mm Max. eccentricity. center of gravity: 100mm Table diameter: 400mm Motor power: 0,2kw Table tilt: Manual, by handwheel Rotation speed: 0.4 - 4.0 rpm Manual operation: By foot pedal (right and left rotation) Automatic operation: By means of selector on control panel Angle of inclination (degrees): 0 - 90 Iedpfjuf Niujx Ah Eetl Inverter: Danfoss Electrical components: Schneider

Condition: new, load capacity: 2,000 kg, rotary table diameter: 1,300 mm, pivoting range: 120 °, Capacity: 2,000 kg Max. height center of gravity: 250 mm Max. center of gravity eccentricity: 200 mm Table diameter: 1,300 mm Motor power: 1,1 + 1,5kw Table tilt (Motorized): Tilt speed 0.67 rpm Itedpfx Asuf Nm Hsh Ejl Rotation speed: 0.12 - 1.2 rpm Manual operation: By foot pedal (right and left rotation) Automatic operation: By means of selector on control panel Angle of inclination (degrees): 0-120 Drive: Danfoss Electrical components: Schneider

Condition: new, load capacity: 300 kg, rotary table diameter: 600 mm, Capacity: 300 kg Itodjuf Nk Espfx Ah Eol Max. height center of gravity: 200mm Max. eccentricity center gravity: 150mm Table diameter: 600 mm Motor power: 0,37kw Table tilting: Manual, by handwheel Rotation speed: 0,1 - 1,0 rpm Manual operation: By foot pedal (right and left hand rotation) Automatic operation: By means of selector on control panel Angle of inclination (degrees): 0-90 Drive: Danfoss Electrical components: Schneider

Condition: new, load capacity: 5,000 kg, rotary table diameter: 1,500 mm, pivoting range: 120 °, Capacity: 5,000 kg Max. height center of gravity: 300 mm Itsdpfx Aheuf Nu Rj Ejl Max. center of gravity eccentricity: 200 mm Table diameter: 1.500 mm Motor power: 2,2 + 3kw Table tilt (Motorized): Tilting speed 0.14 rpm Rotation speed: 0.05 - 0.5 rpm Manual operation: By foot pedal (right and left rotation) Automatic operation: By means of selector on control panel Angle of inclination (degrees): 0-120 Drive: Danfoss Electrical components: Schneider

Year of construction: 1992, condition: good (used), Geuma welding roller set, welding positioner set type GRS-SPE in neat good working condition consisting of: 1 x driven 3 x guide wheels Specifications: - 7 kW Itsdjlzcibspfx Ah Ejl - max capacity 31 tons - diameter idlers 550mm - width 2 wheels side by side 950mm - center of wheels from under frame 340mm - maximum adjustable width 2500mm

Year of construction: 1990, condition: used, machine/vehicle number: xxxx; Lg-Nr. 17250, Technical specifications: - Load capacity approx. 200 kg - Outreach 800 mm - Working height in horizontal position approx. 1000 mm - Boom arm can be rotated to the left and right by motor - Boom arm can be tilted manually - Grinding wheel can be rotated to the left and right by motor - Grinding wheel speed can be adjusted continuously - Grinding wheel diameter 300 mm - Swiveling control panel with ESAB control unit, - Type 6 PTF, year of manufacture 1997 - Space required approx. W 1100 x H 1300 x D 1600 mm Iededd Ilxjpfx Ah Eetl - Weight approx. 300 kg

