Used Vhf Cam 2030 for sale (1,340)

Condition: good (used), mileage: 237,707 km, power: 350 kW (475.87 HP), first registration: 03/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,850 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2023, Equipment: AdBlue, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, navigation system, parking heater, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, - Adaptive cruise control - Aluminum fuel tank - Leaf suspension - Bluetooth - Brake booster - EPS (electronic power steering) - Remote central locking - Low noise emission - Speed limiter - Intarder - Load protection grid - Particulate filter - Radio/CD player - Rain sensor - Sliding roof - Sleeper cab - Side door - Seat heating - Sun visor - Lane keeping assist - Auxiliary heater (parking heater) - Toolbox - Xenon lighting Cgedpfsya Ifajx Abbon Front axle: Steered; Suspension: Leaf springs Rear axle: Suspension: Air suspension Unladen weight: 8,250 kg Payload: 12,250 kg Gross vehicle weight (GVW): 20,500 kg Technical condition: good Visual condition: good Vehicle number: 102 Mercedes Benz Actros 5 / 2148 / Mirror CAM / BigSpace / Euro6 VIN: W1T9634011C054040 Suspension: Leaf / Air Transmission: Automatic Air conditioning Engine brake Cruise control Auxiliary heater (parking heater) Distance control assist Lane keeping assist Navigation system Emission standard EURO 6 2 x Fuel tank Special equipment: Axle load measuring device, Front axle load 8.0 t, Trailer socket 15-pin + 7+7-pin, Audio system: Digital radio DAB / DAB+, Equipment package: Media, Equipment package: Safety, Equipment package: Storage, Battery 220 Ah (AGM), Air horn, Driver assistance system: High beam assist and cornering light, Cab: with air suspension, Suspension: Front springs 8.0 t, 2-leaf, Fire extinguisher, 12-speed gearbox - Type: G 281-12, Rear LED tail lights, Integral rear panel, Folding table in side panel, Automatic climate control, 3-piece fender, Fuel tank: 630 L aluminum, left, Fuel tank: Additional tank 430 L aluminum, right, Cool box / refrigerator, Aerodynamic roof deflector (lockable) and side air deflectors, Mounting plate / saddle plate 40 mm for 20 t fifth wheel coupling, Reinforced engine brake, Wheelbase variant 3850 mm, Frame overhang 1050 mm, Smoker package, Rain sensor, Tire pressure monitoring system, Acoustic reversing warning and warning flasher (external warning signal), Fifth wheel coupling: manually lubricated, MirrorCam switch at bed, Electric sliding/lifting roof (glass), Additional remote key (2), Telematics/ Fleet management interface, Drawers under panel, Seat upholstery: passenger seat velour, Seat upholstery: driver seat velour, Cab seats: driver comfort suspension seat, Steel rims 11.75x22.5 (front axle), Electric auxiliary air-conditioning, External storage flap left, Additional 12V / 15A socket in passenger footwell, Sleeper cab curtain, Safety belt warning device Additional equipment: Emission standard EURO 6, Axle configuration: 4x2, Actros 5, Actros L cab, Heated entry/front mirrors, Trailer electrical and brake connection low position, Trailer socket 24V / 15-pin, Entry step left side cab, Exhaust right side, Equipment package: Powertrain 2, Exterior mirror camera MirrorCam, Batteries arranged side by side, Rear axle differential lock, Torque increase in 12th gear, Compressed air connection in cab, Steel air reservoir, Air system with condensate monitoring, Medium air system, Automatic headlight activation (light sensor), Driver assistance system: Attention Assist (fatigue detection sensor), Driver assistance system: Autonomous emergency brake assist (Active Brake Assist 5), Driver assistance system: Lane keeping assist, Cab: Cab entry...

Condition: used, Year of construction: 2014, functionality: limited functionality, travel distance X-axis: 3,048 mm, travel distance Y-axis: 2,032 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 15 m/min, spindle speed (min.): 3,000 rpm, spindle speed (max.): 24,000 rpm, spindle motor power: 12,000 W, We are offering this used Buth Graviersysteme PRO 2030 ATC CNC milling machine, year of manufacture 2014. Manufacturer: Buth Graviersysteme GmbH & Co. KG Model: PRO 2030 ATC Serial number: 150622 Year of manufacture: 2014 Condition: used Electrical connection voltage: 380–400 V Electrical connection frequency: 50 Hz Technical specifications: - Working area: 3048 x 2032 x 300 mm (X x Y x Z) - Table: Phenolic vacuum high-pressure table - Feed rate: 35 m/min (X/Y), 15 m/min (Z) - Drives: 850W YASKAWA AC servomotors - Resolution: 0.001 mm, repeatability: 0.01 mm - Data formats: HPGL – 3D / G-code - Spindle: 12 kW HSD, 8-position carousel tool changer - Speed: 3,000 – 24,000 rpm - Tool holder: HSK63 / ER40 / 26 mm - Weight: approx. 4,500 kg - Control: Fagor 8055 plus CNC controller - Connections: 380/415 V / 50 Hz Equipment & accessories: - Robust steel base frame - Precision ball screws on all axes (X axis with dual drive) - High-precision linear guides - Protective covers for drive axes - Extraction hood for chip extraction - Automatic mist cooling (2 containers) - Material sensor - Planing head 80 mm with HSK63 holder - Becker U4.250 SA/K vacuum pump, 3 mbar final pressure - Ulmatec extraction unit IES 2-8-2 / 2.2 MD - Control software / milling software - 8x HSK63 tool holders - ER40 collet chuck set (3–26 mm diameter) Condition & maintenance: The machine is in good used condition and was in regular operation until recently. Important for the future buyer: Currently, the machine is out of service as the bearings and drive belts need to be replaced. The milling machine generally operates, but both axes no longer run precisely parallel – a normal wear issue that can occur with machines of this type after some time. These works should be carried out once the machine is located at the buyer’s site. Cgedpfx Aoyazaqebbon Transport and installation can be handled by Buth Graviersysteme. If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: new, The VHF 1.1 is a compact and versatile Conventional Vertical Milling Machine in the Universal Milling Machines category, designed by KNUTH. This universal milling machine boasts a robust frame made of vibration-dampening cast iron, ensuring stability during operations. Equipped with a horizontal spindle and a swiveling vertical milling head, the VHF 1.1 allows for infinitely variable spindle speed and feed on the X-axis, making it ideal for diverse applications in training departments, repair shops, and model-making workshops. Its 1.000 x 240 mm setup area and 535 mm travel on the X-axis facilitate various machining tasks, while the included coolant system and chip tray enhance functionality and cleanliness. Users benefit from the extensive standard equipment, which includes a 3-axis position indicator, drill chuck, reducing sleeves, and more. With its precise and powerful performance, the VHF 1.1 is an outstanding choice for anyone in need of a reliable milling machine. Don’t hesitate to request a quote and elevate your milling capabilities today! Cgedpfx Absuyh Egsbsn

