Used Vertical Cnc Lathe for sale (16,975)

Condition: used, MAKE – TUSCAN MODEL – TL29 YEAR – 2002 CONTROL – FANUC OT TURRET – 8 POSITION WITH LOADS OF HOLDERS SWING OVER BED – 740 mm Bjdpowmlcdsfx Aafolc SWING OVER CROSS SLIDE – 420 mm CENTRE DISTANCE – 4000 mm SPINDLE BORE – 250 mm TRAVERSES – X-AXIS 500 mm/Z-AXIS 3700 mm SPEED – 15-700 RPM MOTOR – 3 SPEED GEARBOX MOTOR 30KW SWARF CONVEYOR 4 JAW CHUCK SWARF CONVEYOR

Condition: excellent (used), New 2008 Swing over bed - 600 (Ø 23.62) Diameter × length - Ø 300 × 600 (Ø 11.81 × 23.62) Max. diameter - Ø 380 (Ø 14.96) Max. travel range of Z/X axis - 600 / 240 (23.62 / 9.44); Z-axis: FANUC 2.8 kW (4 HP) /3000 rpm; Bedpfxsrfx Tno Aafelc X-axis: FANUC 2.8 kW (4 HP) /3000 rpm Diameter of spindle bore/Draw bar bore - STD: Ø 77 / Ø 52 (Ø 3.03 / Ø 2.04); OPT: Ø 86 / Ø 77 (Ø 3.38 / Ø 3.03) Spindle speed - STD: 8” chuck 3500 rpm; OPT: 8” chuck 4500 rpm, 10” chuck 3500 rpm Chuck diameter - STD: Ø 8” ; OPT: Ø 10” Hydraulic Tailstock – travel 465 (18.3) MT. No.4 VDI Tool stations - OPT: 8 STD: 10 Coolant Chip conveyor Power requirement - 208-220 volts / 100 Amps / 3 Phases / 60 Cycles Floor area (L × W × H) - 4080 ×1675 × 1842 (160.62 × 65.94 × 72.51) Gross weight (approx.) - 5200 kg (11440 Ibs)

Condition: good (used), Year of construction: 1999, Ref. -No.: 10443 Manufacturer: VDF BOEHRINGER Type: 16 M - G Year of construction: 1999 Type of control: CNC Control: REXROTH INDRAMAT SYSTEM 200 BTV 30 Storage location: Halberstadt Country of origin: Germany Turning Diameter: 520 mm Turning Diameter Over Slide Rest: 150 mm Spindle Speeds: 25 - 4.500 RPM Spindle Bore: 78 mm Tool Taper: VDI 40 Rapid Traverse: 15.000 mm / min Distance Between Centres: 1110 mm Spindle motor drive: 18 kW Turret places: 12 Pcs Machine length: 5000 mm Machine width: 2800 mm Machine Height: 3200 mm Weight Of The Machine Ca.: 14,5 t Further information: 2x revolver (12 places) Blsdpsycpw Asfx Aafec Machine can be inspected under power by appointment.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10436 Manufacturer: SCHERER FEINBAU Type: VDZ 120 rechts Year of construction: 2010 Type of control: CNC Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany Machine-No.: 660XX Turning Speeds: 5500 RPM Swing Diameter: 260 mm Rapid Travel Speed X-Axis: 60 m / min Bedpeycpwvjfx Aafelc Rapid Travel Speed Z-Axis: 30 m / min Travel -X Axis: 626 mm Travel -Z Axis: 250 mm Spindle bearing diameter: 32 mm Rated speed: 1200 1 / min Turret places: 12 Pcs Machine length: 1685 mm Machine width: 2400 mm Machine Height: 2850 mm Weight Of The Machine Ca.: 8 t Further information: Spindle head with short taper DIN 55026: A6 Pallet conveyor WPS KNOLL system (2010) SAUTER turret (12 places) Documentation available Tools in the pictures are sold with the machine. Machine can be inspected and demonstrated under power.

