Used Vhf Cam 2030 for sale (7,554)

Condition: good (used), Globoid gear, indexing, oscillator indexer, index gear, rotary index drive -Manufacturer: CAMCO, index gear -Type: MSHV40A917-Y7A -Overload clutch: 11FC-SD -Shaft: Ø 55x45 / 35x80 / 35x75 mm -Translation: 20 rev. = 90° Iijdpfewz Idtjx Affjk -Dimensions: 815/720/H585 mm -Weight: 327 kg

Condition: excellent (used), Year of construction: 2007, Control: Heidenhain TNC 320 T - Various holders Table Clamping area: 1200 x 450 mm T-slots: 6 x 18 H7 mm Maximum load: 400 kg Feed Axes Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm Feed: stepless Rapid traverse X, Y: 4000 mm/min Rapid traverse Z: 1500 mm/min Feed motor AC (Z): 3.0 (10.5) Nm Spindle Speed range: 55 – 3000 rpm Spindle taper: ISO 40 Spindle gearbox: frequency controlled, 2-stage Spindle motor: 7.5 kW Head swiveling: 0–140° Iijdew U Rpdjpfx Affek Dimensions Length: 2200 mm Width: 1800 mm Height: 2000 mm Weight Net weight: 2100 kg Gross weight: 2300 kg

Condition: used, Year of construction: 2011, Scissor Lift - JLG 2030 ES Manufacturer: JLG Model: 2030 ES Year of Manufacture: 2011 Technical Specifications Working Height: 8.10 m Platform Height: 6.10 m Platform Length: 2.24 m Platform Width: 0.69 m Total Weight: 2,020 kg Length: 2.30 m Width: 0.76 m Clearance Height: 2.20 m Basket Capacity: 360 kg Stabilizers: None Drive: Electric Special Features Platform Extension: 0.90 m with 360 kg capacity Suitable for indoor and outdoor use (outdoor operation: max. 1 person, 160 kg) Non-marking tires Foldable guard rails, height 1.81 m Driving License Class: 3/B Service/Inspection Status TÜV: Not required UVV Safety Inspection: valid until 11/2025 Mileage: Not applicable Operating Hours: 495 hours as of 04/2025 Price indicated excluding statutory VAT. Are you interested? Ijdpfx Aexfi D Hsffsik We are always at your disposal! You can reach us Monday - Friday from 7:00 am to 4:00 pm. Subject to change and errors!

Condition: used, mileage: 159,981 km, power: 350 kW (475.87 HP), first registration: 07/2023, fuel type: diesel, empty load weight: 8,234 kg, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, front tire size: 315/70R22,5, rear tire size: 315/70R22,5, number of seats: 2, Equipment: ABS, air conditioning, compressed air brake, cruise control, onboard computer, parking heater, truck registration, | Mercedes Actros 1848 Giga-Space | Automatic, Euro 6, | Retarder | Heated seats, multifunction steering wheel | Air conditioning, cruise control | Differential lock | Auxiliary heating, sunroof | ACC, lane departure warning, emergency braking assistant | Very good condition | Subject to errors, typos, and prior sale. Iijdpfx Aew Rbc Toffok

Condition: used, mileage: 469,950 km, power: 350 kW (475.87 HP), first registration: 02/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: air conditioning, navigation system, * Multifunction steering wheel * Navigation system * Radio * Refrigerator * 2nd sleeper couch * Mirror Cam ----* Adaptive cruise control * Lane departure warning system * Differential lock rear axle * Leaf/air suspension * Retarder Iiedpfx Aovhuf Eeffok -----Internal vehicle number: 9813----Errors and omissions excepted.

Condition: used, Year of construction: 2014, X-travel: 1250mm, y-travel: 1280mm, z-travel: 150mm, max. feed rate: 15m/min, repeat accuracy: 0.01mm, spindle rotational speed: 0-24,000/min, software: VCarve Pro, data formats: HPGL-3D / G-Code, spindle power: 6.5kW, controls: Siemens Sinumerik 808D Milling, weight: 1.2t, with collet spindle, Phenol vacuum high-pressure table, 850W servo motors Yaskawa, steel base, precision ball screws in all axes, x-axis with dual drive, linear guides, protective cover for all drive axes, suction foot for chip extraction, automatic spray cooling and material sensor. Iijdpfx Afswqd Rhefek

