Used Water Softening Plant for sale (10,373)

Condition: new, functionality: fully functional, power: 375.1 kW (509.99 HP), axle configuration: 4x4, fuel: diesel, emission class: euro6, Year of construction: 2025, Equipment: additional headlights, airbag, trailer coupling, From our immediately available new vehicle inventory, we offer you: TLF 4000 / All-wheel drive on a rugged MAN TGS 18.510 all-wheel drive chassis Here comes our MAN mountain lion! With its 510 hp and the rugged, single-tire all-wheel drive chassis, challenging terrain is its domain. This makes it ideally suited for steep inclines, adverse weather conditions, and areas far from any road. Chassis: Crsdpfx Ajxl Ab Sjiiei • MAN TGS 18.510 4x4 EURO 6 with 510 hp (375 kW) • Automatic transmission • Single tires for maximum off-road capability Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 PA mountings in the crew compartment Body: • High-quality body construction in a frame design made of rust- and corrosion-free material • 4 flexible and spacious equipment compartments per vehicle side • Swivel walls for maximum storage space • Fold-out steps for each side equipment compartment • Individually customized stainless steel equipment storage according to your requirements • Walkable, non-slip vehicle roof Vehicle pump/fire extinguishing agent tank: • Maintenance-free combined normal/high-pressure pump FPN 4000-10 • PUMP&ROLL capable • Output of more than 4,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, steplessly adjustable foam mixing system • Water tank 4,500 l with integrated foam tank 450 l • Additional heater in the pump room Firefighting equipment: • High-pressure quick attack system with 50 m of dimensionally stable hose • Remotely controlled foam/water monitor on the vehicle roof • Remotely controlled front monitor • Self-protection system with 4 extinguishing nozzles in front of the tires Safety and lighting • LED light bar on the vehicle roof / 2 LED front flashers • Additional blue light elements on the body • Pneumatic special signal system • Loudspeaker system 100 W with public address unit • Rear view camera • Comprehensive LED lighting in the crew compartment and all equipment compartments • LED ambient lighting on the body and additional spotlights • Pneumatic LED light mast with remote control • Hygiene board on request We would be happy to provide you with a detailed offer and show you the vehicle in detail at our location in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness and accuracy. This advertisement is not an offer, but rather information. Subject to prior sale!

Condition: reconditioned (used), Year of construction: 2019, operating hours: 5,144 h, functionality: fully functional, overall weight: 25,000 kg, total width: 2,550 mm, total length: 9,500 mm, total height: 3,400 mm, transport width: 2,550 mm, transport length: 10,000 mm, transport height: 3,400 mm, year of last overhaul: 2026, rotor diameter: 600 mm, rotational speed (max.): 30 rpm, Doppstadt DW 3060 Buffel – Type F – BioPower - Year of manufacture: 2019 - Operating hours: 5144 - Engine: MTU 6R 1300 (490 hp) - Weight: 25,000 kg - Number of teeth: 42 pcs. - Hydraulic self-propelled drive - Remote radio control Csdj Aarnzopfx Aiieri - Central lubrication system - Rear discharge conveyor (5.5 m) - Magnetic separator (overband type) - BioPower system – increased power and efficiency - 3-axle chassis - Working shaft: 3000 x 600 mm Machine has been refurbished and is available immediately.

Condition: excellent (used), For sale: a KSB ETABLOC-GN 65-160/1102.21 centrifugal pump, equipped with an 11 kW electric motor. The pump is used and in working order. It is in good technical condition and shows normal signs of use and storage. The exact visual condition can be seen in the photos. Pump technical specifications: Manufacturer: KSB Aktiengesellschaft Type: ETABLOC-GN 65-160/1102.21 Design: GN11 Ident-No.: 48861861 No.: 5-925-204038 / 1 Flow rate Q: 18–143 m³/h Head H: 35.5–22 m Rotational speed: 2900 rpm Motor technical specifications (50 Hz): Manufacturer: KSB Power: 11 kW Voltage: 380–660 / 420 V Current: 20.8–12.0 / 19.0 A Rotational speed: 2900 rpm cos φ: 0.92 Protection class: IP55 Insulation class: F Motor weight: approx. 79 kg Condition: Used, in working order. Normal signs of wear and tear resulting from previous use and the age of the equipment. Scope of sale: Crsdpfx Aioz Sn R Rjiei KSB ETABLOC-GN pump with electric motor – exactly as shown in the photos, in the presented condition and configuration.

