Used Vertical Machining for sale (64,975)

Condition: used, Year of construction: 1998, Technical details: x-travel: 760 mm y-travel: 550 mm z-travel: 300 mm control: Röders RMS 6 Vers. 2.70 spindle taper ISO: HSK E40 turning speed range: 42.000 stufenlos U/min spindle head swivable left - right: -52 ° / +5° (B-Achse) ° feed:: 0 - 30.000 mm/min Tool changer: 18-fach Werkzeuge + 2 places for Werkzeugvermessung Table dimensions: 860 x 550 mm table load capacity: 800 kp Number of working hours: siehe Foto h compressed air: 6,5 bar total power requirement: 20 kW weight approx.: 7000 kg dimension machine xH: 3,1 x 2,4 x 2,6 m dimension coolant device: ca. 0,6 x 0,8 x 0,7 m other features: Highspeed direct spindle digital axis drives AC servo motors ball screw spray cooling (microjet cooling jet and lubrication unit) working spindle Fischer MFW - 1230/42 up to 42.000 rpm tool measuring laser and probe system PS 25.00 Manual control unit Pgjdju Ndbpepfx Agweu Climatic cabinet Cooling water recooler Hyfra The machine can be demonstrated under power. *

Condition: used, Year of construction: 2011, x-travel 635 mm y-travel 510 mm z-travel 460 mm Control Heidenhain TNC 620 turning speed range 20 - 8.000 U/min number of tool places 20 Pos. tool taper SK 40 table surface area 790 x 560 mm spindle drive 13 kW Number of working hours ca. 3.870 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as Podsxp R Egjpfx Agwjgu subject to prior sale!

Condition: used, Year of construction: 2006, x-travel 1050 mm y-travel 510 mm z-travel 510 mm control Fusion 640 M Nexus spindle taper DIN 69871/SK40 Feed speed 8000 mm/min. turning speed range 35 - 12.000 U/min rapid travel x/y/z 36 m/min distance spindle /table max. 660 mm distance spindle /table min. 150 mm no. of tools in the magazine 30 Stück tool taper CAT 40 Tool diameter 80 mm wotkpiece diameter with 2 vacant positions max. 125 mm max. tool weight 8 kg max. tool length 350 mm table length 1300 mm table width 550 mm number of T-slots 3 T-slot - width 18 mm T-slot - distance 100 mm max. table load 1200 kg table height over floor 850 mm coolant tank 250 l coolant pump 4,5 bar internal coolant system feed 15 bar Podpsxp Rywjfx Agwjgu coolant capacity 271 l/min required air pressure 700 l/min spindle drive 18,5 connected load frequency 400 V connected load 36,6 kVA frequency 50 Hz Needed pneumatic pressure 5 (bei 200 l/min) bar weight of the machine ca. 6,9 t dimensions of the machine ca. 2,90 x 2,84 x 2,81 m Including special accessories: -Cooling through the spindle (15 bar) -Chip conveyor, hinged belt on the left side -Torque-dependent drilling cycle (Mazatrol) -Automatic determination of drilling depth increments after torque detection. (preferably in combination with HSS tool) -Interface set Contents: - Interface for keyboard - Interface for mouse - Interface for printer Retrofitting not possible Machine color gray / black -CNC Performance Option Package Package contents: - Shared variables (600 pairs) - MAZAK Tornado thread tapping (EIA/ISO) - Synchronous thread cutting - EIA/ISO input function - EIA/ISO special function Spiral interpolation (G02.1, G03.1), 3D tool correction (G40-G42) Scaling (G50, G51) etc. - EIA/ISO, Constant feed (G93) When using this function, the feed rate remains constant for straight and curved combinations on the contour. - EIA/ISO tool length measurement (G37) - EIA/ISO, programme unit stop function Programme sequence is automatically stopped at a specified programme unit. - MAZACC-2D (Mazatrol & EIA/ISO) Precision control function for precise vector interpolation and optimal acceleration and deceleration at edges and radii. This enables improved two-dimensional shape accuracy. - Additional workpiece coordinate system (G54.1 P1 - 48) 48 pairs - Spiral machining function (G33) for boring head machining (e.g. with d'Andrea tool) - Used machine without warranty - - All dimensions, weight and performance data are non-binding