Condition: new, RT250-8/3-RH-50-4, RT250, Taktomat drum curve rotary table with motor Model: RT250-8/3-RH-50-4 Iedpfxsrazi Ee Affeik Type: RT250 Condition: New

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1200x1600x1400 mm Iijdpfsvz Eymex Affek Weight 750 kg Total power requirement 5 kw

Condition: used, Year of construction: 2011, Scissor Lift Platform – JLG 2030 ES Manufacturer: JLG Model: 2030 ES Year of manufacture: 2011 Technical Data Working height: 8.10 m Platform height: 6.10 m Platform length: 2.24 m Platform width: 0.69 m Total weight: 2,020 kg Length: 2.30 m Width: 0.76 m Overall height (stowed): 2.20 m Platform capacity: 360 kg Outriggers: none Drive: electric Special Features Platform extension: 0.90 m with 360 kg capacity Iijdpfxoxfi Dgs Affok Suitable for indoor and outdoor use (outdoor use for one person only, max. 160 kg) Non-marking tyres Foldable guard rails, height 1.81 m Miscellaneous: 4 new batteries (installed 04/2025) Driver’s license: Class 3/B Inspection Status TÜV: not required UVV inspection valid until: 09/2025 Mileage: not applicable Operating hours: 501 hrs as of 04/2025 Price plus statutory VAT. Interested? We are always happy to assist you! You can reach us Mon – Fri from 7:00 am to 4:00 pm. Subject to prior sale and errors!

Condition: used, Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: Ankerwerk Nuremberg AEG, geared motor with brake Iodorgtd Hepfx Affoik -Gear: Armature movement CAM 76 N 1 i= 33 -Speed: 43 rpm -Engine: AEG type AM 80 N4 -Power: 0.75 kW / 1400 rpm -Shaft: Ø 32 x 78 mm -Dimensions: 525/240/H275 mm -Weight: 50 kg

Year of construction: 2024, condition: new, Big CNC router machine for a big production. With it, you can produce doors, cabinets, tables, chairs, gaskets, LED signs, souvenirs, and 3D relief on wood. Great choice for those who seek no limits. Iodpfoih Sdgox Affjik This machine is used for cutting and engraving wood, MDF, chipboard, acrylic, plexiglass, PVC, composite, and aluminum. Wattsan M1 2030’s planetary gears provide high speed, and the reinforced gantry and bed guarantee no vibrations during the work. Together, they provide precision. You can give our managers a call for additional details! Wattsan M1 2030 characteristics Working area: 2000x3000 mm Spindle: 6 kW Machine size: 2700x3540x1780 mm Weight: 860 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: ready for operation (used), Year of construction: 2023, Usable working area: 2000x3000mm, z-axis: 50mm, repeatability on the entire surface: ±0.05mm, X/Y/Z-addressable resolution: 0.001mm, max. acceleration: 15m/s², max. working speed in XY-axis: 2000mm/s, drives: X/Y-system with linear motors, Z-axis with servo motor. Laser protection class: Class 1, with cover, base body: stable, welded steel frame structure, axis system: X/ Y/ Z movement axes, drive: linear motor drive, contactless and low-wear, removal system: 2000mm extension, conveyor: Aluminum slats with servo motor drive, Pressure roller: for material, Laser source: CO2 laser 300W, closed and maintenance-free, Cooling: Closed cooling circuit with water recooler for laser, Cutting head: 5 inch, lens, cutting nozzle, cutting gas supply, Extraction: Extraction tray for small parts and dust, Software: CAM control software ICARO. Motorized brush width: 2000mm, SEI PC console: without computer, to be provided by the customer, Extraction unit: 2x extraction fans 5.5kW each, Scanner: Manual barcode scanner, Unwinding device: for material rolls with unwinding bar, Unwinding system: Connection available. The system was only installed and approved, series operation did not take place. On-site inspection is possible, documentation available. Iiodpfxewbuzfe Affjk

Condition: new, RT160-8/3-320-RH-50-4, RT160, Taktomat drum curve rotary table with motor Isdpfx Afjrazkxefsik Model: RT160-8/3-320-RH-50-4 Type: RT160 Condition: New

Condition: used, machine/vehicle number: 67252, volume flow: 425 m³/h, operating pressure: 6 bar, final pressure: 6 bar, power: 130 kW (176.75 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 170 A, protection type (IP code): IP54, Pump Bornemann pump, type W7T.2ZK-130, 6.5bar, 425 m3/h, electric motor LOHER, ENGV-355MB-64A, 90/130 kW, in good condition. Iodpfx Afjvwlkkofeik