Condition: excellent (used), For sale is an industrial KSB ETABLOC-GN 50-200/1502.21 centrifugal pump, equipped with a 15 kW KSB electric motor. Crsdpfez Sn Suex Aiioi The pump is designed for industrial applications, technological installations, water circulation systems, and other suitable media. Pump technical data: Manufacturer: KSB Aktiengesellschaft Type: ETABLOC-GN 50-200/1502.21 Identification number: 48861841 Flow rate Q: 12–100 m³/h Head H: 55–34.5 m Rotational speed: 2900 rpm Connections: flanged Motor data: Manufacturer: KSB Type: QUPA 160 M2B-6 Power: 15 kW / 50 Hz Voltage: 380–660–420 V Current: 27.8–16.1–25.2 A cos φ: 0.93 Protection class: IP55 Insulation class: F Motor weight: approx. 87 kg Condition: used, with normal signs of use and storage visible in the photos. A complete set consisting of the pump and electric motor is being sold, exactly as shown in the photos.

Condition: excellent (used), For sale is a Pumpen Distel type 50/200 centrifugal pump equipped with an 11 kW electric motor from Antriebstechnik G. Bauknecht AG. The pump is used and in working order. Visually, it is in good used condition and has normal signs of use and storage. The actual condition and completeness are shown in the photos. Technical data of the pump: Manufacturer: Pumpen Distel Type: 50/200 Serial No.: 78756 Flow rate Q: 40 m³/h Pressure: 4.5 bar Rotational speed: 2900 rpm Cjdpfx Aisz Sn Sbsisri Power: 11 kW Connections: flanged Technical data of the electric motor: Manufacturer: Antriebstechnik G. Bauknecht AG Type: RF 11/2-75 Power: 11 kW Voltage: 380 V Current: 22 A Frequency: 50 Hz Rotational speed: 2930 rpm cos φ: 0.88 Protection class: IP54 Insulation class: B Operating mode: S1 Mounting form: B3/B5 Condition: Used, in working order. Has normal signs of use and storage. Scope of sale: Complete centrifugal pump with an 11 kW electric motor – exactly as shown in the photos.

Condition: good (used), Pumpex water pump, 300 m³/h, 7.5 kW Credpfxoz Skzao Aiisi

Condition: excellent (used), For sale: a used KSB ETABLOC-GN 32-125/222 industrial centrifugal pump with a 2.2 kW electric motor. The pump has been inspected and is in full working order. It is in used condition, with normal signs of wear and tear, as well as some localized surface corrosion on the flanges and housing. The photos provide a detailed view of its condition. Pump technical data: Manufacturer: KSB Model: ETABLOC-GN 32-125/222 Design: GN11 Identification number: 48861776 Number: 5-925-204037/1 Capacity: 4–30 m³/h Cjdpfjz Snvmsx Aiiori Head: 25–18 m Rotational speed: 2900 rpm Approximate weight of the complete unit: 39.5 kg Motor data: Manufacturer: KSB Type: OU FA 90L2A-60 Power: 2.2 kW Power supply: three-phase Voltage: 220–240 / 380–420 V Frequency: 50 Hz Rotational speed: 2850 rpm Protection class: IP55 Insulation class: F cos φ: 0.89

Condition: excellent (used), For sale: a used Speck-Pumpen centrifugal pump, type 50/125, equipped with a three-phase Bauknecht electric motor, 4.0 kW. Cjdpoz Snuzefx Aiisri Pump specifications: Manufacturer: Speck-Pumpen Type: 50/125 Part No.: 69807 Manufactured in: West Germany Motor specifications: Manufacturer: Bauknecht Type: RF 4/2-76 No.: 3230192-2 Power: 4.0 kW Voltage: 380 V Current: 8.1 A Rotational speed: 2900 rpm Frequency: 50 Hz cos φ: 0.89 Protection class: IP44 Insulation class: B The pump has been inspected and is fully functional, ready for use.

