Used Welding Converter for sale (7,863)

Year of construction: 2024, condition: ready for operation (used), A nearly unused complete factory for the production of battery housing frames is available. It features the following processes: handling, welding, riveting, Rivtac, screwing, gluing, sealing, measuring and testing. 1) Handling & logistic: component handling, feeding, transfer, positioning, discharge. 2) Riveting & Rivtac: stand riveting, Rivtac joining, fastener inspection. 3) Screw processes: pick & place double screwdriver, simultaneous triple screwdriver, final assembly screwing. 4) Arc welding: large block welding process, welding stations, fourfold clamping concept, rotation devices and trunnion fixations, automatic discharge for NOK. 5) Adhesive & sealer application: brushing & dry cleaning, adhesive application, sealer application, camera inspection and discharge for NOK. 6) Adhesive cleaning & surface preparation: dry tape cleaning and manual tape change. 7) Stud welding, positions: 7. 8) Measuring and testing procedures: geometry measurement before milling with NOK scrap, final measurement, seam inspection, leak test, final inspection, cap installation, leak station, laser marking with NOK scrap procedure. 9) Rework area: robot-supported leak test with sniffing method and 2x manual rework stations. The factory was hardly used and only approximately 1000 components were produced with it. Documentation available. An on-site inspection is possible. Lodpfx Agjxwn Ize Rshp

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Lsdsmk S Slspfx Ag Rjhp Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language.

Year of construction: 2002, condition: good (used), functionality: fully functional, Single head PVCu window welding machines. Excellent condition, Easy to use fully ready for work. Power supply 230V. The welding angle of the product is changed from 30 ° -180 °. Lsdpfx Agorkm Sgj Rshp

Condition: like new (used), water-cooled, pneumatically actuated spot welding gun with 5/2 solenoid valve Make: DALEX Type: 3228-4 Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 13.5 kA Electrode force: 270 daN Arm spacing: 130 mm Arm reach: 350 mm With double stroke cylinder Long stroke: 75 mm Pre-stroke: 50 mm Working stroke with adjustable height: 0-25 mm Lhedpfx Agexwlzlo Rep Cardan suspension and suspension bracket 10 m connection cable and control cable Includes: External welding controller MPS 15033 The spot welding gun shows hardly any signs of use and is in like-new condition.

Condition: as good as new (ex-display), emotron frequency converter (28254) Lhjdeh Dm E Ujpfx Ag Rop Type U2T-7,5/400 - MIEMC 7,5 kw 0-100 Hz weight 26 kg height 500 mm width 300 mm depth 240 mm unused

Condition: new, Year of construction: 2024, machine/vehicle number: 23GS101972, fuel type: diesel, motor manufacturer: Kubota D1105-EF02, General information Field of application: Construction Weights Empty weight: 450 kg Functional Generator capacity: 15 kVA CE mark: yes Other information Frequency: 50 Voltage: 400 Lsdpfxorulz Ee Ag Rjhp Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 38 l Transport dimensions (LxWxH): 1,625x0,772x1,065 Production country: IT Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Year of construction: 2013, condition: ready for operation (used), A self-built powder welding machine with a power source Kennametal and an MTA cooler for applying Stellite to valves is available. 1) Cooler MTA TAE EVO 10M, year of construction: 2013, cooling capacity: approx. 3kW, refrigerant: R407, filling quantity: 0.8kg, max. operating pressure: 28bar, flow rate: approx. 0.59m³/h. Machine dimensions X/Y/Z: approx. 600mm/600mm/800mm, weight: approx. 100kg. 2) Power source Kennametal Stellite PTA Junior Star, year of construction: 2013, open circuit voltage: 75V, welding current range: 10A/10V-250A/38V, protection class I. Documentation available. An on-site inspection is possible. Lodpoxwn Nljfx Ag Rjhp

Condition: used, Year of construction: 2002, SEW Movitrac Frequenzumrichter 31C011-503-4-00 RA1284 Hersteller: SEW Eurodrive Typ: Movitrac 31C011-503-4-00 Zustand: gebraucht/ geprüft/ voll funktionsfähig Version: 011-503-4-00 Preis: zzgl. MwSt. ab Zentrallager Dr. Sonntag GmbH & Co. KG 97076 Würzburg Ledpfx Agok Abqqs Rjhp

Year of construction: 2023, operating hours: 180 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 11124, Welding fume extraction unit from "reder systems". Dimensions (L-W-H): 1700x900x2300 mm, air flow rate: 4000-6000 m³/h. Includes piping and 8 extraction arms for equipping 8 welding stations. The system is dismantled and ready for transport. Lhodpfx Agjxl Dpqe Rep

Condition: excellent (used), Hand-operated, water-cooled spot welding gun DALEX Type A 3119 with double-stroke mechanism and short-stroke latch Short stroke 25 mm – long stroke 57 mm with electrode force switch and secondary transformer for current monitoring Rated power at 50% duty cycle: 8 kVA Lhodpfsg Ew H Nex Ag Rop Secondary short-circuit current: 9.5 kA Electrode force: 180 daN Arm gap: 120 mm Arm reach: 250 mm with synchronous welding control RS 11-2 Main switch, connection cable, and 16 A CEE plug Extensive range of water-cooled electrode arms in stock

Condition: used, Just received MILLER (USA) mobile welding machine Lhedoxv Suvspfx Ag Rjp

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, pivoting range: 135 °, Equipment: foot remote control, 3-axis welding positioner Protec KT 10 000 HV Complete set incl. hand and dual foot remote controls Digital speed display Hydraulic height adjustment Tilting range 0 to 130° Lsdpext Tgnsfx Ag Rohp Dimensions: Min. tilted height: 1050 mm Max. tilted height: 2200 mm Min. horizontal height: 1360 mm Clamping plate diameter: 2000 mm Length: 3250 mm, width: 1700 mm Speed from 0.05 to approx. 0.6 rpm (range from 0.05 to 1.2 rpm possible)

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, servo controller, control system, converter, PLC control system, power supply unit, inverter, servo drive, drive controller -Manufacturer: KEB, Frequency converter Drive Controller Combivert -Type: F5 Ljdpjxt Hpcofx Ag Rohp -Item No.: -3AHA -Power: 4.0 kVA -Dimensions: 320/90/H220 mm -Weight: 3.7 kg

Condition: used, Year of construction: 2005, filter area: 126 m², suction capacity: 6,000 m³/h, Dust extraction, welding fume extraction, filtration ventilation, self-cleaning pneumatic vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. Donaldson Torit model: TDP 1350 Cartridge filter elements are pneumatically cleaned during operation with compressed air pulses, ensuring high device efficiency. The fan is positioned after the filter on the clean side, reducing explosion risk to a minimum. Year of manufacture - 2005 Fan power 7.5 kW Capacity 6000 m3/h Filtration surface area 126 m2 Inlet diameter - 315 mm Donaldson Ultra WEB filter cartridges – 6 pcs. Stock no.: 1026 Height - 3.80 m Width - 1.32 m Depth - 1.36 m Lhsdpfxow Hrxfj Ag Rop Base: 1.25 m x 1.25 m

Condition: used, Dalex Works Pms 10-2 380V Lhjdjg Rcpxopfx Ag Rop 50Hz rated power at 50 duty cycle: 63 kVA secondary short circuit current: 45 kA rated primary voltage 380 V - 50 Hz open circuit voltage of 5,6 V electrode force: 65-390 daN Machine weight 341 kg

Condition: excellent (used), Year of construction: 2012, operating hours: 90 h, functionality: fully functional, type of input current: three-phase, total height: 1,100 mm, total width: 500 mm, total length: 1,200 mm, Orbital welding of pipes on site (with or without oscillation, depending on pipe thickness) with assembly! Pipe diameter from 25–115 mm Pipe thickness from 1–8 mm Inside includes a pipe cutter, welding arm, remote control, equipment with cooling system everything you see in the pictures. Length x width x height 1200 × 500 × 1100 Lhsdpfx Aov Di S Ejg Rep

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: VOK 499E-S, Equipment: documentation/manual, Welding robot VOK 499E-S, 7 axes, rotary base and standard wrist, working radius (reach) 2,600 mm Vertical mounting flange Wrist axis for single-wire welding, type DF-STD Robot control system with control cabinet, programming joystick console K6-JOY, control panel Lsdpfx Agsxv Aquo Rjhp Sensor system for touch seam searching using gas nozzle GNS, seam tracking from arc length AST Welding equipment – digital pulsed MIG/MAG welding power source, type TPS 500i Fronius Robot peripherals – rotary module with fully integrated axis, type DM 4000, column with vertical travel type RSH-150, boom for column with vertical travel type RSH/ARM-300, servo axis control for external axis Workpiece peripherals – free-rotating tailstock with one locked position, type RFP1000 Sliding rail for positioner – manual travel, type VBH1000 L-positioner, type RWM2/3000A, locking position 90° for L-positioner, servo axis control for external axis Cables and connecting harnesses Light safety curtain DATALOGIC, control unit for service doors Safety switch for “robot in predefined position” (safety feature) with control unit