Condition: new, Year of construction: 2026, CORMAK PS-180 welding positioner is a compact, precise, and reliable welding turntable designed for assembly and welding operations in production workshops, metalworking facilities, and repair departments. Thanks to precise speed adjustment, a robust construction, and a wide range of working table inclination, this positioner significantly improves operator efficiency and comfort. It provides a safe and controlled solution for welding cylindrical components and parts with complex geometries. Main advantages of the PS-180 welding positioner High-precision welding turntable – enables accurate positioning of workpieces within a range of 0–90°. Itodpfx Ahorigkpo Ejl Adjustable rotation speed from 1 to 8 rpm – allows the working speed to be adapted to the type of weld and welding technology. Foot control pedal included – provides dynamic control over table rotation and movement direction in real time. Ø200 mm working table – equipped with mounting grooves for easy installation of chucks, clamps, and workpieces. Universal grounding slot – enables continuous connection of the welding ground without the need for reconnecting during rotation. Compact dimensions and low weight – easy integration into existing workstations and quick repositioning when required. Design and technology The CORMAK PS-180 welding positioner was designed with ergonomics and durability in mind. The robust housing made of high-strength steel ensures resistance to demanding operating conditions, while the working table design allows precise mounting of components with various shapes. The manual tilting system with a range of 0–90° allows the workpiece to be positioned in the optimal welding position. The rotation system is powered by a 15 W motor and provides smooth adjustment of rotation speed, significantly increasing operator flexibility and process control. Precision and work efficiency CORMAK welding positioners enable achieving the ideal welding position, resulting in higher weld quality and fewer technological errors. Thanks to automatic rotation of components and stable workpiece mounting, the operator can focus on welding technique, achieving consistent and aesthetically pleasing joints. This solution significantly improves productivity and reduces operator fatigue by eliminating the need for manual handling of components during welding operations. Applications The PS-180 welding turntable is particularly suitable for: welding cylindrical components such as tanks, pipes, sleeves, and flanges, precise assembly of components along the axis of rotation, orbital and TIG welding processes where precise speed control is essential, production processes requiring partial automation, handling lightweight components in limited working spaces. Standard equipment Ø200 mm working table with mounting grooves Foot control pedal Grounding slot for welding cable connection Manual tilting mechanism 0–90° Built-in inverter for rotation speed control Technical specifications Parameter Value Horizontal load capacity 10 kg Vertical load capacity 5 kg Working table size Ø200 mm Tilting angle 0° ~ +90° Rotation speed 1–8 rpm Rotation motor power 15 W Tilting system Manual Voltage 220 V-1PH-50HZ Dimensions 260 × 320 × 280 mm Weight 10 kg The three-jaw chuck is not included in the set.

Condition: new, Year of construction: 2026, CORMAK PS-650 welding positioner is a professional device designed for precise rotation and positioning of welded components in various industrial processes. Thanks to its high load capacity, robust construction, and smooth adjustment of operating parameters, this positioner is an indispensable support tool in facilities involved in welding, assembly, and painting of metal structures. Main advantages of the machine Load capacity of up to 650 kg in horizontal position and 300 kg in vertical position allows handling heavy structural components. Smooth rotation speed adjustment from 0.2 to 1.8 rpm enables precise adaptation to specific welding processes. Table tilting range from 0° to 90° allows welding in the most optimal working position. Compact and stable construction with a robust body ensures safe operation even under high loads. Possibility of mounting a self-centering three-jaw chuck significantly facilitates the clamping of cylindrical components. Design and technology The CORMAK PS-650 welding positioner has been designed with a focus on durability and reliability. The construction includes a brass grounding sleeve, which allows the welding current connection to be transferred directly to the workpiece, ensuring maximum process efficiency. The drive system equipped with a 1.5 kW motor enables smooth and stable rotation of heavy components. The device is equipped with a foot control pedal and a wired hand controller, improving operator comfort and control. Precision and work efficiency The ability to set the table inclination at any angle within a range of up to 90°, combined with precise rotation speed adjustment, allows perfect positioning of the workpiece for a specific task. Rotation in both directions significantly speeds up the welding process and improves the quality of joints, ensuring repeatability and an aesthetic finish of welds. Applications The CORMAK PS-650 welding positioner is widely used in: steel construction plants, production and repair workshops, industries such as mechanical engineering, railway, and shipbuilding, painting facilities and assembly departments. Thanks to the ability to rotate and position components at the most convenient angle, it greatly improves operator efficiency and reduces production times. Standard equipment CORMAK PS-650 welding positioner Foot control pedal Wired hand controller Power cable Operating manual Optional equipment Self-centering three-jaw chuck for pipes WP500 Self-centering three-jaw chuck for pipes WP600 Technical specifications Parameter Value Horizontal load capacity 650 kg Vertical load capacity 300 kg Table diameter 650 mm Centering hole size 80 mm Table tilting range 0° ~ +90° Rotation speed range 0.2–1.8 rpm Speed adjustment Smooth Overall length 850 mm Iedpfx Ahouc Tdqs Estl Overall width 700 mm Overall height 680 mm Gross weight 230 kg Power 1.5 kW Power supply 400 V CORMAK welding positioners are proven and reliable solutions for professional industrial facilities. Increase precision, reduce production time, and improve welding quality with the PS-650 model.

