Used Water Slot Milling for sale (17,623)

Condition: new, Year of construction: 2025, Semiautomatic milling machine with four electrospindles for water slot MLA WS42 EVO, new Hedowqlmdjpfx Agfoff

Condition: good (used), Year of construction: 1984, Water slot milling machine, water slot milling machine -Three-spindle -electropneumatic circuit Hfodpfx Agsx R Sv Sjfof -pneumatic workpiece clamping -Fine adjustment via spindles and handwheels

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11/05/2026 and 13/05/2026, or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Dimensions & Weight Dimensions (L x W x H): 4000 x 1000 x 1600 mm Machine weight: 400 kg EQUIPMENT Support surfaces on the right and left Hedpfsyn Ecxjx Agfsff External reference: Groven - Lot 8

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Hjdpfxsthuzpe Agfsff Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Slotting head for milling machine, milling head, CCCP / UDSSR STANKO type 1502 No: 200 Year of manufacture 1974 Hsdod Dk A Aopfx Agfeff Stroke size: max. 60 mm Stroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Hole spacing machine flange plate: 245 x 185 mm Mounting hole: Ø 17 mm Centering diameter on the machine flange plate: 190 mm - Stroke size adjustable via eccentric adjustment - The drive is like the normal vertical head from the machine gearbox - Drive via driver, centric in the centering diameter - Degree scaling on the flange plate +/- 45° steplessly pivotable - This grooving head is flange-mounted in place of the normal vertical milling head (mounting in place of the vertical milling head, milling head) Weight: 42 kg good condition Slotting head bearing number 58166 and vertical milling head bearing number 58164 from identical STANKO milling machine.

Condition: new, Transportable and flexible table machine, mills a keyway for theSwallow sizes Wction:Adjust the stops to measure and insert the workpiece. When the handle is depressed, the workpiececurious, excited. At the same time, the milling group moves to the set milling depth. The milled part will be at start-upof the handle is released again, the motor switches off automatically. Finished!Technical specifications:Electrical connection values 1ph/N/PE 230 V 50/60Hz 1.0 kWMotor 1 x 1000WIdle speed 34000 ual controlWorkpiece clamping manuallyPassage height 130 mmMilling depth 0-85 mmSuction connection Ø 50 mmSwallow size W-0/1/2/3/4Dimensions W/D/H 740/650/835Weight 32kgOrder No. W1031000 Hfsdpfx Agevwf Dkefjf

Condition: ready for operation (used), Year of construction: 1960, machine/vehicle number: 719, Manufacturer: Hurth Model : LF 00 Machine No. : 719 Year of manufacture : ca.1960 Weight: ca. 400 KG General / technical data: used horizontal grooving milling machine with crank gear controlled groove length adjustment and automatic depth adjustment groove width for cutter Ø: from 2 to 10mm length of grooves in one cut: from 0 to 60mm + cutter diameter 10 depth feeds feeds: 0,03 to 0,3 mm milling feed: 8 speeds of the milling carriage by crank stroke: 5,1 / 7,3 / 10,2 / 13,9 / 18,4 / 25,4 / 34,7 / 49,5 strokes/min spindle speeds: 4 pieces 970, 1370, 1950, and 2750 rpm table dimensions (rigid table): 160mm x 355mm table height adjustment: 40mm transversal movement of the table ( against the cutter ): 110mm power supply / spindle motor power: 380Volt 50 HZ / 0,8 KW / 920 1/min approx. space requirement of the machine: 670mm x 1100mm x 1200mm (bxtxh) Accessories / special equipment: Chip tray coolant device Machine documentation Remarks: The machine is in a condition corresponding to its age. The machine is preferably designed for production use in small and medium series. The machine has a simple crank gear adjustment to determine the length of the groove. Hsdpfxog Uq Dfs Agfoff

