Used Weinig Powermat for sale (480)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Weinig Powermat 600 2014 year of production Knsdov Dac Iepfx Affjf 5 spindles 3 kW feed motor 1 7.5 kW motor 2 11 kW motor 3 7.5 kW motor 4 7.5 kW motor spindle configuration - bottom, right, left, top, bottom soft start heated control cabinet (webasto) pneumatic tables manual control of the tops electronic brakes manual axis adjustment smooth feed regulation

Condition: excellent (used), Year of construction: 2008, operating hours: 8,000 h, Four-sided planer Weinig Model Powermat 400 LE - machine with ribbed table Year of manufacture: 2008 Operating hours: 8000 Maximum working width: 230 mm Maximum working height: 120 mm The machine is equipped with 5 spindles featuring the Powerlock system Spindle configuration: - bottom 5.5 kW - left and right – 7.5 kW each - top – 7.5 kW - bottom – 7.5 kW Spindle speed: 6000 rpm Feed speed steplessly adjustable via inverter: 5 – 30 m/min Electronic spindle positioning – Memory system The machine is in very good technical condition, complete with cutter heads. Kjdpowybrnjfx Affjnf

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: V001257, Profi-Joint Shaper 6000mm two stage press Includes PUR glue pump and applicator Ksdpfx Afev Ryb Rofonf Additional consideration: Sawdust extraction (A$20,000)

Condition: used, Year of construction: 2000, Storage location: Nattheim Knjdpfxjvwdmwe Affof

Condition: used, Four-side planer WEINIG Quattromat 18 -used- Reversible knife system, Lubricant pump, Dust tested ----- Technical specifications ----- Planing width: 180 mm, Planing height: 120 mm, Number of spindles: 4, Feed speed: 8 m/min, Extraction port Ø: 4x 120 mm, Dimensions (LxWxH): 3,050x1,000x1,500 mm, Weight: 1,200 kg Kedpfx Ajxqd Ahsffenf

Condition: excellent (used), Multirip saw Max. Cutting width 310 mm Chain width 340 mm Max. Passage width / input width 650 mm Max. Cutting height with Quickfix clamping flange 110 mm Saw shaft diameter 65 mm Min. timber length 500 mm Max. Feed speed 35 m/min, variable Motor power 22.0 kW, 400 V, 50 Hz Feed motor 1.3 kW, 400 V, 50 Hz Saw blade diameter min./max. 300/ 350 mm Working height 850 mm Extraction diameter 250 mm Required extraction volume 5300 m3/h Quickfix saw blade attachment Electric height adjustment of the saw shaft Electric height adjustment of the pressure unit Dimensions approx. L x W x H = 1750 x 1750 x 1500 mm Weight 1850 kg Incl options: Oil level monitoring SafetyPlus Quickfix Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. Kodpstwy Iuofx Affjnf - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: good (used), Year of construction: 1994, functionality: fully functional, 1 used Weinig four-sided planer UNIMAT 23, 5-head with stacking unit for board lengths up to 5.50 m Planing width: 230 mm Planing height: 150 mm Spindle diameter: 50 mm Knedpfxjx Ngiqo Affsf Spindle arrangement: bottom, right, left, top, bottom (with jointer) Total connected load: 37 kW Outfeed roller conveyor: 6000 mm long, 800 mm wide with transfer to left and right Left: transfer to stacking machine Right: board turner Stacking unit Lux for board lengths up to 5.50 m, width up to 1.30 m

Condition: used, Working width from to 40-150 mm Working height from to 18-50 mm 0 6100 mm Finger jointing line Weinig Grecon Profijoint ----- Technical Specifications: ----- 1. Milling machine: ----- Material length at entry: 150-700mm Material width: 40-150mm Material thickness: 18-50mm Jointing options: horizontal and vertical joint Milling spindle power: 15 kW Knedsx H Alvspfx Affof 2. Grecon PJ7/6100 Hydraulic Press for Joining: ----- Maximum length of finished element: 6100mm Material trimming saw Saw diameter: 350mm Cutting unit power: 2.2 kW Without tools (techncial details according to manufacturer, with gurantee)