Condition: new, Year of construction: 2026, CORMAK PS-500 Welding Positioner The CORMAK PS-500 welding positioner is a versatile auxiliary device designed for a wide range of production applications. Its extensive capabilities make it an excellent solution wherever precise manipulation of components is required. The welding, painting, and mechanical industries appreciate the quality, durability, and functionality of CORMAK positioners. These devices are the ideal choice for applications where components or assemblies need to be rotated, wound, or positioned. Additionally, the machine is equipped with a tool holder adjustable in multiple planes, increasing its versatility and ease of use. Main features Rotation switch and direction selector – allow precise control of the rotary table rotation direction. Smooth speed adjustment – enables adjustment of table rotation speed according to specific work requirements. Compact construction – a robust and rigid design ensures durability and long service life. Foot control pedal – provides convenient and precise operation control. Thermal protection fuse – additional protection against overheating. Brushed motor – efficient and versatile, suitable for various industrial applications. Table tilt range of 0–90° – enables welding in different working positions. Possibility of mounting a centering chuck – supports accurate positioning and alignment of components. Universal grounding slot – allows connection of the welding ground without reconnecting it after each table rotation, improving convenience and work efficiency. Advantages Higher productivity – improves the efficiency of assembly and welding processes. Reduced production costs – automated component rotation contributes to savings. Repeatable weld quality – ensures consistent and uniform results. Operational flexibility – adjustable speed and rotation direction make the device suitable for many applications. Improved working conditions for welders – enables more comfortable and ergonomic working positions. Standard equipment includes PS-500 welding positioner Foot control pedal Power cable User manual Welding torch holder mast Optional equipment Self-centering three-jaw chuck for tubes WP400 Self-centering three-jaw chuck for tubes WP500 Technical specifications Parameter Value Horizontal load capacity 300 kg Vertical load capacity 150 kg Working table diameter Ø500 mm Centering hole diameter 140 mm Tilting angle 0° ~ +90° Rotation speed 0.2 ~ 2.5 rpm Motor power 200 W Tilting speed Manual Voltage 220 V – 1PH – 50 Hz Dimensions 700 × 650 × 710 mm Weight 97 kg Note: The three-jaw chuck is not included in the standard package. The CORMAK PS-500 welding positioner is an indispensable tool for the welding industry, significantly simplifying the rotation and positioning of components while improving work quality, efficiency, and operator comfort. Itsderigmgopfx Ah Eol The WP400 and WP500 self-centering chucks are perfectly suited for the PS-500 welding positioner. These advanced solutions provide precise and stable component clamping, significantly improving welding quality and productivity. Choosing these chucks ensures comfortable operation and excellent results.