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Hfsdpfsxy Styox Agfsf Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Condition: used, Slotting head, suitable for DECKEL type FP 2 milling machine Manufacturer No. 2211 / 1895 Dovetail width: approx. 76 - 88 mm Hjdpewbi Rbefx Agfjff Dovetail height: approx. 14.5 mm Dovetail length: 320 mm Dovetail leading edge to gear center: approx. 235 mm Stroke size: max. 80 mm Stroke rate: max. 210 double strokes/min. Tool holder: square, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Driven by the machine gear, within the dovetail guide (as with a normal vertical head) - This slotting head is inserted into the dovetail guide in place of the normal vertical milling head (Mounted in place of the vertical milling head, milling head) - Drive gear in the slotting head, 39 teeth, gear width 16 mm, presumably 20° pressure angle - Slotting head on the flange plate can be rotated 360°, degree scale +/- 35° Weight: 32 kg Very good condition DECKEL FP1 has a pressure angle of 15° on the drive gear DECKEL FP2 + FP3 - has a pressure angle of 20° on the drive gear

Condition: new, Centauro ALFA NC Machining Centre For Joinery Components & Doors A versatile and flexible NC controlled machining centre suitable for a variety of machining operations including hinge recessing, lock slots, handle holes, key slots and euro grooves etc. Programming is extremely simple thanks to the colour graphic touch screen controller using pre-installed electronic macros. As standard the machine can be equipped with one milling head that automatically moves for either vertical or horizontal machining. It also has interpolation of the axis. Optional additional machining operations include producing a square corner hinge plate recess or lock face recess by means of the additional milling unit. The operator simply selects in the program if they want a radius or square corner and the machine does the rest. In addition the same milling head can be used to make the small pilot hole for hinge screws etc. There is also the possibility to produce a square end tenon, round end tenon or dovetail / dovetail slot when the special front table is fitted. Lastly on request the machine can be configured to import ISO files from external design software (e.g ARTCAM Express) to enable detailed engraving of items such as name plates etc. Axis capacity - X 2800mm, Y 180mm, Z 150mm. (2400mm X capacity when optional drilling head fitted). 1 x ER32 collet for milling cutter 16mm max. dia. Max working table dimensions - 3000x618mm X axis positioning speed 35m/min. Y axis / Z axis positioning speed 6m/min. Retractable pneumatic positioning stops 2 off - on front of table Adjustable pneumatic workpiece clamps x 3 - mounted on rear of table. Left hand side ref. stop. Front table extension supports x 2 Router motor power 3.3kw. Router motor RPM 0-18,000 rpm. Hfsdsb Tmngopfx Agfsf Touch screen controller - Elco Power 1000. Dust extraction outlet x 1 80mm dia, 2 x 100mm dia CE side and rear safety guards with front light curtain.

Condition: new, Year of construction: 2025, functionality: fully functional, Automatic water groove milling machine with 4 motors Hfodpfxsxta Ixs Agfsf

Condition: used, This listing is for the Millipore Elix Advantage 15 Water Purification System The unit is in full working condition and is ready for immediate use The Elix Advantage 15 is a laboratory water purification system designed to generate Type II pure water directly from potable tap water using an advanced combination of purification technologies. It’s part of Millipore’s Elix series, which emphasizes reliable, continuous production with minimized maintenance needs. Hfsdpfx Asx Tuctogfef

Condition: used, This listing is for a Millipore AFS 15E Water Purification System with 60l Tank. The unit is in full working condition and is ready for immediate release. The Millipore AFS 15E is designed to deliver high-quality Clinical Laboratory Reagent Water (CLRW) efficiently and economically, making it essential for laboratories that adhere to rigorous standards. Key Features: CLRW Compliance: Produces water that meets the Clinical and Laboratory Standards Institute (CLSI) guidelines, ensuring reliability in clinical settings. Elix® EDI Technology: Utilizes advanced electrodeionization (EDI) for low and predictable operating costs, coupled with self-regenerating ion exchange resins that reduce maintenance. Data Monitoring: Equipped with full monitoring capabilities, the system archives water quality data for up to six months, allowing for easy tracking and compliance verification. Feed Water Quality: Accepts potable water with a pressure range of 1–6 bar and a temperature range of 5–35°C, ensuring versatility in various setups. Storage Capacity: Comes with a 60L tank, providing ample storage for the purified water, which is crucial for laboratories with high water demands. Specifications: Production Capacity: Generates up to 300 litres of water daily, catering to high-throughput needs. Hjdpjxxy Szofx Agfoff Production Flow Rate: Delivers water to the reservoir at 15 L/h. Distribution Flow Rate: Dispenses water to analysers at up to 2 L/min, ensuring quick access when needed. Product Water Quality: Resistivity at 25°C: > 15 MΩ·cm, indicating high purity. Total Organic Carbon (TOC): < 30 ppb, suitable for sensitive analytical applications. Dimensions: Compact size of 585 x 268 x 426 mm (23 x 10.6 x 16.8 in) enables easy integration into laboratory spaces.

Condition: used, This listing is for 1 of 2 Millipore Sigma RioS Essential 24 Water Purification Tank These units are in full working condition and is ready for immediate use The RiOs Essential 24 is a compact, efficient RO system that delivers around 480 L/day of consistent Type 3 water. It features minimal maintenance, intelligent self‑management, and smart cartridge monitoring—ideal for routine lab task Key Performance Specs Flow Rate: 24 L/hour (≈ 480 L/day) for non-critical lab uses Purity: Provides Type 3 water with ionic rejection between 95–99% and organic/particulate rejection ≥99% (MW ≥ 200 Da) Purification Process & Internal Features Progard® pretreatment cartridge: Removes particles (>1 µm), free chlorine, hardness, and colloids. High-efficiency RO membrane: Removes dissolved ions, organics, microorganisms, and particulates. Recovery loop: Recycles a portion of reject water to feed, cutting water waste by over 50% compared to conventional RO systems Hjdpfxjxhfpdj Agfeff Temperature compensation: Automatically adjusts pump pressure to maintain steady flow across 5–35 °C feed water Design & Operation Footprint: Compact – 47 cm high × 26.8 cm wide × 33.9 cm deep Weight: Net weight ~10.9–12.1 kg; Operating weight ~14.4–15.7 kg Power: 100–230 V AC, 50–60 Hz Feed water specs: Tap water under 2,000 µS/cm conductivity, 1–6 bar pressure, 5–35 °C,

Condition: used, This listing is for 1 of 3 Millipore Rios-DI UV Water Puerification System RiOs-DI® 3 UV Water Systems with built-in 254 nm bactericidal UV lamp easily and economically produce up to 15 L/day of consistent-quality Type 2 pure water from tap water. A combination of reverse osmosis (RO) technology and deionization (DI) resins delivers water with high resistivity ( > 10 MΩ·cm) and low TOC (< 30 ppb) whose quality surpasses that of service DI or distilled water UV lamp helps ensure optimal water quality for bacteria-sensitive applications Pure water flow rate of >2.4 L/hr Integrated 6-L storage reservoir Avoid the drawbacks of other purification methods such high lab space demands for resin bottles or distillation equipment; heavy maintenance; lack of quality monitoring; and in the case of distillation, high energy and water use Hfodpfx Agexzhcmsfof

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 9558, Used fully functional WJS waterjet cutting machine with KMT SLIV 50 HP pump. Hfjdpfji Hckrsx Agfef Machine is in disassembled condition and can not be inspected. Installation and commissioning will be done by us and is not included in the price. The machine can also be completely overhauled ( new control cabinet, new control and new CE. This would mean a surcharge of about 50.000€)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Hfjdpfxoyahv Se Agfef Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: used, Year of construction: 2021, machine/vehicle number: 70602008, High-performance industrial vacuum evaporator designed for the treatment and volume reduction of industrial wastewater and process liquids. This system uses heat pump technology combined with vacuum evaporation to achieve efficient distillation at low temperatures. Technical Specifications:Capacity (distillate production): approx. 12,000 – 12,700 L / 24 h Technology: Heat pump vacuum evaporation Operating mode: Fully automatic continuous operation with PLC control (Siemens) Refrigerant: R134a Installed power: approx. 114 kW Operating temperature: 35 – 45 °C Distillate temperature: 37 – 47 °C Concentrate temperature: 35 – 45 °C Operating pressure: 6 – 8 kPa (vacuum) Dimensions and Weight Total length: approx. 5600 mm Total width: approx. 1500 mm Total height: approx. 3800 mm Weight: approx. 4,000 – 5,000 kg Hodpfx Aeyu Sfaegfoff Condition: Used – very low operating hours. EVALED AC R 6 (vacuum evaporator / crystallizer “R” scraped type) is about 6 t/day class. Veolia EVALED AC R6 FF3 Vacuum Evaporator / Crystallizer – Wastewater Treatment