Condition: new, The VHF 3.2 is a robust and versatile universal milling machine that fits seamlessly into the category of Conventional Vertical Milling Machines and the product group of Universal Milling Machines. This high-performance model enhances the proven capabilities of the VHF series, featuring a combination of a horizontal spindle and a swiveling vertical milling head, which expands its range of applications. Built with a rigid machine bed from high-strength HT-200 cast iron and equipped with precision-made headstock gears, the VHF 3.2 offers durability and reliability. Its extensive setup area of 1,370x320 mm and the ability to handle angular bores make it suitable for diverse tasks in both repair workshops and educational settings. The machine’s powerful servo-motor provides infinitely variable feed across all three axes, facilitating efficient operations. One can enjoy minimal downtime thanks to rapid positioning of the work table, alongside a comfortable control panel swiveling to enhance usability. Request a quote today to explore how the VHF 3.2 can elevate your machining capabilities in the realm of Conventional Vertical Milling Machines and Universal Milling Machines. Cgodpfx Absn E Ni Hjbsn

Condition: new, Year of construction: 2025, Universal milling and drilling machine. X 600 mm Y 500 mm Z 450 mm - Heidenhain TNC 620 with ABENE/HEIDENHAIN software for easy operation - 2-stage gearbox, with frequency-controlled spindle motor 55 - 4,000 rpm. - 1 LED machine light 24 V / 70 W - HR-510 electronic handwheel for X, Y and Z axis - Complete electrical equipment for 400 V 3 phases 50 Hz. - Transformer for 24 V control voltage. - All fuses in the electrical cabinet are automatic. - Mechanical longitudinal, transversal and vertical feed - AC motor spindle, 7,5 kW - Spindle for Z axis, diameter 40 mm, ball screw. - Spindle for X and Y axis, with backlash free ball screw. Ø 32 mm. - All guides are hardened and ground. - An automatic central lubrication system lubricates all guides and ball screws. ball screws. Cedpei Hqhmsfx Abbegn - AC servo motors with infinitely variable control by Heidenhain TNC 620. - Chip tray, extendable - Collision protection monitoring in all axes by electronic threshold value monitoring - Keys, operating instructions, spare parts catalog and acceptance protocol. - Mechanical handwheels in all axes (option) - Table enclosure - Key switch to select between manual and automatic mode. We offer you a machine that is ideally suited for education and training. Our machine is characterized by its robust construction and allows precise machining of the workpieces. Thanks to its features, it is ideal for use in the training workshop or in professional training. The machine makes it possible to gain practical experience in CNC manufacturing and to deepen the understanding of CNC technology. Our machine is located in our warehouse in Pfullingen and can be inspected at any time. We would also be happy to allow you to perform a test machining to demonstrate the machine's capabilities. You will quickly discover how easy and efficient our machine is to operate. We offer you the machine at a fair price. Feel free to contact us for more information or to request a quote. We are confident that our machine will meet your requirements and look forward to your inquiry.