Condition: ready for operation (used), Year of construction: 2009, Used CNC vertical machining center Bedpfx Aaeycplmjfjlc

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, High-precision lathe DMG Mori Wasino G 100/480 Year of manufacture: 2017 Control: Fanuc COMPACT line Temperature response (at cold start): ø 2.0 μm Roundness: 0.5 μm Technical specifications: Spindle speed: Drive power: Turning diameter: 285 mm Turning length: 280 mm Bar capacity: 38 mm Travel paths: Bodpfx Asvi Ifzoafslc X-axis: 480 mm Z-axis: 285 mm Accessories - 3 live tools - Rigid tool holder package - Fire extinguishing system - Machine has only been run under oil - Chip conveyor

Condition: good (used), turning diameter: 5,000 mm, travel distance Z-axis: 2,000 mm, turning length: 2,500 mm, The machine is in good technical condition, fully functional, modernized in 2008. It is equipped with a Siemens Sinumerik 802 D control system, a maximum turning diameter of 5000 mm and a clamping plate diameter of 2500 mm. The workpiece weight is 40 tons and the height is 2000 mm. Bedpfsv Dkykox Aafslc

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, R0.07.35 morbidelli cx110 1x 52.46.73 F23L RO.AX drilling head 1x 52.41.14 Drilling head with inverter Bledpfoyfw Tqjx Aafoc 1x 52.43.47 Electrospindle HSK63F 7.5 kW 24000 rpm 1x 52.46.75 6-position tool changer 1x 52.38.35 HSK63F head for hinges 48 offset 6 1x 52.46.76 Saw blade/Lamello vertical head 1x 52.46.77 HITECO HSK 63F head – 1 horizontal outlet for routers 1x 52.43.50 Return for workpieces X

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 - Number of turrets : 3 MAIN SPINDLE - Spindle nose : A2-5 - Spindle power : 22/29 [kW] - Spindle speeds : 7.000 [rpm] - Max. bar diameter : 42 [mm] - Max. chuck diameter : 110 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 16,5/19 [kW] - Spindle speeds : 7.000 [rpm] - Max. bar diameter : 42 [mm] * Max. chuck diameter : 110 [mm] - C axis indexing precision : 0,001 [°] - Travel : 500 [mm] - Rapid traverse rate : 60 [m/min] - Spindle / counter-spindle distance : 515 [mm] UPPER LEFT TURRET - Number of positions : 10 - Number of motorized positions : 10 - X/Z stroke : 70 / 250 [mm] - Y stroke : 70 [mm] - Tool type : VDI 25 - Live tools speed : 8.000 [rpm] - Live tools power : 4,2 [kW] UPPER RIGHT TURRET - Number of positions : 10 - Number of motorized positions : 10 - X stroke : 125 [mm] - Tool type : VDI 25 - Live tools speed : 8.000 [rpm] - Live tools power : 4,2 [kW] LOWER LEFT TURRET - Number of positions : 10 - Number of motorized positions : 10 - X/Z stroke : 70 / 400 [mm] - Y stroke : 70 [mm] - Tool type : VDI 25 - Live tools speed : 8.000 [rpm] - Live tools power : 4,2 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 37 [kW] WEIGHT & DIMENSIONS - Machine floor space : 5990 x 1710 [mm] - Machine height : 2140 [mm] - Machine weight : 5.500 [kg] MACHINE HOURS Blodpfxoyfw I Us Aafjc - Number of working hours : 16759 [h] EQUIPMENT - CNC : Fanuc Series 31i-B - 3 colors status lamp - Coolant tank * with high-pressure pump : 25 [bars] * with paper filtering unit - Coolant through spindle - Chips conveyor : DROITE - Cooling unit : KLH - Parts catcher - Parts conveying strip - Bar loader : IEMCA BOSS 552 HD

Year of construction: 2022, condition: used, machine/vehicle number: 710370, max. bar passage: approx. Ø 42 mm, max. bar length: approx. 800 mm, 12-position tool changer, tool holder: VDI 25, 1 compressed air filter unit DSL 02D-SF-Goring 2-MBL, nominal flow rate: approx. 900 m³/h, 1 cooling unit HYDAC RFCS-AH-030, year of construction: 2021, serial no.: 2300040370, 1 hydraulic unit KNOLL TG 30, year of construction: 2022, serial no.: 1570792, 1 hydraulic cooling unit BKW ET22V-134-B-DI, year of construction: 2022, serial no.: 834179, 1 chip conveyor KNOLL 320 S-1/225, year of construction: 2022, serial no.: 2204044, control: BENZINGER Bedpfex Akkvjx Aafolc

