Used Vibratory Plate for sale (12,832)

Condition: new, EROWA clamping pins F/A Inox (1 set = 20 pieces) ER-007980, new and originally packaged Ksdpfex Tr Awox Ah Nsdg

Condition: new, EROWA Uniplatte C (1 set = 12 pieces) ER-093780, new and in original packaging Kjdpfx Asx Trwzjh Nodg

Condition: new, functionality: fully functional, FLAIG Permanent Magnetic Chuck 300 x 150 x 51 mm, type PMSF/PMNM, with ultra-fine transverse pole division, magnetic system with neodymium magnets, fine pole spacing, removable key, maximum holding force 100 N/cm², magnetic field height 5 mm, pole plate wear allowance 6 mm, weight 19 kg, for clamping the smallest thin-walled workpieces for grinding and EDM work, ideally suited for pallet systems due to its very low dead weight. Kdjdpfx Ahjx Tqfko Njg

Condition: ready for operation (used), Length: 4000mm Width: 1880mm Height: 400mm Kodpsx Tpvnefx Ah Njdg 4 pieces

Year of construction: 2005, condition: used, Fabricant : Alfa Laval Model : Tetra pak C10-SM Year : 05 Type : Échangeur à plaque Application: pasteurizer Kdjdpfox R A Edjx Ah Njg Fluid group: 2 Volume: 533 L Pressure: 0/16.0 bar Temperature: 0 / 110°C Sections: 5 Plates: 64 units

Condition: good (used), functionality: fully functional, Year of construction: 1997, machine/vehicle number: C971109, controller manufacturer: AMADA, controller model: PROMECAM, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, overall weight: 10,000 kg, total length: 4,500 mm, total width: 3,500 mm, total height: 2,800 mm, AMADA GPX 630 Guillotine Shear - Power supply: 5.5 kW - Max. backgauge travel: 160 mm - Including left stop Kedpjxw T Iasfx Ah Nsdg - Backgauge length: 3200 mm - Cutting length: approx. 3050 mm Note: The item must be definitively collected between 19 and 23 January 2026 on a date to be mutually agreed. FCA D-76571 Gaggenau – loaded onto truck

Condition: used, Used Seitz Enzinger Noll reportedly model 60/150 type C stainless steel filter press. Unit has (67) 600mm x 600mm stainless steel plates and (1) stainless steel end plate which will accomodate (66) filter sheets giving approximately 22m2 filtration area. Unit is type C with central tightening device via spindle and capstan handle. Kdedpsx Ryrbofx Ah Nog

Condition: used, Year of construction: 1998, sheet width 3050 mm Ksdpfxsw S Nkno Ah Nodg plate thickness 6 mm rear stop 10 - 750 mm cutting angle 0,5 - 3 ° down holder 18 Stk no. of strokes 9 / 14 Hub/min total power requirement 7,5 kW dimensions of the machine ca. 3750 x 1600 x 2450 mm weight 4800 kg Features: - Electro-hydraulic, slide-guided sheet metal guillotine shears - Front control panel, front left - With electro-hydraulic cutting angle adjustment - With manual cutting gap adjustment, from the front (eccentric) - Electric motor rear stop 10-750 mm (ball screws) - With analog position display + hand wheel for fine adjustment - 1x side stop - 3x support arms - 1x freely movable foot switch - Front finger guard - Operating instructions (PDF)

Condition: used, Year of construction: 1983, sheet width 3050 mm plate thickness 6,0 mm Kdsdpfxovxlpio Ah Nsg distance between columns 3000 mm cutting angle 0,5 - 3 ° no. of strokes 9 / 14 Hub/min down holder 18 total power requirement 10 kW weight of the machine ca. 4800 kg dimensions of the machine ca. 3750 x 1600 x 1650 mm Features: - Hydraulic / slide-guided sheet metal guillotine shears - Electric backgauge 10-750 mm - Electric cutting angle adjustment - Manual cutting gap adjustment - 1x side stop - Front finger guard - Foot switch

