Used Water Softening Plant for sale (10,373)

Condition: new, Year of construction: 2026, Available in stock Advantages: Universal assembly system. Pump system with the built-in filter for filling in/out the tank with bitumen emulsion. Built-in heating system (gas propane burner). BS-500 can be mounted on a trailer or transport vehicle like a pick-up. Asphalt Sprayer BS-500: Power block (Petrol Engine HONDA GX-160, air-cooled - 3.6 kW). Engine power – 3.6 kW. Fuel gasoline. Hand spraying rod length – 4 m. Spraying bar length – 7 nozzles. Emulsion tank – 500 l. Croded Swg Hopfx Aiiei Warranty – 1 year.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 5,144 h, functionality: fully functional, overall weight: 25,000 kg, total width: 2,550 mm, total length: 9,500 mm, total height: 3,400 mm, transport width: 2,550 mm, transport length: 10,000 mm, transport height: 3,400 mm, year of last overhaul: 2026, rotor diameter: 600 mm, rotational speed (max.): 30 rpm, Doppstadt DW 3060 Buffel – Type F – BioPower - Year of manufacture: 2019 - Operating hours: 5144 - Engine: MTU 6R 1300 (490 hp) - Weight: 25,000 kg - Number of teeth: 42 pcs. - Hydraulic self-propelled drive - Remote radio control - Central lubrication system - Rear discharge conveyor (5.5 m) Crjdps Aarnzofx Aiioi - Magnetic separator (overband type) - BioPower system – increased power and efficiency - 3-axle chassis - Working shaft: 3000 x 600 mm Machine has been refurbished and is available immediately.

Condition: excellent (used), For sale: a used KSB ETABLOC-GN 32-125/222 industrial centrifugal pump with a 2.2 kW electric motor. The pump has been inspected and is in full working order. It is in used condition, with normal signs of wear and tear, as well as some localized surface corrosion on the flanges and housing. The photos provide a detailed view of its condition. Pump technical data: Manufacturer: KSB Model: ETABLOC-GN 32-125/222 Design: GN11 Identification number: 48861776 Number: 5-925-204037/1 Capacity: 4–30 m³/h Codpsz Snvmjfx Aiijri Head: 25–18 m Rotational speed: 2900 rpm Approximate weight of the complete unit: 39.5 kg Motor data: Manufacturer: KSB Type: OU FA 90L2A-60 Power: 2.2 kW Power supply: three-phase Voltage: 220–240 / 380–420 V Frequency: 50 Hz Rotational speed: 2850 rpm Protection class: IP55 Insulation class: F cos φ: 0.89

Condition: excellent (used), For sale: a used Speck-Pumpen centrifugal pump, type 50/125, equipped with a three-phase Bauknecht electric motor, 4.0 kW. Pump specifications: Manufacturer: Speck-Pumpen Type: 50/125 Part No.: 69807 Manufactured in: West Germany Motor specifications: Manufacturer: Bauknecht Type: RF 4/2-76 No.: 3230192-2 Power: 4.0 kW Crsdpfx Aisz Snuzjisi Voltage: 380 V Current: 8.1 A Rotational speed: 2900 rpm Frequency: 50 Hz cos φ: 0.89 Protection class: IP44 Insulation class: B The pump has been inspected and is fully functional, ready for use.

Condition: excellent (used), For sale: a KSB ETABLOC-GN 65-160/1102.21 centrifugal pump, equipped with an 11 kW electric motor. The pump is used and in working order. It is in good technical condition and shows normal signs of use and storage. The exact visual condition can be seen in the photos. Pump technical specifications: Manufacturer: KSB Aktiengesellschaft Type: ETABLOC-GN 65-160/1102.21 Design: GN11 Ident-No.: 48861861 No.: 5-925-204038 / 1 Flow rate Q: 18–143 m³/h Head H: 35.5–22 m Rotational speed: 2900 rpm Crodpoz Sn R Rofx Aiisi Motor technical specifications (50 Hz): Manufacturer: KSB Power: 11 kW Voltage: 380–660 / 420 V Current: 20.8–12.0 / 19.0 A Rotational speed: 2900 rpm cos φ: 0.92 Protection class: IP55 Insulation class: F Motor weight: approx. 79 kg Condition: Used, in working order. Normal signs of wear and tear resulting from previous use and the age of the equipment. Scope of sale: KSB ETABLOC-GN pump with electric motor – exactly as shown in the photos, in the presented condition and configuration.

Condition: excellent (used), For sale is an industrial KSB ETABLOC-GN 50-200/1502.21 centrifugal pump, equipped with a 15 kW KSB electric motor. The pump is designed for industrial applications, technological installations, water circulation systems, and other suitable media. Pump technical data: Manufacturer: KSB Aktiengesellschaft Type: ETABLOC-GN 50-200/1502.21 Identification number: 48861841 Flow rate Q: 12–100 m³/h Head H: 55–34.5 m Rotational speed: 2900 rpm Connections: flanged Motor data: Manufacturer: KSB Type: QUPA 160 M2B-6 Power: 15 kW / 50 Hz Voltage: 380–660–420 V Current: 27.8–16.1–25.2 A cos φ: 0.93 Protection class: IP55 Insulation class: F Cjdpfx Asz Sn Sueiijri Motor weight: approx. 87 kg Condition: used, with normal signs of use and storage visible in the photos. A complete set consisting of the pump and electric motor is being sold, exactly as shown in the photos.

Condition: excellent (used), For sale is a Pumpen Distel type 50/200 centrifugal pump equipped with an 11 kW electric motor from Antriebstechnik G. Bauknecht AG. The pump is used and in working order. Visually, it is in good used condition and has normal signs of use and storage. The actual condition and completeness are shown in the photos. Technical data of the pump: Manufacturer: Pumpen Distel Type: 50/200 Serial No.: 78756 Flow rate Q: 40 m³/h Pressure: 4.5 bar Rotational speed: 2900 rpm Power: 11 kW Connections: flanged Technical data of the electric motor: Manufacturer: Antriebstechnik G. Bauknecht AG Type: RF 11/2-75 Power: 11 kW Voltage: 380 V Current: 22 A Frequency: 50 Hz Rotational speed: 2930 rpm cos φ: 0.88 Protection class: IP54 Insulation class: B Operating mode: S1 Credpfjz Sn Sbjx Aiioi Mounting form: B3/B5 Condition: Used, in working order. Has normal signs of use and storage. Scope of sale: Complete centrifugal pump with an 11 kW electric motor – exactly as shown in the photos.

Condition: new, For sale: a NEW, unused KSB ETABLOC-G 40-160/552.2 centrifugal pump with a 5.5 kW electric motor. The pump comes from warehouse stock. It is new and unused. The set includes the original KSB carton and operating manual. Pump technical data: Manufacturer: KSB Model: ETABLOC-G 40-160/552.2 Ident-No.: 48862664 Flow rate Q: 7.5–63 m³/h Head H: 35.8–24 m Pump speed: 2900 rpm Design: G11 Motor: Power: 5.5 kW Power supply: 3-phase Frequency: 50 Hz Voltage: 380–420 / 660–725 V Speed: 2880 rpm Protection class: IP55 Insulation class: F Condition: NEW / UNUSED – warehouse stock. Credpjz Sn Aaofx Aiiji The pump is in its original KSB packaging. The operating manual is included. The item for sale is exactly the one shown in the pictures.

Condition: good (used), Pumpex water pump, 300 m³/h, 7.5 kW Codpfsz Skzaox Aiieri

Condition: excellent (used), For sale is a vertical, multi-stage KSB Movitec V 4/16 B centrifugal pump with a 3 kW electric motor. The pump is in good visual condition. The unit also bears a service marking from ROCK Elektromotoren Reparaturwerk, indicating a previous inspection/service. Pump technical specifications: Manufacturer: KSB Model: Movitec V 4/16 B ID: Flow rate Q: 4.0 m³/h Head H: 119.1 m Pump speed: 2920 rpm Connection: PN16 Hydraulics: PN40 Seal: SiC/Ca/EPDM Temperature range according to nameplate: up to +120°C Pump year of manufacture: 2012 Motor: Power: 3.0 kW 50 Hz: 2900 rpm Voltage: 400D / 690Y V Protection class: IP55 Insulation class: F Operating mode: S1 Motor weight: 27 kg Crsdpfx Aioz Sn Ageioi The item offered for sale is exactly the one shown in the pictures.

Condition: excellent (used), For sale: an industrial centrifugal pump, KSB ETABLOC-GN 32-125.1/024.1, with a 0.25 kW electric motor. Pump specifications: • Manufacturer: KSB • Model: ETABLOC-GN 32-125.1/024.1 • Design: GN • Pump number: 4-925-104322/2 • Flow rate: 6.0 m³/h • Head: 2.0 m • Pump speed: 960 rpm Motor specifications: Crsdpfxez Snuvo Aiiei • Motor number: 9870132-0090-0003 • Power: 0.25 kW / 0.34 HP • Power supply: three-phase • Voltage: 400/230 V • Frequency: 50 Hz • Speed: 890 rpm • Current: 0.85/1.49 A • cos φ: 0.73 • Protection class: IP54 • Insulation class: F • Duty cycle: S1 • Mounting method: IM B14

Condition: good (used), Year of construction: 2015, functionality: fully functional, Reverse Osmosis Plant for ethylene glycol recovery, with a 12 m³ raw-water storage and homogenisation tank, nominal feed flow rate of 4 m³/h at 4 bar and filter backwash flow rate of 11 m³/h at 1.5 bar. Includes an automatic downflow multimedia filter with anthracite and sand beds supported on gravel, designed to remove suspended particles and protect the membranes. Compact skid-mounted reverse osmosis unit with two-stage filtration using replaceable 20- and 5-micron cartridges, a variable-speed high-pressure pump and a two-stage (1+1) × 6 reverse osmosis membrane configuration. Equipped with 8-inch DOW spiral-wound aromatic polyamide membranes installed in GRP pressure vessels rated up to 1,000 psi. Nominal recovery rate: 90%, equivalent to a theoretical permeate production of approximately 3.6 m³/h under design conditions. Low- and high-pressure piping and interconnections manufactured from AISI 316L stainless steel. Includes recirculation, front and side permeate collection, a CIP chemical cleaning system, membrane flushing, a GRP solution-preparation tank, a 25-micron mesh microfilter and a delivery pump for cleaning solutions and permeate water. Automated control system based on a Siemens S7-200 PLC, providing measurement and control of flow rates, temperature, pressures, pressure drops, operating times, pumping, backwashing, flushing and process alarms. Operator panel with a 6-inch colour touchscreen for parameter display and configuration, start/stop control, filter washing, alarm monitoring and trend graphs. Includes a 2 m³ reverse osmosis reject-water tank for subsequent transfer to the evaporator. Serial No.: MPP51525. Codpfxjzvddce Aiiori

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 844, PLEASE READ THE DESCRIPTION CAREFULLY Used IPF25 filling machine with integrated weigher for filling paper open-mouth bags, including bags with handles. The machine is suitable for processing a variety of bulk products, such as: Cat litter Pet food Charcoal Wood pellets Other dry bulk materials .... Bag dimensions: Width: 150 to 300 mm Length: 300 to 600 mm Side gusset: 35 to 85 mm The machine is currently in our workshop and is undergoing refurbishment. The refurbishment work will be carried out in stages. If you are seriously interested, we can expedite this process so that the machine becomes available sooner. Please feel free to contact us for additional information or to arrange a viewing. Cedozrvldjpfx Aiieri

Condition: used, IKA LR 2000 V Laboratory Reactor For sale is a professional, modular IKA LR 2000 V laboratory reactor system in ready-to-use condition. This configuration is the ideal workhorse for product development, simulation, and small-scale production (e.g., in the fields of cosmetics, pharmaceuticals, chemistry, or food technology). Thanks to its vacuum compatibility and the combination of an anchor stirrer and a high-performance disperser, the system is perfectly suited for the production of stable emulsions, creams, and lotions. Here you will receive a complete, ready-to-use system. The expensive double-walled glass vessel with bottom outlet, the heating bath with temperature sensor, and the Ultra-Turrax T25 including shaft are already included in the package. Credpez I Szwjfx Aiiei You save yourself the tedious and costly individual purchases, which would amount to thousands of euros! Scope of delivery & technical components: Reactor vessel: Double-walled 2.0-liter vessel made of high-quality borosilicate glass 3.3. The jacket allows for precise heating and cooling via external thermostats. Equipped with a practical bottom outlet valve for clean emptying. Mixing tools: Integrated anchor stirrer for optimal wall scraping with viscous masses, as well as a suitable flow breaker to prevent vortex formation and for perfect vertical mixing. Dispersing device: IKA ULTRA-TURRAX T25 including matching dispersing shaft. Enables highly effective homogenization and size reduction directly during reactor operation. Drive & control: Robust IKA control unit RE 162 P for powerful stirring even at low speeds. Temperature control: Water bath LT5 control including external temperature sensor. The sensor measures the temperature directly inside the reactor medium, which enables highly precise control via the water bath. Accessories: Complete stand system for the secure mounting of all components as well as all necessary holders. Note: The sale is without control software. The system can be fully, independently, and easily controlled directly via the hardware controls. "Everything from one source: We will gladly offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs on request!

Year of construction: 2021, condition: used, Removes oil from your compressor condensate The Alup OWS 18 collects the condensate from a screw compressor, dryer or receiver and separates out the oil. The water that is left can then usually go straight into the drain, so you do not have to have oily condensate taken away. The separator was built in 2021, weighs 6.8 kg empty and is compact enough to sit next to the compressor. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Oil-water separator for compressor condensate Filtration: Oil filter and activated carbon filter Weight: 6.8 kg (empty) Crjdpfsz Ndazsx Aiiji

Condition: used, Year of construction: 2007, operating hours: 66,031 h, functionality: fully functional, type of input current: three-phase, power: 800 kW (1,087.70 HP), input voltage: 400 V, type of cooling: water, input frequency: 50 Hz, input current: 80 A, MWM / Deutz TCG 2016 V16 CHP Unit – Approx. 800 kWe – Natural Gas For sale: complete MWM / Deutz TCG 2016 V16 CHP unit, year 2007, suitable for operation on natural gas. The unit has approximately 66,031 operating hours. The last major service was performed at approximately 48,000 operating hours. The CHP unit will only be sold after the engine overhaul has been completed. Work included before delivery Prior to delivery, the following work will be carried out: - Complete overhaul of the MWM TCG 2016 V16 engine - Overhaul of the electric pumps - Cleaning of the exhaust gas cooler - Cleaning of the condenser The generator was tested while the unit was still in operation and was found to be in good working order. The unit is currently disconnected from the gas supply. The oil and cooling water have been drained in preparation for the overhaul, so the engine and complete CHP unit can no longer be demonstrated running in its current condition. Main specifications - Manufacturer: MWM / Deutz - Model: TCG 2016 V16 - Year: 2007 - Fuel: Natural gas - Electrical output: approx. 800 kWe - Generator: Marelli - Generator rating: 1,300 kVA - Grid frequency: 50 Hz - Control system: TEM Evolution - Operating hours: approx. 66,031 h - Last major service: approx. 48,000 h Crjdpez E A Rwjfx Aiioi Scope of supply The unit is offered as a complete CHP package and includes: - MWM / Deutz TCG 2016 V16 gas engine - Marelli generator - TEM Evolution control system - Gas train - Generator switchgear - Heat recovery equipment - Exhaust gas cooler - Condenser - Associated installation components supplied with the unit The unit is suitable for grid-parallel operation and can also be prepared for island / stand-alone operation if required. Complete service and technical documentation A complete maintenance history is available, including: - Full service logbook - Maintenance records - Oil sample reports - Electrical schematics - P&ID drawings - Technical and maintenance documentation Technical performance data for this engine type is also available, including information on electrical efficiency, gas consumption, thermal output, and total CHP efficiency. Installation and commissioning available In addition to supplying the CHP unit, CHP Solutions can also provide installation and commissioning on site. Depending on the project requirements, we can offer support with: - Positioning and installation of the CHP unit - Mechanical installation - Electrical installation - Gas connection - Cooling and heat-recovery connections - Grid connection - Start-up - Commissioning - Preparation for grid-parallel or island operation This means the CHP can be supplied not only as a unit, but also as part of a complete installed and commissioned energy solution. The unit is located in the Netherlands and can be inspected by appointment. For further technical information, documentation, photos, installation options, or a complete project quotation, please contact CHP Solutions.

Condition: new, functionality: fully functional, fuel type: diesel, overall weight: 16,500 kg, Year of construction: 2026, Throughput capacity: up to 200 t/h Screen box: 2,743 x 1,220 mm Cjdpfx Ajz Nhvuoiisri Screen decks: 2 Screen angle: 14° Feed hopper capacity: 5 m³ Drive: diesel-hydraulic Discharge height, final discharge conveyor: 3,430 mm Discharge height, fine fraction discharge conveyor: 3,145 mm Discharge height, medium fraction conveyor: 3,145 mm Weight (without options): 16,500 kg Transport dimensions: 9,880 x 2,550 x 3,190 mm Throughput capacity: up to 200 t/h Screen box: 2,743 x 1,220 mm Proven quality. High throughput. Robust design. Worldwide support: service and spare parts support worldwide.

Condition: ready for operation (used), Year of construction: 2020, overall weight: 564 kg, fuel type: electric, total length: 2,346 mm, total width: 1,285 mm, total height: 1,747 mm, cooling capacity: 25 kW (33.99 HP), heating capacity: 50 kW (67.98 HP), type of cooling: water, 2 Chilled Water Production Units Reversible – Variable power output: 25 or 50 kW Equipped with transport chassis Never used – Available for immediate delivery Cjdpfxez Rvr Hs Aiisri For sale individually, two identical units available.

Condition: new, Corona DP 405 multi-jet contact water meter with pulse transmitter New multi-jet turbine water meter in a fully dry-running design with an integrated contact transmitter for remote transmission of flow rates and for proportional control of pumps and motors. Manufacturer: Corona Type: DP 405 Device type: Multi-jet contact water meter Measuring principle: Multi-jet turbine meter Design: Fully dry-running with magnetic coupling Pulse transmitter: Encapsulated reed contact (normally open) Contact transmitter: Waterproof encapsulated, replaceable Cable length of contact transmitter: 2 m Maximum contact voltage: 24 V Maximum contact current: 0.2 A Nominal pressure: PN 16 Medium temperature range: +1 to +30 °C Temperature resistance: +1 to +90 °C Storage temperature: +1 to +55 °C Degree of protection: IP65 Totalizer: Rotatable Condition: New Quantity: 1 Codpfxjz Rv Hwe Aiisri

Condition: used, Universal water temperature control unit with electric heating and connections for external cooling. Pressurized water temperature control unit, circulating process temperature control, heater, cooler, electric heating. Crjdoz N H D Depfx Aiiei SINGLE type STW 180/1-36-100-S Mfg. No.: 130568 Year of manufacture: 2013 Temperature max. 180°C Temperature range +20°C to 180°C Operating overpressure max. 6 bar Pump capacity 100 l/min. Tank volume approx. 22 liters (internal volume) Heating capacity 36 kW - direct injection cooling Pump motor power 1.1 kW Heat transfer medium water Circulating water supply + return DN 32 - G 1 1/4" Cooling water supply DN 20 G 3/4" Cooling water return DN 20 G 3/4" Connection power 41 kVA Rated current 57 A Control system SC Standard type R8200-S-1-SI1-0-6 Mains connection 400 Volt, 50 Hz. - Temperature control - An external cooling unit or an external cooling circuit is required for cooling (cooling is achieved through direct injection of cooling water into the cooling medium without a heat exchanger). - mobile on 4 rollers - Supplied without connection cable Dimensions L x W x H 1300 x 370 x 1150 mm Weight 200 kg Good condition

Condition: excellent (used), mileage: 425,359 km, power: 265 kW (360.30 HP), first registration: 01/2001, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: red, driver cabin: day cab, gearing type: mechanical, suspension: steel-air, total length: 9,700 mm, total width: 2,530 mm, total height: 3,030 mm, = Additional options and accessories = - PTO = Notes = BELGIAN TRUCK, EX-FIRE DEPARTMENT VEHICLE 8000 LITER STAINLESS STEEL WATER TANK + MP10-1000 BRICK PUMP, 2003 EXCELLENT CONDITION = Additional information = General information Year of construction: 2001 Technical information Number of cylinders: 6 Axle configuration Front axle: Steerable; Suspension: Leaf spring suspension Rear axle 1: Twin tires; Suspension: Air suspension Rear axle 2: Lift axle; Suspension: Air suspension Weights Unladen weight: 11,485 kg Payload: 14,515 kg Crodpfozdlp Aox Aiiei GVW: 26,000 kg Maintenance, history, and condition APK (Technical Inspection): Valid until 07.2027 Technical condition: very good Visual condition: very good Additional information Please contact Thierry Leemans for further information.

Year of construction: 2020, condition: used, This listing is for Puro-i III | RO Water Purification System The unit is in full working condition and ready for immediate use The Avidity Science Puro-i III is an integrated reverse osmosis water purification system designed to produce Type III laboratory water directly from potable tap water. Depending on configuration, the system provides production rates from 5 to 30 L/hr, with dispensing at up to 2 L/min. Features include twin-pass RO technology, automatic RO sanitisation and an interactive touchscreen interface. Typical specifications include Type III water production, up to 99% inorganic rejection and feed-water pressure of approximately 0.5–6 bar. Available configurations include different production rates, reservoir conductivity monitoring and loop options Transparency Report and Technical Audit: Crjdpfoz D H D Esx Aiisi Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: -, overall weight: 1,000 kg, total length: 3,500 mm, total width: 500 mm, total height: 1,200 mm, input voltage: 400 V, type of input current: three-phase, cutting speed: 50 mm/min, The Oddy Novatek 2 Pocket Roll Plant with Pinner is used to automatically divide, round, shape, and mould raw bread dough into uniform rolls and buns at high speeds. It replaces the labor-intensive process of scaling and shaping dough by hand, making it a staple machine for small-to-medium commercial bakeries, wholesale bakers, and supermarket in-store bakeries. 1. Primary Functions: Dividing: It automatically cuts a bulk mass of dough into precise, equal weights without tearing the dough structure. Rounding: It rolls the divided dough portions into tight, consistent round dough balls (baps, dinner rolls). Pinning & Moulding: The integrated "pinner" section flattens and rolls the round dough pieces into elongated shapes (finger rolls, hot dog buns). 2. Specific Bakery Products It Creates: By changing the internal moulding drums or adjusting the pinner belts, bakeries use this machine to produce: Round items: Hamburger buns, traditional baps, dinner rolls, and slider buns. Elongated items: Hot dog rolls, finger rolls, bridge rolls, submarine rolls, and miniature baguettes/batards up to 230mm long. 3. Why Bakeries Use It (Key Benefits): Massive Labour Savings: It can produce up to 6,000 rolls per hour (100 rolls every minute), a volume that would require a large team of bakers to do manually. Cost Efficiency (Oil-Free System): Unlike traditional dividers that require expensive food-grade divider oil to keep dough from sticking, the Novatek uses a completely dry, oil-free process. This saves thousands of pounds annually in oil costs and makes cleanup much easier. Product Consistency: Every roll comes out exactly the same weight (from 10g up to 208g in 2-row mode) and the same shape, which ensures uniform baking times and presentation. Physical Dimensions & Spatial Footprint: Standard Operating Footprint: Typically occupies a width of 0.8 m to 1.2 m and a base chassis length of 1.5 m to 2.5 m. Csdpfx Aez Ad Dcsiiori Extended Length with Integral Pinner: When configured with the long-bed outfeed pinner/moulder belt assembly, the total inline workspace length requires approximately 3.2 m to 3.8 m to clear the outfeed table. Operating Height: Roughly 1.6 m to 1.8 m to the top rim of the bulk dough feed hopper to facilitate ergonomic manual or conveyor loading. Total Net Weight: Approximately 950 kg to 1,200 kg depending on the configuration of heavy-duty plunger blocks, internal moulding drums, and chassis reinforcement. Operational & Production Capabilities. Throughput Capacity: Processes up to 50 dough pieces per minute per row. For a standard 2-pocket (2-lane) configuration, this delivers a maximum output of 6,000 pieces per hour. Hopper Capacity: Features a standard integrated bulk dough conveyor hopper that accommodates 55 kg of raw dough. Scaling Ranges: 2-Row Operation: Scales between 10 g and 208 g simultaneously across both lanes. 1-Row Operation: Reaches 208 g to 500 g utilising lane blanking and larger interchangeable plunger blocks. Pinner Capabilities: Accurately stretches and shapes rounded dough pieces into finger rolls, hot dog buns, or miniature batards up to a maximum length of 230 mm. Utility & Facility Requirements: Electrical Supply: Requires a standard industrial 3-phase 400V, 50Hz electrical hookup.