Condition: used, Year of construction: 1998, x-travel 1.250 mm y-travel 880 mm z-travel 800 mm control TNC 426 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 500 Nm tool taper SK 40 table surface area 1.500 x 1.050 mm max. table load 2.500 kg number of T-slots 10 T-slot - width 18 H7 mm T-slot - distance 100 mm number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8 kg max. total weight 100 kg rapid traverse ( X / Y / Z ) 15 m/min feed speeds 10.000 mm/min total power requirement 29 kW weight of the machine ca. 16,0 t dimensions of the machine ca. 7,0 x 5,0 x 3,3 m CNC - Machining Center Vertical DECKEL MAHO - DMU 125 T - ICS Pedsxp Ry Dspfx Agwogu

Condition: like new (used), functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530, spindle speed (max.): 36,000 rpm, operating hours of spindle: 4,651 h, spindle nose: HSK 50, number of spindles: 15, Equipment: CE marking, documentation/manual, VERTICAL MACHINING CENTER MIKRON MODEL HSM 800 X-AXIS TRAVEL 800 mm Y-AXIS TRAVEL 600 mm Z-AXIS TRAVEL 500 mm SPINDLE HSK E 50 SPINDLE SPEED 36,000 RPM WORKPIECE PROBE LASER MEASUREMENT SYSTEM OPERATION AND MAINTENANCE MANUALS Pgodpfxsw U T Szs Agwou CE CERTIFICATION CNC HEIDENHAIN iTNC 530 REMOTE HANDWHEEL SIEMENS MOTORS AND DRIVES HEIDENHAIN LINEAR GLASS SCALE MEASURING SYSTEM TOTAL OPERATING HOURS: 6447 SPINDLE HOURS: 4651

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,317 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Hurco Max 5, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,067 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Pjdpfxjxrdxls Agwsgu Spindle speed (max.): 12,000 rpm Spindle power: 18 kW Spindle torque: 239 Nm MACHINE DETAILS Control model: Hurco Max 5 Weight: 7,100 kg Operating Hours Spindle hours: 3,317 h Operating hours: 8,634 h EQUIPMENT 40-position automatic tool changer (ATC) Internal coolant supply 20 bar Renishaw probe OMP60 Renishaw laser Software package DXF Software package for tool measurement Software package for workpiece measurement Software package NC Conversational Merge Software package tool change optimization

Condition: used, Year of construction: 2006, Technical details: x-travel: 1000 / 600 mm y-travel: 570 mm Pjdpfx Agju Idfrowsgu z-travel: 570 mm control: Fagor 8055 MC tool changer with: 24 Plätze tool taper: SK 40 Revolution per minute: 10 000 U/min. spindle taper: SK40 feed speeds infinitely variable: X/Y/Z: 10 m/min. rapid traverse:: X/Y/Z: 24 m/min. operating hours - idle run: nicht einsehbar h table-size: 1200 x 500 mm table load capacity: 800 kg distance spindle nose and table: min./max. 100/670 mm interface: 232 total power requirement: 15 kW Weight approx.: 5,0 t dimension machine xH: 3,3 x 2,3 x 2,8 m Equipment: -Cooling device with feed to the spindle (no CTS cooling through spindle)) -operating panel with manual control unit -chip conveyor -E-cabinet cooling Rittal SK 3305500 *