Condition: used, Year of construction: 2012, sheet width 3100 mm plate thickness 16 mm distance between columns 3400 mm cutting angle 2,5 ° work height max. 900 mm rear stop 1000 mm down holder 14 Stück Control CYBELEC CYB TOUCH 6 oil volume 500 l no. of strokes 10 Hub/min Kdjdpewli Nfsfx Ah Nsg total power requirement 30 kW weight of the machine ca. 16400 kg dimensions of the machine ca. 4150 x 2360 x 2450 mm Features: - Electric rear stop 1000 mm - Electric cutting gap adjustment - Electric cutting angle adjustment - Cutting length limitation - CYBELEC CybTouch 6 control - Light barrier behind the machine - Finger protection at the front - Ball rollers in the support table - 1x side stop - 2x front support arms - Foot switch

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms Kedpfouagxpox Ah Nedg - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: used, Year of construction: 1985, sheet width 2500 mm plate thickness 6 mm rear stop 750 mm down holder 16 Stk total power requirement 12 kW weight 5400 kg Kdedpfx Ajt Sykqeh Nsg dimensions of the machine ca. 3000 x 1500 x 2000 mm Equipment: - Electric backgauge 750 mm - Pneumatic sheet metal holders - 2x side stops - 3x front support arms - Ball rollers in the front support table - Rear sheet metal chute - Foot switch

Condition: used, Year of construction: 1973, sheet width 3100 mm plate thickness 3 mm rear stop 1000 mm down holder 18 Stk cutting angle 0.5 - 1,0° 30° ° oil volume 150 l total power requirement 5,5 kW weight 4300 kg dimensions of the machine ca. 3800 x 1950 x 1600 mm Kdjdpfx Ahetzv T Te Nog Features: - Manual rear stop (front via handwheel) - Manual cutting angle adjustment - 1x front support arm - 1x side stop - Front finger guard - Operating instructions (English)

Condition: used, Year of construction: 1985, sheet width 2550 mm plate thickness 4 mm rear stop 1000 mm Ksdpfsv Uq Snsx Ah Nodg cutting angle 1,5 ° down holder 14 Stk total power requirement 6,5 kW weight 3400 kg dimensions of the machine ca. 3000 x 1500 x 2000 mm Features: - Electric rear stop 1000 mm - Electric cutting angle adjustment - 1x side stop 1250 mm - 3x front support arms - Front finger guard - Foot switch

Condition: used, Year of construction: 2008, sheet width 3100 mm plate thickness 6 mm rear stop 1000 mm cutting angle 1,2 ° down holder 14 Stk no. of strokes 18 Hub/min oil volume 150 l total power requirement 11 kW dimensions of the machine ca. 3900 x 1900 x 1600 mm weight 5500 kg Equipment: - Hydraulic swing cut shears - ELGO control system - Electric backgauge 1000 mm - Manual cutting gap adjustment - Cutting length limitation - Ball rollers in the table - 2x front support arms - 1x front side stop with scale - Front finger guard, hinged - Rear safety device (protective grille + light barrier) Kdsdpfjvuz Tpsx Ah Neg - Foot switch - Operating instructions

Condition: used, length 1250 mm width 1250 mm 1595 mm 10 t 290 mm 2,0 t 1,8 x 1,3 x 0,3 m - The round table comes from an exhibition and is new! Kjdpjk Tu Nnofx Ah Nodg

Condition: used, Year of construction: 1989, sheet width 2540 mm plate thickness 6 mm rear stop 900 mm down holder 14 Stk no. of strokes 20 Hub/min total power requirement 10 kW dimensions of the machine ca. 3100 x 2200 x 2600 mm Kjdpfx Ahjvg R Sfe Nodg weight 5000 kg Features: - Central lubrication - Electric rear stop - 1x side stop 2350 mm - 2x front support arms with stop 1700 mm - Front finger guard - Spare blade (used) - Foot switch

Condition: used, Year of construction: 2017, sheet width 2070 mm plate thickness 25 mm pre-bending 18 diameter of upper rolls 320 mm side roll diameter 260 mm diameter of lower rolls 320 mm 26 kW 8100 kg 4700 x 2000 x 2200 mm Features: - Hydraulic side roller adjustment - Conical bending device - 2 driven rollers - Hardened rollers - Hydraulic folding bearing - Mobile control panel - Foot switch - Safety device Kdsdpfswc D Dxjx Ah Nsg - CE mark

Condition: used, Year of construction: 1976, sheet width 3000 mm plate thickness 6 mm no. of strokes 18 Hub/min cutting angle 1°30 ° throat 300 mm back stop - adjustable 750 mm total power requirement 11 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 3,9 x 2,2 x 1,85 m Equipment: - Electro-hydraulic plate shear - 1000mm electric backgauge - Piece counter - With analog position display - Manual cutting gap adjustment - Manual cutting angle adjustment - 4 support arms - Sheet metal chute - Spare blades - Front finger guard - Foot switch Kjdpfewyxxrjx Ah Nsdg

Condition: new, sheet width 3100 mm plate thickness 10,0 mm thickness at "Niro-steel" 6,0 mm down holder 14 Stück no. of strokes 13 Hub/min oil volume 260 ltr. cutting angle 2,0 ° throat 350 mm engine output 22,0 kW back stop - adjustable 1.000 mm weight 10.575 kg. range L-W-H 4,05 x 2,5 x 2,17 m ----- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) Kdsdsxabdbopfx Ah Neg - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: new, sheet width 3100 mm plate thickness 13,0 mm pre-bending 10,0 mm diameter of upper rolls 300 mm side roll diameter 210 mm diameter of lower rolls 270 mm total power requirement 11,0 kW Furnishing: - electro-hydraulic 4-roller bending machine Kdsdpexabflsfx Ah Nsg - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 1600 mm plate thickness 15,0 mm ST pre-bending 13,0 mm ST diameter of upper rolls 230 mm side roll diameter 210 mm diameter of lower rolls 190 mm Ksdpfx Ahexabkho Nedg total power requirement 7,5 kW weight of the machine ca. 4225 kg. dimensions of the machine ca. 4000 x 1300 x 1440 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 4100 mm plate thickness 10,0 mm thickness at "Niro-steel" 6,0 mm down holder 28 Stück no. of strokes 18 Hub/min oil volume 260 ltr. cutting angle 0,5 - 2 ° control CYBELEC Cybtouch engine output 22,0 kW back stop - adjustable 1000 mm range L-W-H 6100 x 2580 x 2460 mm weight 15.100 kg. ----- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guillotine guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device * Monoblock design Kdsdpoxabwusfx Ah Nsg

Condition: used, Year of construction: 2009, sheet width 4050 mm plate thickness 6.50 mm thickness at "Niro-steel" 4.00 mm back stop - adjustable 1000 mm no. of strokes 6 - 11 Hub/min work height max. 880 mm Control SC 70 cutting angle 0.5 - 3.0 ° down holder 23 Stück engine output 11.0 kW weight of the machine ca. 7500 kg range L-W-H 4950 x 1950 x 1720 mm Machine made from light metal production (ALU) good condition Ksdpjxaccrjfx Ah Nodg including special accessories such as sheet metal holding device - in checked condition - machine video - ?v=pv7RRijDXJA Furnishing: - electro-hydraulic/blade-guided guillotine shears - HACO CNC control model SC 70, swiveling at the front left * Pre-selection positioning of the backgauge * Digital display of actual position value * electro-hydraulic cutting angle adjustment * electro-hydraulic cutting gap adjustment * programmable retraction from the backgauge * Programmable cutting length limit * Emergency switch - electro-hydraulic cutting gap adjustment - electro-hydraulic cutting angle adjustment - electro-motorized back gauge, on ball screws - hydraulic hold-down devices - front finger protection - Ball rollers in the support table - 1x side stop, with mm scale - 1x freely movable foot switch - rear guard - original operating instructions including CE declaration Special accessories included: - pneumatic sheet metal holding device for thin sheet metal blanks * for sheet thicknesses up to max. 4.0 mm * optimal positioning of thin sheets

Condition: new, sheet width 3100 mm plate thickness 8,0 mm ST pre-bending 6,0 mm ST diameter of upper rolls 230 mm side roll diameter 210 mm diameter of lower rolls 190 mm total power requirement 7,5 kW weight of the machine ca. 6.020 kg. dimensions of the machine ca. 5142 x 1390 x 1300 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) Kedpexabm Aofx Ah Njdg - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual