Welding turntable, welding positioner

ESS DT 50

Condition: new, Bernardo horizontal bandsaw HBS 275-400 V Technical specifications Cutting capacity round 90 ° and 225 mm Cutting capacity 90 ° 200 x 200 mm square Section flat 90 ° 245 x 150 mm Cutting area around 45° 160 mm Section square 45 ° 160 x 160 mm Cutting area around 60 ° 100 mm Cutting range, square 60 ° 100 x 100 mm Dodpsd Du T Iefx Aiwjut Working height 910 mm Band saw blade dimensions 2480 x 27 x 0,9 mm Cutting speeds of 400 V 45 / 90 m / min Coolant pump S1 100% 100 W S1 motor power output 100% 1,1 kW Motor power S6 40% 1,5 kW Voltage 400 V Machine dimensions (L x D x H) 1430 x 720 x 1700 mm Weight approx. 190 kg Scope of delivery • Band saw blade • Workpiece stop • Base • Belt tension gauge • Vise with quick locking • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Condition: new, Year of construction: 2023, arm reach: 1,400 mm, load capacity: 6 kg, New welding robot TIG OKIO AB6-C1400 -Country of origin: China -Type: AB6-C1400 -Number of axes: 6 -Reach: 1400 mm -Maximum payload: 6 kg Duodpfx Aioqnt N Dewet -Control cabinet -Remote control -Wire feeder -Welding source: TIG WSM400R -Cooler

Year of construction: 2022, condition: new, Load capacity: 10.000kg Speed: 0.03- 1.6 rpm faceplate diameter: 1.500mm, expandable to 2.500mm Duedpfxefxgp Uo Aiwjt welding current transmission: 800A

Condition: used, GOM - ATOS III Rev.02.1 - 3D Measuring Device Condition: Used, very good. Technical specifications: Camera system: 2 x 8,000,000 Camera pixels: 2048 x 2048 pixels (approx. 4 megapixels) Measuring field sizes XYZ: 150 x 150 x 100 mm up to 2000 x 2000 x 2000 mm Measuring point distance: 0.075 mm to 1.0 mm Scan time: approx. 2 seconds Measuring volume: 700 series (incl. calibration plate) Blue light technology: Precise measurements independent of ambient lighting. Includes computer equipment and USB dongle Software version: 2023 Includes Tritop System (camera, 2x 1m reference scales, license) Djdpoxr Umgsfx Aiwjut All in original cases With tripod, PC, rack, monitor, small tools, reference points, 1x probe Plug in and start working immediately…

Condition: used, Year of construction: 1987, pressure / t stroke / mm table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Dedpfeuddcajx Aiweut Type: SVRM 4-roller bending machine: Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.

Condition: new, carrying capacity 500 kg number of suction cups 6 suction cup dia. 215 mm Vacuum lifter VH 6-500 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. Dodjq Sc Auspfx Aiwjut - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm Djdpfx Aiohpktvowsut band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: like new (used), Year of construction: 2024, load capacity: 1,200 kg, Equipment: foot remote control, 1200 kg load capacity welding positioner, CE certificate. Very robust design. Infinitely variable speed from 0.05 to 0.7 rpm, higher speed available on request. Turntable diameter 1200 mm. Tilting up to 120°. Height horizontal 950 mm, tilted to center 720 mm. Hand and foot remote control. Dimensions: length 1.35 m x width 1.2 m. Dodpfx Ajd A Etueiweut

Condition: used, Year of construction: 2014, total height: 2,400 mm, total length: 4,500 mm, total width: 2,200 mm, Empty weight: 2.500 kg CNC Machining Center Biesse skill 12 24 G FT Year of construction 2014 Machine no. 60961 Recording HSK F63 10x vertical drilling 12 switch positions Software: BiesseWorks X axis 2465 mm Y-axis 1260 mm Z axis 324 mm Disassembled for transport on normal trailer; 4500x2200x2400mm; Own weight 2000kg - Details: - └ Description: Pallet with white control box does not belong to this machine - Year: 2014 - Documentation available: Yes - CE certificate present: No - Serial number: 60961 - Number of milling spindles [pcs.]: 1 - Type milling table: Flat table - Drilling unit present: Yes - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 12 - Vacuum pump present: Yes Dodpewnhanjfx Aiweut - └ Number [pcs.]: 1 - └ Brand: Becker - Working range X [mm]: 2465 - Working range Y [mm]: 1260 - Z-axis working range [mm]: 324 - Transport dimensions: 4500mm x 2200mm x 2400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: new, Year of construction: 2026, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Dedpfjg U Uv Rjx Aiwout Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S