Used Heller Bea 2 for sale (73)

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis HELLER MC 16-2 was manufactured in 1999. It features a Siemens control system, a robust tool magazine with 160 slots, and an HSK-63A tool holder. The spindle operates at a speed of 10,000 rpm, ideal for detailed machining tasks. If you are looking to get high-quality milling capabilities, consider the HELLER MC 16-2 machine we have for sale. Contact us for more information about this machine. Pgsdjx D I Alspfx Ahyok

Condition: used, Year of construction: 2019, operating hours: 15,551 h, functionality: fully functional, controller manufacturer: Siemens, controller model: SINUMERIK 840D sl, General Year of manufacture: 2019 Operating hours: 15,551 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 600 mm Maximum cutting circle mm 200 Stroke over center mm 100 Maximum clamping diameter mm 110 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 705 Longitudinal stroke Z-/W-axis mm 705 / 705 Cross stroke X-axis mm 180 Pedewgm Hkepfx Ahyogk Cross stroke X-/U-axis mm 180 / 180 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 700 Tool holder Short cone according to DIN 55026: Size: 8 Theoretical diameter of cone mm: 139,735 Tool drum bearing diameter in the front bearing: 160 mm Chuck mount: 180 mm Chuck diameter up to 260 mm Workpiece spindle bearing diameter in the front bearing: 170 mm Guidance system for machining units: Rolling guides with rollers, size 55 Spindle Maximum power at 100% load: 24 kW Spindle speed: 0-2000

Condition: used, Technical characteristics: HORIZONTAL MACHINING CENTER AUTOFEED 8 PALLETS Pgjdpfx Aj Dvlxohysk 140 TOOL ISO50

Condition: used, Year of construction: 2016, operating hours: 60,000 h, functionality: fully functional, Heller FMS with 2 x H2000 Machine make / type: HELLER H2000 Operating hours: 59,654 Year of manufacture: 2016 Control system: Siemens 840D SL Spindle: PC63 10,000 rpm, 38 kW, 242 Nm Tool clamping system: SK40 Magazine / locations: Chain magazine / 160 locations Convenient operator terminal, setup during machining Rotary table: 360,000° x 0.001° Coolant system: Knoll KF 400/50 bar Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Mechanical Additional options, special features: Drill breakage detection (SBBK); FMS interface, infrared receiver probe (Renishaw), extraction interface; coolant cooler Machine make / type: HELLER H2000 Operating hours: 60,546 Year of manufacture: 2016 Control system: Siemens 840D SL Spindle: SC63 16,000 rpm, 40 kW, 96 Nm Tool clamping system: SK40 Magazine / locations: Chain magazine / 240 locations Convenient operator terminal, setup during machining Rotary table: 360,000° x 0.001° Coolant system: Knoll KF 400/50 bar Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Mechanical Additional options, special features: Drill breakage detection (SBBK); FMS interface, infrared receiver probe (Renishaw), extraction interface; coolant cooler Machine make/type FASTEMS FPC750 with expansion container Operating hours: No counter installed Pgjdpfowbt Rrox Ahyok Year of manufacture: 2016 Control system: FASTEMS Memory locations: 24 memory locations, 2 setup stations Workpiece clamping: Mechanical Additional options, special features: 20 pallets included Further information and technical specifications upon request.

Condition: excellent (used), Year of construction: 2006, Heller MCH 280 C 5 axes Year of manufacture: 2006 Control: Siemens 840 D Psdsy H Hz Uopfx Ahyjgk Spindle speed: 8,000 rpm Travels X: 1000 mm Y: 1200 mm Z: 1100 mm Tool magazine capacity: 400 Tool holder: HSK 100

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2006. It features a maximum spindle speed of 6000 rpm and a robust tool capacity of 100 tools in the automatic tool changer. The machine is equipped with twin pallets, enhancing productivity and efficiency. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. • Twin pallet Technical Specification Podpjy H D T Uofx Ahyegk Taper Size SK 50

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2007. It features a spindle speed of 6000 rpm and a BT50 tool holder. The machine is equipped with an automatic tool changer that holds 100 tools, enhancing productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. Podpfx Aoy Epfvehyogk • 4th axis rotary table, 1-degree indexing • Probe (workpiece/tool probing system) Technical Specification Taper Size BT 50

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets Podpfex Hn D Rox Ahyjgk - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: good (used), Year of construction: 2017, Ref. -No.: 10596 Manufacturer: HELLER Type: H - 2000 Year of construction: 2017 Type of control: CNC-Steuerung Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: 56XXX X-Travel: 630 mm Y-Travel: 630 mm Z-Travel: 630 mm B-Axis: 0,001 ° Table Load: 500 kg Max. Tool Length: 350 mm Max. Tool Diameter: 160 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 80 Turning Speeds: 16000 RPM Tool changer: Doppelgreifer Max. Workpiece height: 850 mm Max. Torque: 95 Nm Rapid Travel X/Y/Z: 60 mm / min Rapid Traverse X-Axis: 80 m / min Rapid Travel Y-Axis: 80 m / min Rapid Traverse Z-Axis: 90 m / min Drive Capacity - Spindle Motor: 40 kW Internal cooling: 50 bar Numbers Of Pallets: 2 Size Of Pallet: 400 x 500 mm spindle running time: 1000 H Operating hours: 3000 H Workpiece interference circuit max.: 720 mm Media interface: 5 - fach Further information: - Equipped with NC rotary table. - State-of-the-art spindle technology. - Ideal for precise machining tasks. - Spindle hours: 1000. Podox Hn D Dspfx Ahysgk - Pallet can be rotated manually 4 x 90 - Hydraulic pressure 200 bar - Quick drill breakage check Machine can be viewed under power by arrangement