Condition: new, Year of construction: 2026, CORMAK PS-310 Welding Positioner The CORMAK PS-310 welding positioner is a professional tool designed to support welding and assembly processes in industrial facilities. Combining precision with high functionality, it is an indispensable solution wherever accurate rotation and positioning of components are required. Thanks to adjustable tilting angle and rotation speed, the PS-310 welding positioner provides effective support for the operator, improving weld quality, reducing production cycle times, and increasing overall process efficiency. Main advantages of the machine Isdpfx Asrigk Neh Eotl High working load capacity: 30 kg in horizontal position and 15 kg in vertical position, allowing operation with various components. Ø310 mm working table: provides stable mounting of workpieces with different dimensions. Smooth rotation speed adjustment: from 1 to 15 rpm enables precise adaptation to the welded component. Adjustable tilting angle 0°–90°: allows the operator to work in the most ergonomic position. Durable construction: compact steel body resistant to workshop loads and intensive use. Full process control: rotation direction switch, thermal protection, brushed motor, and foot pedal control. Ground connection slot: simplifies connection of the welding ground without the need to switch it during rotation. Design and technology The CORMAK PS-310 welding positioner has been designed for intensive operation. The rotary table with a diameter of 310 mm allows installation of a wide range of welding fixtures and components. The drive system is based on a 120 W brushed motor, ensuring stable operating parameters even under load. Manual tilt adjustment allows positioning of the table within a range of up to 90°. Control elements, including the foot pedal and switch panel, are ergonomically positioned and intuitive to operate. The built-in thermal protection system prevents overheating and increases the service life of the device. Precision and work efficiency Precise adjustment of the table rotation speed in the range of 1–15 rpm allows the operator to adapt working parameters to the type of weld being performed. The rotation direction change function enables optimization of the welding path. Welding positioners from this series improve weld quality, reduce errors, and shorten operation times. Repeatable positioning of components ensures consistent technological processes. Applications The PS-310 welding positioner is an excellent choice for production plants, service workshops, welding facilities, and companies involved in assembling cylindrical components, pipelines, tanks, and frames. The device is widely used in industries such as: structural welding, boiler and tank manufacturing, painting industry, valve and fittings production, assembly of pipes and steel components, production process automation. Standard equipment CORMAK PS-310 welding positioner Foot control pedal Power cable Welding torch holder mast User manual Optional equipment Self-centering three-jaw chuck WP200 Self-centering three-jaw chuck WP300 Technical specifications Parameter Value Horizontal load capacity 30 kg Vertical load capacity 15 kg Working table diameter Ø310 mm Tilting angle 0° ~ +90° Rotation speed 1–15 rpm Motor power 120 W Tilting adjustment Manual Voltage 220 V – 1PH – 50 Hz Dimensions 500 × 500 × 440 mm Weight 34 kg Note: The three-jaw chuck is not included in the standard package.

Condition: new, Year of construction: 2026, CORMAK PS-360 Welding Positioner The CORMAK PS-360 welding positioner is a high-quality rotary positioner designed for professional industrial applications. Developed with ergonomics, efficiency, and precision in mind, it is an essential support tool for welding and assembly of cylindrical components, pipes, and parts with complex geometries. It enables efficient manipulation of workpieces, allowing welding in the optimal position, which significantly improves weld quality and operator working conditions. Main advantages of the machine Professional welding positioner with adjustable rotation speed and tilting function of the working table. High load capacity: up to 100 kg in horizontal position and 50 kg in vertical position. Smooth rotation speed adjustment: from 0.2 to 5 rpm, suitable for precise TIG and MIG/MAG welding processes. Itedperigl Uofx Ah Eol Compact design: ideal for workshops, production lines, and automated welding stations. Ground connection slot: ensures a continuous electrical connection without the need to change the ground connection after each rotation. Design and technology The PS-360 welding positioner has been designed for intensive industrial operation. The robust steel frame ensures excellent stability and rigidity, while the manual tilting mechanism allows the working table to be positioned at an angle of up to 90°. A 120 W motor provides sufficient torque for handling heavy cylindrical and tubular components. The control system consists of a control panel and foot pedal, allowing the operator to maintain full control over the welding process. Precision and work efficiency Using the CORMAK PS-360 positioner significantly improves weld accuracy and repeatability. Welding in a fixed, ergonomic position reduces the risk of operator errors and eliminates the need for frequent repositioning of components. Smooth speed adjustment allows the rotation speed to be matched to the specific application, making the PS-360 an excellent solution for both precise TIG welding and more dynamic MIG/MAG welding processes. Applications The PS-360 welding positioner is used in a wide range of industrial production and assembly processes: Welding of pipes, flanges, shafts, and cylindrical components Production and repair facilities – welding and assembly lines Welding, painting, and mechanical industries Robotic and automated welding stations Standard equipment CORMAK PS-360 welding positioner Foot control pedal Power cable Welding torch holder mast User manual Optional equipment Self-centering three-jaw chuck WP200 Self-centering three-jaw chuck WP300 Technical specifications Parameter Value Horizontal load capacity 100 kg Vertical load capacity 50 kg Working table diameter Ø360 mm Tilting angle 0° ~ +90° Rotation speed 0.2 ~ 5 rpm Motor power 120 W Tilting adjustment Manual Voltage 220 V – 1PH – 50 Hz Dimensions 530 × 550 × 500 mm Weight 49 kg Note: The three-jaw chuck is not included in the standard package.

