Used Wash Out for sale (6,250)

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, Ultrasonic cleaning device Glogar Ultrasonic 600H Tank capacity max.: 58 litres Basket dimensions (usable): 400 x 255 x 220h mm Internal tank dimensions: 500 x 330 x 350h mm Hedpofk Tt Isfx Ak Djl Outer dimensions of the unit: 670 x 580 x 936h mm Ultrasonic frequency: 25 / 45 kHz (switchable) Ultrasonic power eff./max.: 900 / 3.600 Watt Heating power: 2.800 Watt Sweep: yes Pulse: yes Degas / Autodegas: yes Drain/diameter: 3/4 basket load: 25 kg Included in delivery is 1 stainless steel basket and 1 noise protection lid. Delivery ex works (FCA), AT-4490 St. Florian b. Linz Device is produced in Germany! OTHER DEVICE DIMENSIONS AND DESIGNS ON REQUEST.

Condition: used, Year of construction: 1999, Technical details: pass through height: 2000 mm tank capacity: 800 l cycle time: - sec Heating capacity: 45 kW electrics - voltage/frequency: 400/50 V/Hz lifting capacity: 2000 kg temperature range: max. 65 °C total power requirement: 63 KW daylight opening: 2000 mm space requirements of the machine approx.: 3.800 m Hjdpfeymc Txjx Ak Dsl *

Year of construction: 2008, condition: excellent (used), We offer a KRONEN GEWA 3800V PLUS vegetable washing machine (year 2008, 6.3 kW, 3×400 V) complete with a KRONEN GE 11 air blow-off unit (year 2008, 2.2 kW, 3×400 V, 50 Hz) a professional, continuous washing and dewatering solution for lettuce, vegetables, herbs and fruit. The GEWA 3800V PLUS is a universal washer for pre-washing, washing, disinfecting, mixing and rinsing both cut and whole products such as baby leaf, iceberg, vegetables, herbs and fruit. It uses KRONEN’s HELICAL washing system, where the product travels through the wash tank in a spiral water flow up to ten times the tank length. This ensures thorough yet gentle cleaning, optimal product distribution and significantly reduced water consumption compared to conventional flotation washers. Floating and sinking products are conveyed through the tank by the helical water flow. At the end of the tank, product and water overflow to the vibration outfeed, where the product is sprayed with fresh water and pre-dewatered, while the water is filtered and returned to the pump tank for reuse. A built-in sand trap separates heavy dirt such as sand and small stones at the bottom of the tank, preventing it from returning to the product flow. Hodpfxeytthms Ak Dol The machine is built entirely from AISI 304 stainless steel with excellent hygienic design and easy access for cleaning and maintenance. All pipes, pump casing, wash and pump tanks and covers are stainless steel; in the PLUS models with vibration outfeed there are no screws in the product area, which further improves hygiene. The set includes a KRONEN GE 11 air blower (2008, 2.2 kW, 3×400 V, 50 Hz), designed to blow off water from the product surface after washing. Placed after the washer, it improves dewatering, reduces the load on subsequent centrifuges/dryers and enhances shelf life and appearance of the final product. Technical specification KRONEN GEWA 3800V PLUS Manufacturer: KRONEN GmbH Model: GEWA 3800V PLUS (with vibration outfeed) Year of manufacture: 2008 Max. capacity: up to 2,500 kg/h (depending on product and dwell time) Power: approx. 6.3 kW, 3-phase Voltage: 3×400 V, 50 Hz Tank volume: approx. 800 l (GEWA 3800 PLUS series) Material: AISI 304 stainless steel – pipes, pump casing, wash and pump tanks, covers Outfeed: vibration outfeed with fresh water spray and pre-dewatering Function: continuous pre-washing, washing, disinfection, mixing and rinsing of cut and whole lettuce, vegetables, herbs and fruit Washing system: HELICAL spiral washing system with adjustable water flow Features: Sand trap sedimentation unit for heavy particles Reduced water consumption through recirculation and filtration Compact, modular design – easy integration into processing lines Technical specification KRONEN GE 11 air blow-off Model: GE 11 air blower Year of manufacture: 2008 Function: air blow-off / dewatering after washing – removes surface water from product Power: 2.2 kW Voltage: 3×400 V, 50 Hz

