Used Vertical Machining for sale (64,206)

Condition: ready for operation (used), Year of construction: 2018, Movement X-Axis Movement 1500 mm Ledpfxox D Sg Uj Affjhr Y-Axis Movement 660 mm Z-Axis Movement 660 mm This 3-axis Okuma MB-66VB was manufactured in 2018 and features a robust vertical machining center design. It offers a large working area of 660 × 1530 mm, with X, Y, and Z travels of 1500 mm, 660 mm, and 660 mm respectively. The machine supports a load capacity of 1500 kg and achieves rapid traverse feed rates up to 40 m/min. Consider the opportunity to buy this Okuma MB-66VB vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 2134 x 1016 x 762mm, Ledox D Ulmepfx Affshr Table 2134 x 914mm, table load 1814 kgs, Spindle Speed 7500 rpm, Spindle taper BT40, Spindle Motor 30Hp, HAAS Control, 24 Station ATC, coolant, low volt light, swarf auger,

Condition: ready for operation (used), Year of construction: 2016, operating hours: 27,000 h, General Data Measurements width 6360 Measurements depth 9960 mm Measurements height 4724 mm Machine weight 35000 kg Control Unit Brand HURCO Model WinMax 5 Main Drive Lhsdpfx Afsx D R H Hofjr Spindle speed range 18000 Spindle motor power 35 kW Main motor power 187 KVA Movement X-Axis Movement 3200 mm X-Axis Rapid Traverse 15 m/min Y-Axis Movement 2100 mm Y-Axis Rapid Traverse 15 m/min Z-Axis Movement 920 mm Z-Axis Rapid Traverse 10 m/min Table Outer length 3000 mm Outer width 1700 mm Min distance between vertical spindle and table 164 mm Max distance between vertical spindle and table 1084 mm Table load 11000 kg Tools Slots in storage 40 Max weight 15 kg Max tool diameter 125 mm Max tool length 300 mm Additional Equipment Oversized linear guides and ultra-rigid roller linear guides Ball screws with double nut and automatic centralized lubrication system Screw chip conveyor and chip conveyor with scrapers Machine interior washing system with emulsion gun/compressed air Ring with emulsion nozzles in the shaft head Large side doors for access LED-illuminated workspace Heat exchanger in the electrical cabinet Premium remote control equipped with LCD display IKZ-20 Spindle cooling CTS20 (20 bar) This 3-axis Hurco DCX32-5Si vertical machining centre was manufactured in 2016. It features a large work surface of 3,000x1,700 mm, supports a maximum table load of 11,000 kg, and offers extensive travel distances with X at 3,200 mm, Y at 2,100 mm, and Z at 920 mm. Equipped with a high-speed main spindle capable of 18,000 rpm and a robust 40-position tool magazine, this machine is ideal for complex, large-scale machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2021, General Data Measurements width 1700 mm Measurements height 2240 mm Machine weight 3500 kg Lhedpfx Afex D Nu Nefer Measurements depth 2100 mm Control Unit Brand SIEMENS Model SINUMERIK 828D Main Drive Spindle speed range 80 – 10000 rpm Tool taper SK 40 Movement X-Axis Movement 600 mm X-Axis Feed Force 10000 mm/min X-Axis Rapid Traverse 24000 mm/min Y-Axis Movement 400 mm Y-Axis Feed Force 10000 mm/min Y-Axis Rapid Traverse 24000 mm/min Z-Axis Movement 450 mm Z-Axis Feed Force 10000 mm/min Z-Axis Rapid Traverse 20000 mm/min Additional Equipment Rigid cast-iron frame construction Linear guides on all three axes Automatic double-arm tool changer (16 stations) Complete coolant system Central automatic lubrication Air blast system for spindle cleaning Machine enclosure with doors Machine and signal lights Documentation in English CE-certified This 3-axis WAGNER WMC 600 L was manufactured in 2021, featuring a robust cast-iron frame and linear guides on all axes. It includes a Siemens 828 Basic ShopMill, an automatic double-arm tool changer with 16 stations, and a complete coolant system. The spindle supports speeds up to 10,000 rpm with a power of 11 kW. If you are looking to get high-quality milling capabilities consider the WAGNER WMC 600 L machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2012, Control Unit Brand MITSUBISHI Model M720 SSS Main Drive Spindle speed range 15000 Tool taper ISO40 Number of axis 5 Movement X-Axis Movement 1140 mm Y-Axis Movement 610 mm Z-Axis Movement 810 mm Table Table load 850 kg Additional Equipment