Condition: new, Year of construction: 2025, functionality: fully functional, feed length X-axis: 800 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 2 m/min, spindle speed (max.): 5,000 rpm, spindle speed (min.): 55 rpm, quill stroke: 75 mm, quill travel distance: 75 mm, quill diameter: 80 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 2 m/min, table width: 500 mm, table length: 900 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 55 rpm, table load: 400 kg, overall weight: 2,700 kg, workpiece weight (max.): 400 kg, warranty duration: 12 months, Equipment: documentation/manual, rotational speed infinitely variable, ABENE VHF 380 CNC – Universal Milling and Drilling Machine (NEW) Condition: New Location: Pfullingen (Germany) Inspection: Under power, ready for demonstration Cedpfx Abswf E R Eobsgn Technical Specifications Travel paths: X = 800 mm | Y = 500 mm | Z = 475 mm Control: Heidenhain TNC 620 with ABENE/Heidenhain software Spindle speed: 55 – 5,000 rpm (2-speed gearbox, frequency-controlled) Spindle taper: SK 40 (DIN 2080 / 69871 / 7388) Spindle motor: 7.5 kW AC motor Feed rates: X/Y up to 5,000 mm/min, Z up to 2,000 mm/min Swiveling head: 0 – 140° Table size: 900 × 500 mm T-slots: 7 × 14 mm (1 × H7) Max. table load: 400 kg Machine dimensions (W × D × H): approx. 2,300 × 2,450 × 2,200 mm Weight: approx. 2,700 kg Features • Heidenhain TNC 620 with ABENE software for ease of operation • Electronic handwheel HR-510 for X, Y and Z axes • AC servo drives with stepless control • Automatic central lubrication of all guideways and ball screws • Hardened and ground guideways • Collision protection monitoring on all axes • Extendable chip tray • LED machine light 24 V / 70 W • Complete electrical installation 400 V / 3 Ph / 50 Hz • Table enclosure with sliding door • Includes operating manual, spare parts catalogue and inspection certificate Description The ABENE VHF 380 CNC is a universal milling and drilling machine "Made in Sweden" with the proven ABENE slant bed concept. It combines precision, stability, and simple operation – ideal for training, toolmaking, and single-piece or small batch production. Thanks to the intuitive Heidenhain TNC 620 control, the machine is especially user-friendly and perfectly suited for deepening practical CNC skills. The machine is available for viewing and testing under power at our warehouse in Pfullingen. We are happy to arrange a demonstration appointment!

Condition: used, mileage: 132,000 km, power: 103 kW (140.04 HP), first registration: 04/2018, fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, For sale is a well-maintained Volkswagen Crafter Panel Van L2-H2 equipped with the globally popular 2.0-liter diesel engine. The vehicle is in good condition! * German specification vehicle * Regularly serviced * Euro 6 emissions standard Cgjdpjyafvpsfx Abbjn * 2nd owner Features: Panel Van L2-H2 * Air conditioning * Cruise control * Navigation system * Tow bar * Reversing camera * Front and rear parking sensors (PDC) * Heated seats for driver and passenger * Multifunction steering wheel * Passenger airbag * N1 registration * Electrically adjustable exterior mirrors * Electric windows * Central locking * and much more... Technical data: * Permissible total weight: 3,500 kg * Curb weight: 2,050 kg * Payload: 1,450 kg * Towing capacity: 3,000 kg Why are we the right choice? Attractive financing available through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your existing vehicle at fair rates * Temporary registration plates (5-day / export registration) usually available the same day * Pick-up service from the airport or train station All vehicles are professionally prepared and hygienically clean! Highlights: Interior and ventilation system disinfected with ozone treatment. 2-stage polish on the exterior, and if necessary, paint correction and smart repair. All our vehicles have also undergone thorough maintenance – including new fluids, filters, and any other consumables, so you don't have to worry about these matters. Optionally, we can have the vehicle inspected by an independent testing organization or workshop of your choice. We appreciate your interest and are available around the clock for any inquiries. If you have questions, comments, or special requests, please do not hesitate to contact us! More information and insights into our company philosophy available upon request. Special equipment: Driver/passenger front airbags, passenger airbag deactivation, Discover Media audio navigation system (touchscreen color display), Light and Visibility package, electrically adjustable and heated exterior mirrors, roof vent in load/passenger compartment with closure, parking assistance system front and rear, 2 folding remote keys, vehicle without type designation, cruise control system including speed limiter, metallic paint, multifunction steering wheel, side marker lights, reversing camera, rear door hinges with extended opening angle, heated driver and passenger seats, ERGOActive suspension seat for driver (20-way adjustment, massage function), rear step, high-quality wood lining in load/passenger compartment, lashing rails on side and partition walls, winter package. Further equipment: Convex exterior mirror left, convex exterior mirror right, LED indicators integrated in exterior mirrors, rubber flooring in driver's cab, on-board tools, underbody aerodynamic cover, double headlamps, dual-tone horn, rear left entry grab handle, rear right entry grab handle, hill-hold assist, brake assist system (HBA), crosswind assist, front electric windows, A-pillar grab handles, rear wing doors without glazing, LED interior lighting for driver's cab, LED interior loading compartment lights, bodywork