Year of construction: 2007, condition: ready for operation (used), A 4-head welding machine Rotox for window construction is available. Profile height range: 30mm-125mm, max. profile width: 140mm, min. welding length with/without gasket forming unit: 320mm/430mm, max. welding length without/with gasket forming unit: 4000mm/4000mm, min. welding width without/with gasket forming unit: 430mm/500mm, max. welding width without/with gasket forming unit: 3500mm/3500mm, welding bead limitation: 0.2mm-2mm, material: uPVC hollow bar profiles, weight: approx. 3100kg. Documentation available. On-site inspection possible. Expected to be available from the end of 2026. Lhodpfexvru Nsx Ag Rop

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, servo controller, control system, converter, PLC control system, inverter, converter, servo drive, drive controller Lhodpfxoxt Hdae Ag Rjp -Manufacturer: Hitachi, frequency converter inverter -Type: WL200-004SFE -Power: 0.4 kW -Dimensions: 120/70/H130 mm -Weight: 0.7 kg

Condition: used, Year of construction: 2019, functionality: fully functional, Amps.: 300 Watercooled: Yes. Ljdpfxexvq Dcj Ag Rohp Control: TA 24. Year: 2019 Country of origin: Sweden. Size (L x W x H): 1150 x 620 x 1100 mm. Weight: 90 kg. With Esab water cooling unit, TA24 control panel and new Esab Exeor SR 21 4 m. TIG-hose. Machine have been tested and serviced. We have 2 machines of this type in stock.

Condition: used, functionality: fully functional, Year of construction: 2019, control type: CNC control, For sale: CNC stud welding system Manufacturer: AS Schweißtechnik GmbH Type: AS CNC 1000 x 2000 S/N: 2198149 Power: 6.4 kW Table size: 2,000 x 1,000 mm 2 stud welding units by Arnold, Type 1095MC-I 2 vibration feeders, Type: VBZ5000 Light barrier system Control: Beckhoff Used, fully functional condition. Collection by buyer; assistance with disassembly/transport can be arranged if required. — If you are interested or have any questions, feel free to send me a message. Inspection on site by appointment. Other metalworking machines available, such as bench drills, press brakes, column drills, eccentric presses, heavy-duty racks, welding tables, shielding gas welding machines, compressors, etc. – please check my other listings. or Net export Collection only – disassembly and transport by buyer or by arrangement If you are interested or have any questions, feel free to send me a message. Additional photos and technical details available on request. All information without guarantee or warranty, errors and prior sale excepted. For further information, please call Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Lhodpfx Agexvqrto Rop Viber / WhatsApp / Skype We handle all customs and registration formalities for a fee. We can deliver vehicles to the port for an additional charge.

Condition: ready for operation (used), Specifications: Supply voltage | V | 230 Frequency | Hz | 50 Run Hours: 2690 hours Type of current | Ph | 1. Engine power | kW | 2.4 Air flow volume max. | m³/h | 640 Negative pressure max. | Pa | 15000 Protection class | | IP54 ISO class | | F Extraction performance | % | >99 Width | mm | 365 Depth | mm | 768 Height | mm | 801 Weight | kg | 70 Sound pressure level | dB(A) | 70 Allowed ambient temperature | °C | +5 to +35 (during operations) | | -10 to +40 (during transport and storage) Max. temperature of polluted air at the capture point | °C | +50 Allowed max. humidity | % | 70 Good working condition. Please check out our other listings as well. Ljdpexvpumefx Ag Rohp

Condition: used, functionality: fully functional, Amps.: 650 Ledpfx Agjxvqz Us Rshp Watercooled: Yes. Wire feeder: Esab Feed 4804 MA24 Control: MA 24. Country of origin: Sweden. With synergic in wire box and 4,5 m. Esab PSF 510 welding hose. Machine have been tested and serviced.

Condition: used, Year of construction: 2013, functionality: fully functional, Amps.: 420 Watercooled: Yes. Year: 2013 Country of origin: Sweden. Lodpfx Ajxvqzbog Rjhp Size (L x W x H): 650 x 1100 x 1000 mm. Weight: 240 kg. With Esab PSF 315 4 m. welding hoze. Machine have been tested and serviced.

Condition: used, functionality: fully functional, Amps.: 400 Watercooled: Yes. Wire feeder: Esab Feed 304 M12. Ljdpfexvqy Dex Ag Rehp Country of origin: Sweden. Closed M12 wirebox with 4WD and new Esab MXL 411w 4m. welding hose. Machine have been tested and serviced.