Condition: new, For sale: a NEW, unused KSB ETABLOC-G 40-160/552.2 centrifugal pump with a 5.5 kW electric motor. The pump comes from warehouse stock. It is new and unused. The set includes the original KSB carton and operating manual. Pump technical data: Manufacturer: KSB Cjdpfjz Sn Aajx Aiijri Model: ETABLOC-G 40-160/552.2 Ident-No.: 48862664 Flow rate Q: 7.5–63 m³/h Head H: 35.8–24 m Pump speed: 2900 rpm Design: G11 Motor: Power: 5.5 kW Power supply: 3-phase Frequency: 50 Hz Voltage: 380–420 / 660–725 V Speed: 2880 rpm Protection class: IP55 Insulation class: F Condition: NEW / UNUSED – warehouse stock. The pump is in its original KSB packaging. The operating manual is included. The item for sale is exactly the one shown in the pictures.

Condition: excellent (used), For sale: an industrial centrifugal pump, KSB ETABLOC-GN 32-125.1/024.1, with a 0.25 kW electric motor. Cedpfx Aioz Snuvoisri Pump specifications: • Manufacturer: KSB • Model: ETABLOC-GN 32-125.1/024.1 • Design: GN • Pump number: 4-925-104322/2 • Flow rate: 6.0 m³/h • Head: 2.0 m • Pump speed: 960 rpm Motor specifications: • Motor number: 9870132-0090-0003 • Power: 0.25 kW / 0.34 HP • Power supply: three-phase • Voltage: 400/230 V • Frequency: 50 Hz • Speed: 890 rpm • Current: 0.85/1.49 A • cos φ: 0.73 • Protection class: IP54 • Insulation class: F • Duty cycle: S1 • Mounting method: IM B14

Condition: excellent (used), For sale is a vertical, multi-stage KSB Movitec V 4/16 B centrifugal pump with a 3 kW electric motor. The pump is in good visual condition. The unit also bears a service marking from ROCK Elektromotoren Reparaturwerk, indicating a previous inspection/service. Pump technical specifications: Manufacturer: KSB Model: Movitec V 4/16 B ID: Flow rate Q: 4.0 m³/h Crjdpfxez Sn Agj Aiioi Head H: 119.1 m Pump speed: 2920 rpm Connection: PN16 Hydraulics: PN40 Seal: SiC/Ca/EPDM Temperature range according to nameplate: up to +120°C Pump year of manufacture: 2012 Motor: Power: 3.0 kW 50 Hz: 2900 rpm Voltage: 400D / 690Y V Protection class: IP55 Insulation class: F Operating mode: S1 Motor weight: 27 kg The item offered for sale is exactly the one shown in the pictures.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Reverse Osmosis Plant for ethylene glycol recovery, with a 12 m³ raw-water storage and homogenisation tank, nominal feed flow rate of 4 m³/h at 4 bar and filter backwash flow rate of 11 m³/h at 1.5 bar. Includes an automatic downflow multimedia filter with anthracite and sand beds supported on gravel, designed to remove suspended particles and protect the membranes. Compact skid-mounted reverse osmosis unit with two-stage filtration using replaceable 20- and 5-micron cartridges, a variable-speed high-pressure pump and a two-stage (1+1) × 6 reverse osmosis membrane configuration. Equipped with 8-inch DOW spiral-wound aromatic polyamide membranes installed in GRP pressure vessels rated up to 1,000 psi. Nominal recovery rate: 90%, equivalent to a theoretical permeate production of approximately 3.6 m³/h under design conditions. Low- and high-pressure piping and interconnections manufactured from AISI 316L stainless steel. Includes recirculation, front and side permeate collection, a CIP chemical cleaning system, membrane flushing, a GRP solution-preparation tank, a 25-micron mesh microfilter and a delivery pump for cleaning solutions and permeate water. Automated control system based on a Siemens S7-200 PLC, providing measurement and control of flow rates, temperature, pressures, pressure drops, operating times, pumping, backwashing, flushing and process alarms. Operator panel with a 6-inch colour touchscreen for parameter display and configuration, start/stop control, filter washing, alarm monitoring and trend graphs. Includes a 2 m³ reverse osmosis reject-water tank for subsequent transfer to the evaporator. Serial No.: MPP51525. Crodpfx Aozvddcoiiei