Condition: new, We offer you high-quality roll-off containers as water tanks/water reservoirs, manufactured to your specifications using a self-supporting design. Available to order! Europe-wide delivery! ---FINANCING---LEASE PURCHASE---LEASING--- -possible, please contact us!- Crjdozhwccjpfx Aiiji Possible dimensions: 4 - 7.0m x 2.30 x 1.0m Possible internal heights: H = 800 mm H = 1000 mm H = 1100 mm H = 1300 mm H = 1500 mm Optional: Rear platform for mounting a water pump Other dimensions available on request!!! We will gladly design according to your specifications. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Rule 214-017 Material thicknesses: Base: 5 mm Walls: 3 mm Roof: 3 mm Cross member: INP 180 Lifting bracket Ø 50 mm, hook height 1,570 mm - 2 internal baffle plates - Internal level indicator with float - Dome lid with rubber seal, 50 x 50 cm - 1x C-Storz connection below the level indicator - Front/top vent with shut-off valve - Rear with approx. 50 cm platform - Rear with 1x C-Storz connection - Rear with 1x 6-inch flange -> Watertight welded with 24-hour leak test - Primed once internally, twice externally - Externally painted twice in a single color according to your desired RAL color Optionally available: - Protective coating inside, according to specifications for the respective application - Fully galvanized version - Anti-slip coating on the roof - A-B-C Storz connection of your choice - Hydraulic dome lid - Additional rear hydraulics for slide valve - Subframe UNP220 for 22t total weight!

Condition: used, Weiss Type: SWT 200/400 Weiss Spray and Splash Water Test Chamber The chamber is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum. Features Glass door with wiper Pneumatic drive for the pivoting nozzle Adjustable pivoting angle Replaceable pivoting nozzles Nozzle holder is pivotable and replaceable Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress Max. load with test specimen (evenly distributed over the surface) Permissible test specimen weight for test specimen carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection tests Pivoting speed approx. 60°/s Pivoting angle IPX3 approx. ± 60° Pivoting angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A Weight: 375 kg Condition: used Scope of supply: (See picture) Codpfx Aijzh D Rmsiori (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.