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Horizontal glass washing machine BAVELLONI HW 2200 Year of production: 2022 Maximum glass working width: 2200 mm 3 pairs of brushes (6 pcs.) Hodpsytgi Djfx Ak Del As new condition ! Very little used ! Available immediately

Condition: new, functionality: fully functional, Basket Washing Machine MRS - WASH 1200 Application: The device is designed for washing components of various sizes and weights. The washer is equipped with a mechanically driven rotary basket powered by a motor and spray nozzles. Operating Description: After switching on the main power, the bath heating process begins. Once the set temperature is reached, the washing cycle can be started. The primary washing phase is the first step, and its duration can be continuously adjusted using the timer located in the control box. When the set time elapses, the bath will end automatically. STANDARD EQUIPMENT OF THE WASHER: * Safety cover switch that disconnects during opening in the washing process * Liquid level sensor in the tank preventing dry operation * Temperature sensor * Single spray arm * Mechanically rotated basket * Double filtration system Hedpjxnlpdsfx Ak Dol * Coarse mesh filter for insoluble contaminants (1mm mesh) * Drain valve Technical Data: Basket diameter: 1200mm Working height: 500mm Basket capacity: 300kg Working time programmability: 0-99 min Washing temperature: 60°C Heater power: 12kW Tank capacity: 400l Spray performance: 200l/min Spray working pressure: 4.5bar Overall width: 1750mm Overall depth: 1750mm Overall height (closed/open): 1250/2400 mm Power supply: 3~400V OUR OFFER INCLUDES OTHER MODELS OF AUTOMATIC BASKET WASHERS FROM THE MRS WASH SERIES WITH SIZES 800, 1000, 1200, 1500, AND EVEN 1500 XL. PLEASE CONTACT US FOR OFFERS ON OTHER MODELS.

Condition: new, functionality: fully functional, warranty duration: 12 months, total width: 1,750 mm, total length: 1,750 mm, total height: 1,700 mm, type of input current: three-phase, The HYDRO WASH 1200 2-in-1 automatic basket washer is a multifunctional device, enabling fully automatic cleaning of parts in a motor-driven rotary basket. For parts with more complex shapes, high-pressure washing at 140 bar is available. Thanks to the combination of these processes, this machine is versatile and can be used in any workshop. It is particularly suited for companies specializing in turbocharger, steering gearbox, and transmission refurbishing, significantly streamlining workflow. To ensure user safety and stable washing parameters, an electronic control panel and a range of integrated sensors are employed. Operating principle: Before the first use, fill the tank with washing fluid. The recommended fluid is a solution of MRS Cleaner Strong concentrate and water in the specified ratio. The Hydro Wash offers both manual and automatic washing modes. a) To activate automatic washing, prepare the device (fill with water and concentrate), close the metal glove cover, close the washer lid by simultaneously pressing two buttons (located at the front and rear of the device), and press the start button. *Basket rotation possible when the lid is open by pressing the right pedal button or simultaneously pressing the two buttons at the front and rear. The condition is that the metal glove cover must be closed.* b) To activate manual washing, close the washer lid by pressing the two buttons (front and rear) simultaneously. Open the metal glove cover and press the left pedal button. STANDARD EQUIPMENT: - Lid interlock sensor for safety when opened during washing - Liquid level sensor to protect against dry operation - Liquid temperature sensor - Adjustable spray arms with nozzles made from stainless steel by Spraying System - Mechanically driven rotary basket - High-pressure pump (140 bar) - Compressed air gun - Pressure regulator with water separator - Coarse mesh filter for insoluble contaminants (0.8 mm mesh size) - Fine filter for contaminants - Adjustable feet - Drain valve - Pneumatic cylinders Technical Data: - Basket diameter: 1200mm - Working height: 500mm - Basket load capacity: 300kg - Programmable cycle time: 0–99 min - Washing temperature: 60℃ - Heater power: 12kW - Tank capacity: 400l - Spray rate: 200l/min - Working spray pressure: 4.5–6 bar - Manual washing pressure: 140 bar - Overall width: 1750mm - Overall depth: 1750mm - Overall height: 1700mm (2450mm with lid open) - Power supply: 3~400V Optional equipment: - Belt oil skimmer - Low-pressure lance kit - Reinforced pump OTHER DIMENSIONS OF HYDRO WASH 2-IN-1 WASHERS AVAILABLE! MODELS 800 AND 1000 ALSO IN STOCK. CONTACT US FOR DETAILS ON OTHER MODELS. Hsdexm Ullopfx Ak Dol