Condition: new, functionality: fully functional, power: 377 kW (512.58 HP), fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE New Generation FULLSTAR Series Mobile Crushing, Screening and Washing Plants are the most preferred machines in recent years thanks to easy and cost free installation. The first crushing process is performed with Primery Jaw Crusher, we can design with secondary impact crusher or cone crusher for second crushing stage according to the requirements of our customers. Fullstar-60 plant has been projected for the first time in the world by Fabo and provides crushing, screening and as well as to wash 0-5 mm sand at the same time on a single chassis. Our FULLSTAR model operates in closed Crushing circuit system and allows user to obtain 4 different final fractions up to 300 T / S capacity. We are manufacturing Fullstar-90 and 110 models which has 3 functions at the same time by trailed-type 2 chassis with its own tires. FABO FULLSTAR-90 is a mobile type plant which perform crushing, washing and screening operations at the same time. This type of plant is very efficient as it is produced on a single chassis, which reduces both plant operation area and manufacture cost. TECHNICAL SPECIFICATIONS: - Model: Fullstar-90 - Production Capacity: 120-180 Tons Per Hour - 1st Crusher: Primary Jaw Crusher – 900x650mm - 2nd Crusher: Secondary Impact Crusher – Rotor Ø1250x1000 mm - Maximum Feeding Size: 600 mm - Vibrating Screen Size and Deck: 1st Chassis: 1700x4500 mm : 2nd Chassis: 1550x4000 mm(Grizzly) ¬- Screw Washer Size: 600x5000 mm (Twins Helix) - Total Motor Power: 377 Kw - Generator (optional): 450 kvA Crsdpfxszvfk Do Aiiji - Plant Dimensions: 1st Chassis: 18960 x 4070 x 4650mm : 2nd Chassis: 15500 x 4650 x 4400mm FULLSTAR-90 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder(Bypass) • Primary Jaw Crusher • Secondary Impact Crusher • High Stroke Type Vibrating Screen • Screw Sand Washer (Single Helix) • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2023, functionality: fully functional, feed rate X-axis: 6 m/min, working width: 1,300 mm, total length: 4,885 mm, total height: 2,400 mm, total width: 3,780 mm, type of input current: three-phase, working height: 900 mm, input voltage: 380 V, input frequency: 50 Hz, energy consumption: 17 kWh, warranty duration: 12 months, DIMENSIONS OF PAINTED COMPONENTS The line will ensure good qualitative results under all operating conditions, provided that components with incorrect parameters are eliminated at the beginning, such as: • Bent, warped components; • Components with defects that would render them unsuitable for use even after painting. • Maximum length 2500 mm • Minimum length 350 mm • Maximum width 1300 mm • Minimum width 50 mm • Maximum thickness 60 mm • Minimum thickness 5 mm • Maximum deflection 10 mm • Average temperature 15-35 °C • Minimum temperature -5 °C • Relative humidity % • Operating speed 2 [2-3] m/min • Operating height 900 mm MATERIAL • Wood and wood-based materials END PRODUCT • Furniture • Outdoor furniture SHAPE • Shaped components TYPES OF PAINTS • Solvent-based paints Codpfx Ajzq Axzeiiori • Water-based paints FINISH • Transparent • Matte (< 25) • Pigmented • Semi-matte (30-40) MITO B2: MITO B2 SPRAYING AUTOMAT Spraying automat with 2 arms, dry air filtration system, and conveyor belt. Machine designed for continuous coating of various types of profiled panels. Spraying in continuous mode on any type of panel. No paint mist on the underside of the panels thanks to the 1650 mm conveyor belt. Robust machine construction. Excellent access to the interior through glazed areas, access doors, and retractable parts. Components are transported by a CFB belt transport system with a sealed edge, driven by a motor with a frequency inverter. The outer side of the belt is located outside the cabin to allow vapor containment. The axis is driven by a brushless motor and a toothed belt, ball bearings. Guarantees the best feed, acceleration and deceleration parameters, allowing for maximum coating quality. New and patented PLENUM (patented air diffusion system). Thanks to flow studies, better paint management (savings), better machine cleaning, and better coating quality are achieved. Unique management of component transport with precise speed control prevents soiling of the lower part of the components during acceleration/deceleration. Control electrical cabinet, located at the machine entrance on the service side, with electrical installation and connection channel to the machine. Wide, robust and efficient double-zone with a filter section. Flow regulated by a frequency inverter. Tanks with supports for Columbus filters Fire-resistant ATEX cat. 2G exhaust fan HCD type belt cleaning and paint recovery system. Perfect belt cleaning, maximum paint recovery ensured by the patented system from Cefla and the CFB belt with sealed edges. Cleaning system motor with inverter 1.50 kW. Easy access system, components removable from the front, ergonomic layout. Color and product change in seconds (including a spare set). 2 opposite arms with fixed holders for 4 guns, manual height adjustment. Spraying equipment (pumps, guns) and adaptations are not included in the offer. 2 paint feed circuits with element recirculation and paint filters. Stainless steel fittings.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 844, PLEASE READ THE DESCRIPTION CAREFULLY Used IPF25 filling machine with integrated weigher for filling paper open-mouth bags, including bags with handles. The machine is suitable for processing a variety of bulk products, such as: Cat litter Pet food Charcoal Wood pellets Other dry bulk materials .... Bag dimensions: Width: 150 to 300 mm Length: 300 to 600 mm Side gusset: 35 to 85 mm The machine is currently in our workshop and is undergoing refurbishment. The refurbishment work will be carried out in stages. If you are seriously interested, we can expedite this process so that the machine becomes available sooner. Codpfezrvldex Aiieri Please feel free to contact us for additional information or to arrange a viewing.