Condition: used, mileage: 132,000 km, power: 103 kW (140.04 HP), first registration: 04/2018, fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, For sale here is a well-maintained Volkswagen Crafter Panel Van L2-H2 with the globally popular 2.0-liter diesel engine. * The vehicle is in good condition! * German specification vehicle * Regularly serviced * Euro 6 emissions standard * Second owner Equipment: * Panel van L2-H2 * Air conditioning * Cruise control * Navigation system * Tow bar * Rear-view camera * Front and rear parking sensors (PDC) * Heated seats for driver and passenger * Multifunction steering wheel * Passenger airbag * Registered as a commercial vehicle/truck * Electrically adjustable exterior mirrors * Power windows * Central locking * And much more... Technical Data: * Permissible gross vehicle weight: 3,500 kg * Curb weight: 2,050 kg * Payload: 1,450 kg * Towing capacity: 3,000 kg Why choose us? Attractive financing options through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair conditions * Transit license plates (5-day plates / export registration) often available on the same day * Pick-up service from the airport or railway station Cgsdoyafu Espfx Abben All vehicles are professionally reconditioned and hygienically clean! Special features: Disinfection of interior and ventilation system using ozone cleaning. 2-stage exterior polishing * If necessary, paint correction and smart repair All our vehicles have also undergone thorough servicing. Of course, this includes all new fluids, filters, and other necessary maintenance, so you do not have to worry about anything. Optionally, we can present the vehicle at an independent inspection station or workshop of your choice. We look forward to your inquiry and are available around the clock for you. If you have questions, comments or special requests, please do not hesitate to contact us! More information and insights into our business philosophy are available at Special equipment: Driver and passenger airbags, passenger airbag can be deactivated, Discover Media audio navigation system (touchscreen color display), Light & Vision package, electrically adjustable and heated mirrors, roof ventilator in the cargo/passenger area with closure, driver assistance system: parking aid front and rear, two folding radio keys, vehicle without model designation, cruise control including speed limiter, metallic paint, multifunction steering wheel, side marker lights, rear-view camera, hinges for rear doors with increased opening angle, heated driver and passenger seats, ErgoActive suspension seat for driver (20-way adjustment, massage function), rear step on the right, high wooden panelling in cargo/passenger area, securing rails in load compartment - on side wall and partition, winter package Additional features: Convex exterior mirror, left/right, LED indicators integrated into exterior mirrors, driver's cab floor with rubber covering, on-board tools, underbody aerodynamic cladding, double headlamps, twin-tone horn, rear left/right entry handle at rear pillar, hill start assist, brake assist (HBA), crosswind assist, electric front windows, A-pillar grab handles, rear wing doors without glazing, driver's cab LED interior lights, load compartment interior lights, etc.

Condition: used, Year of construction: 1996, sheet width 2040 mm plate thickness 4.0 mm ST plate thickness 6.0 mm ALU thickness at "Niro-steel" 2.5 mm distance between columns 2100 mm no. of strokes ca. 32 Hub/min cutting angle 2.0 ° table height ca. 820 mm Control SCHRÖDER / ELGO Cedpfx Abexaa Edsbogn total power requirement 5.5 kW weight 3250 kg range L-W-H 2400 x 1400 x 1100 mm From a maintenance workshop Current new price approx. 35.000 euros Special price upon request The MSS motorized guillotine shear was developed for sheet metal and plastic processing. With these shears, you can effortlessly produce clean cuts in series. The MSS "oscillating cut" is the elegant and powerful way to cut. Thanks to the oscillating cut technology, the applied force is optimally converted into a cutting movement, giving the machine power reserves. Features: - Robust, motorized swing-cut guillotine shears - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - NC electro-motorized backgauge * with SCHRÖDER / ELGO NC control unit - Manual cutting gap adjustment * Centralized - adjustable with a simple handle - 1x hold-down bar - 1x sturdy 1.000 mm side stop - including T-slot and mm scale - 2x front support arms 1.000 mm - Grip recesses in the support table - 1x freely movable foot switch - Rear sheet chute - Operating instructions

Condition: used, Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: Ankerwerk Nuremberg AEG, geared motor with brake -Gear: Armature movement CAM 76 N 1 i= 33 -Speed: 43 rpm -Engine: AEG type AM 80 N4 -Power: 0.75 kW / 1400 rpm -Shaft: Ø 32 x 78 mm Csdpfxjrgtd Hs Abbjgn -Dimensions: 525/240/H275 mm -Weight: 50 kg

Condition: good (used), Globoid gear, indexing, oscillator indexer, index gear, rotary index drive -Manufacturer: CAMCO, index gear -Type: MSHV40A917-Y7A -Overload clutch: 11FC-SD -Shaft: Ø 55x45 / 35x80 / 35x75 mm -Translation: 20 rev. = 90° -Dimensions: 815/720/H585 mm -Weight: 327 kg Csdjwz Idtjpfx Abbjgn

Condition: used, Globoidal cam gears, indexing, oscillator indexer, index gear -Manufacturer: Manifold, Transmission Clutch Indexing -Type: V-1-C 5 120 -Shaft: Ø 48 x 145 mm Codpfx Aberiidyjbogn -Indexing angle: 120° -Number of stops: 5 -Dimensions: 400/385/H395 mm -Weight: 151kg

Condition: used, Globoid gear, indexing, oscillator indexer, index gear -Manufacturer: Manifold, gearbox from rotary indexing table type RTU 800 8-150 Cgodpfx Abjrub H Tjbon -Translation: i = 1:8 45° -Dimensions: see photos -Quantity: 2x gears available -Price per piece -Dimensions: 470/375/H500 mm -Weight: 172 kg/pc.

