Leadscrew/feedscrew lathe/Condor VS 2

WEILER CONDOR VS 2

Condition: good (used), 1 used lead and feed screw lathe Make: Weiler Cgjdpew Rcrcsfx Ailsw Model: Condor VS 2 Technical Data: Centre height: 160 mm Centre distance: 800 mm Spindle bore: 40 mm Bed width: 240 mm Speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock taper: MK 3 Quill stroke: 110 mm Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (W x D x H), approx.: 1930 x 880 x 1470 mm Equipment: 3-jaw chuck Quick-change toolholder system Multifix

Condition: used, Year of construction: 2001, Universal lead and feed screw lathe Manufacturer: GDW Model: LZ 360 S Cjdpoy H Di Njfx Ailjgw Year of manufacture: 2001 - workshop tested Machine no.: 1104 071 Geometric acceptance with test protocol Centre height: 175 mm Centre distance: 800 mm Accessories: - 3-axis digital display FAGOR NVP 300 TS-RS with switchable constant cutting speed - Retrofit kit for converting tailstock from crank tailstock to lever drilling tailstock - Chuck guard with electrical interlock - Braked drive motor - Emergency stop (dual, left and right) - Quick-change tool post, base body size B - Bed stop - Rear chip guard - Removable chip tray - Coolant unit - 2 fixed centers MK 3/60° - Safety driver plate - Operation keys - CE declaration of conformity - CE documentation (operation manual) Used, sold as-is without warranty The machine's technical specification corresponds to the manufacturing year.

Condition: ready for operation (used), WEILER Condor VS 2 with new 3-axis digital readout from university (test laboratory) - New 3-axis digital readout - Guideways in "as new" condition - Centre height: 165 mm - Swing over bed: 330 mm - Distance between centres: 800 mm - Speed range: 28-2800 rpm - Automatic longitudinal / cross feeds - Spindle bore: 40 mm - Thread cutting / metric / imperial etc. - Collets / quick-clamping device incl. collets - 4-jaw chuck - Röhm - Face plate - Multifix toolpost with holders Cgsdpsy Efqrsfx Ailjw - Emergency stop - Chuck guard - Documentation Dimensions: LxWxH 2x0.8x1.6 meters / Weight: 900 kg Subject to errors and input mistakes.

Condition: good (used), Year of construction: 1973, Centre height: 150 mm Centre distance: 760 mm Max. turning diameter over bed/cross slide: 300/165 mm Spindle bore: 32 mm Spindle mount, short taper per DIN 55027: Size 5 Quill taper of tailstock: MT 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 inch threads: 75 - 2.5 TPI 19 module threads: 0.1 - 1.75 module Cgedpfxoyu R Nkj Ailow 19 diametral pitch threads: 70 - 4 DP Electric drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Required space: 1800 x 770 x 1300 mm

Condition: used, Year of construction: 1971, turning diameter over bed 297 mm turning diameter over bed slide 160 turning length 500 mm short taper holder Größe 5 spindle bore 36 mm spindle turning speed range 30-3550 U/min number of speeds 18 quill adjustment 90 mm tailstock quill taper MT 3 cross adjustment +15 tailstock adjustment - manual 500 mm weight of the machine ca. 610 kg dimensions of the machine ca. 1,4 x 0,7 x 1,2 m cessories: Forkardt V-block chuck, Ø 160 mm Collet chuck, Collets (see photo) Cjdpey Hxp Djfx Ailjgw Steel Multifix system, size A with 3 quick-change inserts rotating center point chip guard chuck guard fixed steady rest The machine comes from the training workshop of a renowned German corporation.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 4397, Ladies and Gentlemen, We are selling a Weiler Praktikant 160 AC lathe built in 1998 with original Weiler 3-axis digital readout. This newer version "AC" stands out above all due to the infinitely variable speed control, which makes working on the otherwise very user-friendly machine even easier. The machine has been extensively overhauled in our workshop so that it is technically and visually in excellent condition. All guides are in good order, the gears run quietly and the levers are easy to operate. You are welcome to visit us on site to see the condition for yourself. Availability: on request Machine no. 4397 Year of manufacture: 1998 Center height: 160mm Center width: 650mm Spindle passage: Ø 40mm Spindle speed: 20-3000 rpm stepless Tailstock taper holder: MK3 Quill stroke: 85mm Feed range longitudinal slide: 0.020 - 0.630 mm/rev Feed range cross slide: 0.006 - 0.200 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Csdpfsq H D U Eex Ailjgw Weight: approx. 720kg Further equipment and accessories: 3-axis digital display, coolant device, chuck protection, jaw chuck and other accessories on request... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: new, Year of construction: 2026, spindle bore: 38 mm, turning diameter: 330 mm, turning length: 750 mm, total length: 1,330 mm, total width: 750 mm, total height: 700 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 60 rpm, overall weight: 320 kg, Universal Lathe 330 × 750 mm The machine is designed for machining workpieces, most commonly with surfaces of rotational solids (shafts, cones, spheres, internal and external threads). The machining tool is usually a turning tool, drill, or threading tools. Thanks to modern solutions and equipment, the lathe is perfectly suited for professional and industrial work. Equipment 3-jaw chuck 160 mm Coolant system Dead center MT3 Cedpfx Asyvfzqsilogw Lathe stand Change gears for thread cutting Work light Optional equipment 2-axis digital readout (DRO) Technical Specifications Turning diameter over bed – 330 mm Maximum workpiece length – 750 mm Maximum turning diameter over cross slide – 220 mm Chuck – 160 mm Spindle bore – 38 mm Spindle taper – MT5 Number of metric thread types – 20 Metric thread range – 0.5 – 4 mm Inch thread range – 9 – 40 T.P.I. Longitudinal feed – 0.135 – 1.80 mm/rev Tailstock quill travel – 70 mm Tailstock taper – Morse 3 Number of spindle speeds – 12 Spindle speed range – 60 – 1650 rpm Motor – 1.1 kW Dimensions (L × W × H) – 1330 × 750 × 700 mm Weight – 320 kg Delivery to the customer is possible. Delivery cost is determined individually according to the transport company quotation. If you are interested in other machines, please visit our website.

Condition: excellent (used), Conventional lathe Inv. no. 3506 Ayel-Tech Model BT 400 * Turning length: 1000 mm Cgsdpfx Asxp Idgeiljw * Swing diameter: 400 mm * Spindle bore: 52 mm!!! * Spindle speed: 70 - 2000 rpm * 3-axis digital readout SINO * Foot brake * Coolant system * Machine lamp * Safety cover * Fixed steady rest * Follow rest * 3-jaw chuck * 4-jaw chuck * Emergency stop * Change gears * Chip guard/rear panel * Documentation * 400V

Condition: new, turning diameter over bed 400 mm turning diameter over slide rest 280 mm turning length 1000 mm turning speeds 70 - 2000 U/min centre height 195 mm spindle bore 54 mm tailstock quill taper MT 3 MK connected load frequency 400 V total power requirement 2,2 kW weight of the machine ca. 0.85 t dimensions of the machine ca. 1,95 x 1,0 x 1,75 m Professional industrial machine 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Codpfsp U Ut Asx Ailsgw Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, Equipment: rotational speed infinitely variable, H. Ernault.Somua lathe CE certification Cholet 550 model Newall DP 700 2-axis digital read-out system Completely retrofitted in 2020 Cgodpfx Aezb In Rjilow Reference: E038