Condition: used, Globoidal cam gears, indexing, oscillator indexer, index gear -Manufacturer: Manifold, Transmission Clutch Indexing Iiodpferiidyex Affjk -Type: V-1-C 5 120 -Shaft: Ø 48 x 145 mm -Indexing angle: 120° -Number of stops: 5 -Dimensions: 400/385/H395 mm -Weight: 151kg

Condition: new, Year of construction: 2024, Operating massive working pieces? Then this CNC laser machine would be the ideal option. The Wattsan 2030 Flat Bed is a laser cutter designed to work with large materials. There is no need for extra preparation; go right to work! Iiedpfxjry Uf Ao Affsk This CNC laser machine has a table size of 2000x3000 mm. It also includes a trash collecting container, which will make the job much more enjoyable. Wattsan 2030 can cut materials such as cloth, plywood, cardboard, rubber, acrylic, plexiglass, and wood. You can give our managers a call for additional details! Wattsan 2030 Flat Bed characteristics Working area: 2000x3000 mm Laser power: 100-130 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Machine size: 2400 x 3750 x 800 mm Packing size: 3860 x 2540 x 1020 mm Weight: 1075 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Year of construction: 2013, condition: ready for operation (used), Output: 1000/min, number of cameras: 2. On-site inspection is possible. Iiedpeucfxaefx Affok

Condition: new, RT200-02-320-RH-20-4, RT200, Taktomat drum curve rotary table with motor Model: RT200-02-320-RH-20-4 Iisdorazk Rspfx Affok Type: RT200 Condition: New

Condition: good (used), Frequency converter, frequency converter, drive converter, controller, variable speed drive -Power: 3.12 kVA -Input: 3x 208-240V 12.0A OR 1x220-240V -Output: 3x 0-220 V Iijdpfocaq Dkex Affsk -Output frequency: 500 Hz -Number: 1x converter available -Dimensions: 110/250/H180 mm -Weight: 2.2 kg

Condition: new, Year of construction: 2024, Lights! Camera! Action! This CNC laser machine has a working area of 1600x1000 mm, which is lit by light panels on the sides, and a Canon camera. All for it to majestically operate fabrics, fut, tule, leather, and other materials. The camera recognizes and scans contours and shapes, and then transfers them to the computer. In a special program, the operator can make the necessary changes to the drawing and send it for cutting. Easy and convenient. There is no need for a hand-made lingering process. You can give our managers a call for additional details! Wattsan 1610 Cam conveyer characteristics: Working area: 1600x1000 mm Laser power: 100-130 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Machine size: 2200 x 1800 x 1105 mm Packing size: 2300 x 1980 x 1200 mm Weight: 770 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK Iijdpfjrzrmbex Affjk On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Year of construction: 1989, condition: ready for operation (used), Workpiece diameter (radial curve): 600mm, workpiece length (radial curve): 200mm, travel X/Y/Z: 650mm/250mm/300mm, work feed: 30m/min, rapid traverse: 30m/min, max. tool diameter: 300mm, max. tool width: 63mm, control: Siemens 840D. Documentation available. On-site inspection is possible. Iiedpfx Afsvpvk Eefok

Condition: new, RT160-04-300-RH-20-3, RT160, Taktomat drum curve rotary table Iodpevrhv Ssfx Affoik Model: RT160-04-300-RH-20-3 Type: RT160 Condition: New

Condition: used, Globoid gear, indexing, oscillator indexer, index gear -Manufacturer: Manifold, gearbox from rotary indexing table type RTU 800 8-150 -Translation: i = 1:8 45° -Dimensions: see photos -Quantity: 2x gears available -Price per piece -Dimensions: 470/375/H500 mm Iiodpfx Afsrub H Tefek -Weight: 172 kg/pc.

Condition: ready for operation (used), Year of construction: 2007, Working height: 8100mm, platform height: 6100mm, load capacity: 360kg, platform dimensions X/Y: 2300mm/760mm, transport length: 2300mm, weight: approx. 1970kg, operating hours: approx. 556h. An on-site inspection is possible. Iiedpfxjw Na Ewj Affjk

Condition: used, Cam switches, circuit breakers, motor protection switches, step switches, rotary switches -Type: WAA477/100 VZ -Voltage: AC-3 kW 3 ph 380 V/440 V 125 A Ijdpefmldmofx Affjik -Dimensions: 330/95/H130 mm -Weight 2.3 kg