Used Weiler Primus 2 for sale (199)

Condition: used, turning length 800 mm turning diameter 280 mm Dkodpfoxacg Rex Albet turning diameter over slide rest 150 mm spindle bore 42.0 mm tailstock quill taper MT 3 MK bed width 208 mm turning speeds 42 - 2022 U/min spindle taper DIN 55027/5 quill stroke 90.0 mm voltage 380 V total power requirement 3.0 kW weight of the machine ca. 750 kg range L-W-H 1800 x 800 x 1250 mm Due to its design (type, performance, feed rates, etc.) it can be used successfully in training workshops, but also for toolmaking and repair shops. Equipment: - robust conventional lead/spindle lathe - WMW 3-jaw chuck Ø 150 mm - faceplate 280 mm - MULTIFIX quick-change holder, with insert - movable tailstock - chuck key - machine base with storage area - pole-changing drive motor - operating instructions

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min Dodpfx Aljxaccxjbekt total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - collet holder with lots of collets - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 2,500 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 1,100 mm, overall weight: 3,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2007. This Weiler E55X1000 features maximum turning diameter of 315 mm and a a center distance of 1100 / 2100 mm. It is equipped with a Sauter 8-fold tool system and a spindle speed range of 1 – 2500 rpm. If you are looking to get high-quality turning capabilities, consider the Weiler E55X1000 machine we have for sale. Contact us for further details regarding this machine. • Internal taper: Metric 90 • Spindle diameter in front bearing: 120 mm • Spindle bore: 83 mm • Flange diameter: 500 mm • Maximum turning diameter: 315 mm • Maximum torque: 1600 Nm • Tool system: Sauter 8-fold • Number of tool positions: 8 • Tool shank size: 32 x 25 mm • Turret interface: Capto C4 • Number of face slides: 1 • Center distance: 1100 / 2100 mm • Turning length: 340 mm • Tailstock taper: MK 5 • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Maximum tailstock travel: 1000 / 2000 mm • Continuous duty speeds (S1):Gear stage I: 89 rpmGear stage II: 355 rpm • Emission level: 80 dB(A) • Operating voltage: 400 V Dodsy Em A Aspfx Albjkt • Control voltage: DC 24 V • Connected load: 30 kVA • Nominal current: 43 A • Frequency: 50 Hz • Main fuses: 50 A • Condition note: Ball screw in Z axis makes noise, but dimensional accuracy is not affected Additional equipment • Extraction system Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 4397, Ladies and Gentlemen, We are selling a Weiler Praktikant 160 AC lathe built in 1998 with original Weiler 3-axis digital readout. This newer version "AC" stands out above all due to the infinitely variable speed control, which makes working on the otherwise very user-friendly machine even easier. The machine has been extensively overhauled in our workshop so that it is technically and visually in excellent condition. All guides are in good order, the gears run quietly and the levers are easy to operate. You are welcome to visit us on site to see the condition for yourself. Availability: on request Machine no. 4397 Year of manufacture: 1998 Center height: 160mm Center width: 650mm Spindle passage: Ø 40mm Spindle speed: 20-3000 rpm stepless Tailstock taper holder: MK3 Quill stroke: 85mm Feed range longitudinal slide: 0.020 - 0.630 mm/rev Feed range cross slide: 0.006 - 0.200 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Weight: approx. 720kg Further equipment and accessories: 3-axis digital display, coolant device, chuck protection, jaw chuck and other accessories on request... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice Dkedpfx Asq H D U Eelbst - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: good (used), functionality: fully functional, used 6-position turret tool changer for Weiler 260 Djdpfx Aszu Tf Tjlbokt

Condition: excellent (used), Year of construction: 1997, CNC Lathe Weiler E 50/1, 1997 Technical specifications: Dkedpsymdw Sofx Albet Manufacturer: WEILER Model: E 50/1 Year of manufacture: 1997 Centre height: 280 mm Centre distance: 1000 mm Max. turning diameter: 500 mm Swing diameter over bed: 570 mm Swing diameter over cross slide: 340 mm Spindle speeds: 0 - 2500 rpm Chuck

Condition: used, Year of construction: 1995, turning diameter 720 mm turning length 3000 mm control Siemens 805 turning diameter over slide 430 mm turning speeds 1800 U/min tailstock quill taper MT 6 Dkedpfxoyqvbds Albot steady 3 Stück main drive motor 36 kW z-axis 3050 mm x-axis 410 mm swing diameter over slide rest 430 mm spindle motor 28 kW workpiece weight 3000 kg spindle passage 106 mm 3-jaw-chuck diameter 305 mm total power requirement . kW weight of the machine ca. 6 t dimensions of the machine ca. 4x2,4x2 m Steady rest 1: Diameter: 120-300 mm Steady rest 2: Diameter: 220-400 mm Steady rest 3: Diameter: 350-500 mm Chuck: Diameter: 315 mm Maximum workpiece weight: 3 t (with steady rest) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 1998, turning diameter 570 mm Dkjdey D T Uvopfx Albjt turning length 1000 mm control Siemens / Weiler D2 weight of the machine ca. 3,2 t dimensions of the machine ca. 3,0 x 2,0 x 1,9 m

Condition: good (used), Year of construction: 1991, Machine type Lathe - cycle-controlled Dkodper Dvqzefx Albot Manufacturer WEILER Type E30 year of construction 1991 Control Weiler Country of origin Germany Additional information Cycle-controlled lathe WEILER - E30 Technical details Turning diameter max. 330 mm Turning length 750 mm Weiler control Center height 165 mm Swing diameter over bed 330 mm Max. turning diameter over facing slide 160 mm Face slide travel 180 mm Longitudinal bed slide travel 395 mm Main spindle: Speed range - main spindle 1 - 4,500 min/-1 Drive power - main spindle 9 / 11 kW Max. Torque 165 Nm Spindle head DIN 55027 / 5 Spindle diameter in front bearing 70 mm Spindle bore 40 mm Usable bar diameter ( - ) mm Tool holder: Type MultiFix Turning tool shank cross-section 20 x 20 mm Tailstock: Quill stroke 110 mm Quill diameter 50 mm Tailstock holder MK 3 Feed rates: Rapid traverse max. 10 m/min Feed force 6 / 3 kN Feed range 0 - 20 mm/-1 Thread cutting: metric 0.1 - 400 mm Inch 1/4 - 56 G/1" Module 0.125 - 28 mm.II DP 1 - 224 G/".II Number of threads max. 50 Total power requirement 10 kVA Machine weight approx. 1.5 t Space requirement approx. 2.8 x 2.0 x 2.0 m

Condition: excellent (used), Year of construction: 1998, turning diameter 410/ 440 mm turning length 950 mm control Siemens / Weiler D2 workpiece weight max 900 kg spindle head Gr 6 MK 6 Djdpsyrh Apofx Albekt spindle bore 54 mm face stroke 230 dia. of quill MK 4 mm quill stroke 120 mm centre height 200 mm thread pitch max. in mm 0,1 - 250 mm spindle turning speed - stepless 1 - 3000 U/min total power requirement 12 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,3 x 1,5 x 1,8 m

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, center height: 165 mm, center width: 750 mm, Dear Sir or Madam, For sale is a Weiler Condor B lathe. This model is particularly notable for its very user-friendly operation and an excellent space-to-center height/center distance ratio. The Condor B is sized between the Weiler Praktikant and the Weiler Commodor, making it a genuine all-rounder for any workshop. The machine undergoes a thorough partial overhaul in our shop to ensure it is in excellent technical and visual condition. All guideways are in good order, the gearboxes run quietly, and all levers are easy to operate. You are welcome to inspect the machine on-site to verify its condition yourself. Availability: on request Dkjdpew N Np Ssfx Albot Center height: 165 mm Center distance: 750 mm Spindle bore: Ø 40 mm Tailstock taper: MT3 Chuck mounting: short taper DIN 55027 size 5 with bayonet lock Quill travel: 85 mm Spindle speeds: 22–2800 rpm Thread types possible: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.18–28 mm Spindle brake: switchable Voltage: 400V Dimensions: approx. 1.80 x 1.30 x 0.9 m (LxHxW) Weight: approx. 1100 kg Further equipment and accessories: 3-axis digital readout K+C (NEW), chuck guard (NEW), coolant system, 2x emergency stop, leadscrew and feed shaft cover (optional), operating manual, and much more on request... Our service commitment to you: - We are a certified master machine engineering business - All machines are at least workshop-tested - All lubricants and any worn components are replaced prior to sale - On request, we offer complete or partial overhaul of your selected machine - On request, we can repaint your chosen machine in any color you wish - Additional accessories such as tooling can be ordered with the machine upon request - On request, we can also install further accessories such as safety devices - We are happy to handle shipping and/or on-site installation for you

Year of construction: 1977, condition: used, Weiler Matador lathe year ca.1977 , three-jaw chuck , Multifix. Machine in a ready to use condition , By arrangement under power ready for demonstration. Dedpfjnkad Sox Albekt

Condition: used, Year of construction: 2000, used CONDOR AC, partially overhauled Dedox E Um Njpfx Albekt Centre height: 165 mm Between centres: 750 mm Spindle bore: 40 mm Spindle speeds: 22–2,800 rpm, infinitely variable - Quick-change tool post size B - WEILER DZ-V digital readout - Hollow spindle stop - Fixed steady rest - 7 Multifix tool holders - Flat splash guard - Electrically interlocked chuck guard - Change gears and various soft jaws The machine is partially overhauled: - Bed slide: guideways re-coated and hand-scraped, gibs and lower guide strips adjusted - Cross slide measured and aligned on bed slide; cross slide dovetail guide newly scraped, gibs adjusted and scraped - Top slide newly scraped and gib matched - All measuring scales overhauled and cables replaced The machine is located in our showroom at 71334 Waiblingen-Beinstein and is immediately available. For details on equipment, please contact us.

