Used Weiler Lz 300 for sale (183)

Condition: good (used), L&Z spindle lathe WEILER COMMODOR B from educational institution -GS identification -3-axis digital readout "NEW" -Centre height: 180 mm -Centre distance: 1000 mm -Spindle bore: 56 mm -Spindle speeds: 15 - 2000 rpm -Automatic longitudinal & cross feeds -Thread cutting: metric / imperial / module / diametral pitch -Electric chuck guard -2 x emergency stop -Multifix with insert -Four-jaw chuck - Röhm -Chip guard rear panel -Coolant system -Very well-maintained original condition Cgjdpfsyf U E Dox Ac Nen -Documentation Dimensions: LxWxH 2.3x1.2x1.7 m / Weight 1600 kg Errors and omissions excepted

Condition: excellent (used), turning diameter over bed 260 mm spindle passage 28 mm turning length 300 mm centre height 130 mm Cgjdpfx Acsycxk Se Non turning speeds 125 - 2800 U/min total power requirement 3 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,4 x 0,6 x 1,4 m

Condition: used, turning diameter 240 mm turning length 530 mm control Siemens 840D SL swing diameter 560 mm x-travel 207,5 mm z-travel 530 mm turning speeds 6000 U/min Cjdeycxibspfx Ac Nogn 12 Stk. total power requirement --- kW weight of the machine ca. 6,1 t

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 91-160-2498, Used WEILER PRAKTIKANT 160 lead and feed screw lathe Centre height: 160 mm Centre distance: 650 mm Spindle speeds approx. 48–2,500 rpm Spindle bore: 40.5 mm Leadscrew and feed shaft are covered. Scope of delivery: Including 3-axis digital readout from Heidenhain, chip guard back wall, lever collet system (without collets), 1 x faceplate Ø 250 mm, electrically interlocked chuck guard, machine lamp, Multifix size A quick-change toolpost with 4 holders, bed stop, cooling unit, and fixed steady rest. Cgjdpfxeyciw Aj Ac Njn The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible.

Condition: used, turning diameter over bed 370 mm turning diameter over slide rest 200 mm turning length 1000 mm centre height 185 mm spindle bore 56 mm Cgedpfsxfwcksx Ac Njn tailstock quill taper MT 4 turning speeds 50 - 2000 U/min power capacity 4,0 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2,3 x 1,1 x 1,3 m Center lathe 200mm three-jaw chuck Size B Multifix tool post 3 Multifix tool holders Emergency stop device

Condition: used, Year of construction: 2009, Technical details: turning diameter: 800 mm turning length: 4500 mm control: 840-3 Circulation diameter via slide valve: 510 mm Shift of the planing slide: 410 mm bed width: 480 mm spindle head: DIN 55027 Gr. 11 spindle bore: 106 mm speeds:: 1-1800 1/min diameter of quill: 115 mm Inner cone of the quill: MK 6 quill stroke: 225 mm total power requirement: 37/30 kW dimensions of the machine ca.: 6500 x 2500 x 1950 mm weight of the machine ca.: 8000 kg Equipped as follows: - 3-jaw chuck - 700 mm steel faceplate Cgedpfx Acsyb R Exe Njn - Drill stand - PARAT tool post - Chip conveyor - Dust extraction - Heavy-duty coolant pump - Spindle brake

Condition: used, Year of construction: 1997, - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 270 - Drive system: Teach-in - Centre height [mm]: 210 - Swing over bed [mm]: 420 - Distance between centres [mm]: 900 - Spindle bore [mm]: 55 - Min. spindle speed [rpm]: 4 - Max. spindle speed [rpm]: 3000 - Options: Digital readout - Type of digital readout: Weiler - Control: CNC Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Codpfx Aswnh I Ssc Njgn Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2008, Weiler DZ 40, year of manufacture 2008, Siemens 840 D control, travel X/Z 200/350 mm, turning diameter 180 mm, max. swing diameter 560 mm, Y axis +/- 25 mm, Q axis / programmable tailstock, Q axis travel 360 mm, Q axis measuring system rotary, tailstock MK 4, main spindle max. bar capacity 42 mm, spindle bore 52 mm, rapid traverse X/Z/Q 30/30/20 m/min, turret 16 stations – all driven, VDI 25, shank diameter 25 mm, driven tools up to 4,500 rpm, part catcher, accessories, driven tool holders, fixed holders. Cedpfjydvfpex Ac Negn