Condition: excellent (used), functionality: fully functional, Working width: 230 mm Working height: 160 mm Knodpsx Hzv Tefx Affef Number of spindles: 5 Spindle configuration: 1. Bottom 15 kW 2. Right 11 kW 3. Left 11 kW 4. Top 15 kW 5. Bottom 7.5 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm 3 feed rollers in the work table Feed speed adjustable via inverter up to 60 m/min Feed driven by cardan shaft Pneumatic pressure rollers Technical documentation Machine dimensions: 300x180x170 cm (H) Weight: 3500 kg

Condition: used, Year of construction: 2005, Unimat 23 E: Working width (with cutter circle 140 mm): 20 – 230 mm. Working height (with cutter circle 163 mm): 8 - 120 mm. 1st spindle lower horizontal spindle: 7.5 kW, 2nd spindle right vertical spindle: 11 kW (shared with left vertical spindle), 3rd spindle left vertical spindle, 4th spindle upper horizontal spindle: 7.5 kW. Each spindle diameter: 50 mm. Each spindle speed: 8,000 rpm. Feed system: 4 kW. Mechanical feed, steplessly adjustable: 5-24 m/min. Working table: 2.5 m long (incl. joining fence). Knjdpfxevvkcij Affof Uniplan 23: Max. working width: 230 mm. Working height min.: 15 mm / max.: 120 mm. Feed: 3 kW. Horizontal spindles each 5.5 kW. Feed speed, steplessly adjustable: 6 – 36 m/min. Spindle speed: 6000 rpm. Spindle diameter: 50 mm. Tool clamping length: 240 mm. Max. tool diameter: 163 mm. Fixed lower chip removal: 0.5 mm. Short piece package for min. workpiece length: 280 mm. Mechanical spindle brakes up to 7.5 kW. Feed braking system up to 5.5 kW. 1st feed roller synchronized with photocell. Spindle speed 7200 rpm, incl. motor power 7.5 kW. Improved noise insulation of the full safety enclosure. Location: Customer

Condition: excellent (used), Year of construction: 1996, working width: 230 mm, planing height: 120 mm, spindle diameter: 40 mm, planing width: 230 mm, working height: 120 mm, power of feed motor: 4,000 W, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Unimat 23 with 5 spindles. Kedpfx Aex Ndb Rjffsnf Working width: 230 mm, Working height: 120 mm, Spindle diameter: 40 mm, Feed: 4 kW / 6 – 36 m/min, Spindle configuration: 1-Bottom 2-Right 3-Left 4-Top 5-Bottom Short-piece package Three powered rollers in the table. Note that the digital control system is defective – the machine operates only via manual adjustment. This means measurements are not displayed accurately and test pieces may be necessary. However, the defect is repairable.

Condition: excellent (used), Tenoning and Slotting Machine WEINIG Type 51 Pivoting studio window device with digital angle display Rolling table with automatic feed rate of 6 m/min. Rolling table length approx. 2,100 mm Pneumatic workpiece clamping Automatic countershaft change Crosscut saw Knedpsv Tb Hgofx Affef Pneumatically timed 4-station turret Motor approx. 3 kW / 380/400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slotting spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380/400 V / 50 Hz Spindle speed 3,000 rpm Tool diameter max. 320 mm Length stop system Machine including operating tools Installation dimensions L x W approx. = 2700 x 2800 mm Weight approx. 2000 kg Note on used machines: • Errors in technical specifications and prior sale excepted. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and function-tested. • All machines are sold as seen without any warranty claims. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: excellent (used), Catalogue number 7784 TECHNICAL DATA - Spindle diameter: 30 mm - Working height of spindle: 150 mm - Interchangeable spindle - Spindle locking - Adjustable up/down + angle - Original cast iron fence with full adjustment - 4 spindle speeds + left/right: 3000/5000/6000/10000 rpm - Table dimensions: 1120x800 mm Knedpfx Aext I Adeffof - Motor: 3.7 kW - Dimensions (L/W/H): 1100x1400x1160 mm - Weight: 775 kg ADVANTAGES – German-made – Used milling machine – Very good condition Net price: 6,900 PLN Net price: 1,640 EUR Net price calculated at a rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm control Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage ..... Machine dismantled professionally and in our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Technical data summary (please inquire about any additional accessories included) ..... crosscut saw ..... > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm Knedox H Al Nopfx Affef > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate ..... > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment path mechanically coupled with crosscut saw. > Radial adjustment pneumatically controlled on/off electronic length stop ..... > Length 4500 mm 1. Tap and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered 2. Tap and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered Transfer tape ..... Included for transferring the parts to longitudinal machining Separation of double parts before the start of longitudinal processing. 1. Profiling spindle (synchronous and counter-rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter 2. Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool fli...