Air blast through spindle Rotary table with counter-support and hydraulic lock – 360° rotation Heidenhain linear scales on X, Y, Z axes; rotary encoders on A and C axes Coolant through spindle, 20 bar + low-pressure cooling system Renishaw OMP60 workpiece probe + receiver // Renishaw TS27R tool probe Ljdjx D Nrzepfx Affehr Chip flushing system Chain-type chip conveyor Telescopic covers for X, Y, Z axes Full machine enclosure with safety door lock Central lubrication system with oil cooler This 5-axis Pinnacle BX300A was manufactured in 2012. It features a spindle speed of 15,000 rpm, a table size of 1300 × 610 mm, and a 24-position tool magazine. Equipped with a Mitsubishi M720VS control system, it supports complex machining with continuous rotation on the C-axis and tilting on the B-axis. Consider the opportunity to buy this Pinnacle BX300A vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, operating hours: 238 h, General Data Machine weight 7212 kg Control Unit Brand HAAS Main Drive Spindle speed range 7500 Number of axis 3 Ljdpfx Afjx D Itqofohr Movement X-Axis Movement 1016 mm Y-Axis Movement 660 mm Z-Axis Movement 635 mm Table Outer length 1372 mm Outer width 610 mm Tools Slots in storage 30+1 This HAAS VF-3YT/50 Vertical Machining centre was manufactured in the year 2017 in the United States and has 238 production hours. It is equipped with a HAAS control unit and has 3 axis. The machine has a spindle speed of 12000 rpm. Application Types Milling

Condition: ready for operation (used), Year of construction: 2013, Control Unit Brand FANUC Main Drive Number of axis 4 Spindle Speed 10000 RPM Movement X-Axis Movement 700 mm Z-Axis Movement 330 mm Y-Axis Movement 400 mm This 4-axis FANUC Robodrill Alfa-D21LiA5 was manufactured in 2013. It features a travel range of X: 700 mm, Y: 400 mm, Z: 330 mm, and a spindle speed of 10000 rpm. The tool magazine holds 21 tools with rapid feeds up to 54000 mm/min in X and Y, and 48000 mm/min in Z. Consider the opportunity to buy this FANUC Robodrill Alfa-D21LiA5 vertical machining centre. Contact us for more information. Lsdpfx Asx D Dpzjffohr Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 7000 kg Control Unit Brand FANUC Model 0i-MD Movement X-Axis Movement 1020 mm Z-Axis Movement 550 mm Y-Axis Movement 610 mm Main Drive Spindle Speed 8000 RPM Spindle motor power 15 kW Tool taper ISO 40 Number of axis 4 Table Table load 600 kg Table Width 1200 mm Table Length 600 mm Tools Slots in storage 24 Max weight 7 kg Lhodpfox D Hdbox Affjr Media Internal cooling yes This Dugard 1000Y Plus was manufactured in 2011. It features a table size of 1200 × 600 mm, a maximum table load of 600 kg, and a tool magazine capacity of 24 tools. The machine includes a fourth rotary axis and is equipped with a FANUC 0i-MD control. If you are looking to get high quality milling capabilities consider the Dugard 1000Y Plus machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 1998, General Data Measurements width 1920 mm Measurements depth 3143 mm Measurements height 3000 mm Machine weight 5500 kg Lhedox D Hmiepfx Affer Control Unit Brand SIEMENS Model SINUMERIK 810M Main Drive Spindle speed range 10500 Tool taper SK40 Number of axis 3 Movement X-Axis Movement 750 mm Y-Axis Movement 400 mm Z-Axis Movement 600 mm Media Power consumption 29 kVA This CHIRON FZ 18 W MAGNUM HIGH SPEED, manufactured in 1998, is equipped with a Siemens Sinumerik 810M CNC controller, a 1240 × 850 mm worktable, and travels of 750/ 400/600 mm in the X, Y, and Z axes. The machine is still connected and in very good technical condition. If you are looking for high-quality milling capabilities, consider the CHIRON FZ 18 W MAGNUM HIGH SPEED we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, Control Unit Brand FANUC Model 0i-MD Main Drive Spindle speed range 10000 Number of axis 3 Movement X-Axis Movement 1300 mm Y-Axis Movement 610 mm Z-Axis Movement 560 mm Table Table load 1500 kg This 3-axis Feeler FVP1300A was manufactured in 2017. It features a large 1420 × 600 mm table, capable of handling loads up to 1500 kg. The spindle reaches speeds up to 10,000 rpm, powered by a robust 15 kW motor, with a peak of 18.5 kW. The tool magazine holds 24 tools. If you are looking to get high quality milling capabilities consider the Feeler FVP1300A machine we have for sale. Contact us for more information. Application Types Lhjdpfxsx D Rchj Affer Milling