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 2600/016GR.2 W-4667, Industrial washing machine Pero 2600 No. 2600/016GR.2 W-4667 Year of manufacture: 1991 Temperature of the washing and rinsing belt: 65–80°C Hsdow Dhqljpfx Ak Djl Simatic S5 control system

Condition: new, Year of construction: 2026, functionality: fully functional, working height: 2,200 mm, BUMEX Sp. z o.o. offers a professional industrial washing system designed for the preparation of components prior to the powder coating process. The equipment has been engineered for demanding industrial environments where washing efficiency, process stability, and long-term durability are essential. The washing system enables effective preparation of steel and aluminum components through a multi-stage cleaning, degreasing and rinsing process. Technical parameters Working chamber dimensions: 1500 × 3200 × 2200 mm Process technology: 3-stage washing process Process tanks The unit is equipped with three process tanks: tank for cleaning / degreasing chemicals tank for rinsing water tank for demineralized water (DEMI water) Tank capacity: 1500 – 2000 liters DEMI water generator The system is equipped with a demineralized water generator, ensuring high-quality final rinsing and optimal surface preparation before powder coating. Heating system The chemical tank is equipped with a heating system for the process liquid. Available heating options: oil heating gas heating electric heating Maximum operating temperature: up to 60°C Machine construction The machine is manufactured entirely from high-quality stainless steel AISI 1.4301, which provides: excellent chemical resistance long service life easy maintenance and cleaning The washer features: very robust industrial construction full thermal insulation of the entire machine to reduce energy losses spray system designed for minimal mixing of process liquids pre-filter for collecting contaminants Hsdpfehfv D Ssx Ak Dol high washing efficiency Control system The machine is equipped with a fully automatic control system, enabling precise control of: process temperature pump operation washing time sequence of process stages Why choose BUMEX? Our equipment stands out on the market due to: very high manufacturing quality robust industrial construction operational safety complete technical documentation possibility of adapting the equipment to the existing production facility All machines manufactured by BUMEX Sp. z o.o. are CE certified. Additional technological support BUMEX also provides: powder coating booths dust extraction and filtration systems industrial ventilation systems professional technological consulting Cooperation conditions company transport available (price determined individually) VAT invoices issued short production lead times possibility of manufacturing machines in custom configurations and dimensions

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm Hjdpfx Asdzp Tcek Dsl installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: used, Year of construction: 1991, pressure 125 t distance between columns 2100 mm stroke 1000 mm dayligth 1300 mm table surface area 2230 x 1300 mm die cushion capacity 63 t die cushion stroke 60 mm die cushion area 1000 x 900 mm table height over floor 1050 mm Hodpfxovut D Te Ak Djl ram surface 2100 x 1000 mm feed down 50 mm/sec feed up 50 mm/sec working feed 10 mm/sec oil volume 410 l power requirement 22,0 kW weight 31,0 t required space 3,1 x 1,7 x 5,95 m hydraulic try-out press permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table and ram, hydraulic ejector in table, ram interlocking, two-hand operation No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, functionality: limited functionality, total width: 1,800 mm, total length: 1,195 mm, total height: 1,400 mm, empty load weight: 400 kg, electrical fuse: 16 A, input frequency: 50 Hz, input voltage: 400 V, power: 3 kW (4.08 HP), funnel diameter: 700 mm, working height: 1,400 mm, ejection height: 1,000 mm, conveyor belt length: 1,000 mm, type of input current: three-phase, DGUV certified until: 03/2027, overall weight: 400 kg, Kemper Consul weighing machine - ET LED display for weight adjustment with central lubrication Hsdpfx Aox Rat Esk Djl Foldable hopper Mobile machine Mehler conveyor belt Discharge conveyor belt, long and height-adjustable Connection 400V, 16A-CEE plug Used machine We have many more bakery machines in stock!

Year of construction: 2000, condition: ready for operation (used), A Hobart pass-through crate washing machine is available. Heating type: steam, steam pressure: 8.5bar, pass-through width: 612mm, pass-through height: 440mm, washing goods: sheets, sheet dimensions X/Y: 650mm/600mm, throughput capacity: approx. 75sheets/h, infeed length: 350mm, outfeed length: 1100mm. Documentation available. An on-site inspection is possible. Hedsyq R E Dopfx Ak Dol

Condition: reconditioned (used), functionality: fully functional, total width: 1,780 mm, total length: 850 mm, total height: 1,800 mm, empty load weight: 900 kg, electrical fuse: 16 A, input frequency: 50 Hz, input voltage: 400 V, type of input current: three-phase, DGUV certified until: 03/2027, year of last overhaul: 2026, overall weight: 900 kg, TOP dough divider/weigher Kemper Imperator II Output: up to 1,500 pieces per hour With manual control Mechanical flour duster With central lubrication Safety cut-off Machine in stainless steel design Connection: 400V, 16A CEE plug Dimensions: 1790 x 850 x 1800 mm (W x D x H) Refurbished used machine With warranty + spare parts service Option: Maintenance contract Spare parts box Hsdpfjx I U Huex Ak Dsl Service package Delivery service Commissioning & instruction We have additional TOP dough dividers in stock!

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 21/9/0619, Ultron UNPRZ-500 MPS Washing Machine No. 21/9/0619 Year of manufacture: 2022 Temperature control range for washing and rinsing: 20–80°C Maximum drying temperature: 100°C Usable tunnel height: 300 mm Width: 500 mm Washing heater capacity: 45.6 kW Rinse heater capacity: 53.2 kW Drying unit output: 24 kW Hodow Dhrvjpfx Ak Dsl Dryer blower output: 26 kW Rated power: 185 kW Weight: 4000 kg

Year of construction: 2015, condition: good (used), For Sale: Nawi Stainless Steel Bin Washing Machine Make: Nawi Year of Manufacture: 2015 Specifications: - Completely stainless steel - Steam heated - Equipped with infeed conveyor belt, width 1100 mm - Tilting device with infeed guide - Discharge screening system - Central control cabinet with touchscreen operation - Wash chamber dimensions: 2500x1700x1300 mm - Infeed + outfeed If you have any questions or comments, please feel free to contact us. Price includes disassembly Loading is included. Transport by arrangement Hodpoyiyxksfx Ak Dsl Inspection possible on site. Kind regards, Leo Holland

Year of construction: 1995, condition: used, We are offering this used Fornax BOT-4000 burnout furnace, year of manufacture 1995. Type: BOT-4000 With Ebel count: 6 Year of manufacture: 1995 Manufacturer number: 600072703 Voltage: 3×400-N-PE V Power: 31.5 kW Current: 46 A Usable chamber volume: m³ Hsdpsynwzysfx Ak Del Total chamber volume: m³ Minimum exhaust flow at 20 °C: 140 m³/h Varnish drying: Maximum drying temperature: 175 °C Maximum burnout temperature: 370 °C Maximum varnish content: 10,000 g Maximum metal content: 1,500 kg Protection class: IP54 If you have any questions or require more information, feel free to send us a message or call us.