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, Equipment: type plate available, manufacturer: PECO N30 Iodpfxjxlr Tde Ah Estl rated power: 40/80 kVa KB 1970 production can weld in 2 directions rather water cooled, air operated Kb 32 A can weld 500mm in length voltage: 380v 50 Hz

Condition: new, Year of construction: 2026, Equipment: documentation/manual, Laser welding machine with 3 kW laser power, laser components from Siemens - welding machine with genuine CE and therefore also German manual, risk analysis and everything that is required to be able to operate a laser welding system in Germany. Wire feed case, also with genuine CE, is also included in the delivery. An introduction can take place here in the company. Itoden Sl D Repfx Ah Eol

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 730 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 24 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 3,000 W, laser wavelength: 1,080 nm, Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine AIRTECH 3 kW – Top Technology for Efficient Sheet Metal Welding Discover the smart and powerful solution for precise laser welding: the Airtech handheld laser welding system with 3,000 watts of power! Ideally suited for demanding sheet metal fabrication – efficient, safe, and highly flexible in use. Highlights and Features: - Power: 3,000 watts for top welding quality and speed - Laser wavelength: 1080 nm, continuous operation with modulation frequency up to 20 kHz - Handheld laser welding head – optimally positioned for comfortable operation - Robust housing, intelligent internal layout for maximum service life - Touchscreen display for easy operation - Optional automatic multifunction wire feeder - Safety features: three-color alarm, safety interlocks, misuse protection mechanism - Cooling via separate water circuit with 13-liter tank capacity - CE-certified components according to European standards Itodpjwzv D Isfx Ah Ejl Your Advantages - Safe operation thanks to extensive protection mechanisms and alarm systems - Flexible applications including automatic wire feeding and robotic integration - Low operating costs and easy maintenance through well-designed technology and durable components For more information or a consultation, the Airtech team is happy to assist you!

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, functionality: fully functional, type of input current: three-phase, total height: 1,420 mm, total width: 560 mm, total length: 1,100 mm, input voltage: 400 V, ground cable length: 4,000 mm, overall weight: 100 kg, warranty duration: 12 months, type of cooling: water, hose package length: 4,000 mm, electrical fuse: 32 A, DGUV certified until: 08/2027, welding power (max.): 19 kVA, open-circuit voltage: 61 V, welding current at 60% duty cycle: 470 A, welding current at 100% duty cycle: 420 A, space requirement height: 1,770 mm, space requirement width: 600 mm, space requirement length: 1,250 mm, input current: 30 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 500 A, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, We are offering this Böhler Welding TERRA NX 500 PME Rockstar welding machine, a showroom model from 2025, for sale. The package includes a wire feeder, a 1.5m intermediate hose set, a 4m UP/Down welding torch, and a ground cable. Itodpozvmi Iofx Ah Esl If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2008, load capacity: 7,500 kg, Max. tool width: 3300mm Max tool height: 1630mm Table size: 1400x380mm / side Cas27Wn8Iy Load capacity: 15000 kg Turning load capacity: 7000 kg Itsdpfx Ahsup Aapj Esl

Condition: excellent (used), Machine ready for operation. 1000-litre tank. 500-litre tank. The station was used for cleaning a soup and mayonnaise production line. Please check my other listings as well. Iodpfxsytm Tis Ah Estl

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, year of last overhaul: 2011, Equipment: CE marking, documentation/manual, Friction welding machine from the manufacturer MTI, equipped for welding turbochargers. The machine is equipped with: - Siemens PLC, CPU 315, - Rexroth hydraulics - German user interface - CE marking Upon request, this machine can also be converted for many other welding tasks. Iodpov Uzf Esfx Ah Eetl We can also produce your friction welding joints, up to 300 tons of clamping force. Please contact us for further information!