Condition: good (used), Frequency converter, frequency converter, drive converter, controller, variable speed drive -Power: 3.12 kVA -Input: 3x 208-240V 12.0A OR 1x220-240V -Output: 3x 0-220 V Cgedpfxscaq Dke Abbsn -Output frequency: 500 Hz -Number: 1x converter available -Dimensions: 110/250/H180 mm -Weight: 2.2 kg

Condition: good (used), Cam switches, circuit breakers, motor protection switches, step switches, rotary switches -Type: WAA477/100 VZ Cgsdpfsfmldmjx Abben -Voltage: AC-3 kW 3 ph 380 V/440 V 125 A -Dimensions: 330/95/H130 mm -Weight 2.3 kg

Condition: good (used), mileage: 837,031 km, power: 310 kW (421.48 HP), first registration: 10/2019, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2019, Equipment: AdBlue, air conditioning, cruise control, electric window regulation, fog lights, navigation system, parking heater, power mirror, seat heater, second fuel tank, soot filter, spoiler, - Aluminum fuel tank - Leaf suspension - Power brake booster - Low noise - Motorcycle cover tarpaulin - Particulate filter - Radio/CD player - Sliding roof Csdpjw Shr Rofx Abbjgn - Sleeper cab - Side door - Seat heating - Auxiliary heating - Toolbox Front axle: Steered; Suspension: Leaf springs Rear axle: Suspension: Air suspension Unladen weight: 8,245 kg Payload: 10,755 kg Gross vehicle weight (GVW): 19,000 kg Technical condition: good Visual condition: good Please contact Emad Al Shogran for further information. Vehicle number: 163 Mercedes Benz Actros 5 / 1942 / Mirror CAM / StreamSpace / Euro 6 .: WDF9634031C011747 Suspension: Leaf / Air Transmission: Automatic Air conditioning Engine brake Cruise control Auxiliary heating Distance assist Lane keeping assist Navigation system Emission standard EURO 6 Special equipment: Axle load measuring device, alarm system, trailer electrical and high brake connection, work lights, air horn, suspension: front spring bracket aluminum, suspension: front springs 7.5 t, 2-leaf, 12-speed transmission - Type: G 211-12, integral rear, upper comfort berth, wide, 3-piece mudguard, fuel tank: combo tank aluminum - 820 l diesel + 90 l urea solution (AdBlue), fuel tank: additional tank 430 l aluminum, right, roof air deflector (lockable) and side panels, mounting plate / fifth wheel plate 12 mm for fifth wheel coupling, programmable special module, wheelbase variant 3,700 mm, frame height lowered by 25 mm, frame overhang 1,050 mm, fifth wheel coupling: manually lubricated, fleet management system interface, seat upholstery: passenger seat velour, seat upholstery: driver's seat velour, seats in cab: driver's comfort air-sprung seat, external sun visor, external storage flap left, additional 24V socket in passenger footwell Other equipment: Emission standard EURO 6, storage above the windscreen with lid, axle configuration: 4x2, front axle load 7.5 t, Actros 5, Actros cab L, heated front and approach mirrors, trailer socket 24V / 15-pin, cab entrance left, exhaust to right outside, equipment package: Powertrain 2, exterior mirror camera MirrorCam, battery 220 Ah, batteries mounted side by side, rear axle differential lock, 12th gear torque increase, compressed air connection in cab, steel compressed air tank, air processing unit with condensate monitoring, medium air processing unit, automatic headlight activation (light sensor), driver assistance system: Attention Assist (fatigue detection sensor), driver assistance system: Autonomous Emergency Brake Assist (Active Brake Assist 5), driver assistance system: lane keeping assist, cab: fixed cab entry, cab: chrome interior package, cab: hydraulic tilting device, cab: L StreamSpace, 2.50 m, flat floor, cab: steel-sprung, comfort, vehicle outline lights LED, suspension: leaf/air, electric windows, vehicle without rear window, alternator 100 A, regulated, speed limiter, rear axle with active lubrication, unregulated, rear axle ring gear 440, body/superstructure: tractor unit, lower comfort berth, central locking system, power steering pump electronically regulated, multifunction steering wheel, air intake behind cab, 2-stage air compressor, heated air dryer, engine 12.8 L - 310 kW R6 diesel (OM 471), engine brake, engine variant...