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Jeros mod 8150 barrel / bin washer year of construction 2015. Capacity 2x barrels at the time. Hjdpfx Akoyitwys Djl

Condition: used, Year of construction: 2014, functionality: fully functional, EVO System all-in-one washing line, currently in use in our plant, year of manufacture: Dec 2014 Max plate dimensions: 132x203.2 cm Touchscreen for automatic/manual control 8 independent automatic drying drawers UVA exposure system 8 drawers for stacking Hjdpfx Asymyhyek Del Total dimensions: Washout unit: 426 x 227 x 167 cm (167.7 x 89.4 x 65.7”) Exit table for plate: 274 x 227 x 167 cm (107.8 x 89.4 x 65.7”) Dryer: 277 x 228 x 227 cm (109 x 89.7 x 89.3”) Exposure/Stacker: 458 x 228 x 227 cm (180.3 x 89.7 x 89.3”)

Condition: used, mileage: 288,500 km, power: 265 kW (360.30 HP), first registration: 04/2011, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2026, color: grey, gearing type: automatic, Equipment: ABS, air conditioning, compressor, parking heater, MB Actros 2536 Horsetruck for 6 Horses with Pop-Out The vehicle shows signs of use. 6 horse stalls, side and rear ramps, pop-out, underfloor storage beneath living area, storage compartments all around the truck, fresh water and waste water tanks, 6 sleeping berths, living room, video surveillance and temperature monitoring for the horse section, LG stationary air conditioning unit, auxiliary heater, TV/Sat, high-quality wood finishes, bathroom with shower and toilet, air conditioning, kitchen, leather seating area, microwave, refrigerator, external tack compartment, cruise control, alloy wheels, air suspension, trailer hitch, and much more. Errors/omissions and prior sale reserved. * NET SALE POSSIBLE. * Top leasing offers available. Hjdpfx Aex Ambqok Dsl Location and vehicle inspection: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service for all brands in the area of horse transporters and trailers. Please schedule an appointment in advance with Richard Theurer or Andreas Theurer.

Condition: used, Automatic cutting, brushing & washing, drying, made RSA Entry length: 12.000mm Exit length: 30 - 1.000 mm Hedpfx Akoymarls Dol In packed condition – ready to be delivered. Entry length: 12.000mm Exit length: 30 - 1.000 mm Diameter: 12 - 80 mm

Condition: used, RSA center for high-performance cutting, deburring, cleaning, drying and stacking for steel and stainless steel tubes. Scope of Supply: - 1 RSA high-speed precision saw model RASACUT NC 1500 - 1 Transfer system between the RASACUT precision saw and the RSA tube feeding system 1500 - 1 RSA tube feeding system 1500 - 1 RSA cleaning system RASACLEAN ET 1500 Including: - 1 RSA drying system TURBODRY - 1 RSA RASAPORT 1500 PR system High production High precision Very short setup times Hedpfoymapqox Ak Del Easy handling Easy machine connection RSA High performance Saw RASACUT TWIN NC 1500: Fast and Precise Round diameter: from 10 to 40 mm Square size: from 10x10 to 40x40 mm Wall thickness: from 1 to 3 mm Material: steel and stainless steel Original lengths: 6,200 mm Fixed length cutting and deburring: from 200 to 1,500 mm Round diameter: from 10 to 40 mm Square size: from 10x10 to 40x40 mm Wall thickness: from 1 to 3 mm Material: steel and stainless steel Original lengths: 6,200 mm Fixed length cutting and deburring: from 200 to 1,500 mm

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer BRINOX d.o.o. Project Number B-0001113-LEP2.3 LEP 2.3 KK6762 Package 9 Module M024 Product Description LEP2.3 – Wash Solution Temperature Control Unit Serial Number 1003572 Equipment Number 20022782 Tag Number MR-INH-VPR61-KK6762 Year of Manufacture 2020 Technical Data System Type Pharma temperature control skid for precise temperature regulation of wash and elution solutions. Constructed as a compact, multi-level stainless steel frame design with fully integrated pump, heat exchanger, and valve technology. Dimensions Length 1920 mm Width 1365 mm Height 1840 mm Design Fully pre-assembled, insulated temperature control skid Pharmaceutical design according to GMP requirements Industrial stainless steel frame construction Materials Product-contact parts: Stainless steel 1.4435 / 1.4571 Frame construction: Stainless steel 1.4301 Welds as per EN ISO 13920 D Insulation Completely insulated piping and equipment Closed-cell high-performance insulation with black protective sheathing Main Components PU1021 Process Pump PU9203 Chilled Medium Pump WT1001 Plate Heat Exchanger WT1011 Finned Tube Heat Exchanger BH9701 Expansion Tank Pneumatic Control Valves GEMÜ Stainless Steel Ball Valves Pressure Transmitters Temperature Measurement Points Pressure Gauges Electrical Junction Box with Warning Labels Stainless Steel Cable Trays Media Chilled Brine Supply / Return Wash Solution Process Medium Control Air 6 bar All media connections sealed at factory and packaged securely for transport. Leak Testing Performed as pressure test with compressed air. DP-01 Medium: Compressed Air Test Pressure: 3.15 bar Pressure Drop: 0.13 bar Date: 27.07.2020 Result: Passed DP-02 Medium: Compressed Air Test Pressure: 3.28 bar Pressure Drop: 0.07 bar Date: 26.07.2020 Result: Passed Pressure holding time: 1 hour each No leaks detected Calibration Certificates Calibration Laboratory: LOTRIČ Metrology Certificates according to EN ISO/IEC 17025 Measurement Ranges: –1 to 20 bar and 0 to 10 bar Calibration performed Documentation Scope FAT Plan and Report Deviation Report Layout Drawing Check Maintenance Inspection P&ID Leak Test Report Calibration Certificates Works Certificate 2.1 EN10204 Material List As-Built Isometrics Complete Turn-Over Package Inspection Status FAT performed Pressure test passed Calibrations available PED-compliant design Pharma documentation complete Application Temperature control of wash and elution solutions in biopharmaceutical production facilities Hedpfx Asyl Iwtek Djl Suitable for GMP environments Condition New system Original packaging Unused Year of manufacture: 2020 Factory condition Fully documented Immediately available

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Type: LEP2.3 – Wash Solution Temperature Control Unit Year of Manufacture: 2020 Serial Number: 1003507 LEP2.3 KK6761 Package 8 Tag No.: MR-INH-VPR61-KK6761 Equipment No.: 20023781 Technical Data System Type: Temperature control unit / heating and cooling module for wash solution (CIP or process washing system) Design: Compact, fully pre-assembled skid unit in robust stainless steel frame construction, crane-liftable via integrated lifting points. Frame and Construction: Welded stainless steel construction in industrial design, free-standing, multi-level piping configuration for optimal space utilization. Maintenance-friendly access from multiple sides. Integrated cable trays. Piping: Stainless steel process piping in hygienic design, welded and partially flanged. Multilayer thermal insulation of main lines and apparatus. Integrated drain and vent fittings. Valve Technology: Multiple manual ball valves (GEMÜ) in main and bypass circuits. Pneumatically actuated control and shut-off valves for automatic temperature regulation. Diaphragm and control valves integrated in the heating and cooling circuit. Instrumentation and Control: Temperature measurement points in both supply and return lines. Pressure sensors in the process section. Integrated flow measurement. Electrical junction box with protective labeling. Automatic temperature control via pneumatic control valve. Heat Exchanger: Cylindrical stainless steel heat exchanger, insulated and integrated into the piping system. Designed for controlled heating and/or cooling of the wash solution in a closed loop. Pump Technology: Two electrically driven centrifugal pumps with red-painted motors for process recirculation within the temperature control unit. Electrical: Electrical junction box with warning markings. Wired sensors and actuators. Prepared for integration into a central PLC or process control system. Application This system is used for precise temperature regulation of a wash solution within a pharmaceutical or biotechnological process system. Typical areas of application include CIP systems, production plant washing stations, and temperature-controlled cleaning processes in the pharmaceutical and biotechnology sectors. The wash solution circulates in a closed loop via pumps, is temperature controlled by the integrated heat exchanger, and continuously monitored by sensors. Temperature is regulated automatically via pneumatic control valves to maintain defined setpoints accurately. Construction Compact modular skid design with fully insulated main lines. Stainless steel surfaces in hygienic industrial finish. Clearly organized media routing and structured piping layout. Crane-transportable via integrated lifting points. Hsdpfoyl It Iex Ak Dsl Condition Year of manufacture 2020. Very good visual and technical condition. Professional execution in pharmaceutical plant engineering. FAT / Documentation Typically supplied with CE conformity, Factory Acceptance Test (FAT), and technical documentation including P&ID diagrams and material certificates for product-contacting components. Special Features Fully insulated temperature control module in a compact, high power density design. High-quality valve technology (GEMÜ). Multiple integrated measurement and control points. Suitable for validated pharmaceutical processes. Industrial, pre-assembled skid solution with clearly structured media routing.

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Type: LEP 2.3 – Washing Solution Temperature Control Unit Year of Manufacture: 2020 Serial Number: 1003561 Tag No.: MR-INH-VPR61-KK6751 Equipment No.: 20022779 Location: Germany Condition: New, unused, original packaging Technical Data System Type: Washing Solution Temperature Control Unit (Temperature Control Skid) Design: Compact, pre-assembled skid unit in stainless steel frame Frame Material: Stainless steel Insulation: Completely insulated piping and components Pumps: Two circulation pumps with electric motors Stainless steel pump housing Inline design Heat Exchanger: Integrated stainless steel heat exchanger Shell and tube or jacketed tube design Valves: Multiple GEMÜ ball valves Stainless steel valves Pneumatic control valves Safety valves Instrumentation: Pressure transmitter Pressure gauges Temperature measuring points Integrated flow measurement Electrical: Integrated control cabinet or terminal box Ready-wired for connection Industrial standard components Piping: Stainless steel process pipelines Fully insulated Flange and clamp connections Transport: Forklift- and crane-compatible Heavy-duty stainless steel base frame Application The temperature control unit is designed for controlled temperature regulation of a washing solution in pharmaceutical or chemical processes. Suitable for CIP and washing processes, pharmaceutical production lines, chemical processing plants, as well as temperature-controlled media circuits. Construction Compact, modular skid design Pre-assembled and ready to connect High-quality stainless steel construction Industrial-grade quality components, including GEMÜ valves Service-friendly design Hsdpsyl Ib Ejfx Ak Dol Condition New system Never used Original packaging Direct from manufacturer’s project Immediately available FAT and Documentation Status Technical documentation available Project documentation available Drawings available P&ID available Component lists available Operating manual available Special Features Completely insulated process piping High-quality stainless steel construction Premium industrial components Ideal for new projects or as a replacement/redundant unit Immediate integration possible

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: A-200711, total length: 2,450 mm, total width: 780 mm, total height: 1,150 mm, input voltage: 220 V, A washing system for anilox rollers and sleeves is for sale. Further information can be found in the photos. Hjdpoww Tzijfx Ak Del