Year of construction: 2019, operating hours: 31,933 h, condition: used, machine/vehicle number: 710300, Weight: 4,200 kg, 7-position tool changer, handling robot YASKAWA YR-MA1440MH12-A00, year of manufacture: 2018, serial number: K17464-426-1, automation system/workpiece storage EGS Automation Benzinger, year of manufacture: 2018, serial number: 180103, SIEMENS control, tool monitor, chip conveyor KNOLL 320 S-1/225, year of manufacture: 2018, serial number: 1350025, HYDAC cooling unit, compressed air filter system DSL Sigmatec 15, joining module PROMESS UFM Line5 Blodex Aki Espfx Aafsc

Year of construction: 2018, operating hours: 32,615 h, condition: used, machine/vehicle number: 710299, Travel ranges (X/Y): 37/25 cm, Weight: 4,200 kg, 7-position tool changer, SIEMENS Sinumerik control, NORDMANN Tool Monitor, KNOLL 320S-1/225 chip conveyor, Year of manufacture: 2018, Serial number: 1350024, HYDAC cooling unit, DSL Sigmatec 1 compressed air filtration system, YASKAWA YR-MH00012-A00 handling robot, Year of manufacture: 2018, Serial number: K17752-594-1, EGS Sumo Ecoplex Automation Benzinger automation system/workpiece storage, Year of manufacture: 2018, Serial number: 180102, double, 1 auxiliary table Bledpfx Aaex Akixsfsc

Year of construction: 2015, operating hours: 18,025 h, condition: used, machine/vehicle number: 0031000248A, Stock No.: 394600, travel X/Z: 267, 5x600 mm, max. turning diameter: 400 mm, max. spindle speed: 4,000 rpm, net weight: approx. 5,200 kg, dimensions LxWxH: approx. 410x183(252)x190 cm, control: SIEMENS Sinumerik 840D sl, with SCHUNK 3-jaw chuck, 12-position tool turret, chip conveyor, steel cabinet, double-door, contents: various tool holders, approx. 60 pieces, partially equipped Bsdoyciuzepfx Aafolc

Year of construction: 2014, condition: used, machine/vehicle number: 239319, recorded operating hours: 14,765 (as of 08/25), weight: 6,760 kg, 12-position tool changer, MAZATROL Smart control, lubricant processing system, chip conveyor, spindle stroke: 1,300 mm, max. machining diameter: 380 mm, SMW K3-ZSW steady rest, ATTENTION: Collection of this item only by prior arrangement!!! Bjdpfoycitdjx Aafjlc

Condition: used, Year of construction: 2018, operating hours: 12,678 h, machine/vehicle number: 290060, Weight: 16,800 kg, 48-position tool changer, travel paths (x/y(z): 4 mm, with lubricant processing, chip conveyor, cooling unit, control cabinet. ATTENTION: Collection for this item by prior arrangement only!!! Bjdpeycitkefx Aafolc

Condition: used, Year of construction: 2006, machine/vehicle number: 184628, Weight: 7,100 kg, 30-position tool changer, movable T-slot clamping table, MAZATROL 640M control, travel (x/y/z): 1 mm, lubricant processing system, chip conveyor, control cabinet, without machine vises, ATTENTION: Collection for this item only by prior arrangement!!! Bljdsycir Tepfx Aafoc

Year of construction: 2021, operating hours: 9,159 h, condition: used, machine/vehicle number: 374-19, the documentation is attached as a PDF Bedpfxeyciu Io Aafolc

Year of construction: 2021, operating hours: 16,807 h, condition: used, machine/vehicle number: 374-20, the documentation is attached as a PDF Blodpfeyciu Uex Aafsc

Condition: good (used), Year of construction: 2007, Machine is in good working condition. Machine come without automatic line. Marked equipement with red not come.. Some accesories and machine equipement are also available. More specs of the machine, check last two pictures. Bsdjxf Iamspfx Aafelc

Condition: good (used), Year of construction: 2010, AWEA 1250, 15.000 rpm coolant thru spindle, Tool changer 40 places Bjdsxu Ew Uspfx Aafelc Parts shown by hand not come. Machine vices, plate on table not come with machine.