Condition: good (used), mileage: 328,776 km, power: 350 kW (475.87 HP), first registration: 03/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,850 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2023, Equipment: AdBlue, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, navigation system, parking heater, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, - Adaptive cruise control - Aluminum fuel tank - Leaf spring suspension - Bluetooth - Power-assisted brakes - EPS (Electric Power Steering) - Remote central locking - Low noise - Speed limiter - Intarder - Load guard - Particulate filter - Radio/CD player - Rain sensor - Sliding roof - Sleeper cab - Side door - Seat heating - Sun visor - Lane keeping assist - Auxiliary heater (parking heater) - Toolbox - Xenon headlights Front axle: Steered; Suspension: Leaf springs Rear axle: Suspension: Air suspension Unladen weight: 8,250 kg Payload: 12,250 kg Gross vehicle weight (GVW): 20,500 kg Technical condition: good Optical condition: good Reference number: 74 Vehicle number: 74 Mercedes Benz Actros 5 / 2148 / Mirror CAM / BigSpace / Euro6 .: W1T9634051C054039 Suspension: Leaf / Air Transmission: Automatic Cedpfx Asx Urc Hebbjgn Air conditioning Engine brake Cruise control Auxiliary heater (parking heater) Distance assist (adaptive cruise control) Lane keeping assist Navigation system Emission standard EURO 6 2 x fuel tanks Special equipment: Axle load measuring device, front axle load 8.0 t, 15-pin trailer socket 7+7-pin, Audio system: Digital radio DAB / DAB+, Equipment package: Media, Equipment package: Safety, Equipment package: Storage, Battery 220 Ah (AGM), Air horn, Driver assistance system: High beam assist and cornering light, Cab: with air suspension, Suspension: Front springs 8.0 t, 2-leaf, Fire extinguisher, 12-speed transmission - Type: G 281-12, LED rear lights, Integral rear, Folding table in cab, Automatic climate control, 3-piece mudguard, Fuel tank: 630 L aluminum, left, Auxiliary fuel tank: 430 L aluminum, right, Refrigerator / cooling box, Roof and side aerodynamic deflectors (adjustable), Mounting plate / fifth wheel plate 40 mm for 20 t fifth wheel coupling, Reinforced engine brake, Wheelbase variant 3850 mm, Rear overhang 1050 mm, Smoker's package, Rain sensor, Tire pressure monitoring system, Acoustic reverse warning and warning flash light (external warning signal), Fifth wheel: manually lubricated, MirrorCam switch at bed, Electric tilt/sliding glass roof, Additional remote control key (2), Fleet management system interface, Drawers under cab, Seat cover/upholstery: passenger velour, Seat cover/upholstery: driver velour, Seats in cab: Comfort driver's air-suspension seat, Steel rims 11.75x22.5 (front axle), Electric stationary air conditioning, External storage compartment, 12V / 15 A socket in passenger footwell (additional), Sleeper cab curtain, Seat belt warning system Further equipment: Emission standard EURO 6, axle configuration: 4x2, Actros 5, Actros L cab, heated entry/front mirror, low-level trailer electrical and brake coupling, 24V / 15-pin trailer socket, Driver's side cab access, Exhaust outlet right, Equipment package: Powertrain 2, Door mirror camera MirrorCam, Side-by-side batteries, Rear axle differential lock, 12th gear torque increase, Air connection in cab, Steel air tank, Condensate monitoring air unit, Medium size air unit, Automatic driving light activation (light sensor), Driver assistance system: Attention Assist (fatigue detection sensor), Driver assistance system: Autonomous emergency brake assistant (Active Brake Assist 5), Driver assistance system: Lane Keeping Assist, ...

Condition: good (used), mileage: 238,911 km, power: 350 kW (475.87 HP), first registration: 05/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,850 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2023, Equipment: AdBlue, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, navigation system, parking heater, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, - Adaptive cruise control - Aluminium fuel tank - Leaf spring suspension - Bluetooth - Brake booster - EPS (Electric Power Steering) - Remote central locking - Low noise - Speed limiter - Intarder - Load protection grille - Particulate filter - Radio/CD player - Rain sensor - Sliding roof - Sleeper cab - Side door - Seat heating - Sun visor - Lane keeping assistant - Auxiliary heater (parking heater) - Toolbox - Xenon lighting Front axle: Steered; Suspension: Leaf spring Rear axle: Suspension: Air suspension Unladen weight: 8,250 kg Payload: 12,250 kg Gross vehicle weight: 20,500 kg APK (Main technical inspection): valid until 06/2026 Cgjdpfsx Urcyjx Abbon Technical condition: good Optical condition: good Vehicle number: 105 Mercedes Benz Actros 5 / 2148 / Mirror CAM / BigSpace / Euro6 Chassis no.: W1T9634041C057286 Suspension: leaf / air Transmission: automatic Air conditioning Engine brake Cruise control Auxiliary heater (parking heater) Adaptive cruise control Lane keeping assistant Navigation system Emission standard: EURO 6 2 x fuel tanks Special equipment: Axle load - measuring device, front axle load 8.0 t, trailer socket 15-pin + 7+7-pin, Audio system: digital radio DAB / DAB+, Equipment package: Media, Equipment package: Safety, Equipment package: Storage, Battery 220 Ah (AGM), Air horn, Driver assistance system: main beam assist and cornering light, Cab: with air suspension, Suspension: front springs 8.0 t, 2-leaf, Fire extinguisher, 12-speed gearbox - Type: G 281-12, LED tail lights, Integral rear, Folding table in console, Automatic climate control, 3-piece mudguards, Fuel tank: 630 l aluminium, left side, Additional fuel tank: 430 l aluminium, right side, Cool box / refrigerator, Roof air deflector (adjustable) and side deflectors, Mounting plate / fifth-wheel plate 40 mm for 20 t fifth wheel coupling, Reinforced engine brake, Wheelbase variant 3,850 mm, Frame overhang 1,050 mm, Smoking package, Rain sensor, Tyre pressure monitoring system, Acoustic reverse warning and external warning hazard light (external warning signal), Fifth wheel coupling: manually lubricated, MirrorCam switch at bed, Electric sliding/lifting roof (glass), Spare key with remote (2), Fleet management system interface, Drawers under console, Seat cover/upholstery: passenger seat velour, Seat cover/upholstery: driver seat velour, Cab seats: driver's comfort air suspension seat, Steel wheels 11.75x22.5 (on front axle), Electric auxiliary air conditioning, External storage hatch left, Additional socket 12V / 15 A in passenger footwell, Sleeper cab curtain, Seat belt warning device Further equipment: Emission standard: EURO 6, Axle configuration: 4x2, Actros 5, Actros cab L, Heated entry/front mirrors, Trailer electrical and brake connection low, Trailer socket 24V / 15-pin, Entry step driver's cab left, Exhaust outlet to right, Equipment package: Powertrain 2, Exterior mirror camera MirrorCam, Batteries mounted side by side, Rear axle differential lock, 12th gear torque increase, Compressed air connection in cab, Steel compressed air tank, Condensate monitoring unit for compressed air, Medium compressed air unit, Automatic driving light activation (light sensor), Driver assistance system: Attention Assist (fatigue detection sensor), Driver assistance system: Autonomous emergency braking system (Active Brake Assist 5), ...

Condition: used, mileage: 5,000 km, power: 110 kW (149.56 HP), first registration: 10/2024, color: black, gearing type: automatic, suspension: other, number of seats: 5, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, second-hand vehicle warranty, traction control, Roadworthy, excellent condition, accident-free, demonstration vehicle, metallic paint, 5-door, one owner, start-stop system, Euro 6d emissions standard, green emissions sticker (category 4), fabric upholstery, Apple CarPlay, Android Auto, grey, rearview camera, leather steering wheel, paddle shifters, LED headlights, automatic lighting control, Keyless-Go, front parking sensors, self-parking system, rear parking sensors, parking assistance, parking camera, park assist, digital radio (DAB), rain sensor, traffic sign recognition, ambient lighting, emergency call system, hill start assist, tire pressure monitoring system, electronic traction control system, electric windows, Bluetooth hands-free kit, multifunction steering wheel, USB port, cabin air filter, tinted windows, heated steering wheel, electric exterior mirrors, speed limiter, adjustable steering column, center armrest, lane keeping assist, drowsiness detection, high beam assist, automatic transmission, onboard computer, start-stop system, paddle shifters. Driver assistance systems: drowsiness detection, traffic sign recognition, park steering assistant, rain sensor, high beam assistant, light sensor, hill start assist, lane keeping assist. Comfort features: automatic climate control, electric windows, electric exterior mirrors, multifunction steering wheel, center armrest, interior filter, adjustable steering column, front and rear park distance control, keyless entry, ambient lighting, leather steering wheel, speed limiter, remote control. Visibility: LED main headlights, LED tail lights, fog lights, rearview camera, privacy glass. Safety: ABS, airbag, immobilizer, ESP, tire pressure monitoring, traction control, emergency call system. Entertainment: navigation system, USB port, Bluetooth, Apple CarPlay, Android Auto, DAB radio. Environment: Euro 6d emissions standard, green emissions sticker. Quality: warranty. Other features: metallic paint, heated steering wheel. Ref: 011744. Subject to change, prior sale, and errors. Quality by dotzilla. Csdpfx Abjwulb Ajbogn

Condition: used, mileage: 8,000 km, power: 85 kW (115.57 HP), first registration: 02/2025, color: grey, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 5, Equipment: ABS, airbag, central locking, differential lock, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, second-hand vehicle warranty, traction control, Roadworthy, touchscreen, superb condition, accident-free, demonstration vehicle, metallic paint, 5-door, one owner, full service history, start-stop system, no environmental badge (category 1), fabric upholstery, Apple CarPlay, Android Auto, wireless smartphone charging, fully digital instrument cluster, distance warning system, rear view camera, black, dual-zone automatic climate control, front side airbags, passenger airbag, front head/curtain airbags, rear head/curtain airbags, height-adjustable front seats, navigation system with display, leather steering wheel, LED headlights, automatic light control, keyless entry and start (Keyless-Go), front parking sensors, rear parking sensors, parking assist, parking camera, adaptive cruise control (Distronic), daytime running lights, LED daytime running lights, emergency brake assist, digital radio, rain sensor, traffic sign recognition, digital speedometer, ambient lighting, emergency call system, cornering light, adaptive cornering lights, hill start assist, tire pressure monitoring system, traction control, electronic traction system, four power windows, heated seats, heated front seats, telephone pre-wiring, hands-free system, Bluetooth hands-free, multifunction steering wheel, radio, radio/MP3, MP3 interface, radio/CD, USB port, AUX-In port, outside temperature display, cabin air filter, tinted glass, privacy glass in the rear, foldable exterior mirrors, heated exterior mirrors, auto-dimming mirrors, auto-dimming interior mirror, power steering, non-smoker vehicle, electric exterior mirrors, Servotronic, alarm system, brake assist, adaptive cruise control, ISOFIX child seat mounting, split rear bench seat, alloy wheels, adjustable steering column, luggage compartment cover, center armrest, winter package, lane departure warning, driver fatigue detection, high beam assist, new TÜV/roadworthiness certificate, manual transmission. Technical features: on-board computer, start-stop system, fully digital instrument cluster. Assist systems: driver fatigue detection, traffic sign recognition, rain sensor, high beam assistant, light sensor, emergency brake assistant, hill start assist, lane departure warning, adaptive cruise control. Csdpfxox Hhaxo Abbegn

Condition: new, Year of construction: 2026, functionality: fully functional, Pros: • comprehensive processing (cutting, drilling, milling, engraving) • stable structure guaranteeing maximum precision and reliability • table with a vacuum system • free access to the machine enabling operation by one operator • the possibility of placing the entire palette of plates on the tray CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 150 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. Cgsdpfeur N A Nsx Abbon SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2026, The CNC 2030 SPECIAL milling plotter is a high-precision machine built in Poland, used for machining many engineering materials, i.e.: wood, wood-based (chipboard, MDF, OSB, etc.), plastics (Plexiglas, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Cgsdpjirmgfefx Abben CONSTRUCTION: The plotter is made entirely of high quality steel. During the manufacturing process, all components undergo a special heat treatment. WORKING SURFACE: The working area of our machine tool is 2100 x 3100 [mm]. It is possible to manufacture the machine with a different working area. Z-AXIS RANGE AND GANTRY CLEARANCE: The Z-axis range is 200 mm as standard. However, it is possible to increase it to 400 mm. DRIVES: High-resolution, high-power digital motors have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. The X and Y axes use classic and well-proven helical slats, which ensure long service life and precision, and a high-performance ball screw is used to drive the Z axis. SPRING: A powerful, liquid-cooled and durable high-end brushless spindle is used to drive the cutting tool. The spindle bearings are high-quality machine bearings, which are very quiet and guarantee above-average durability. The spindle speed ranges from 6 to 24,000 rpm. SOFTWARE: The machine has been provided with suitable, easy-to-use CAD/CAM software in the latest version. CONTROL: This is done by means of a controller, which has its own processor and operating memory to ensure stable and reliable operation. The controller has a function to return to further operation after power loss so there is no need to initialise the program from scratch. VACUUM TABLE: The table is made with raster technology, thanks to the sections used we can separate any part of the table with a seal. This allows us to adapt the working area to the specific workpiece. A well-chosen vacuum pump according to the size of the table will guarantee uniform suction of the material to the table. 6-POSITION LINEAR TOOL MAGAZINE: The linear magazine enables an automatic machining process. It is used for multi-tool machining. In addition, it allows for faster and more efficient work and contributes to the elimination of operator errors. The standard magazine on our machines is for 6 positions. It can be extended to 16 positions. Oscillating knife The oscillating knife is a state-of-the-art head fitted to CNC machines, designed for cutting low-density materials. The blade moves up and down and thus 'slices' the material. This makes it possible to cut thick, soft materials - FOAM foam, magnetic foils, corrugated cardboard, textiles.

Condition: new, Year of construction: 2026, Router CNC2030 ATC 4 axes, tilting spindle +/- 90 degrees working area 2100 x 3000 [mm] The ATC series of plotters was created for professional use in large industrial plants and factories. These machines are designed to process a wide range of materials. In order to meet the demands of heavier machining, the ATC machines feature an additionally reinforced construction and more powerful AC servo drives on each axis. A vacuum work table is standard on these machines. It is also possible to install a hybrid table. Plotters in this series are equipped as standard with automatic tool changing, a six-position linear magazine and a tool height sensor. The solutions used significantly speed up the machining process requiring the use of several cutters. Materials to be machined: wood wood-based materials (chipboard, MDF, OSB, etc.) plastics composites PVC non-ferrous metals (aluminium, brass, copper, etc.) CONSTRUCTION: The structure of the machine tool is made of steel and cast iron which gives it high rigidity, as well as resistance to the overloads associated with the machining process. WORKING SURFACE: The usable area of our machine tool is 2100 x 3000 [mm]. MATERIAL CLAMPING: The machine is equipped with a vacuum table. It is possible to install a hybrid or T-table. Z-AXIS RANGE AND GANTRY CLEARANCE: The Z-axis range is 300 [mm] as standard (can be increased). DRIVES: SERVO motors have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. The X and Y axes are driven using classic and proven helical rollers to ensure long service life and precision, while the Z axis is driven using a high-performance ball screw. All axes move on rail guides.... SPRING: A powerful, liquid-cooled and durable high-end brushless spindle is used to drive the cutting tool. The spindle bearings are high-quality machine bearings, which are very quiet and guarantee above-average durability. The spindle speed ranges from 6 to 24,000 rpm. The power supply is provided by an inverter, which has more power than the spindle, which protects against speed drops when operating under heavy load. TOOL STORAGE: The machine tool comes standard with a linear tool magazine equipped with 6 ISO30 cones. Cjdpfx Absirfavjbjgn SOFTWARE: The machine has been supplied with the appropriate CAD/CAM software in its latest version. The software makes it possible to design parts quickly and easily, which the programme then converts into so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is controlled by a controller, which has its own processor and operating memory to ensure stable and reliable operation. The machine controller is equipped with active vector analysis functions, so that operation of the machine is smooth and there is little overshoot during processing. The controller has a recovery function to continue operation after a power loss, so there is no need to initialise the programme from scratch. The controller's on-board memory allows the machine to work without having to load the programme each time.

Condition: new, Year of construction: 2026, The ATC series was created for professional use in large industrial plants and factories. Like the plotters of the SPECIAL series, it can be designed for machining various materials. To meet the demands of heavier machining, ATC machines use an additional reinforced structure and stronger AC servo drives on each axis. The presence of five axes provides support in the machining process of even the most demanding elements. The standard in these devices is a vacuum work table. It is also possible to install a hybrid table. The plotters in this series come standard with automatic tool change, a six-position linear magazine and a tool height sensor. The applied solutions significantly accelerate the machining process requiring the use of several milling cutters. Cgedoin Etzepfx Abben Processed materials: -wood - wood-based materials (chipboard, MDF, OSB, etc.) -plastics -Composites -PVC - non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. MATERIAL FASTENING: The machine is equipped with a vacuum table. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 300 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. TOOL MAGAZINE: The standard equipment of the machine is a linear tool magazine equipped with 6 ISO30 cones. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time.

Condition: new, Year of construction: 2026, 2030 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. Cgsdjin Eqfspfx Abben SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist