Used Vms 300 for sale (26,260)

Condition: used, length 1000 x 600 x 300 mm table load 300 kg total power requirement 1,1 kW weight of the machine ca. ca. 350 kg dimensions of the machine ca. 1,30 x 1,00 x 2,65 m LACHNIT Tilting and Lifting Device Stainless steel column, welded steel container Container dimensions: 1000 x 600 x 300 mm Discharge height: 1.460 mm Control via push-button at column and pendant control panel Podew R Eg Nspfx Adnerd

Condition: new, Year of construction: 2025, Bin capacity: 40 [kg]. Prsdpfx Adsd Nimaenod Capacity: Up to 140 [bulbs/min]. Raw material size: 45 - 140 [mm]. Overall width of device: 1050 [mm]. Total height of the machine: 1880 [mm]. Total length of machine: 4830 [mm]. Number of operating paths: 2 loading height of onion: 1000 [mm] Height of onion pick-up: 700 [mm] Height of waste collection: 400 [mm]. Power supply: 3 x 400 [V] / 50 [Hz] Installed power: 1,2 [kW]. Compressed air connection: 8-10 [bar]. Air consumption: 1,9 [m3/min]. Noise level: Over 80 [dB]. Construction materials: Stainless steel and plastics approved for contact with food CE certificate: yes Cutter: no

Condition: excellent (used), Year of construction: 2018, Biscuit line Capacity - 250-300kg/h Year - 2018 Dough mixer 100kg batch, Biscuit rotary moulder 800mm width, Tunnel oven, wire mesh belt 500mm width, 18m baking zone, 1.5m inlet conveyer and 1.5m outlet conveyer, total 21m, electric, 4 temperature controlled zones with separate control for upper and lower zone, automatic controlled tracking of the belt Prjdpfx Adew Nxvuenjd

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 878 0643, clamping force: 3,000 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, injection weight: 1,090 g, total length: 6,500 mm, total width: 1,900 mm, total height: 2,300 mm, overall weight: 13,800 kg, pressure: 190 bar, pump power: 45,000 W, input frequency: 50 Hz, input voltage: 400 V, input current: 173 A, Equipment: documentation/manual, Machine: Demag Ergotech System Machine type: Injection moulding machine Clamping force: 3000 kN Screw diameter: 70 mm Stroke volume: 1212 cm³ Injection pressure: 1877 bar Shot weight: 1090 g Overall length: 6.5 m Pedpfsw U Dp Dex Adnjrd Overall width: 1.9 m Overall height: 2.3 m Total weight: 13,800 kg Pump output: 243 l/min Pump drive: 45 kW Installed total power: 64–72 kW Pressure: 190 bar Connection: 3 × 400 V, 50 Hz, 173 A

Year of construction: 1980, condition: good (used), - Horizontal sieves - 30 filter plates - Filter area : 6 m2 Pedpfemn I Nxsx Adnord - Max, operating pressure : 6 bar - Capacity : 30 - 120 hl/h - With semi-automatic cleaning Dimensions : - Length : 1800 mm - Width : 850 mm - Height : 2000 mm

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle power : 2.2 / 3.7 [kW] - Spindle speeds : 8000 [rpm] - Max. turning diameter : 60 x 60 [mm] UPPER RIGHT TURRET Prodpfx Adowdad Doned - X/Z stroke : 300 x 285 [mm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 10 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2422 x 1957 [mm] - Machine height : 2430 [mm] - Machine weight : 2200 [kg] EQUIPMENT - CNC : DMG MORI COMPACT LINE (Fanuc 0i-TF) - Electronic handwheel - Coolant tank - Parts catcher - Workpiece loading robot - Electric transformer

Condition: good (used), Year of construction: 2014, Machine Type: 3D CNC Coordinate Measuring Machine (CMM) Brand: Werth Model: ScopeCheck 400/400/300/FB/Z Year of Manufacture: 2014 Measuring Range X-axis: 400 mm Measuring Range Y-axis: 400 mm Measuring Range Z-axis: 300 mm Predpfx Adjv R Uzlenod Machine Design: Fixed Bridge (FB) with motorized Z-axis (Z) Sensors: Multi-sensor system – Optical and Touch Probe capable Optical System: High-resolution camera with telecentric or zoom optics Measurement Type: Non-contact and contact (hybrid capability) Control System: CNC-controlled in all 3 axes Software: Werth WinWerth® Accuracy: Micron-level precision (depends on configuration) Applications: Dimensional inspection, quality control, reverse engineering Industries: Aerospace, automotive, medical, precision engineering Power Supply: 230V / 50Hz (typical) Weight: Approx. 1000 kg (depending on configuration)

Condition: used, machine/vehicle number: 12727, Rotor diameter: 300 mm Rotor width: 900 mm 3-knife rotor 2 rows stator knives Inlet cross section approx. 300 x 900 mm Podpfx Adjl A Azvensrd Drive motor: 30 kW incl. flywheel

Condition: used, Year of construction: 1979, Intake diameter: 300 mm Predpfx Aewm Nrvjdnjd Discharge diameter: 300 mm Flow rate: 5400 m³/h Motor power: 2.5 kW Weight: 100 kg

Year of construction: 1991, condition: ready for operation (used), Groove width range: 2mm-32mm, max. ram stroke: 300mm, stroke rate: 300 strokes/min, max. installation height: 450mm, feed: 0.01mm-0.15mm, working speed: 30m/min, return speed: 30m/min, machine dimensions X/Y/Z: approx. 2500mm/1500mm/2200mm, weight: approx. 2200kg, control: fk electronic Dialog CNC. On-site inspection is possible. Pjdpfju D Aagox Adnjrd

Year of construction: 1987, condition: good (used), - Year of construction: 1987 - Horizontal sieves - 30 filter plates - Filter area : 6 m2 - Max, operating pressure : 6 bar - Capacity : 30 - 120 hl/h - With semi-automatic cleaning - Dosing pump replaced in 2017 - Machine in good condition Dimensions : - Length : 1800 mm - Width : 850 mm Prsdpfxet Igd Ne Adnod - Height : 2000 mm

Condition: good (used), vibratory conveyor, vibratory feeder, vibratory feeding device, feeding device, spiral conveyor, vibratory filler, vibratory spiral conveyor, vibratory doser, spiral conveyor -Handover: in current condition as viewed -Condition: without control, see photos Pjdpjvvtbzsfx Adnord -Screw conveyor: Vibration conveyor -Type: unfortunately without type designation -Connection: 230 volts -Transport dimensions: 460/300/H325 mm -Weight: 33.1 kg

Condition: used, functionality: unexamined, Labeller / label printer from ongoing production Pjdpfswip Susx Adnerd CAB Hermes A4L/300 see manual in the attachment several units available

Condition: used, machine/vehicle number: 3349, 2-blade double rotor 3 rows of stator blades Prsdpjghgf Nofx Adned Rotor diameter: 150 mm Working width: 200 mm Inlet cross-section: approx. 350 x 210 mm

Condition: ready for operation (used), Year of construction: 2018, operating hours: 17,000 h, functionality: fully functional, machine/vehicle number: 222866, clamping force: 3,000 kN, screw diameter: 70 mm, displacement volume: 1,120 cm³, overall weight: 7,100 kg, TECHNICAL DETAILS Clamping force: 3,000 kN Screw diameter: 70 mm Shot volume: 1,120 cm³ MACHINE DETAILS Weight: 7,100 kg Operating hours: 17,000 hours Predpfew N In Hjx Adnsd EQUIPMENT Barrier screw with homogenizing unit and mixing head Cleanroom suitability

Condition: good (used), Size: max 480 x 325 mm Size untrimmed with lap: max 480 x 325 mm, min 90 x 115 mm Size untrimmed without lap: max 440 x 300 mm, min 158 x 115 mm Size trimmed with lap: max 470 x 320 mm, min 148 x 105 mm Size trimmed without lap: max 430 x 295 mm, min 148 x 105 mm Speed max: 14.000 c/h Power requirements: 11-18 kW (220/380V, 50Hz) Equipment gathering chain & feeder • 7 station gathering track & chain • 4 double base • 6 feeders 345 • 1 cover folder feeder 1529 stitching unit • stitching unit 300 • wire unwind device • thickness control/ plus-minus • 2 stitching heads HK 75 three knife trimmer • three knife trimmer 251 knives • 2 sets of knives delivery • belt delivery standard accessories • 1 set of operator manuals Pedpfxek D Ah Us Adnord • 1set of electrical diagrams • 1 spare part catalogue • 1 set of tools further information • location: D- Braunschweig • next airport: Germany-Hannover • condition: very good

Condition: good (used), Year of construction: 2001, Quickwood Rustication / Brushing Line on 03 sides with 02 brushes per side Psdpfx Adjvy Eu Ionerd

Condition: good (used), Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Spring elements: Machine feet 4 pieces for machine tools and systems -Support surface: 300 x 250 mm -Height: 35 mm -Price: complete Prjdpfx Adewvficjned -Dimensions each: 300/250/H35 mm -Weight 13.3 kg/piece

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 6200 kg Movement X-Axis Movement 3000 mm Y-Axis Movement 1200 mm Pjdjwttw Nspfx Adnord Tools Max weight 6 kg Max tool diameter 100 mm Additional Equipment Automatic central lubrication Volautomatic set-up table Safety tread mats IMAWOP 6.0 Suction traverse at delivery for automatic discharge transport Driven conveyor belt for discharge transport This IMA BIMA CUT 120/300 was manufactured in 2008. It features a 4-axis milling spindle with a power of 7.5 KW and speeds ranging from 8000 to 24000 rpm, complemented by an 18-fold automatic tool changer. The machine includes a vacuum pump of 100 m³/h and a driven conveyor belt for efficient discharge transport. Consider the opportunity to buy this IMA BIMA CUT 120/300 CNC processing center. Contact us for more information about this machine. Application Types CNC Wood Machining

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: AP-10, type of input current: three-phase, input voltage: 380 V, total width: 7,000 mm, total length: 23,000 mm, nominal power: 20.5 kW (27.87 HP), electrical fuse: 60 A, Mašina za ispravljanje i sečenje armature – Centralni deo mašine je instalisane snage u kW u zavisnosti od modela – Uz mašinu se isporučuje odmotač nosivosti 3t. (vitlo) sa pneumatskom kočnicom – Automatski sto za odlaganje gotovog proizvoda 6 m Prsdpfewyaywex Adned – Tačnost mašine je ±2mm. – Mašina je automatska – Brzina mašine je od 50-100m/min – Uz mašinu dolaze: dva seta čaura za ispravljanje, dva para noževa i dva para mernih valjaka. Oprema na mašini ● elektro oprema u ormanu Schneider ● svi ležajevi u mašini su FAG ili SKF

Condition: excellent (used), I sell TOKYO Takayama 300 mm altimeter Made In Japan, solid and accurate. Pedsvbwyxopfx Adnsrd

Condition: ready for operation (used), Size: max 480 x 325 mm Size untrimmed with lap: max 480 x 325 mm min 90 x 115 mm Size untrimmed without lap: max 440 x 300 mm min 158 x 115 mm Size trimmed with lap: max 470 x 320 mm min 148 x 105 mm Size trimmed without lap: max 430 x 295 mm min 148 x 105 mm Speed: max 14.000 c/h Power requirements: 11-18 kW (220/380V, 50Hz) Equipment gathering chain & feeder: • 5 station gathering track & chain three knife trimmer: • three knife trimmer 251 • compensating stacker CS-20 Prjdpfod N D Nwex Adnod

Condition: new, Type 300 Prsdpjfhnx Sefx Adnod Brush roll width 320 mm Brush roll diametre 300 mm Working part 300 mm Drum diameter 180mm Spindle 35 mm Transport dimensions 330x300x300 mm Weight 5,2 kg

Condition: good (used), Rebuilt: 2015 Size: 480 x 325 mm Speed: 14.000 c/h Equipment: gathering chain & feeder: • 7 station gathering track & chain • 6 feeders 345 • 1 cover folder feeder 1528 stitching unit & trimmer: Pedpfxjdympcs Adnsrd • stitching unit 300 • 2 stitching heads HK 75 • three knife trimmer 251 • 2 sets of knives delivery: • belt delivery

Year of construction: 1988, condition: used, 480 x 325mm; 14,000c/h; 7 stations 6 feeders 279 Card gluer 1 folder feeder 1529 Prsdpfx Asbnczbedned Stapling station 300 Trimmer