Condition: good (used), Year of construction: 2008, functionality: fully functional, CNC Lathe Weiler DZ 42 Year of manufacture: 2008 Control: Siemens 840D / Shopturn Manual loading up to D 220 mm Material passage: 42 mm Max. turning length: 450 mm Cgodpfx Aoyayc Doc Nsn Spindle speed: 6300 rpm Machining Turret with 16 driven tools X/Z/Y / C-axis Collet chuck

Condition: ready for operation (used), Two lead and feed screw lathes by Weiler are available. 1) Weiler Condor VS-2, distance between centers: 800mm, center height: 155mm, swing diameter over bed/cross slide: 330mm/160mm, speed: 2800rpm, machine dimensions X/Y/Z: approx. 1900mm/900mm/1500mm. 2) Weiler Praktikant M, distance between centers: 650mm, center height: 160mm, swing diameter over bed/cross slide: 320mm/175mm, machine dimensions X/Y/Z: approx. 1700mm/1000mm/1700mm, weight: approx. 700kg. Both machines show isolated individual functional limitations, but are operational. Documentation available. On-site inspection is possible. Codsydp Ahopfx Ac Negn

Condition: good (used), Year of construction: 1988, 1 used lead and feed screw lathe Make: Weiler Model: 160 B Year of manufacture: 1988 Technical specifications Centre distance: 650 mm Swing over bed: 320 mm Swing over cross slide: 192 mm Centre height: 160 mm Spindle bore: 40 mm Rated power: 2.4 / 3 kW Spindle speeds: 48 – 2500 rpm Dimensions: approx. L 2.20 x W 1.10 x H 1.40 m Weight: approx. 1 t Equipment Codpfjw Sdr Hsx Ac Nogn Heidenhain digital readout Multifix toolholder with various inserts 3-jaw chuck Emergency stop

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Weiler Praktikant VC Precision Centre Lathe Year of Construction 1999, 3-Axis Siemens Digital Display with AC Drive, Infinitely Variable Spindle Speed, CE Compliant!!!! Technical Data: - Year of manufacture: 1999, Machine No. 82 - Centre height: 160 mm - Distance between centres: 650 mm Cgjdpfoyapwdox Ac Nen - Spindle speeds: up to 4000 rpm, infinitely variable - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock Morse Taper MK 3 - Feed rates: 0.02 to 0.63 mm/rev - Cutting threads: Metric, Inch, Module and Diametral Pitch - Metric thread pitches: 0.25 to 8 mm - Weight: approx. 920 kg - Spindle brake, switchable - Machine dimensions approx.: 1.4 m x 1.55 m x 0.95 m, length 1.6 m Accessories and Features: - 3-axis Siemens digital readout - Quick collet chucking device for collets from 2 to 29 mm, in 1 mm increments - 160 mm 3-jaw chuck with 2 sets of jaws - Multifix size A with 3 tool holders - Electronic chip guard - Change gears - Machine feet - Splash guard About the Machine: Offered for sale is a Weiler Praktikant VC lead and feedscrew lathe from year of manufacture 1999, in very good condition. The control system, in combination with the precision centre lathe from Weiler, provides the following functions: graphical display of travel distance and direction, graphical representation of the scale system on the lathe, compensation for tool offset, zero point shifting for workpiece position compensation, radius/diameter switching, graphical display of the main spindle rotation, graphical display of the machine’s speed potentiometer position. A very fine lathe featuring an AC drive with infinitely variable spindle speed. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and is capable of producing surface finishes comparable to grinding. The digital readout makes operation even easier and more precise. Take the opportunity to inspect the machine under power on site and convince yourself of its condition.