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2005. It features an XYZ travel of 800 x 800 x 800 mm and a pallet size of 630 x 630 mm. The machine is equipped with a 100-tool automatic tool changer and a 6-pallet pool for enhanced productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. • Pallet size: 630 x 630 Psdpsy Egbrefx Ahysgk • Tool magazine: 100 ATC • 4th axis: 360° Additional equipment • 6x pallet pool • Probe Technical Specification Taper Size SK 50

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 710 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 52, number of axes: 4, This 4-axis HELLER MCP 250 was manufactured in 2000. It features a maximum spindle speed of 6000 rpm and an automatic tool changer with 52 positions. The machine is equipped with twin pallets and offers an XYZ travel of 800 x 800 x 710 mm. If you are looking to get high-quality machining capabilities, consider the HELLER MCP 250 horizontal machining centre we have for sale. Contact us for further details. • Automatic tool changer (ATC): 52 tools Pgjdpfx Aey Ef D Ejhysk Additional equipment • Twin pallet changer Technical Specification Taper Size SK 50

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 1,100 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: SIEMENS, controller model: 840D sl, total height: 2,800 mm, number of axes: 5, This 5-axis HELLER MC 20 was manufactured in 2012. It features an impressive X-axis travel of 1100 mm, Y-axis travel of 1100 mm, and Z-axis travel of 1000 mm. The machine is equipped with a Siemens 840D sl control unit and has a maximum fixture height of 1980 mm. If you are looking to get high-quality machining capabilities, consider the HELLER MC 20 horizontal machining centre we have for sale. Contact us for further details. Pgsdpoy Dd Hcefx Ahyek • Voltage: 400 V (3~) • Frequency: 50 Hz • Nominal current: 42 A • Interference circle: Ø1260 mm • Maximum fixture height: 1980 mm • Table height from floor: 1100 mm • Suction connection: Ø265 mm Technical Specification Taper Size HSK 100

Condition: ready for operation (used), Year of construction: 2003, operating hours: 54,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 80, number of axes: 4, This 4-axis HELLER MCi 25 was manufactured in 2003. It features a generous X, Y, and Z-axis travel of 800 mm each, along with a B-axis capable of 360° indexing. The machine is equipped with a tool magazine holding 80 slots and supports a total of 6 pallets. If you are looking to get high-quality machining capabilities, consider the HELLER MCi 25 horizontal machining centre we have for sale. Contact us for further details. • B-axis: 360° (indexing/rundtisch) • Tool magazine: 80 slots • Pallet quantity: 6 total (2 in use, 4 standby) • Operating hours: approx. 2,700–3,000 hours per year (counter reported defective) • Total estimated hours: approx. 54,000–60,000 (based on 2-shift operation since 2006) Pgodpfx Aeyzzr Dehysk • Coolant volume: 1,500 liters • Voltage: 400 V • Frequency: 50 Hz • Full load current: 100 A • Connection load: 65 kVA • Status: Fully functional, under power, currently in production Technical Specification Taper Size HSK 63

Condition: used, Year of construction: 2006, x-travel 800 mm Psdjyb S H Repfx Ahyogk y-travel 800 mm z-travel 800 mm Control Siemens 840 D total power requirement --- kW weight of the machine ca. 19,0 t dimensions of the machine ca. --- m

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 830 mm, torque: 80 Nm, controller manufacturer: Siemens, controller model: 840 D SL, table width: 500 mm, table length: 400 mm, spindle speed (max.): 16,000 rpm, spindle motor power: 40,000 W, number of spindles: 1, number of slots in tool magazine: 54, mount diameter: 63 mm, Year of manufacture: 2012 Control: Siemens 840 D SL Spindle: SCT63 16000 rpm, 40 kW, 80 Nm Tool clamping system: HSK 63 Magazine / stations (options): Chain / 54 Rotary table: 360,000° X 0.001° Coolant system: Knoll VRF 250; internal coolant supply 50 bar (work area rinsing) Working area XYZ (mm): 630 / 630 / 830 Pallet size (mm): 500 x 400 Pgodpsywkbgsfx Ahysk Workpiece clamping: 60 bar Additional options, features: Receiver for wireless measuring probe (RENISHAW); Pneumatic support control at the workpiece setup station; Automatic setup process; Automatic removal process; Status indicator light; Scraper belt conveyor for wet machining;

Year of construction: 1985, condition: used, largest surface to be machined: 400 x 300 mm speed of the knife spindle infinitely variable: 1600 - 6000 rpm electrical connection: three-phase current 380 V space requirement: 900 x 800 x 600 mm Pedpfx Ahob Nxdvjyogk

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,000 h, controller manufacturer: SIEMENS, controller model: 840 D, spindle speed (max.): 12,000 rpm, It is a system composed by a HELLER MCH 350 and a HELLER MCH 350 featuring a 22 pallet system with 800x800 pallets. Both models include a 70 bar pressure system, with the MCH 350 reaching up to 12,000 RPM and the MCH 350 C up to 8,000 RPM. Consider the opportunity to buy this HELLER MCH 350 + MCH 350 C horizontal machining centre system. Contact us for more information about this system. Additional equipment • Pallets: 22 of size 800x800 Machine Benefits Technical Machine Benefits Pgsdsx D Skmjpfx Ahyjk • Pressure: 70 bar on both machines • Tool systems: 2 x 234 hsc 100 • Mch 350 c = 8000 rpm Extra Information MCH 300 Usage: 29000 hours MCH 350 C Usage: 22105 hours

Condition: ready for operation (used), Year of construction: 2009, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2009. A horizontal machining centre with a voltage of 400 V, frequency of 50 Hz, and a rated current of 123 A. If you are looking to get high quality milling capabilities consider the HELLER MCH 250 machine we have for sale. Contact us for more information. Pgedpfx Asx D Rh Djhyek • Voltage: 400 V • Frequency: 50 Hz • Rated current: 123 A

Condition: used, Year of construction: 2002, x-travel 630 mm y-travel 630 mm z-travel 630 mm Control Siemens type 840 D size of pallet 400x500 mm numbers of pallets 4 360 ° turning speeds 10-16000 U/min Tool changer 160 Pos. spindle taper: HSK 63 total power requirement 55 kW weight of the machine ca. 11 t Machine with Siemens 840 D control for 4 axes Pgsdeyqt Axspfx Ahyek - Digital drive technology, direct position measuring systems - 4-position pallet changer - Full B-axis - Coolant system with internal coolant supply - Hydraulic workpiece clamping - Filtration system The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, HELLER BEA 7 CNC machining center Control: Siemens Tool holder: SK40 Travel (approx.): X-axis: 630 mm Y-axis: 500 mm Z-axis: 560 mm Spindle speed: up to approx. 6,000 rpm Tool magazine: approx. 40 stations Machine weight: approx. 8,000 kg The machine is of robust construction and is suitable for precise milling and drilling operations in both single-piece and series production. The Siemens CNC control ensures reliable, intuitive operation. Options: With chip conveyor (if available) With tool changer With documentation With various tools With different pallets Pedpfx Aoym Edgohysgk

Condition: used, Year of construction: 2016, operating hours: 60,546 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, nominal power (apparent): 40 kVA, torque: 96 Nm, controller manufacturer: Siemens, controller model: 840D SL, workpiece width (max.): 850 mm, workpiece height (max.): 850 mm, workpiece diameter (max.): 720 mm, workpiece weight (max.): 800 kg, total height: 3,400 mm, total length: 6,300 mm, total width: 2,750 mm, table width: 500 mm, table length: 400 mm, rotational speed (max.): 16,000 rpm, overall weight: 10,000 kg, Machine make/type: HELLER H2000 Operating hours: 60,546 Year of manufacture: 2016 Control system: Siemens 840D SL Spindle: SC63 16,000 rpm, 40 kW, 96 Nm Tool clamping system: SK40 Magazine / slots: Chain magazine / 240 positions Comfort operation terminal, main-time parallel setup Pgsdpfxsyglrqj Ahyok Rotary table: 360,000° X 0.001° Coolant system: Knoll KF 400/50 bar Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 X 400 Workpiece clamping: Mechanical Additional options, features: Drill breakage control (SBBK); FMS interface, infrared probe receiver (Renishaw), extraction interface; coolant chiller

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool holders, and Losma filter system. Documentation available. On-site inspection is possible. Expected to be available from the end of January 2025. Pedpsuxdhujfx Ahysgk

Condition: used, Year of construction: 2002, Technical details: x-travel: 630 mm y-travel: 630 mm z-travel: 630 mm pallet size:: 400 x 500 mm spindle taper:: HSK 63 spindle turning speed - stepless: 10 - 16000 U/min total power requirement: 55 kW weight of the machine ca.: 11 t Pgjdpfxevgmiyo Ahyjk Machine with SIEMENS 840 D control for 4 axis - digital drives - palette changer 4-fold - tool changer 160-fold - coolant device with coolant through spindle - full B-axis - chip conveyor - hydr. workpiece clamping *

Condition: new, Heller Uni Pro ACPU90-S8M E 23 < unused > in sealed original packaging 100% functional Pgedpoi Ea Efofx Ahyjk

Condition: new, Heller SL90 F A 23 slide-in card Uni Pro CNC 90 < unused > in opened OVP 100 % functional Pedpfx Ahsi Ea E Reysgk