Condition: used, Year of construction: 2011, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control Siemens SlimLine Shopmill C-Axis 360 ° b-axis -5/+110 ° spindle tunring speed 8.000 U/min number of tool places 16 Pos. table surface area 630 x 500 mm spindle drive 13 kW Number of working hours ca. 30.900 h spindle hours ca. 300 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. The spindle has been overhauled - approximately 300 spindle hours Accessories, tools, and clamping devices shown are only included in the Pgodpfxjxp R D Aj Agwsu scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 107.32.99.077, travel distance X-axis: 530 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 22 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 22 m/min, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Pgedpfxexrc Sqj Agweu Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 406 mm, workpiece weight (max.): 200 kg, table width: 500 mm, spindle speed (min.): 10,000 rpm, Equipment: chip conveyor, For sale: HAAS UMC-500 5-Axis Universal Machining Center Condition: Absolutely brand new machine. Only one part was produced for test machining. The equipment has been unused and stored for 2 years. Main technical specifications Travel: X-axis: 610 mm Y-axis: 406 mm Z-axis: 406 mm Table: Diameter: 500 mm Maximum workpiece weight: 200 kg 5-axis rotary/trunnion table (trunnion type) Spindle: Inline direct-drive 10,000 rpm 30 HP (22.4 kW) CAT 40 taper (40T) Pgsdpfx Agsxg Nd Nowsu Through-spindle coolant: 300 psi (21 bar) Tool changer: 30 tool positions Side-mount, high speed Precision and compensation: Temperature compensation DWO/TCPC – Dynamic Work Offset and Tool Center Point Control Rigid Tapping Equipment and features: Haas NGC CNC control (FANUC compatible) 1 GB memory Ethernet connection, WiFi connectivity USB port, color 15” LCD display Early power-failure detection module Memory lock (keyswitch) Spindle coolant system Protective enclosure with doors Internal lighting Centralized lubrication system Top cover Measurement and calibration equipment: Renishaw WIPS wireless intuitive probing system (Haas Visual Programming System, macros, spindle orientation, coordinate rotation and scaling) Rotary-Axis calibration tool RJH remote jog handle with color display Chip and coolant systems: Coolant tank – 95 gallons (360 L) Initial fill with Blaser coolant emulsion Chip conveyor (belt type – CONVEYOR-H) High-pressure air system Documentation: Original machine documentation (in English) Application Haas UMC-500 is a compact yet powerful universal 5-axis machining center designed for the production of complex, multi-sided, and free-form surface parts. Suitable for simultaneous 5-axis machining as well as 3+2 machining, significantly reducing setup operations and ensuring high accuracy. If you have further questions, we are happy to assist.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 6,173 h, functionality: limited functionality, machine/vehicle number: 822003, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 600 mm, feed length Y-axis: 410 mm, feed length Z-axis: 520 mm, nominal power (apparent): 15 kVA, controller manufacturer: Heidenhain, controller model: TNC 426PB, total height: 2,535 mm, total length: 2,020 mm, total width: 2,000 mm, table width: 840 mm, table length: 420 mm, table load: 500 kg, overall weight: 2,500 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 6,000 rpm, spindle motor power: 8,500 W, number of spindles: 1, number of slots in tool magazine: 22, tool length: 250 mm, tool diameter: 130 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, The milling machine is still running, while I'm writing this description, which proves it’s in good condition. We purchased the machine used, and it has had one defect from the beginning — when entering drilling cycles from the operator panel, the machine freezes and needs to be restarted. However, if a program containing drilling cycles is uploaded to the machine via the RS232 port, those cycles run correctly. Apart from that, all other components of the mill operate flawlessly. We’re also including a table-mounted rotary table (fourth axis) Magerl Rotamatik 120. The machine is for sale, because Heidenhain operators are hard to find in our area, and we want to buy something with HAAS controls instead. Podpfjxrca Usx Agwegu

Condition: ready for operation (used), Year of construction: 2016, - USED - 3-AXIS TRAVELLING COLUMN VERTICAL MACHINING CENTRE X-AXIS TRAVEL: 2050 mm Y-AXIS TRAVEL: 550 mm Z-AXIS TRAVEL: 560 mm DISTANCE SPINDLE NOSE-TABLE: 180-740 mm DISTANCE COLUMN-SPINDLE AXIS: 638 mm RAPID FEEDS X-Y-Z: 30 m/min SPINDLE: BT-40 ; 15-18,5 kW; 12000 rpm Pjdoxn U Rdspfx Agwsgu TABLE SIZE: 550 x 2500 mm MAX ADMITTED LOAD: 1200 Kg HIGH PRESSURE COOLANT: 20 Bar TOOL MAGAZINE: 40 POS; CHAIN-TYPE MAX TOOL DIAMETER: 80 mm MAX TOOL LENGHT: 350 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 0i-MF WEIGHT: 9050 Kg OVERALL DIMENSIONS: 5300 x 3430 x 3045 mm ACCESSORIES: SWARF CONVEYOR ; ETHERNET PORT ; USB PORT ; PORTABLE HANDWHEEL NOTE: SEPARATORE TAVOLA PER LAVORAZIONI IN PENDOLARE

Condition: used, Year of construction: 2013, Technical details: x-travel: 760 mm y-travel: 460 mm z-travel: 460 mm control: Heidenhain TNC 620 Pgodpfsvhbpdex Agwsu switched on hours: 20246 h spindle hours: 7724 h number of spindle speeds: 12.000 U/min. max. torque on the spindle: 75 - 95 Nm spindle taper MT: SK40 tool changer with: 24 Plätze table-size: 900 x 410 mm max. table load: 350 kg feed range: k.A. rapid traverse:: 36 m/min interface: RS232 control voltage: 24 DC V air-pressure connection: 6 / 8 bar total power requirement: 20 kVA Weight approx.: ca. 6,0 t dimension coolant device: 1,7 x 0,7 x 1,35 m dimension machine xH: 1,9 x 2,3 x 2,45 m TNC620 (contouring control with up to 5 controlled axes, particularly suitable for universal milling), can be integrated into the network Safety doors with impact-resistant plastic window panes Chip conveyor Hydraulic unit Coolant preparation system Rittal cooling system on the control cabinet Work area Interior lighting *

Condition: ready for operation (used), Year of construction: 2001, Main Drive Number of axis 3 Table Table load 500 kg Media Podpfx Ajxpyvbsgwjgu Chip conveyor Yes Additional Equipment Thru Spindle Coolant Chip Conveyor This 3-axis DECKEL MAHO DMC 63V was manufactured in 2001. It features a working table of 800 x 500 mm, a tool magazine with 25 slots, and a main spindle speed of 8000 rpm. The machine can handle a maximum working load of 500 kg. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 63V machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT Podeq Nqkxepfx Agwegu PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: used, Year of construction: 2007, Technical details: x-travel: 1200 mm y-travel: 600 mm z-travel: 800 mm distance spindle /table: 125 / 925 mm control: Heidenhain iTNC 530 number of spindle speeds: 9000 steples U/min. max. torque on the spindle: max.82 Nm switched on hours: 43363 h spindle hours: 16319 h tool changer with: 24 Plätze table-size: 1250 x 630 (Kreuzschiebetisch) mm max. table load: 1000 kg spindle taper MT: SK40 spindle drive: 13 kW feed range: X/Y/Z: 40/40/30 m/min rapid traverse:: X/Y/Z: 40/40/30 m/min feed power: X/Y/Z: 7/7/16 kN interface: ja total power requirement: 13 kW Weight approx.: 8,0 t Pgedpfxovithzj Agwsu dimension coolant device: ca. L:1,25 x B: 0,7 x H: 1,56 m dimension machine xH: 2,4 x 3,0 x 3,3 m Main spindle: Spindle head DIN 69871, SK 40/DIN 69 871-A40 and pull stud DIN 69872 Drive technology via ball screw drive Equipment: Compact filter/coolant high-pressure system Knoll Chip conveyor/scraper belt conveyor 300mm Tool changing unit with disk magazine for 24 tools Electronic handwheel Operation via Heidenhain control panel Accessories: AL plate 1200x600x45mm with holes Ø 15mm *

Condition: ready for operation (used), Year of construction: 2014, General Data Machine weight 5670 Main Drive Spindle speed range 8100 Spindle motor power 22.4 kW Movement X-Axis Rapid Traverse 24.5 m/min Y-Axis Rapid Traverse 24.5 m/min Z-Axis Rapid Traverse 24.5 m/min Table Outer length 1219 Outer width 457 Tslots size 16 MM Number of tslots 15 Distance between 80 MM Min distance between vertical spindle and table 102 Max distance between vertical spindle and table 737 Table load 1588 KG Tools Slots in storage 15 Max weight 5.4 Max tool diameter 189 This 3-axis milling machine was manufactured in 2014. Equipped with a powerful 22.4 kW spindle and precise positioning accuracy of 0.005 mm, this HAAS VF-3 offers exceptional performance for machining tasks. Its 20-tool horizontal carousel magazine ensures efficient tool changes, while the 15" LCD color monitor enhances user interface. With a maximum table load of 1588 kg and rapid traverse rates of 25.4 m/min, buy this HAAS VF-3 milling machine for versatile and reliable production capabilities. Contact us for further information. Pgedpfoxpyxpox Agwju Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, - USED - TWIN-SPINDLE HEAD 3-AXIS VERTICAL MACHINING CENTRE WITH ROTOPALLET X-AXIS TRAVEL: 520 mm Y-AXIS TRAVEL: 360 mm Z-AXIS TRAVEL: 360 mm DISTANCE SPINDLE NOSE-TABLE: 200-560 mm RAPID FEEDS X-Y-Z: 60 m/min SPINDLE: 36 - 10500 rpm; 30 - 35 kW; HSK A63 PALLET: N.2 MAX ADMITTED LOAD: 450 Kg TOOL MAGAZINE: 21X2 POS MAX TOOL DIAMETER: 88 (125) mm MAX TOOL LENGHT: 250 mm CONTROL UNIT: FANUC 31i A5 WEIGHT: 5300 Kg OVERALL DIMENSIONS: 3200 x 3250 x 3245 mm Pgjdpfx Agei Hmm Sjwju ACCESSORIES: SWARF CONVEYOR ; HIGH PRESSURE COOLANT PUMP ; PAPER FILTER ; TOOL SETTER NOTE: WITH No 1 4th AXIS TABLE

Condition: used, Year of construction: 1987, Technical details: x-travel: 760 mm y-travel: 450 mm z-travel: 500 mm control: Mazatrol CAM M-2 tool changer with: 30 tools (Kettenmagazin) Plätze spindle taper MT: ISO 40 Revolution per minute: 28 - 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 2.000 mm/min Pjdjvc Avbjpfx Agwegu max. torque on the spindle: ca. 23 Nm rapid traverse:: X / Y: 24 m/min rapid traverse:: Z: 15 m/min. bore capacity in steel (diameter): Ø 40 mm table-size: 500 x 1150 mm table load capacity - central/maximum: 700 kp total power requirement: 11 kW (24,4 kVA) kW Weight approx.: 6,8 t dimension machine xH: 3,7 x 2,5 x 2,6 m chip conveyor: L: 3,7 x B: 0,75 x H: 1,35 m ATC tool magazine for 30 tools up to Ø 100mm x 330mm, SK40 Hinged belt chip conveyor Knoll-120S-1 with ejection height of 1130mm Coolant tank with pump, 200liter capacity, 30 l/min. Operation via control panel with boom 2000mm. accessories: cooling lubricant pump Base plates *

Condition: ready for operation (used), Year of construction: 2018, Main Drive Spindle speed range 15000 Pgjdpfjxpyqfsx Agwou Number of axis 3 This 3-axis Hyundai WIA KF 5600 vertical machining center was manufactured in 2018. It features a 30-position automatic tool changer, a high-speed spindle at 15,000 rpm with BBT40 taper, and advanced Siemens software options including 3D simulation and real-time machining recording. Ideal for precision machining with its equipped glass rods for accurate measurements. Consider the opportunity to buy this Hyundai WIA KF 5600 vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,117 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 1300 mm Y-AXIS TRAVEL: 670 mm Z-AXIS TRAVEL: 625 mm DISTANCE SPINDLE NOSE-TABLE: 150-775 mm RAPID FEEDS X-Y-Z: 36 - 36 - 30 m/min SPINDLE: 12000 rpm; 11-18,5 kW; 117,8 Nm; ISO 40 - DIN TABLE SIZE: 1500 x 670 mm MAX ADMITTED LOAD: 1300 Kg TOOL MAGAZINE: BASKET-TYPE ; 30 POS MAX TOOL DIAMETER: 76 (125) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg Pedpfx Agow Dkflowogu CONTROL UNIT: FANUC i Series Plus WEIGHT: 8500 Kg OVERALL DIMENSIONS: 2600 x 3350 x 3120 mm ACCESSORIES: SWARF CONVEYOR ; HIGH PRESSURE COOLANT ; PCMCIA SERIAL PORT ; USB PORT ; PORTABLE HANDWHEEL NOTE: 4TH-AXIS PRE-SET