Condition: refurbished (used), Year of construction: 2006, table length: 3,500 mm, table width: 1,500 mm, Pictures are in current condition - two Z-axes - 1 x 45° Schnedikopf , 1 x 2D - control unit will be renewed - will be sandblasted and repainted Hsdpfxjnab Rze Agfsff - pump optionally available - available in 12-16 weeks after order Special features: - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, temperature: 35 °C, operating pressure: 75 bar, energy consumption: 64 kWh, Industrial plant for the treatment and concentration of process water as well as for nutrient recovery. The plant combines a double-pass reverse osmosis (RO) system with a thermal evaporator unit and was originally developed for biogas production to recover ammonium-containing fertilizer from process water and digestate. The plant was never commissioned due to the operator's insolvency and is in a preserved condition. The system is suitable for operators from the industrial, environmental technology, or agricultural sectors who are looking for a rapidly available solution for water treatment, ZLD (Zero Liquid Discharge), or nutrient recovery. Technical data System type: RO Double Pass + Evaporator Model: SIMPEC RO Double Pass 8000 44 8 Evaporator 57 000 Year of construction: 2020 Permeate output: Stage 1: 7.5 m³/h Stage 2: 6.7 m³/h Hodpfxoyr H Anj Agfeff Permeate quality:

Condition: good (used), Year of construction: 2002, functionality: fully functional, Waterjet Cutting System IR Manufacturer: WATER JET Ingersol Rand Model: OEM 30 Serial number: 0211141 Hedpjyrfg Eofx Agfjff Year of manufacture: 2002 Control system: TH 2030, new and never used Pump has been fully overhauled Working area: 3000 x 1500 mm Max. working pressure: 60 KSPI Operating voltage: 400 V Control voltage: 24 V Main fuse: 63 A Rated current: 55 A Frequency: 50 Hz

Condition: excellent (used), Item: D-10800-BacTerminator Hfjdpjh Dxqvofx Agfsf BacTerminator BTM10FD11001 Water Disinfection Equipment Inclusive pumps, Control and other accessories. Nice condition

Condition: excellent (used), Professional TITE-LOCK MILLING CHUCK with SK40 – CT20A mounting – 90 mm. The high-quality quick-clamping TITE-LOCK system ensures exceptional clamping force and working precision, ideal for milling, drilling, and precision machining. . Type: TITE-LOCK MILLING CHUCK . Mounting: SK40 – CT20A . Length: 90 mm . Applications: milling, drilling, CNC machining . Condition: used, fully operational, very good technical condition ✅ Robust and precise industrial tool for professional use on milling machines and machining centers. Excellent rigidity and high tool holding force. Hsdpjxk T H Ajfx Agfeff

Year of construction: 2023, condition: new, machine/vehicle number: 001, The Stainless Steel Molasses Mixer is an advanced machine designed for homogeneous mixing of raw materials with liquids such as molasses and steam. With its two shafts and high-quality stainless steel construction, this machine offers durability and efficiency in one. The strength of this molasses mixer lies in its ability to deliver a continuous mixing process with an impressive capacity of 60 tons per hour. This makes it ideal for industrial applications where consistent and even mixing of materials is crucial to the production process. The machine's stainless steel construction ensures not only durability but also hygiene, making it suitable for applications in the food industry and other sectors where strict standards apply to materials in contact with products. Hodpfxjrk Ipns Agfoff Whether in the production of animal feed, chemical mixtures or other industrial processes, the stainless steel molasses mixer guarantees reliability and consistency in the mixing process, making it a valuable asset for modern production environments. Power:2 x 22 kW Speed:1500 rpm 2. volume: 600 liters 3. capacity:60 Tons/Hour 4. weight: 2500 kg

Year of construction: 2017, condition: ready for operation (used), Cutting heads: 2, cutting head type: AWJ 2D, abrasive feed: system SM4000, pump type: KMT Streamline SL-VI Standard, max. pump pressure: 3800bar. Table dimensions X/Y: 3200mm/1710mm, cutting dimensions X/Y: 3010mm/1510mm, travel range X/Y/Z: 3010mm/1510mm/250mm, travel speed: 12m/min, cutting head distance range: 90mm-450mm, positioning accuracy: +/-0.075mm, repeatability: +/-0.035mm, control: Fanuc 0i-MF, operating hours: 4866h. Includes oil cooler, water treatment, and safety zone. Documentation available. On-site inspection possible. Hfjdpfxexp Rcfo Agfsf