Bolster plate

WMW AP 3000x1775

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 100,000 mm, total length: 212,000 mm, overall weight: 100,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Fsdpfxerx Rxto Ad Ijgd Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. Fsdpexdmgvofx Ad Ijgd 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: good (used), Year of construction: 1995, CNC turning machine Manufacturer: MONFORTS KNC 6, Year: 1995 Control system: Monforts MTC K. Fsdpfx Adohktd Nj Ijgd Center distance: 2000 mm Max. turning diameter over bed: 630 mm Max. turning diameter over cross slide: 380 mm Spindle speeds: 2 - 1800 rpm Spindle motor: 21/15 kW Spindle bore: 71 mm 3-jaw chuck FORKARDT 400 mm Tool holder Multifix size C with 3 tool pockets. Space requirement: Length 4000 mm, Width 2200 mm, Height 1900 mm Weight: approx. 5000 kg Complete machine documentation available. Machine can be demonstrated in operation.

Condition: good (used), Year of construction: 1976, Centre lathe ZERBST - DPS 1800 MACH-ID 581 Make: ZERBST Type: DPS 1800 Year: 1976 Swing over bed Ø 1600 mm Swing over cross slide Ø 1250 mm Swing in the gap Ø 2100 mm Bed width 1400 mm Power Fgjdpfxewvir Ie Ad Isd 35 kW Speeds / ranges 180 Rpm

Condition: good (used), Year of construction: 1972, Scissor lift table, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table -Manufacturer: Lödige, scissor lift table -Load capacity: 1000 kg -Platform: 3000 x 2000 mm -Dimension retracted: height 390 mm Fgedpfemghawjx Ad Ijd -Dimension extended: height 2000 mm -Hydraulic unit: Bauknecht 3 kW / 150 bar -Transport dimensions: 3000/2000/H390 mm -Own weight: 2100 kg

Year of construction: 1960, condition: refurbished (used), machine/vehicle number: 1733, Vertical internal broaching machine with switching plate of the company Karl Klink Type: RSI10DT Machine No.: 1733 Year of manufacture: 1960 weight: 4,9 to broaching force: 10.000kg With switch plate ( 2 stations ) Power supply: 380V / 50Hz Rated current: 35 A Fgjdegyd S Sjpfx Ad Ijd Connected load: 7,5 kW The machine is completely revised and is therefore in a very good condition.

Condition: new, Year of construction: 2019, pressing force: 275 t, pressure:275 t distance between columns:3000 mm total power requirement:30 kW weight of the machine ca.:40 t draw back pressure:27 t pump capacity:Axialpumpe mit Proportionalventil :6000 mm :max. 3000 mm Table dimensions:6000 x 3000 mm table height over floor:700 mm distance between table / ram:1100 mm :450 l traversing speed:auf X und Y, 30-33 mm/sec. down speed:2-10 mm/sec :2-50 mm/sec. Cylinder hub:900 mm Cylinder diameter:440 mm Stestle extension:200 / 200 mm / Ø :40 mm Siemens Control System:S7 1200 Fgjdpfx Adefxyige Ied Monitor Siemens 9":Touch Panel Tax desk:tragbar

Condition: like new (used), Year of construction: 2007, Retrofitted: 2026 Fjdpfoyf Rrtex Ad Isgd Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): 240 / 1240 mmDistance between columns: 2500 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871)  /  Pull stud: DIN69872Speed range: 6000 rpmSpindle power: 30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 35500 KgMachine dimensions approximate: 10975 x 4770 x 5345 mm Accessories Guarding: 2 slidings doors and new perimetral wire-mesh fenceAutomatic tool changer: ATC-60 (sale option with no ATC)Chip conveyor: 1 transversalElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sale conditions Warranty: 6 months mechanical spare partsPrice and sale conditions: On request View all technical features

Condition: used, Year of construction: 2022, operating hours: 1,518 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system Fsdpfexx N Dgjx Ad Iegd - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Delivery date by arrangement

Condition: good (used), Year of construction: 2016, spindle speed (max.): 3,500 rpm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore: 86mm With jacket tube.:78mm Turret head: 12 main positions 12 secondary positions, BMT65 connection, Fgodpfxewtg Ino Ad Isd Programmable hydraulic tailstock: MT5 Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw S2max=5000 1/min X movement range: 260mm Z axis movement range: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight: 6000 kg