Condition: excellent (used), Year of construction: 2008, operating hours: 84,000 h, functionality: fully functional, power: 526 kW (715.16 HP), type of cooling: air, input frequency: 50 Hz, Jenbacher J312GS hours: 84,000 hours overhaul at 60,000 hours. Cjdpfx Aozwpnpsiieri Year: 2008 Rated power: 526KW Frequency: 50HZ Very well looked after unit was installed in a hospital and serviced and maintained regularly.

Condition: used, IKA LR 2000 V Laboratory Reactor For sale is a professional, modular IKA LR 2000 V laboratory reactor system in ready-to-use condition. This configuration is the ideal workhorse for product development, simulation, and small-scale production (e.g., in the fields of cosmetics, pharmaceuticals, chemistry, or food technology). Thanks to its vacuum compatibility and the combination of an anchor stirrer and a high-performance disperser, the system is perfectly suited for the production of stable emulsions, creams, and lotions. Here you will receive a complete, ready-to-use system. Cjdpfxsz I Szwj Aiiori The expensive double-walled glass vessel with bottom outlet, the heating bath with temperature sensor, and the Ultra-Turrax T25 including shaft are already included in the package. You save yourself the tedious and costly individual purchases, which would amount to thousands of euros! Scope of delivery & technical components: Reactor vessel: Double-walled 2.0-liter vessel made of high-quality borosilicate glass 3.3. The jacket allows for precise heating and cooling via external thermostats. Equipped with a practical bottom outlet valve for clean emptying. Mixing tools: Integrated anchor stirrer for optimal wall scraping with viscous masses, as well as a suitable flow breaker to prevent vortex formation and for perfect vertical mixing. Dispersing device: IKA ULTRA-TURRAX T25 including matching dispersing shaft. Enables highly effective homogenization and size reduction directly during reactor operation. Drive & control: Robust IKA control unit RE 162 P for powerful stirring even at low speeds. Temperature control: Water bath LT5 control including external temperature sensor. The sensor measures the temperature directly inside the reactor medium, which enables highly precise control via the water bath. Accessories: Complete stand system for the secure mounting of all components as well as all necessary holders. Note: The sale is without control software. The system can be fully, independently, and easily controlled directly via the hardware controls. "Everything from one source: We will gladly offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs on request!

Year of construction: 2021, condition: used, Removes oil from your compressor condensate The Alup OWS 18 collects the condensate from a screw compressor, dryer or receiver and separates out the oil. The water that is left can then usually go straight into the drain, so you do not have to have oily condensate taken away. The separator was built in 2021, weighs 6.8 kg empty and is compact enough to sit next to the compressor. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Oil-water separator for compressor condensate Filtration: Oil filter and activated carbon filter Weight: 6.8 kg (empty) Crjdjz Ndazopfx Aiiei

Condition: used, Year of construction: 2007, operating hours: 66,031 h, functionality: fully functional, type of input current: three-phase, power: 800 kW (1,087.70 HP), input voltage: 400 V, type of cooling: water, input frequency: 50 Hz, input current: 80 A, MWM / Deutz TCG 2016 V16 CHP Unit – Approx. 800 kWe – Natural Gas For sale: complete MWM / Deutz TCG 2016 V16 CHP unit, year 2007, suitable for operation on natural gas. The unit has approximately 66,031 operating hours. The last major service was performed at approximately 48,000 operating hours. The CHP unit will only be sold after the engine overhaul has been completed. Work included before delivery Prior to delivery, the following work will be carried out: - Complete overhaul of the MWM TCG 2016 V16 engine - Overhaul of the electric pumps - Cleaning of the exhaust gas cooler - Cleaning of the condenser The generator was tested while the unit was still in operation and was found to be in good working order. The unit is currently disconnected from the gas supply. The oil and cooling water have been drained in preparation for the overhaul, so the engine and complete CHP unit can no longer be demonstrated running in its current condition. Main specifications - Manufacturer: MWM / Deutz - Model: TCG 2016 V16 - Year: 2007 - Fuel: Natural gas - Electrical output: approx. 800 kWe - Generator: Marelli - Generator rating: 1,300 kVA - Grid frequency: 50 Hz - Control system: TEM Evolution - Operating hours: approx. 66,031 h - Last major service: approx. 48,000 h Scope of supply The unit is offered as a complete CHP package and includes: - MWM / Deutz TCG 2016 V16 gas engine - Marelli generator Crjdez E A Rwepfx Aiiji - TEM Evolution control system - Gas train - Generator switchgear - Heat recovery equipment - Exhaust gas cooler - Condenser - Associated installation components supplied with the unit The unit is suitable for grid-parallel operation and can also be prepared for island / stand-alone operation if required. Complete service and technical documentation A complete maintenance history is available, including: - Full service logbook - Maintenance records - Oil sample reports - Electrical schematics - P&ID drawings - Technical and maintenance documentation Technical performance data for this engine type is also available, including information on electrical efficiency, gas consumption, thermal output, and total CHP efficiency. Installation and commissioning available In addition to supplying the CHP unit, CHP Solutions can also provide installation and commissioning on site. Depending on the project requirements, we can offer support with: - Positioning and installation of the CHP unit - Mechanical installation - Electrical installation - Gas connection - Cooling and heat-recovery connections - Grid connection - Start-up - Commissioning - Preparation for grid-parallel or island operation This means the CHP can be supplied not only as a unit, but also as part of a complete installed and commissioned energy solution. The unit is located in the Netherlands and can be inspected by appointment. For further technical information, documentation, photos, installation options, or a complete project quotation, please contact CHP Solutions.

Condition: new, functionality: fully functional, fuel type: diesel, overall weight: 16,500 kg, Year of construction: 2026, Throughput capacity: up to 200 t/h Screen box: 2,743 x 1,220 mm Screen decks: 2 Screen angle: 14° Feed hopper capacity: 5 m³ Drive: diesel-hydraulic Discharge height, final discharge conveyor: 3,430 mm Discharge height, fine fraction discharge conveyor: 3,145 mm Discharge height, medium fraction conveyor: 3,145 mm Weight (without options): 16,500 kg Cjdpfjz Nhvuex Aiiori Transport dimensions: 9,880 x 2,550 x 3,190 mm Throughput capacity: up to 200 t/h Screen box: 2,743 x 1,220 mm Proven quality. High throughput. Robust design. Worldwide support: service and spare parts support worldwide.

Condition: ready for operation (used), Year of construction: 2020, overall weight: 564 kg, fuel type: electric, total length: 2,346 mm, total width: 1,285 mm, total height: 1,747 mm, cooling capacity: 25 kW (33.99 HP), heating capacity: 50 kW (67.98 HP), type of cooling: water, 2 Chilled Water Production Units Reversible – Variable power output: 25 or 50 kW Equipped with transport chassis Never used – Available for immediate delivery Credpez Rvr Hjfx Aiioi For sale individually, two identical units available.

