Used Walter Heli for sale (70)

Condition: ready for operation (used), Walter Fielenbach - Centrifuge F25 -Payload: 25 kg -Drum volume: 35 liters -Drum wall: 3 mm steel -Speed: 980 rpm -Motor power: 4.5 kW -Drive power: 1.5 hp -Material: SM steel Kdedpfx Ahezta U Sobeu Dimensions: L x W x H 0.9 x 0.9 x 1.2 meters / Weight 300 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, throat depth: 455 mm, total width: 860 mm, total length: 2,000 mm, total height: 2,050 mm, sheet thickness aluminum (max.): 8 mm, overall weight: 2,000 kg, sheet thickness steel (max.): 4 mm, Number of strokes 150 / 300 / 600 Min. Maximum sheet thickness 6 mm Horizontal troath 675 mm Vertical troath 455 mm Max. thickness Stainles 4 mm Max. thickness Aluminium 8 mm Kjdpfx Ahszxf Eysbsdu Motorised ram adjustment 0 - 80 Power 4.5 kW Dimensions (Estimate) Length 2000 mm Width 860 mm Height 2050 mm Weight 2000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1990, Power: 1.000 kN Size of bolster: 800 x 750 mm Distance betw. columns: 900mm Kdsdpfxoz Atv Ie Ahbsu Size of ram: 800 x 600mm Daylight: max. 800 mm Stroke: 480 mm Speed: Fast down: 300 mm/s Working: 30 mm/s Fast up: 300 mm/s Electric power total: app. 31 kW Weight: app. 13.000 kg Size of footprint: app. 1,6 x 2,90 x 3,8m (T x B x H) • die cushion, activ, 400kN, stroke 200mm • allowed for 2-hand working • equipped by oil - air chiller • ram guiding by 4 pc. hard chromed Guiding columns

Condition: excellent (used), Year of construction: 1988, total width: 810 mm, total length: 1,700 mm, total height: 1,700 mm, overall weight: 1,250 kg, Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening Machine equipped for tooling: FWR1307 FWA 1306 FWA 802T FWA 1002T LFA 120S LFA155T Number of strokes: 300 / 600Min. Maximum sheet thickness:4.0mm Horizontal troath: 460mm Vertical troath: 475mm Max. thickness Stainles:2.0mm Max. thickness Aluminium:5.0mm Motorised ram adjustment:0 - 60 Power: 3.0kW Length: 1700mm Width: 810mm Height: 1700mm Kdedpfezzmtkjx Ahbju Weight: 1250kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2023, type of input current: three-phase, Walter TD500 KBA prism machine for sale. It was only unpacked for the photo and has never been operated. Purchased for a new production line that was never realized. Lower motor 22kW, upper motor 18.5kW. Can be tested on site. Kdsdpfx Ahsy Sw T Sebeu

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, WALTER TYPE: TANIH320EVO Year of manufacture: 2014 Ksdeyllx Ispfx Ahbjdu Faceplate diameter: 500 mm

Condition: not inspected (used), Year of construction: 2000, Brand: Walter Model: Woodtronic CNC6F Year of manufacture: 2000 Sold as-is, machine for production or resharpening of the sides of carbide-tipped saw blades. - Diameter range: 80 to 800 mm Kdsdpfoytn Syjx Ahbou - SIEMENS 840DI CNC control - CNC axes Siemens Simodrive 611 - Automatic blade measurement and grinding wheel compensation - Variable spindle speed Images are for reference only.

Condition: used, Panning machine, Coating pan machine,Pralines and Drages, Used Machine Manufacturer: Walter Brucks Type: I Overall dimensions: 1200 x 1380 x 1800 mm Weight: 280 kg Kjdpfx Asypvhzjhbodu Electrical data: 400 V, 3 A Pan size: 1200 mm Ø x 650 mm Pan opening: 740 mm Ø Capacity / mixing: approx. 150 kg

Condition: not inspected (used), Year of construction: 2000, Brand: Walter Model: Woodtronic CNC 5D Kdodpfxjyuutyj Ahbju Year of manufacture: 2000 Carbide saw blade sharpening machine Condition: will be fully refurbished Used 7-axis CNC for face and back grinding - Diameter: 80 to 850 mm - Cross indexing table - SIEMENS MMC103 CNC control - All tooth geometries supported - Numerous options Pictures for reference only.

Condition: used, functionality: fully functional, - Polish production Kdedpfx Aheq Rc Rlsbou - DTR (Technical Documentation / Operation Manual) - Maximum length of processed material: 2800 mm TECHNICAL PARAMETERS: - Minimum length of cut prism: 600 mm - Maximum thickness of cut prism: 110 mm - Maximum width of input material: 450 mm - Maximum width of finished board: 150 mm - Minimum width of finished board: 70 mm - Saw blade diameter: 400 mm - Output capacity up to: 20 m³ - Power of right vertical spindle motor: 3.5 kW - Power of left vertical spindle motor: 3.5 kW - Rotational speed of vertical saw drive motors: 2850 rpm - Power of horizontal saw motor: 22 kW - Rotational speed of horizontal saw drive motor: 2850 rpm - Rotational speed of feed drive motor: 1450 rpm - Feed speed (stepless adjustment): 0 - 20 m/min - Supply voltage (50 Hz): 3×400 V - Machine dimensions (L/W/H): 7250 / 1700 / 1600 mm - Transport dimensions (L/W/H): 4700 / 2400 / 1600 mm - Machine weight: 1300 kg

Condition: ready for operation (used), Year of construction: 1995, A custom-built multi-stage nonwoven line for the production of two-layer or multilayer technical nonwovens made of synthetic or natural fibers with free-flowing materials such as herbs or seeds is available. Material weight range: approx. 100g/m²-1000g/m², needle machine manufacturer: Dilo, max. roll width: 2100mm, max. production speed: 200m/h, needling capacity: approx. 1200strokes/min, main motor: 45kW Siemens, total system dimensions X/Y/Z: approx. 10m/4.5m/4.5m. Process steps: nonwoven web feeding, carrier nonwoven feeding, material feeding (herbs), material dosing, material distribution, top nonwoven laydown, needle station, cutting/to length cutting, winding/rewinding, dust extraction. Documentation available. An on-site inspection is possible. The line is complete including accessories, peripheral equipment and a small sample needle machine. Kdjdpeyt N Dqefx Ahbju

Condition: good (used), Year of construction: 1981, functionality: fully functional, We are selling our Walter UWS 20 AY. Kedpfew A Rtyex Ahbsdu

Condition: excellent (used), Year of construction: 2004, operating hours: 53,676 h, machine/vehicle number: 730301, saw blade diameter: 810 mm, tooth pitch: 4 mm, grinding wheel diameter: 200 mm, total width: 2,074 mm, total length: 3,870 mm, total height: 2,725 mm, type of input current: three-phase, input current: 5 A, year of last overhaul: 2025, input frequency: 50 Hz, grinding spindle motor power: 1,500 W, input voltage: 400 V, overall weight: 2,200 kg, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, coolant pump power: 500 W, feed length X-axis: 350 mm, feed length Y-axis: 350 mm, feed length Z-axis: 250 mm, grinding spindle speed: 3,000 rpm, workpiece weight (max.): 2,800 kg, The machine is in working order and has a valid inspection certificate until 2025. It has been modified to work in conjunction with a Comat machine (an oil coolant cleaning system that manages 4 machines and contains 1100 liters of oil). It is also possible to switch to the internal 175-liter tank. The machine is also equipped with a filter to eliminate oil mist. Kdodpfxozyc Uns Ahbju All work invoices for the machine, performed by Walter’s technicians, are available.

Condition: used, Year of construction: 1986, grinding length . mm grinding width . mm workpiece height . mm Table 870x130 mm total power requirement 2,5 kW Ksdpfxeytx Ifj Ahbjdu weight of the machine ca. 0,8 t dimensions of the machine ca. 2x1x2 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: not inspected (used), Brand: Walter Model: Woodtronic CNC5 with 2-pallet loader Year of manufacture: 2000 Sold as is. Used 8-axis CNC carbide saw blade grinding machine for face and back grinding, with linear loader (2 stations). Kodexm T Huepfx Ahbodu Diameter range: 80 to 850 mm - Standard measuring probe for recording and managing grinding parameters - SIEMENS MMC103 CNC control - All tooth geometries 2-pallet loader - Blade diameter up to 600 mm - Magnetic pins Options available on request Contractual photos

Condition: good (used), min. width of the middle prism after cutting 55mm Kdsdswmg Saopfx Ahbju minimum length of the cut shaft 1270mm maximum diameter of the cut shaft 350mm shaft diameter 60mm diameter of the circular saw 500mm smooth regulation of the feed speed on the inverter power of the lower spindle drive motor 45kW power of the upper spindle drive motor 37kW power of the feed drive motor 1.50kW

Condition: excellent (used), Feeding table 6 m Kdjdpfx Ahsxz Umxsbju stepless saw spacing adjustment, variable feed speed, 2x long-body motors, each 3.5 kW. Maximum workpiece width: 700 mm Maximum cutting width: 460 mm Maximum cutting height: 140 mm Minimum workpiece width: 70 mm

Year of construction: 1963, condition: ready for operation (used), Max. forming force: 80t, connected load: 3.5kW, current type: 3 phases, frequency: 50Hz, operating voltage: 380V, control voltage: 24V, rated current of the machine: 10A, rated current of the supply fuse fast-blow: 25A, slow-blow: 15A, weight: 1.79t. With documentation, without accessories or spare parts. Regularly maintained, machine has a defect, the speed adjustment no longer functions fully. An on-site inspection is possible. Kdsdpfey A Smbex Ahbou

Condition: used, table diameter 400 mm table load . t table height . mm The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale; our terms and conditions of business and sale apply exclusively. About us More than 400 of Ksdpfszc Rtfjx Ahbodu our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find more offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Walter Technic Compressor Model: SKTG 5.5 PP Kombo Dryer, Automatic condensate drain, Tank: 500 litres, Pressure: 10 bar, Kdodpfxoy Nlwts Ahbsu Capacity: 700 litres per minute, Weight: 505 kg.

Condition: excellent (used), Rotary table, manufacturer: Walter Type: RT 630 MP Heidenhain digital display Resolution: degrees-minutes-seconds Clamping surface diameter: 630 mm Height in horizontal position: 180 mm Height between centers in vertical position: 460 mm Motor: 400 volts, 1300 rpm Rotary table speed: 1.37 rpm Ksdpfx Aezk A U Aohbsdu Transport dimensions: Length: 1050 mm Width: 500 mm (with pallet: 800 mm) Height: 1220 mm Weight: 915 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, saw blade diameter: 850 mm, saw blade bore: 10 mm, TECHNICAL DETAILS Kedpfx Aeypbx Eohbjdu Saw Blade Diameter (without loader): 80 – 850 mm Saw Blade Diameter (with loader): 250 – 450 mm Bore Diameter (from): 10 mm Saw Blade Magazine: Up to 40 pieces Control and Software Control: Industrial PC with Siemens standard PLC Software: For all tooth geometries, including special profiles Grinding Process Sequence 1st Step: After starting, the vacuum gripper picks the top saw blade from magazine 1 and transfers it to the Woodtronic NC4; the cover opens. 2nd Step: Loader returns. The Woodtronic NC4 closes and the grinding program starts. The loader removes the intermediate ring from magazine 1 and loads it into magazine 2. Wait position. 3rd Step: After grinding and opening of the Woodtronic, the loader takes the sharpened saw blade and transfers it to magazine 2. Process Repetition Steps 1 to 3 are repeated until the grinding cycle is complete. Pre-programming possible: The grinding operation continues without interruption, even while programming the next magazine. The Woodtronic NC4 can be preprogrammed during the day and will grind automatically overnight. Measurable with WALTER Saw Check: Rake angles, clearance angles, diameter, number of teeth Tooth geometry: manual input required MACHINE DETAILS Operating hours: 4,197 h (according to previous operator, information unverified) FEATURES - Automatic loader - Walter Saw Check - Measuring device for carbide-tipped circular saw blades

Condition: used, centre height / mm weight 110 kg diameter 400 mm Kdjdoy Suqzopfx Ahbju

Condition: used, centre height / mm O. 600 mm Ksdszcq Euepfx Ahbedu Weight: 340 kg

Condition: used, centre height 160 mm chucking diameter 200 mm Kdjdpszcgb Sjfx Ahbeu hollow 54 mm