Year of construction: 2003, condition: ready for operation (used), A fully autonomous CNC dual-spindle turning machine Index is available. Turning diameter: 220mm, main spindle bar capacity: 65mm, main spindle power chuck diameter: 210mm, sub-spindle bar capacity: 60mm, sub-spindle power chuck diameter: 210mm, tool stations: 12, Y-axis travel: 120mm, gripper diameter range: 4mm-45mm/40mm-65mm, coolant pump pressure: 8bar, high-pressure pump capacity: 80bar, chip conveyor discharge height: 1250mm. Overall system dimensions X/Y/Z: approx. 9150mm/4350mm/2000mm, weight: approx. 10500kg, operating hours: approx. 92000h. Including bar loader FMB turbo 8-80 XT/3200A, automatic loading and unloading system alphaMAX 6-axis, chip conveyor, coolant system, high-pressure pump and spare parts. Operation with the loading and unloading system is designed for disc diameters from 80mm to 220mm. This is a fully automated system without operator. Documentation available. On-site inspection is possible. Expected to be available from June 2026. Bljdpfsyfv Nkex Aafsc

Year of construction: 2006, condition: ready for operation (used), Turning diameter: 220mm, main spindle bore: 65mm, counter spindle bore: 60mm, tool positions: 12, Y-axis travel: 120mm, gripper diameter range: 4mm-45mm/40mm-65mm, coolant pump pressure: 8bar, high-pressure pump output: 80bar, chip conveyor discharge height: 1250mm. Overall system dimensions X/Y/Z: approx. 9150mm/3000mm/2000mm, weight: approx. 9500kg, control system: Siemens 840D, operating hours: approx. 115000h. Including multi-channel loading magazine Breuning/IRCO PROFImat 65.8-PR270/8, portal unloading unit, chip conveyor, coolant system, high-pressure pump and spare parts. Documentation available. On-site inspection is possible. Expected to be available from May 2026. Bedpfx Aaeyfv Nqofjlc

Condition: excellent (used), Year of construction: 2019, CNC Lathe 2-Axis Doosan Puma GT2600 Year of manufacture: 2019 Control: Fanuc i Series with Manual Guide Max. turning diameter: 460 mm Max. turning length: 658 mm Spindle speed (belt drive): 3,500 rpm Spindle bore: 81 mm SMW Autoblok chuck 250 mm Axis travel: Bjdpfsycgpcex Aafjlc - Z axis: 680 mm - X axis: 265 mm 12-position tool turret Tailstock Renishaw tool probe - chip conveyor with tank and pump - documentation - tool holders Operating hours: 2,700 hours Very good condition

Year of construction: 2002, condition: used, The machine has two working axes and two service axes (2+2), Y and X. Steady rest and tailstock are motorized. Bedpeycgulefx Aafolc Further details will follow...

Condition: excellent (used), Year of construction: 2006, operating hours: 13,556 h, turning diameter over cross slide: 324 mm, turning length: 600 mm, turning diameter: 680 mm, spindle bore: 79 mm, rotational speed (max.): 5,000 rpm, Hello, I have for sale a DMG GILDEMEISTER CTX 420 v3 CNC lathe, year of manufacture 2006. The machine is in very good technical and visual condition, equipped with Sinumerik 840D ShopTurn control. Tool probe installed, all tools are driven on the C axis. The lathe is connected to power and can be inspected under working conditions. Only 13,500 working hours. Technical data: Bledpfx Aaeyfuazofoc Working area: * Maximum turning diameter: 680 mm * Turning diameter over bed: 680 mm * Maximum turning diameter over cross slide: 324 mm * Maximum turning length: 600 mm * Spindle bore diameter: 79 mm * Maximum spindle speed: 5000 rpm * Tool measurement probe The lathe has only 13,500 operating hours.