Condition: new, Corona DP 405 multi-jet contact water meter with pulse transmitter Cjdpfx Aisz Rv Hweieri New multi-jet turbine water meter in a fully dry-running design with an integrated contact transmitter for remote transmission of flow rates and for proportional control of pumps and motors. Manufacturer: Corona Type: DP 405 Device type: Multi-jet contact water meter Measuring principle: Multi-jet turbine meter Design: Fully dry-running with magnetic coupling Pulse transmitter: Encapsulated reed contact (normally open) Contact transmitter: Waterproof encapsulated, replaceable Cable length of contact transmitter: 2 m Maximum contact voltage: 24 V Maximum contact current: 0.2 A Nominal pressure: PN 16 Medium temperature range: +1 to +30 °C Temperature resistance: +1 to +90 °C Storage temperature: +1 to +55 °C Degree of protection: IP65 Totalizer: Rotatable Condition: New Quantity: 1

Condition: used, Universal water temperature control unit with electric heating and connections for external cooling. Pressurized water temperature control unit, circulating process temperature control, heater, cooler, electric heating. SINGLE type STW 180/1-36-100-S Mfg. No.: 130568 Year of manufacture: 2013 Temperature max. 180°C Temperature range +20°C to 180°C Operating overpressure max. 6 bar Pump capacity 100 l/min. Tank volume approx. 22 liters (internal volume) Heating capacity 36 kW - direct injection cooling Pump motor power 1.1 kW Heat transfer medium water Circulating water supply + return DN 32 - G 1 1/4" Cooling water supply DN 20 G 3/4" Cooling water return DN 20 G 3/4" Connection power 41 kVA Cedpjz N H D Dsfx Aiiori Rated current 57 A Control system SC Standard type R8200-S-1-SI1-0-6 Mains connection 400 Volt, 50 Hz. - Temperature control - An external cooling unit or an external cooling circuit is required for cooling (cooling is achieved through direct injection of cooling water into the cooling medium without a heat exchanger). - mobile on 4 rollers - Supplied without connection cable Dimensions L x W x H 1300 x 370 x 1150 mm Weight 200 kg Good condition

Condition: excellent (used), mileage: 425,359 km, power: 265 kW (360.30 HP), first registration: 01/2001, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: red, driver cabin: day cab, gearing type: mechanical, suspension: steel-air, total length: 9,700 mm, total width: 2,530 mm, total height: 3,030 mm, = Additional options and accessories = - PTO = Notes = BELGIAN TRUCK, EX-FIRE DEPARTMENT VEHICLE 8000 LITER STAINLESS STEEL WATER TANK + MP10-1000 BRICK PUMP, 2003 EXCELLENT CONDITION = Additional information = General information Year of construction: 2001 Technical information Number of cylinders: 6 Axle configuration Front axle: Steerable; Suspension: Leaf spring suspension Rear axle 1: Twin tires; Suspension: Air suspension Rear axle 2: Lift axle; Suspension: Air suspension Weights Unladen weight: 11,485 kg Payload: 14,515 kg GVW: 26,000 kg Maintenance, history, and condition APK (Technical Inspection): Valid until 07.2027 Technical condition: very good Credpfxezdlp As Aiioi Visual condition: very good Additional information Please contact Thierry Leemans for further information.

Year of construction: 2020, condition: used, This listing is for Puro-i III | RO Water Purification System The unit is in full working condition and ready for immediate use The Avidity Science Puro-i III is an integrated reverse osmosis water purification system designed to produce Type III laboratory water directly from potable tap water. Depending on configuration, the system provides production rates from 5 to 30 L/hr, with dispensing at up to 2 L/min. Features include twin-pass RO technology, automatic RO sanitisation and an interactive touchscreen interface. Typical specifications include Type III water production, up to 99% inorganic rejection and feed-water pressure of approximately 0.5–6 bar. Available configurations include different production rates, reservoir conductivity monitoring and loop options Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a Cjdpfxsz D H D Ej Aiiori courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.