Condition: ready for operation (used), Year of construction: 2010, Control Unit Brand HEIDENHAIN Model TNC 530 Lhjdpfjx D Hckex Affer Main Drive Number of axis 3 Spindle Speed 10000 RPM Tool taper ISO 40 Movement X-Axis Movement 1016 mm Z-Axis Movement 710 mm Y-Axis Movement 610 mm Table Table load 700 kg This 3-axis MAS MCV 1016 QUICK was manufactured in 2010. It features a table size of 1300 × 600 mm, with a maximum travel of 1016 mm in the X-axis, 610 mm in the Y-axis, and 710 mm in the Z-axis. The spindle supports a speed range of 20–10000 rpm with stepless speed change. It can handle a maximum table load of 700 kg. If you are looking to get high-quality milling capabilities consider the MAS MCV 1016 QUICK machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2013, General Data Machine weight 17000 kg Ljdpfx Afex D E Dajfshr Control Unit Brand HEIDENHAIN Main Drive Spindle speed range 12000 rpm Tool taper SK 40 Movement X-Axis Movement 1800 mm Y-Axis Movement 900 mm Z-Axis Movement 1020 mm Additional Equipment Under-Table Chip Flushing System Integrated Chip Conveyor This 3-axis TBI MVC 1890 was manufactured in 2013. It features a robust cast iron body, cross-slide table design, and slideway guides on all axes for enhanced rigidity and precision. Key specs include a Heidenhain CNC control, SK40 spindle taper, and a maximum spindle speed of 12000 rpm. It also boasts a 24-position automatic tool changer and integrated chip conveyor. Consider the opportunity to buy this TBI MVC 1890 vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, operating hours: 2,619 h, General Data Machine weight 10000 kg Control Unit Brand FANUC Model 21i MB Main Drive Spindle speed range 80 - 12000 Spindle motor power 11/7.5 kW Tool taper NT 40 Number of axis 3 Movement X-Axis Movement 800 mm X-Axis Rapid Traverse 42 m/min Y-Axis Movement 600 mm Y-Axis Rapid Traverse 42 m/min Z-Axis Movement 600 mm Z-Axis Rapid Traverse 42 m/min Table Outer length 2 x 900 mm Outer width 2 x 650 mm Min distance between vertical spindle and table 200 mm Max distance between vertical spindle and table 800 mm Table load 2 x 400 kg Tools Max weight 8 kg Lhodpfox D R Htox Affjr Max tool diameter 90 mm Max tool length 300 mm This 3-axis Hyundai Kia Hi-V600D vertical machining center was manufactured in 2011. Ideal for precision machining tasks, it offers robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the Hyundai Kia Hi-V600D machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2006, Main Drive Number of axis 3 Movement Y-Axis Movement 250–300 mm Z-Axis Movement 250–300 mm This 3-axis SCHÜCO PBA 3250 was manufactured in 2006. It features a working length of approximately 3250 mm and is capable of processing aluminum and steel profiles. Equipped with a CNC controller and Schüco software, this machine is fully functional and has been regularly maintained. If you are looking to get high-quality milling capabilities, consider the SCHÜCO PBA 3250 machine we have for sale. Contact us for more information. Lodpfxox D E Tuj Affehr Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, operating hours: 4,757 h, General Data Measurements width 2794 mm Measurements depth 2235 mm Measurements height 2692 mm Machine weight 5670 kg Control Unit Brand HAAS Main Drive Spindle speed range 12000 Number of axis 4 Movement X-Axis Movement 1016 mm Y-Axis Movement 508 mm Z-Axis Movement 635 mm Workpiece Workpiece weight 794 kg Tools Max weight 5.4 kg Max tool diameter 76 mm Max tool length 330 mm Ljdox D Iy Dspfx Affehr This 4-axis HAAS VF-3SS vertical machining center was manufactured in 2017. It features a 1016 mm X-axis travel, 508 mm Y-axis travel, and 635 mm Z-axis travel. The table supports up to 794 kg, with dimensions of 1219 mm by 457 mm. It includes 24 tool pockets and achieves a maximum spindle speed of 12,000 RPM. Consider the opportunity to buy this HAAS VF-3SS vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,316 h, General Data Measurements width 2665 mm