Used Vibratory Plate for sale (14,150)

Condition: good (used), sheet width 2540 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm 9.0 St. back stop - adjustable 100 mm/sek cutting angle 1° 20 table height 855 mm table depth 500 mm no. of strokes 33 - 55 Hub/min 0 max. 250 bar engine output 5.5 kW weight of the machine ca. 5000 kg. range L-W-H 2960 x 1990 x 1700 mm From a maintenance workshop Good / well-maintained condition (!!) Equipment: - Powerful electro-hydraulic guillotine shear - AMADA NC control unit * Pivoting control panel, front left - NC electro-motorized material backgauge * Backlash-free ball screw - Manual cutting gap adjustment with 2 levers - 1x long side stop - 1x support arm - Rigid welded machine body - Sighting device with three mirrors (cutting according to marking) - Front safety guard (finger protection) - 1 freely movable foot switch Kodpfx Aoxn Tx Hefienc - Operating instructions (PDF) * Special accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: good (used), functionality: fully functional, Asymmetric 3-roll bending machine Plate roll-flanging machine BOMBLED - Model: 317 S Year: 1971 Maximum rolling thickness: 4 mm Maximum working length: 2050 mm Maximum flanging thickness: 3 mm Kedpfx Asxn Tgwefienc Roll diameter: 153 mm Control: motorized Motor: 3 kW / 4 HP Approximate weight: 2100 kg Dimensions: 3100x1100x1400 mm

Condition: good (used), functionality: fully functional, Year of construction: 1991, sheet thickness steel (max.): 16 mm, cutting length (max.): 6,000 mm, HYDRAULIC SHEAR LVD MVSB 62/16 Serial number 18478 Yom 06/1991 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 6200mm Distance between uprights 6400mm Gap 60mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.5° Min. number of strokes/min. 6 Knsdpfoumhm Aox Afioc Max. number of strokes/min 25 Min. blade clearance 0.05 mm Max. blade clearance 1.6mm Motor power 30kW Approx weight 35000 Kg LxWxH 7100x2400x3000mm Accessories included; ELGO P85 “GO-TO” for back gauge Electrical adjustment of back gauge 1000mm 1 x Front support 2mtr, one with 90° square arm front support L2000mm Foot pedal Ball bearings on table Inclinable back gauge with manual hydraulic pump

Condition: ready for operation (used), Year of construction: 1988, Immediately available ex-location: Hydraulic guillotine shear Fasti, type 509 25/6, year of manufacture 1988. Cutting length 2550 mm, material thickness 6 mm, electric backgauge 750 mm, drive 7.5 kW, weight 4 t. Price: EUR 5,500 plus VAT ex-location. Ksdpfsxqbnnox Afisnc

Year of construction: 1984, condition: good (used), burnt hydraulic guillotine shear, make LVD, type MVN 25 / 4, year 1984 power 2500 x 4 mm with backgauge with documentation Other accessories: Knjdpjihppxefx Afisc - Conveyor table - Lifting table

Condition: new, sheet width 2050 mm plate thickness 3 mm strokes per minute until 35 Knjdpfx Aevdfmxofijc cutting angle 2,0 ° table height over floor 870 mm thickness at "Niro-steel" 2 mm total power requirement 4 kW weight of the machine ca. 1550 kg range L-W-H 2,5 x 1,57 x 1,21 m The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, Travel paths Longitudinal movement (X-axis): 5,500 mm Vertical movement (Y-axis): 3,200 mm Spindle movement (Z-axis): 600 mm RAM/Outrigger movement (W-axis): 600 mm Feed rates X, Y, and Z axes: 2,800 mm/min Spindle unit Spindle power: 37 kW Boring spindle diameter: Ø 125 mm Spindle sleeve diameter: Ø 240 mm Spindle taper: SK50 Number of gear stages: 4 Spindle speed range: 3–700 rpm Faceplate diameter: Ø 1,000 mm Faceplate speed range: 1–82 rpm Gear stages Stage I: 3–33 rpm Stage II: 30–85 rpm Stage III: 88–247 rpm Stage IV: 250–700 rpm Connection data Operating voltage: 3 × 400 V Mains frequency: 50 Hz Total connected load: 80 kW Dimensions and weight Machine footprint: approx. 8 × 5 m Total height: approx. 5.5 m Machine weight: approx. 50,000 kg Features and accessories Robust, flat-bed horizontal boring mill in moving column design, in very good condition Retrofit including electrical system in 2014 Kjdexn Al Ajpfx Afionc Refurbished control panel with Heidenhain digital readout Coolant tank with belt filtration system, high and low pressure pumps Counterweight for weight compensation Conventional control Thread cutting device with change gears Axis drives via intermediate gearbox Swiveling control panel for operation from the front or rear of the machine Telescopic steel cover for X-axis Scope of delivery excludes foundation plates and rotary table Chip conveyor included in delivery

Condition: good (used), Clamping plate, marking-out, welding table, welding table, straightening plate, marking-out plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2000 x 1515 mm -Table height: 800 mm -Plate thickness: 130 mm -Transport dimensions: 2000/1515/H800 mm -Weight: 3250 kg Knodpfxoxnxnms Afioc

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1997, sheet thickness steel (max.): 16 mm, cutting length (max.): 4,000 mm, HYDRAULIC SHEAR LVD MVSB 40/16 Serial number 24159 Yom 1997 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 4050 mm Distance between uprights 4250 mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.0 ° Min. number of strokes/min. 7 Max. number of strokes/min 26 Min. blade clearance 0.5 mm Max. blade clearance 1.6 mm Motor power 22 kW Approx weight 20500 Kg LxWxH 4800x2170x2750mm Accessories included; Knsdpfx Aouipu Esfijc Electrical adjustment of back gauge 1000mm with Go-to controller blade clearance and cutting angle adjustable. 1 x Front support 1500mm, one with 90° square arm front support 1 x Front support of 1500mm Foot pedal

Condition: ready for operation (used), Year of construction: 1978, Available immediately from location: Knsdpfx Afexqbnhsioc LVD Hydraulic Guillotine Shear Type MVS 62/4 Year of manufacture 1978 Cutting length 6200 mm Material thickness 4.0 mm Digital backgauge 750 mm Drive 12.5 kW Weight 7500 kg Price: €5,500 plus VAT, ex location

Condition: good (used), Year of construction: 1992, Used guillotine shear, Helmut Lotze, type 205.3000x16, built in 1992 Working width: 3040 mm Kjdpfewaynbex Afisnc Max. sheet thickness: 16 mm Column width: 3040 mm Thrust: 200 mm Stop width: 1000 mm Motor power: 45 kW Stroke rate: 22/min.

Condition: new, Year of construction: 2019, sheet width 2050 mm plate thickness 2 mm strokes per minute until 38 cutting angle 1,75 ° table height over floor 870 mm total power requirement 3 kW weight of the machine ca. 1520 kg range L-W-H 2,2 x 0,6 x 1,2 m Demo machine at a special price: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Knsdpfx Ajvn Al Hjfiec Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille. Plus freight + packaging 270,--. This is a demonstration machine at a special price, so we are selling it without any warranty. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

Condition: new, Alfa Laval CBH62-12AH-G Approximately 10 kW condenser capacity. Several units in stock. All staff speak Dutch, German, and English. Prices are exclusive of VAT Shipping is possible (at additional cost) Kodpfsxp Nzaex Afionc (Subject to changes and errors in technical data, information, and prices, as well as prior sale)

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Knodpfx Afsxp Nvdjioc Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2100 x 1200 mm Kjdpfxoxnwble Afienc -Table height: 740 mm -Plate thickness: 130 mm -Transport dimensions: 2100/1200/H740 mm -Weight: 2400 kg

Year of construction: 1991, condition: ready for operation (used), Available immediately from location: Technoimpex hydraulic guillotine shear Kodjxqbfmopfx Afionc Type HS 5 / 2550 Year of manufacture 1991 Cutting length 2550 mm Material thickness 5 mm Digital backgauge 1000 mm Drive 5.5 kW Weight 4 tons Price: EUR 4,500 plus VAT, ex location

Condition: good (used), Year of construction: 1975, Manufacturer: Sagita – Beyeler License Model: 2550 × 10 (Sheet length × Cutting thickness) Kjdpfx Aew Ecwcofienc Cutting length: approx. 2520 mm (effective) Max. cutting thickness (steel): ~10 mm Backgauge: approx. 750 mm, motorized adjustment Blade gap adjustment: manually adjustable Space requirements: with table supports: 3,200 × 2,800 × 1,600 mm transport-ready: 3,200 × 2,150 × 1,600 mm Weight: approx. 6,300 kg

Condition: excellent (used), Year of construction: 2022, overall weight: 2,550 kg, controller manufacturer: SIEMENS, controller model: S7, CONTROLS .. CNC controls SIEMENS S7 Knjdpfx Afexnwa Ueisc ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. total weight approx.: 2550 kg Stream finishing machine with robot loading for processing watch parts with a dry polishing process - Automatic loading from the right - 3 workpieces weighing up to 2 kg - One lifting unit for each workpiece - Media capacity: approx. 220 liters - High-quality machine enclosure

Condition: used, Cast Iron bed plate tee slotted 6m x 2.2m, Approx weight 10 Tons, we can load to buyers transport with overhead crane. note there is one 6inch hole that has been burned out in the table as shown in the images. Knsdpfxoxp Ib Ss Afiec

Condition: good (used), Year of construction: 2001, Bending length: 4000 mm Bending strength: 45 mm Anbiegung (kalt) / Pre-bending (cold): 38 mm Antriebsleistung / Drive power: 100 kW Anzahl Walzen / Number of rollers: 4 Adjustable rollers / Adjustable rollers: 3 Verstellungsart der Walzen / Adjustment type of rolls: hydraulisch Oberwalzendurchmesser / Top roll diameter: 710 mm Knedpfxexp Ntpj Afiec Unterwalzendurchmesser / Bottom roll diameter: 640 mm Seitdwalzendurchmesser / Side roll diameter: 520 mm Arbeitsgeschwindigkeit / Working speed: 2+4 m/min (up to 8m/min) Gewicht Maschine (mit Walze) / Weight of machine (with roller): 78 t Zusatzausrüstung / Additional equipment: Elektronischer Gleichlauf / Electronic synchronization Luftgekühlter Öl-Kühler / Air-cooled oil cooler Obere Stützvorrichtung / Upper support device Seitliche Zylinderabstützvorrichtung (10t) / Lateral cylinder support device (10t) Infeed table (20t) / Infeed table (20t) hydr. Bladder accumulator / hydr. bladder accumulator Konusbiegenvorrichtung / Cone bending device

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: surface plate with adjustable feet Knjdpfxjxnv Ike Afioc -Length: 2000 mm -Width: 1515 mm -Plate thickness: 130 mm -Adjustable feet: Ø 300 x 670 mm -Transport dimensions: 2000/1515/H430 mm -Weight: 3150 kg

Condition: good (used), Year of construction: 2006, machine/vehicle number: B0617A0014, Offer 25376 Technical Data: - Max. cutting width: 3050 mm - Max. cutting capacity at 45 Kp/mm²: 13 mm - Hydraulic cutting angle adjustment - Number of hold-downs: 13 pcs Knodpfx Aoxp Hp Ujfiec - Front angle gauge - 4 front support arms - Motor-driven, position-controlled backgauge: 10 - 1000 mm - Cutting line illumination - Rear area safety with side grids and light barrier - Electric foot switch - Drive: 400 V / 20 kW - Required floor space approx.: W 4350 x H 2100 x D 2200 mm - Weight approx.: 8.5 t

Condition: new, Year of construction: 2025, TBS - Manual plate shears Manual plate shears Suitable for cutting mild steel, aluminium, copper, zinc, plastics High quality cutting blades made of steel with a hardness of HRC55-60 Equipped with two operating handles With front support surface with scale and adjustable back gauge 800 mm table height Scope of delivery: 2 operating handles Kodpfx Ajcnxc Refisnc Model TBS 2000-12 Article no. 3746020 Technical data working width max. 2000 mm sheet thickness max. - material tensile strength 400N/qmm 1,25 mm backgauge range 0-300 mm weight 511 kg Dimension in mm 2450 x 1100 x 1050 mm

Year of construction: 2025, condition: new, NEW - - Ideal for removing plates from your standing plate storage. - For in-plant transport of the plates to the standing or lying panel dividing saw. - The steplessly height-adjustable support surface can be exactly to the height of your panel saw. height of your panel saw. - Panels weighing up to max. 250 kg can be transported or Ksdpfx Afjd Tyaajienc transported or swiveled by one operator alone. Technical data: Support height - standing: approx. 120 - 340 mm - lying: approx. 890 - 1200 mm max. plate size: 5200 × 2100 mm load capacity: 250 kg Location: ex stock 54634 Bitburg - immediately available- Will be shipped for 90,- Euro net within Germany

Condition: good (used), Year of construction: 2005, Marking and surface plate 1000 x 1000 with base frame Knedpowqx Axjfx Afiec Location: from stock 54634 Bitburg - available immediately -