Mot.Positionierer/welding Swivel + Tilt table

ESAB xxxx

Condition: as good as new (ex-display), Year of construction: 2023, Container rotating device, 10-ton lifting capacity Speed: continuously adjustable Hand and foot remote control Bsdpfed Nmx Tsx Agroww Diameter: 320mm to 2800mm Roller diameter: 300mm Speed: 6 - 60 m/h Power: 2 x 0.55 kW

Year of construction: 1985, condition: reconditioned (used), Technical Details : Wire Dimeter range- 4-12mm Gscxckebw Run out table - 4m Speed -80' m/min. Bwsdpfx Ajh In Thjgrew Reconstruction- 2022

Condition: used, sheet width 250 mm coil outside dia. 1400 mm weight max. in kg 2500 kg plate thickness 2 ... 4 mm straightening feed 2,5 ... 15 m/min coiler: expanding range mm total power requirement 1 + 4 kW weight of the machine ca. 1,8 t dimensions of the machine ca. m decoiler, MHR 250/4: max. coil diameter: 1400 mm Bwodpfx Agsfn Aqmorow coil diameter inside: 450 - 530 mm unbraked decoiler with pressure roller straightening machine, MR 250/4: Belt infeed height: 1250 mm The system was dismantled, checked and repainted.

Condition: new, Year of construction: 2026, CORMAK PT265 Planer Thicknesser The CORMAK PT265 planer thicknesser is a professional woodworking machine designed for intensive and precise processing of solid wood and wood-based materials. The new version of this machine features an innovative connected table system that significantly improves work efficiency and eliminates adjustment errors typical of older designs. With a 2.6 kW motor and a stable construction, the PT265 is a reliable solution for carpenters, craftsmen, and production workshops requiring accuracy, durability, and consistent machining results. Main advantages of the machine New connected table system – synchronized calibration of the infeed and outfeed tables eliminates setup errors and improves machining precision. Stable cast iron construction – the 170 kg machine weight minimizes vibration and increases operating safety. Powerful S6: 2.6 kW motor – provides smooth and efficient processing of hard wood species. Quick conversion from surface planer to thickness planer – fast mode switching reduces downtime. Three HSS knives – ensure precise cutting and excellent surface quality. 265 mm planing width – allows processing of wider workpieces. Design and technology The CORMAK PT265 is a modern woodworking planer thicknesser based on a reinforced construction with cast iron components. The working tables are ground and properly balanced to ensure repeatable accuracy and precision. The innovative connected table system enables synchronized height adjustment – once the table level is set, no further calibration is required when changing the planing thickness. The centrally positioned thickness planer table mounted on a guiding column ensures even material feeding without deviations. Rubber anti-vibration feet additionally reduce vibration, improving component durability and machining quality. Precision and working efficiency Thanks to the 2.6 kW (S6) motor, the machine provides high efficiency while maintaining stable operating parameters, even when processing hard wood species. The Ø75 mm cutter shaft with three knives and a speed of 4000 rpm guarantees a perfectly smooth surface finish. The precise graduated scale allows accurate adjustment of the table height. The aluminium tilting fence (700 × 150 mm), adjustable from 90° to 45°, enables precise material straightening at various angles. Bwodpfevxhznex Agrew Standard equipment Cutter shaft with three HSS knives Aluminium fence 700 × 150 mm Graduated handwheel for table height adjustment Cutter shaft guard Built-in Ø100 mm dust extraction outlet Rubber anti-vibration feet Technical specifications Parameter Value Cutter shaft diameter 75 mm Cutter shaft speed 4000 rpm Dust extraction outlet diameter 100 mm Tilting fence angle range 90–45° Number of knives 3 Shaft length 262 mm Knife dimensions 250 × 25 × 3 mm Maximum surface planing width 265 mm Maximum thickness planing width 265 mm Maximum planing height 180 mm Maximum thickness planing cutting depth 3 mm Maximum surface planing cutting depth 2.5 mm Thickness planer feed speed 6 m/min Fence dimensions 700 × 150 mm Machine dimensions (L × W × H) 1080 × 269 × 1000 mm Weight 170 kg Total motor power S6: 2.6 kW Power supply 400 V Operating manual (DTR) Included CE declaration Yes

Condition: new, weight max. 5,0 t workpiece diameter 100 - 2500 mm total power requirement 2 x 0,37 kW load capacity drive unit max. 2500 kg load capacity rotating unit max. 2500 kg table turning speeds 100 - 1000 mm/min diameter of running wheel 250 x 140 mm weight of the machine ca. 0,9 t Bjdpfx Aegvwgcogrjww Incl. double foot pedal (start-stop / left-right) Incl. remote control (on the cable)

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. Bjdstmqi Depfx Agroww The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: used, Year of construction: 1992, machine/vehicle number: 150258, Offer 24348 Bsdpfxout Uiqo Agrsww Technical data: - Infinitely variable pressure capacity 15 t - Infinitely variable stroke 150 mm - Mandrel bending device up to 6000 mm - Mandrel bending angle 180 ° - Drive 400 V / 4 kW - Space requirement approx. W 1500 x H 1200 x D 1100 / 7500 mm - Weight approx. 1500 kg - Bending capacity - Bending capacity horizontal bending flat bars 120 x 10 mm - Tube bending ( pressing process ) up to approx. 11/2 " - Mandrel bending up to 42 mm - Bending tools - Tube bending tools Horizontal bending - Mandrel bending tools steel approx. 21.3 R 50 ; 26.9 R 57 ; 30 R 67 ; - 33.7 R 72.5 ; 42.4 R 92.5 ; mm - Mandrel bending tools plastic approx. 10 R 60 ; 12 R 65 + 85 ; 17.2 R 100 - 28 R 65 ; 33.7 R 120 ; 36 R 100

Condition: used, Year of construction: 1990, machine/vehicle number: 2316-3, Lg.no. 10622 Technical data: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drill spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm Bwsdpfx Agju Et Nbjrow - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine

Condition: new, Year of construction: 2024, Protec KT 10000 welding positioner Complete set with hand-held remote control 10,000 kg load capacity Diameter of the clamping plate: 2000 mm Height when tilted: up to 1600 mm to the center Bwedpfx Aoid Szvogrew Height in horizontal position: 1920 mm Speed: continuously adjustable from 0.01 to approximately 0.35 RPM (higher speeds possible) Tilting angle: up to 120° Length: 2800 mm Width: 1920 mm Foot pedal remote control available at an additional cost of €390.

Condition: good (used), various counter bearing support blocks, rollers 5-fold adjustable for transverse and longitudinal rotation to relieve e.g. the welding rotary table or to transport pipes different versions Bodsl Dwnlepfx Agroww Height adjustment in steps or stepless different heights The carriers themselves have a load capacity of up to 8 tons prices from 480.-€ to 850.-€