Condition: used, Year of construction: 1996, Technical details: x-travel: 762 mm y-travel: 510 mm z-travel: 560 mm control: Heidenhain TNC 415 OR 360 tool changer with: 21 place table clamping surface:: 865 x 510 mm table load: 455 kg tool taper: SK40 spindle revolutions per minute : 60 - 8000 U/min feed:: X/Y/Z; 15 000 mm/min rapid traverse : X/Y/Z: 24 m/min Pgodpou Idmvofx Agwou compressed air: Bedarf: 5,5 bar Total power requirement: 30 kVA motor capacity: Spindelmotor: 11,0 kW max. torque on the spindle: konstant: von 60 - 750 KN Weight approx.: 4,3 t dimension machine xH: 2,6 x 2,8 x 2,6 m dimension coolant device: L: 2,7 x B: 0,8 x H: 0,8 m Machining center with automatic tool changer IKZ and coolant supply through nozzles Chip and coolant tray Lubrication system through ball screws Manual control unit Heidenhain TNC 415 - dialog or according to ISO (machining cycles: deep hole drilling; tapping; slot milling; rectangular pocket and circular pocket milling; SL cycles), up to 100 programs in file management Machine can be visited with pleasure under power. i.D. *

Condition: ready for operation (used), Year of construction: 2019, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 1360 mm Y-AXIS TRAVEL: 700 mm Z-AXIS TRAVEL: 700 mm DISTANCE SPINDLE NOSE-TABLE: 100-800 mm DISTANCE COLUMN-SPINDLE AXIS: 792 mm RAPID FEEDS X-Y-Z: 32 m/min SPINDLE: 12000 rpm; 11-16.5-20-28 kW; BBT-40 TABLE SIZE: 1400 x 700 mm MAX ADMITTED LOAD: 1000 Kg HIGH PRESSURE COOLANT: 20 Bar TOOL MAGAZINE: CHAIN-TYPE ; 30 POS MAX TOOL DIAMETER: 75 (150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 7 Kg Pgodpfx Ajnzn I Ejgwou CONTROL UNIT: HEIDENHAIN TNC 620 WEIGHT: 9000 Kg OVERALL DIMENSIONS: 4670 x 2985 x 3105 mm ACCESSORIES: SWARF CONVEYOR ; ETHERNET PORT ; USB PORT ; PORTABLE HANDWHEEL

Condition: used, Year of construction: 2002, Technical details: x-travel: 1060 mm y-travel: 610 mm z-travel: 610 mm control: Ultimax 4 spindle speed:: 10 - 10.000 U/min tool taper: SK40 tool changer with: Trommelmagazin mit 24 Plätze places feed speed: XYZ: 3 - 7.000 mm/min rapid traverse:: XY: 30 m/min rapid traverse: Z: 20 m/min table-size: 1220 x 510 mm table load: 1,1 t air-pressure connection: für 6 bar bar Total power requirement: 30 kVA Weight approx.: 6,28 (ohne Anbauteile) t dimension machine xH: 2,82 x 3,2 x 2,7 m dimension swarf conveyor LxWxH: 3,0 x 0,65 x 1,5 Pjdpfou Iddnox Agwjgu The machine is currently in the technical department. delimited working area by chip splash guard cabin incl. cooling device with feeding (30bar internal coolant system) (size 1200x500x150mm) capacity for 340Liter spindle with internal coolant system Scraper belt chip conveyor control panel with two screens Attention! Tool gripper arm for tool change is missing on the machine! Is on sale with this limitation! i.D. *

Condition: ready for operation (used), Year of construction: 2018, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 1100 mm Y-AXIS TRAVEL: 560 mm Z-AXIS TRAVEL: 510 mm DISTANCE SPINDLE NOSE-TABLE: 120-630 mm RAPID FEEDS X-Y-Z: 30 m/min SPINDLE: 20 - 12000 rpm; 9 - 13 kW; ISO 40 - DIN TABLE SIZE: 1400 x 560 mm MAX ADMITTED LOAD: 1000 Kg HIGH PRESSURE COOLANT: 12 Bar TOOL MAGAZINE: CHAIN-TYPE ; 30 POS CONTROL UNIT: HEIDENHAIN TNC 620 WEIGHT: 5830 Kg OVERALL DIMENSIONS: 4028 x 2750 x 2950 mm Pgsdpfswh Dg Rox Agwju ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL NOTE: WITH No 30 TOOLS-HOLDERS ISO 40