Condition: ready for operation (used), functionality: fully functional, center height: 140 mm, spindle bore: 36 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 42 rpm, total height: 1,600 mm, total length: 1,800 mm, total width: 700 mm, 3 Phase 380V, 2 speed motor is running fine. Geared headstock, gears running in oil bath! 16 spindle speeds adjustable from 42 up to 2000 RPM. Power feed in both longitudinal and cross directions. Thread cutting possible. Heidenhain 2-axis DRO (digital readout). Tripo A quick change tool post. Röhm 160mm 3-jaw chuck. MT3 tailstock taper. Made in Germany. Distance between centers: 850mm Center height: 140mm Spindle bore: 36mm Cgodeyditajpfx Ac Non Overall dimensions: 180x70x160cm Includes all accessories as shown in pictures. Contact us for shipping options! € 4,250.00

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm turning length / mm Cgodpfxswgi Tme Ac Non

Condition: ready for operation (used), Year of construction: 1990, operating hours: 51,392 h, total height: 1,700 mm, overall weight: 1,300 kg, This Weiler E30 was manufactured in 1990. A robust horizontal turning machine featuring a spindle bore of 42mm and a swing diameter over bed of 330mm. It supports a wide range of thread cutting, from metric to DP thread, and includes a Multifix holder B. Ideal for detailed and versatile turning operations. Contact us for more information about this machine. Cjdpfxjyaimfs Ac Nogn Additional equipment • Multifix holder B mounted • Fixed steady rest (option) clamping range: 15-100 mm • Moving steady rest (option) clamping range: 10-85 mm • Collets ranging from 3- mm (increments of 0.5 mm) • Tailstock with an MK3 chuck Machine Benefits Technical Machine Benefits • Drive power 100% / 60% ed: 9/11 kw • Max. Torque on the turning spindle: 180 nm • Total speed range: 1-4500 min⁻¹ • Feed drive: three-phase ac feed drives • Feed range longitudinal: 0-20 mm/rev • Ellganggeschwindghell longitudinal/plan: 10/7. 5/5/3. 5 m/min • Quill diameter: 50 mm • Quill stroke: 110 mm • Inner taper of quill: mk 3 Extra Information Swing diameter over facing slide: 160 mm Bed width: 240 mm Sliding movement of the facing slide: 180 mm Bed slide guide length: 395 mm Turning tool cross-section (height/width): 20 x 20 mm Spindle head according to DIN 55027 Gr. 5 Spindle diameter in the front bearing: 70 mm Inner taper of the main spindle: Mk 5 Workpiece Metric thread range: 0.1 - 400 mm Inch thread range: G/1" 1/4 - 56 Module thread range: mm DP thread range: 1-224 G/" Number of threads max.: 50 Dimensions Machine Depth 1800 mm

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2581 Year of manufacture: 1984 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Cgjdpfx Aceyah Rvj Non Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MT 4 Motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle speeds via 12-step gearbox - 3-jaw scroll chuck AROWA Ø 200 mm (only one set of chuck jaws) - Multifix quick-change tool post, size B, with 3 tool holders - Automatic longitudinal and cross feed - Coolant system - Spindle brake - Emergency stop - Splash guard - Fixed steady rest Ø 160 mm - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1500 kg In very good condition

Condition: good (used), Year of construction: 2000, Ref. -No.: 10623 Manufacturer: WEILER Type: E90 x 4500 Year of construction: 2000 Type of control: CNC Control: SIEMENS D1 - Zyklen Storage location: Halberstadt Country of origin: Germany Bed width: 600 mm Turning Length: 4500 mm Swing Diameter Over Bed Slide: 900 mm Spindle Bore: 128 mm Max. Torque: 6000 Nm Feed Capacity - Z: 20000 kN Feed Capacity - X: 20000 kN Rapid Speed: 10/5 RPM Cgedpfx Aeyagiwjc Nsn Tailstock Quill Diameter: 140 mm Tailstock Quill Stroke: 300 mm Lathe tool dimensions: 32 x 25 mm Front bearing diameter: 178 mm Circumferential diameter over facing slide: 530 mm Spindle head according to DIN 55027 (size): Gr. 11 Tailstock inner cone: MK 6 / 140 Type Machine length: 6900 mm Machine width: 2600 mm Machine Height: 2150 mm Weight Of The Machine Ca.: 10,5 t

Condition: excellent (used), Year of construction: 2008, Incl. Schunk chuck Center height: 160 mm Center width: 650 mm Spindle bore: Ø 40 mm Tailstock taper mount: MT3 Quill stroke: 85 mm Possible thread types: metric, inch, module, diametrical pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.60 x 1.00 x 1.50 m (L x H x W) Cjdpfex Ux I Njx Ac Nsgn Weight: approx. 750 kg

Condition: reconditioned (used), Year of construction: 1995, CYCLE LATHE WEILER " E 35" With 2 axes Siemens Sinumerik 805 Year of construction: 1995 Spindle bore: 54 mm Center distance: 950 mm Rotation O over bed: 410 mm Speed range: 4 - 3000 rpm With the following accessories: PARAT tool holder with 8 pcs. inserts Chuck guard 3 Jaw chuck 0 200 mm Cgsdpfsuzyw Dsx Ac Nsn 4 jaw chucks 0 200 mm Fixed lynette 12 - 150 mm Chip collection tray Chip guard with lighting Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions

Condition: used, L + Z Lathe WEILER Type Condor 81 A Mach. No. 36553 Year of manufacture approx. 1985 Centre distance 750 mm Swing over bed 330 mm Centre height over bed 165 mm Swing over cross slide 180 mm Centre height over cross slide 90 mm Spindle bore 40 mm Chuck mounting: Short taper DIN 55027 size 5 Tailstock quill taper MK 3 Quill travel 110 mm Cgjdpfx Aok S Ht Aoc Non Spindle speed 45 - 2800 rpm, 16 steps Drive power 3 kW Power supply 400 Volt, 50 Hz - Spindle speed through 16 gear steps - 3-jaw chuck Ø 160 mm RÖHM with hard and soft jaws - Multifix quick-change tool post size B with 3 holders - Automatic longitudinal and cross feed - Electro-mechanical spindle brake - Emergency stop - Coolant tank with pump integrated in the machine base, without feed hose to working area - Hinged chuck guard - Splash guard - 1 live center - Electric diagram and operating manual Space requirements L x W x H 1850 x 950 x 1400 mm Weight 1100 kg Good condition

Condition: excellent (used), functionality: fully functional, Weiler Primus lathe in excellent condition. Can be inspected under power. Technical specifications: Centre distance: 450 mm Centre height: 120 mm Spindle bore: 23 mm Cgodpfx Aex Htf Hsc Nen Speed range: 30 – 3000 rpm Tailstock: MK 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1550 mm

Condition: excellent (used), Year of construction: 2001, Length:1200mm Width:800mm Csdpsx Tp Dxofx Ac Nsgn Height:1200mm Weight:290kg

Condition: good (used), functionality: fully functional, The lathe was tested with a 2.2kW 230V frequency converter and should be operated with 380V 3.0kW. (I only have a 230V connection in my workshop.) Infinitely variable speed. CVT transmission - stepless Swing diameter over bed: 330 mm Swing diameter over carriage: 170 mm Turning length: 800 mm Center height: 165 mm Spindle bore: 38 mm Speed ​​range: 24 - 2800 rpm Three-jaw chuck with internal and external jaws. Dimensions: approx. 1850 x 800 x 1700 mm Weight: approx. 870 kg Steady rest: up to 80 mm round Traveling steady rest: 65 mm round Cooling water pump: 230V 24V lamp connection Cgsdpfjyb Tx Usx Ac Nsn Interchangeable gear, splash guard, and second chuck flange.

Condition: like new (used), functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 1824 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feed rates from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW >> Bed stop >> Machine feet >> Coolant system Cgjdpfxjvrcqdj Ac Njn >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: covers for the guide. and feed spindle About the machine: A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. Even at high speeds, the Weiler runs very quietly. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: like new (used), functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 2020 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feeds from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametrical pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW >> Bed stop Cgedpfsvrckqex Ac Njn >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: covers for the guide. and feed spindle About the machine: A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. The Weiler runs very quietly even at high speeds. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.