Year of construction: 2006, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch Itedpfx Aoxy Hqtoh Ejl -Manufacturer: Messer Cutting & Welding, machine cutting torch, flame cutting machine -Type: Quicky -Cutting speed: adjustable -Voltage: 230 V 40 W -Dimensions: 520/280/H330 mm -Weight: 7.8 kg

Condition: new, Year of construction: 2025, HW 1.5kW is a high-performance, compact fiber laser welding machine designed for maximum efficiency and precision. Technical Specifications: Laser Source Power: 1.5 kW (MAX Laser Source) Welding Speed: 0 - 120 mm/s Welding Spot Adjustment: 0 – 5 mm (Spiral Wobble function) Wire Feeding: Automatic system included Fiber Cable Length: 15 meters Power Supply: 220V / 380V Iodpfx Ahszkkays Estl Dimensions: 1,000 x 630 x 910 mm Weight: 230 kg Certification: CE Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: used, functionality: unexamined, type of input current: three-phase, total height: 3,000 mm, total length: 3,000 mm, input voltage: 380 V, type of cooling: water, welding current at 60% duty cycle: 1,000 A, welding current at 100% duty cycle: 800 A, welding current (min.): 250 A, welding current (max.): 1,250 A, Used ESAB submerged arc welding (SAW) system for sale, manufactured by ESAB AB / ESAB Welding Equipment AB, Sweden. The system is designed for mechanized submerged arc welding (SAW), including tandem welding AC/DC. It is suitable for welding long, straight seams, beams, profiles, sheet metal structures, cylindrical products, vessels, tanks, and heavy welded structures. Manufacturer: ESAB AB / ESAB Welding Equipment AB Country: Sweden Process: SAW – Submerged Arc Welding Type: Mechanized welding system / tandem welding system Inscription: UP Tandemschweißen Welding: DC + AC with ESAB power sources Welding head: Available, with flux hopper Work beam / chassis: Long ESAB welding beam / tractor Condition: Dismantled / stored, available for inspection Welding power sources ESAB TAE 800 Parameter Data Itsdpjzimbkjfx Ah Eol Model ESAB TAE 800 Range 300 A / 28 V – 800 A / 44 V 100% duty cycle 800 A / 44 V 60% duty cycle 1000 A / 44 V Power supply 400 / 415 / 460 / 500 V, 50 Hz Protection IP23 ESAB LAE 1250 Parameter Data Model ESAB LAE 1250 Type Welding rectifier Range 250 A / 24 V – 1250 A / 44 V 100% duty cycle 1250 A / 44 V Power supply 220 / 380 / 415 / 500 V, 50 Hz Protection IP22 Weight 490 kg Data from the tandem welding plate Mode Current Voltage Direct current / DC 520 – 580 A 28 – 30 V Alternating current / AC 550 – 620 A 34 – 36 V Travel speed: 680 – 800 mm/min. Included components: long ESAB welding beam / chassis; welding head; flux hopper; cables and hoses; control boxes; ESAB TAE 800; ESAB LAE 1250; submerged arc welding equipment. Condition: The system is used and is currently dismantled / stored out of active operation. Visible signs of use, dust, dirt, and storage are present. It is sold in its current condition, with the equipment shown in the pictures. On-site inspection and technical verification by the buyer are recommended before purchase.

Condition: new, Year of construction: 2025, HW 3 in 1 Welding cleaning Cutting with 2kw Max laser power is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price Welding seam requirements: ≤0.5mm Welding speed: 0-120mm/s Cooling method: dual temperature dual control intelligent refrigerator Operation temperature range: 5-40℃ Price is EXW (Stock Europe), Include loaded on truck. Isdpfxjk Radis Ah Eetl Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: EQWDCOM, type of input current: AC, ZDI Quality Welding Consumables, Wires, Rods TIG Welding, Robotic Welding, Qualified Manufacturer, Quality Guaranteed. Itedpfx Aoyaw Haeh Esl Wires, Rods, Stainless Steel, Nickel and Nickel Based Alloys, Strip Cladding. ERNiCrMo-3, ERNiCrMo-4, etc.