Measurements depth 3065 mm Measurements height 2840 mm Machine weight 5600 kg Control Unit Brand SIEMENS Model Sinumerik 828D Main Drive Spindle speed range 20 – 12000 Number of axis 3 Movement X-Axis Movement 550 mm Y-Axis Movement 550 mm Z-Axis Movement 510 mm Table Table load 600 kg Tools Max weight 8 kg Max tool diameter 80 mm Lhjdpfx Aox D Nigjffer Max tool length 300 mm Type of tool holder SK40 Media Power consumption 20 kVA Additional Equipment Job Shop package Renishaw PP40 wireless workpiece probe TS27R tool measurement probe Scraper-type chip conveyor Coolant tank capacity: 200 L (left side) Coolant pump: 20 bar internal through-spindle coolant Machine enclosure roof LED work area lighting This 3-axis DMG MORI M1 PRO was manufactured in 2022. It features a robust inline spindle with a speed range of 20-12000 rpm and a 24-position automatic tool changer. The worktable supports up to 600 kg with dimensions of 850 × 650 mm. Additional highlights include a Renishaw PP40 probe, 20 bar coolant system, and LED lighting. Ideal for precision machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2003, Control Unit Brand FANUC Ljdpfx Aox D Dygjffohr Model Series 18i-MB General Data Machine weight 4500 kg Measurements height 2700 mm Dimensions Machine Length 3300 mm Table Table load 500 kg Table Width 1200 mm Table Length 600 mm Main Drive Number of axis 3 Spindle Speed 10000 RPM Spindle motor power 9 kW Tool taper SK 40 Tools Max weight 8 kg Movement X-Axis Movement 1000 mm Z-Axis Movement 500 mm Y-Axis Movement 600 mm This 3-axis DECKEL MAHO DMC 103V was manufactured in 2003. It features a FANUC Series 18i-MB CNC control, with axis travels of 1000 mm in X, 600mm in Y, and 500 mm in Z. The spindle supports SK40 tooling, operates at 10,000 rpm, and the table can handle loads up to 500 kg. Consider the opportunity to buy this DECKEL MAHO DMC 103V vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,300 h, Control Unit Brand HAAS Model NGC Main Drive Number of axis 3 Spindle Speed 8100 RPM Lhsdpfx Asx D Hpdoffer Tool taper ISO 40 Movement X-Axis Movement 1016 mm Z-Axis Movement 635 mm Y-Axis Movement 508 mm Table Table load 1588 kg Tools Max tool diameter 89 mm Slots in storage 20 Media Internal cooling yes This HAAS VF-3 vertical machining center, manufactured in 2017, offers strong milling performance with a large 1219 × 457 mm table and a load capacity of 1588 kg. It is equipped with an 8100 rpm spindle and includes a chip conveyor as well as a through-spindle coolant 21 bar option. The machine is in excellent technical condition. If you are looking for high-quality milling capabilities, consider the HAAS VF-3 we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, operating hours: 5,557 h, Control Unit Brand HAAS Main Drive Spindle speed range 8100 Number of axis 3 Movement X-Axis Movement 706 mm Y-Axis Movement 406 mm Z-Axis Movement 508 mm Lhedpfx Aex D Hpksffer Workpiece Workpiece weight 1361 kg This HAAS VF-2, manufactured in 2008, offers strong machining capability with 706 mm of X-axis travel, 406 mm on the Y-axis, and 508 mm on the Z-axis. Equipped with a spindle speed of 8100 rpm and a powerful 22.4 kW spindle motor, it is well suited for demanding milling applications. The visual and technical condition of the machine is very good for its age. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, operating hours: 3,420 h, Control Unit Brand MAZATROL Model MATRIX NEXUS General Data Machine weight 7100 kg Main Drive Number of axis 4 Movement X-Axis Movement 1050 mm Y-Axis Movement 510 mm Z-Axis Movement 510 mm Ledpfxsx D Eguj Affshr Table Table load 1200 kg Tools Number of index 30 This 4-axis Mazak NEXUS VCN 510C-II was manufactured in 2007. It features a Mazatrol Matrix NEXUS CNC control, X-axis travel of 1050 mm, Y-axis travel of 510 mm, Z-axis travel of 510 mm, and a 4th axis KITAGAWA rotary table. The machine has a table size of 1300 × 550 mm and can handle a maximum load of 1200 kg. Consider the opportunity to buy this Mazak NEXUS VCN 510C-II vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2018, General Data Measurements width 2800 mm Measurements depth 2020 mm Measurements height 2450 mm Machine weight 8200 kg Control Unit Model TNC 640 Brand HEIDENHAIN Main Drive Number of spindles 1 Spindle speed range 1-42000 rpm Spindle motor power 15 kW Tool taper HSK E40 Number of axis 5 Movement X-Axis Movement 550 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm B-Axis Movement -120°/+60° C-Axis Movement 40 rpm Table Outer length 650 mm Outer width 500 mm Tslots size 5 x 14H12 Number of tslots 100 Table load 500 kg Additional Equipment Lhsdpfx Afox D D Dxsfer Tool Magazine Capacity: 100 positions This 5-axis INGERSOLL High Speed Eagle V5 was manufactured in 2018. It features a Heidenhain TNC 530 control, a 15 kW spindle, and 100 tool slots. With travel dimensions of X: 550mm, Y: 850mm, and Z: 450mm, this vertical machining centre represents a robust opportunity for precision machining. Only machine is included. Yaskawa robot and other parts of the automation shown in the video not scope of supply. Contact us for further details regarding this vertical machining centre. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand SIEMENS Model Sinumerik Movement X-Axis Movement 1400 mm Z-Axis Movement 600 mm Y-Axis Movement 700 mm This 4-axis WAGNER VMC 1400 was manufactured in 2007. It features a spindle power of 28 kW, maximum spindle torque of 230 Nm, and a spindle speed up to 4000 rpm. It includes a 4th axis for machining workpieces up to 1100 mm. Ideal for complex machining tasks. Contact us for more information about this machine. Lsdpex D Elwsfx Affohr Application Types Milling

Condition: ready for operation (used), Year of construction: 2012, Control Unit Model Series 0iMD Brand FANUC Main Drive Spindle speed range 1000 rpm Number of axis 4 Movement X-Axis Movement 1600 mm Y-Axis Movement 800 mm Ljdpsx D S Dtjfx Affehr Z-Axis Movement 800 mm Table Outer length 1700 mm Outer width 800 mm Table load 2000 kg Additional Equipment Options included: 4th axis This 4-axis AWEA AF-1600 vertical machining centre was manufactured in 2012. It features a large table size of 1700 mm x 800 mm with a load capacity of 2000 kg, and a spindle speed of 1000 rpm. Equipped with a Fanuc Series 0iMD control and a 16-position tool magazine, the AWEA AF-1600 machine we have for sale is ideal for complex machining tasks. Contact us for further details regarding this vertical machining centre. Application Types Milling

Condition: ready for operation (used), Year of construction: 2014, General Data Machine weight 5670 Main Drive Spindle speed range 8100 Spindle motor power 22.4 kW Movement X-Axis Rapid Traverse 24.5 m/min Y-Axis Rapid Traverse 24.5 m/min Z-Axis Rapid Traverse 24.5 m/min Table Outer length 1219 Outer width 457 Tslots size 16 MM Number of tslots 15 Distance between 80 MM Min distance between vertical spindle and table 102 Max distance between vertical spindle and table 737 Table load 1588 KG Lsdpfsx D N I Nex Affshr Tools Slots in storage 15 Max weight 5.4 Max tool diameter 189 This 3-axis milling machine was manufactured in 2014. Equipped with a powerful 22.4 kW spindle and precise positioning accuracy of 0.005 mm, this HAAS VF-3 offers exceptional performance for machining tasks. Its 20-tool horizontal carousel magazine ensures efficient tool changes, while the 15" LCD color monitor enhances user interface. With a maximum table load of 1588 kg and rapid traverse rates of 25.4 m/min, buy this HAAS VF-3 milling machine for versatile and reliable production capabilities. Contact us for further information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2021, Control Unit Brand HEIDENHAIN Ledpfx Afex D Dzdefohr Model TNC 620 Table Table load 1500 kg Main Drive Number of axis 4 Spindle Speed 15000 RPM Tool taper SK 40 Movement X-Axis Movement 1200 mm Z-Axis Movement 500 mm Y-Axis Movement 610 mm Tools Slots in storage 32 This 4-axis EMCO Emcomill EM 1200 was manufactured in 2021. It features a TNC 620 HEIDENHAIN control, a 15,000 rpm spindle, and a SK40 tool carrier. The machine offers X-1200, Y-610, Z-500 strokes and supports a maximum workpiece weight of 1500Kg. With 32 tools and 3300 operating hours, consider the opportunity to buy this EMCO Emcomill EM 1200 vertical machining centre. Contact us for more information. Application Types Milling