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 2,500 rpm, total height: 1,785 mm, overall weight: 3,850 kg, number of axes: 2, This Weiler E50 was manufactured in 2009. A robust horizontal turning machine featuring a swing diameter over bed of 570 mm and a spindle bore of 83 mm. It offers a bed width of 350 mm and a turning tool cross-section of 32 x 25 mm. Ideal for precise and efficient turning operations. Contact us for more information about this machine. Dodpfxoznz Txs Albskt Machine Benefits Qualitative Machine Benefits • Spindle diameter in the front bearing: 120 mm • Spindle bore: 83 mm • Inner taper of the main spindle: metric 90 • Feed range longitudinal and planar: 0-20 mm/rev • Feed force longitudinal: 10000 n • Feed force planar: 7000 n • Input speed longitudinal/planar: 10/7 m/min or 5/3. 5 m/min • Metric threads: 0. 1-400 mm • Inch threads: 1/4" - 56 g/1" • Module threads: Technical Machine Benefits • Drive power (60% / 100% ed): 20/17 kw • Max. Torque at the turning spindle: 1600 nm • Gear stage i: 1-625 min-¹ • Gear stage ii: 4-2500 min-¹ • Bed width: 350 mm • Quill diameter: 80 mm • Quill stroke: 200 mm • Inner taper of the quill: mk 5 • Turning tool cross-section (height/width): 32 x 25 mm • Spindle head according to din 55027: size 8 Extra Information • Machine still under power • The machine has been working effectively in 1-shift operation since it was purchased • The footprint of the machine is 2.8m x 5.2m, the 2.8m already includes 600mm as a workstation • All manuals are available Optional equipment (extra charge): • The chuck incl. hard & several sets of soft jaws • Tailstock • Tools • Steady rest Dimensions Machine Depth 3250 mm

Condition: good (used), Year of construction: 1985, functionality: fully functional, turning diameter over cross slide: 160 mm, spindle bore: 36 mm, turning diameter: 300 mm, center height: 150 mm, center width: 500 mm, total length: 1,500 mm, total width: 800 mm, total height: 1,300 mm, spindle speed (max.): 3,550 rpm, spindle speed (min.): 15 rpm, overall weight: 1,000 kg, Conventional lathe, center high 150 mm, between centers 500 mm, bore Ø 36 mm, 18 speed 15 - 3550 rpm, motor 3 kw, equipement: collet device, coolant device, 3-jaws chuck, rotating pin, drill chuck, tool post RAPID with 5 toolholders, lamp, dimensions 150x80x130 cm, weight ca. 1000 kgs Dsdpfex Urmljx Albokt

Condition: excellent (used), Year of construction: 2001, Length:1200mm Width:800mm Height:1200mm Dkodpfx Ajx Tp Dxelbet Weight:290kg

Condition: good (used), Year of construction: 1992, Centre lathe WEILER Type: PRAKTIKANT 160 B, Year of manufacture 1992, equipped with 3-axis digital readout Heidenhain, 160 mm RÖHM chuck, Multifix B tool holder, tailstock with centre, collet clamping device with collets from 1 to 29.5 mm, coolant system. Turning diameter over bed: 320 mm Turning diameter over cross slide: 198 mm Turning length: 650 mm Spindle bore: 40 mm Spindle speed: 96 – 2500 rpm Further data see machine card. Dodpfey Rpr Rox Albokt Guideways are in good condition, machine documentation available.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, center width: 1,000 mm, turning diameter over bed slide: 570 mm, swing diameter over cross slide: 340 mm, center height: 280 mm, spindle speed (max.): 2,500 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle speed range: 0 – 2,500 rpm Swinging diameter: 500 mm Dsdpfx Aljzpxglobokt Diameter of rotation over bed: 570 mm Diameter of rotation over carriage: 340 mm Center height: 280 mm Distance between centers: 1,000 mm EQUIPMENT Accessories (see pictures)

Condition: excellent (used), Year of construction: 2020, Travelling steady rest for Weiler E 50, year 2020. In very good condition. Clamping range: 12 - 125 mm. Dkedjyfnwmopfx Albst

Condition: ready for operation (used), Year of construction: 1990, operating hours: 51,392 h, total height: 1,700 mm, overall weight: 1,300 kg, This Weiler E30 was manufactured in 1990. A robust horizontal turning machine featuring a spindle bore of 42mm and a swing diameter over bed of 330mm. It supports a wide range of thread cutting, from metric to DP thread, and includes a Multifix holder B. Ideal for detailed and versatile turning operations. Contact us for more information about this machine. Additional equipment • Multifix holder B mounted • Fixed steady rest (option) clamping range: 15-100 mm • Moving steady rest (option) clamping range: 10-85 mm • Collets ranging from 3- mm (increments of 0.5 mm) • Tailstock with an MK3 chuck Machine Benefits Technical Machine Benefits Dkedpfoyaimfsx Albst • Drive power 100% / 60% ed: 9/11 kw • Max. Torque on the turning spindle: 180 nm • Total speed range: 1-4500 min⁻¹ • Feed drive: three-phase ac feed drives • Feed range longitudinal: 0-20 mm/rev • Ellganggeschwindghell longitudinal/plan: 10/7. 5/5/3. 5 m/min • Quill diameter: 50 mm • Quill stroke: 110 mm • Inner taper of quill: mk 3 Extra Information Swing diameter over facing slide: 160 mm Bed width: 240 mm Sliding movement of the facing slide: 180 mm Bed slide guide length: 395 mm Turning tool cross-section (height/width): 20 x 20 mm Spindle head according to DIN 55027 Gr. 5 Spindle diameter in the front bearing: 70 mm Inner taper of the main spindle: Mk 5 Workpiece Metric thread range: 0.1 - 400 mm Inch thread range: G/1" 1/4 - 56 Module thread range: mm DP thread range: 1-224 G/" Number of threads max.: 50 Dimensions Machine Depth 1800 mm

Condition: excellent (used), functionality: fully functional, Provisur Weiler 878 grinder, 50hp model. Greta machine for burger, sausage, Petfood manufacturer. Can mince fresh or frozen flaked meat. Extended hopper. Dodpsx Av Ruefx Albskt

Condition: good (used), Year of construction: 1994, functionality: fully functional, turning diameter: 410 mm, spindle bore: 54 mm, rotational speed (max.): 3,000 rpm, total height: 1,800 mm, total length: 2,200 mm, total width: 1,500 mm, workpiece weight (max.): 700 kg, overall weight: 2,100 kg, For sale is a Weiler E35 lathe. The machine is in good condition and fully operational. Technical data: Year of manufacture: 1994 Control: Siemens Sinumerik 805 Centre height: 200 mm Between centres: 950 mm Max. turning diameter over bed: 410 mm Max. turning diameter over cross slide: 200 mm Max. spindle speed: 3,000 rpm Tool changer: Multifix Spindle bore: 54 mm Max. workpiece weight: 700 kg Dimensions (approx.): 2,200 x 1,500 x 1,800 mm Weight (approx.): 2,100 kg Transport and loading can be organized Europe-wide for an additional charge, upon request. Dkodsxu Ehgopfx Albot Prices are exclusive of VAT. Inspection possible by prior appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: used, Year of construction: 1986, turning diameter over bed:320 mm turning diameter over slide rest:198 mm turning length:650 mm total power requirement:2,2 kW weight of the machine ca.:650 kg dimensions of the machine ca.:1700x1000x1700 mm :3 - Achsen - Digitalanzeige :Ø 40 mm :96 - 2500 U/min :A 2 - 5 Dksdpfxjufud Dj Albjt :0,007 - 0,63 mm/U :metrisch 0,25 - 8 mm,Zoll 80 - 2 Gg/",Diametral - Pitch Gewinde 200 - 5 Dp,Modul 0,2 - 4 :MK 3 3-jaw chuck:160 mm mm :Typ B

Condition: used, machine/vehicle number: 1717, Used lead and feed screw lathe WEILER PRAKTIKANT Centre height: 140 mm Distance between centres: 500 mm Spindle bore: 36 mm Dkjdpfouqb Emsx Albst Spindle speeds: 42–2,000 rpm Equipped with RSF 3-axis digital readout, 1 pc 3-jaw chuck Ø160 mm, Chuck guard electrically interlocked, With Multifix toolpost size A with 3 holders Lever-operated collet device with 15 collets. The machine is located at our facility in 71334 Waiblingen-Beinstein and is immediately available. Viewing of the machine is possible by prior arrangement.

Condition: used, turning diameter over bed 370 mm turning diameter over slide rest 200 mm turning length 1000 mm centre height 185 mm spindle bore 56 mm tailstock quill taper MT 4 turning speeds 50 - 2000 U/min Dodpfxjxfwckj Albokt power capacity 4,0 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2,3 x 1,1 x 1,3 m Center lathe 200mm three-jaw chuck Size B Multifix tool post 3 Multifix tool holders Emergency stop device