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 870-5805, working width: 170 mm, planing height: 120 mm, planing width: 170 mm, spindle speed (max.): 6,000 rpm, workpiece height (max.): 120 mm, workpiece width (max.): 170 mm, number of spindles: 7, feed roller diameter: 140 mm, Width of the work piece to be processed 20-170 mm Thickness of the work piece to be processed 10-120 mm Length of the work piece to be processed L min 750 mm Kodpfxjx It A Uj Affjnf Permissible cutting depth: lower horizontal working unit 0-10 mm, right vertical working unit 0-10 mm Feed speed 6-36 m/min Diameter of feed rollers 140 mm, width 50, 30, 20, 15 mm Tool rotation speed 6000 rpm Number of working units: horizontal 3+1 pieces, vertical 3 pieces

Condition: excellent (used), Year of construction: 1994, FOUR-SIDED PLANER WEINIG Type: U 23 B.j 1994 Max working height: 180 mm Max working width: 230 mm Knedop R N Evopfx Affof 6 spindle

Condition: good (used), Year of construction: 2006, WEINIG MOULDER MACHINE MOD. UNIMAT 500 Kjdsq Ru Dyspfx Affsnf YEAR 2006 - EC STANDARD PRICE ON REQUEST

Condition: used, Weinig Profimat 23 planer and moulder for four-sided planing and profiling of wood with tools and an additional glazing bead saw for window production. spindles: 5 Kodpfjxc Hhwex Affjnf spindle 1: Below spindle 2: Right spindle 3: Left spindle 4: Upstairs spindle 5: Below spindle 6: Glasleistensäge working width: 230 mm working height: 120 mm Total performance: 28 kW Rated current: 60 A

Condition: like new (used), knife: WP Z2 V2 flight circle (ø): 160 mm Knsdpfjxvy Abex Affjf drilling: 40 mm length: 17 mm material: steel Labelling: MEC

Condition: used, Year of construction: 2000, Weinig Unimat 23E planer and moulder for four-sided planing and profiling of wood, with a mobile spindle for automatic adjustment and a grooved bed (optionally without grooved bed) for short and curved workpieces, as well as a long planing table. Included: Set of grooved bed cutters Optional: Conversion to a conventional smooth table, available upon request. spindles: 5 Knedowztw Sopfx Affsf spindle 1: Bottom / 40 mm / 5.5 kW spindle 2: Right / 40 mm / 7.5 kW spindle 3: Left / 40 mm / Common motor with spindle 2 spindle 4: Top / 40 mm / 7.5 kW spindle 5: Bottom / 40 mm / 5.5 kW working width: 230 mm working height: 160 mm

Condition: used, knife: Strip planer knife Z2 flight circle (ø): 163 mm drilling: 50 mm Kodpfjw Uiq Tsx Affsnf length: 180 mm material: steel

Condition: used, knife: Centrolock reversible blade Z2 flight circle (ø): 93 mm Kedpfxewffm He Affjnf admission: PowerLock HSK length: 240 mm material: steel

Condition: used, knife: Strip planer knife Z2 Knodpfxswma T Re Affef flight circle (ø): 125 mm drilling: 40 mm length: 240 mm material: aluminum

Condition: used, Used control cabinet of a Weinig type Unicontrol 10 as a spare parts carrier or for building a new control cabinet. Kodpfx Ajrrk I Hoffonf Contents include: * Siemens Simatic S5 * Siemens EMG 45

Condition: used, Used control cabinet of a Weinig type Unicontrol 6 as a spare parts carrier or for the new construction of a control cabinet. Contents include: Knjdpfx Aot Na Dreffef * Brake device Hilger and Kern * Transformer Rathgeber type ET 1000.