Used Lathe Vertical for sale (12,376)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, turning diameter: 140 mm, turning height: 380 mm, turning diameter over bed slide: 250 mm, TECHNICAL DETAILS Turning diameter: 140 mm Swing diameter: 250 mm Turning height: 380 mm Travel paths Travel - X axis: 300 mm Travel - Z axis: 700 mm Spindle Spindle speeds: 1 - 6,000 rpm Drive power 40% duty cycle: 38.00 kW Spindle nose: DIN 55026 - size 6 Spindle bore diameter at front bearing: 110 mm Feed & Rapid Traverse X-axis feed rate: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min X-axis feed force: 9,000 N Z-axis feed rate: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Z-axis feed force: 10,000 N Tools Number of tools in turret 1: 11 Number of tools in turret 2: 11 Toolholder: VDI 40 Gsdpfx Aexf A Npjfisuh MACHINE DETAILS Control: SINUMERIK 840D Total power requirement: 70.00 kW Machine weight: approx. 22.00 t Space requirements: approx. 5.80 x 8.60 x H3.80 m EQUIPMENT Chip conveyor Extraction unit Infeed and outfeed Reversing gripper

Condition: ready for operation (used), functionality: fully functional, MACHINE DETAILS Godsxmgyzepfx Afisuh Weight: 14,000 kg

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 10436, travel distance X-axis: 626 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 5,500 rpm, workpiece diameter (max.): 260 mm, controller model: SIEMENS SINUMERIK 840, Equipment: documentation/manual, Tools in the pictures are included in the sale. TECHNICAL DETAILS Control: SIEMENS SINUMERIK 840 Speed: 5,500 rpm Swing diameter: 260 mm Travel path - X: 626 mm Travel path - Z: 250 mm Spindle bearing diameter: 32 mm Godpfx Afjxnz Sueisuh Nominal speed: 1,200 rpm Rapid traverse speed X-axis: 60 m/min Rapid traverse speed Z-axis: 30 m/min Turret positions: 12 pieces MACHINE DETAILS Machine length: 1,685 mm Machine width: 2,400 mm Machine height: 2,850 mm Machine weight: 8 t EQUIPMENT - Spindle head with short taper DIN 55026: A6 - Pallet conveyor WPS - KNOLL system (2010) - SAUTER turret (12 places) - Documentation available

Condition: good (used), Year of construction: 2013, operating hours: 44,500 h, EMAG VL5i vertical turning machine (2013) Manufacturer: EMAG Type: VL5i Year of manufacture: 2013 Operating hours: 44.500 Gjdpoxnnigsfx Afisuh Condition: good, used, in production Control SIEMENS 840 D SL Emulsion mist extraction chip conveyor Further information will follow

Condition: used, Year of construction: 1979, Year 1979 Retrofit 2013 max. turning diameter 1300 mm table diameter 1000 mm workpiece height max. 1500 mm working lenght 1050 mm 280 U/min. T-slots 48 x 28 speeds 4,75 - 250 U/min rapid traverse 6000 mm/min In our opinion, the machine is in good used condition and can be inspected Gjdpfx Aexmk E Usfisuh condition and can be inspected under power by appointment. Retrofit 2013 Precision class: IT7 Technical features - 4-fold swivel head Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale

Condition: good (used), Year of construction: 2015, functionality: fully functional, workpiece weight (max.): 100,000 kg, turning diameter: 6,000 mm, rotational speed (max.): 25 rpm, spindle speed (min.): 25 rpm, travel distance Z-axis: 1,500 mm, Main Technical Features • Gujdpoxnyh Uefx Afijh Manufacturer: SCHIESS Model: 18’ VBM Chuck Diameter: 5,500 mm Maximum Turning Diameter: 6,000 mm (distance between columns) Maximum Workpiece Height: 4,400 mm Movable Crossrail: 3,000 mm travel RAM (Z-axis): 1,500 mm travel Maximum Weight on Chuck: 100 tons Rotation Speeds: Range I: 1-8 rpm; Range II: 5-25 rpm • CNC Control: FAGOR 8055 (2015) Machine Condition: In operation and dismantled SCHIESS 18’ VBM vertical lathe—a robust machine featuring the oversized capacities typical of its era. Manufactured in Germany and retrofitted in 2015, this lathe is ideal for machining large, heavy workpieces. It is suitable for a wide range of industries, including metallurgy, general machining workshops, mechanical component production, heavy structural fabrication, and energy generation. PRICE AND FURTHER INFORMATION ON REQUEST (CNC, SIEMENS, HAAS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORI SEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKES)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,050 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 7,500 rpm, turning diameter: 220 mm, turning height: 175 mm, TECHNICAL DETAILS Turning diameter: 220 mm Swing diameter: 270 mm Turning height: 175 mm Control & axis travel Control: SIEMENS 840 D SL X-axis: 660 mm Gjdpoxf Apvofx Afisuh Y-axis: 300 mm Z-axis: 200 mm Spindle & tool change Max. speed: 7,500 rpm Tool changer: 12-station MACHINE DETAILS Total power requirement: 24 kW Machine weight: approx. 5.2 t Space requirement: approx. 2.5 x 1.6 x 2.3 m

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, turning height: 1,150 mm, workpiece weight (max.): 5,000 kg, turning diameter: 1,400 mm, feed length X-axis: 750 mm, feed length Y-axis: 180 mm, faceplate diameter: 1,250 mm, total height: 4,000 mm, total width: 3,000 mm, total length: 3,000 mm, type of input current: AC, rotational speed (max.): 315 rpm, rotational speed (min.): 3 rpm, torque: 50,000 Nm, table diameter: 1,250 mm, year of last overhaul: 2021, workpiece diameter (max.): 1,400 mm, overall weight: 12,000 kg, faceplate torque: 14,000 Nm, Equipment: documentation/manual, rotational speed infinitely variable, Very stable and compact Schiess vertical lathe, completely renewed, new electric, Siemens 840D controls. Guedpfx Asw H A Abofish

Condition: new, Year of construction: 2025, Ref. -No.: 10461 Manufacturer: IGREK Type: DT 4000 Year of construction: 2025 Type of control: CNC Control: SIEMENS SINUMERIK 840D SL Storage location: Istanbul Country of origin: Türkiye Spindle Speeds: 4000 RPM Turning Height: 2000 mm Table Diameter: 4000 mm Spindle power: 37 kW Max. Table load: 40 t Rotate table rotation speed: 60 RPM Max. Turning diameter: 5000 mm Max. Turning height over faceplate: 2000 mm Max Spindle Torque: 1200 Nm Spindle Taper: ISO 50 Machine length: 7500 mm Machine width: 12000 mm Machine Height: 9500 mm Weight Of The Machine Ca.: 125 t Further information: Ram Slide Stroke: 2100 mm Ram Section: 350 x 350 mm Vertical Travel of the Moving Traverse: 2000 mm Table Drive System: Segmented Direct Drive Motors Table Torque: 8200 Nm - 14400 Nm max. Gusdpjxmd Sujfx Afijh Table Guide System: Hydrostatic Bearing and Guides IGREK DT 4000 – Your solution for precise heavy-duty machining The IGREK DT 4000 is a state-of-the-art CNC vertical turning center designed specifically for the precise machining of large components. Equipped with a 4,000 mm hydrostatic rotary table and a movable crossbeam, it enables the efficient machining of workpieces with a maximum turning diameter of 5,000 mm and a turning height of up to 2,000 mm. Key features: Hydrostatic rotary table: The 4,000 mm rotary table with hydrostatic bearing ensures maximum precision and smooth running when machining heavy workpieces. Movable crossbeam: The vertically movable crossbeam with a stroke of 2,000 mm offers flexibility and allows adaptation to different workpiece heights. Powerful spindle: With a spindle speed of up to 4,000 rpm and a power of 37 kW, the machine is designed for demanding machining tasks. High load capacity: The rotary table can accommodate workpieces weighing up to 40 tons, enabling the machining of large and heavy components. Multifunctional machining: Thanks to the live spindle and the precise positioning of the C-axis, milling and drilling operations are possible in addition to turning, which increases the versatility of the machine. The IGREK DT 4000 combines advanced technology with high performance and flexibility to meet the requirements of modern manufacturing processes. Its robust construction and wide range of machining options make it the ideal solution for the precise machining of large components in various industries.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Vertical Turning Lathe – WEBSTER & BENNETT R48R 2PB C-axis, driven tools Godpfxoxl E R Nj Afijuh Condition: Used Year of manufacture: 2006 CNC: Siemens 840D Powerline Technical Specifications Faceplate diameter: 1,200 mm Turning diameter: 1,200 mm Number of slides (ram): 1 Ram stroke: 1,200 mm Ram cross-section: 200 × 200 mm Max. workpiece height under crossbeam: 1,200 mm X-axis travel: 1,200 mm C-axis: available (C-Axis) Drives / Speeds Main spindle motor: 37 kW Main spindle speed: 0.2 – 430 rpm Milling spindle motor: 17 kW Milling spindle speed: 20 – 3,000 rpm Tool changer Turning: 50 positions, Capto C6, robot handling Milling: 10 positions, ISO 50, robot handling Other features Magazine and stations for turret/tool holders Machine weight: approx. 18 t Scope of delivery as described above only. Further options/accessories only as per written agreement.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min Gsdpfx Asw Hyd Asfiouh power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21. If you are interested, the machine can be demonstrated under power/chip.

Condition: used, Year of construction: 2016, IMPORTANT: The sale and delivery of this machine are strictly limited to customers whose registered office and delivery address are located within the European Union (EU). Delivery to recipients outside the European Union is excluded. Gedew Tidqspfx Afiouh Machine Details – PITTLER • Manufacturer: Pittler • Model/Type: LP03B • Serial Number: 2198 • Year of Manufacture: 2016 • TAR No.: 12244247 • Machine Weight: 19,500 kg • Country of Manufacture: Germany • CE Marked: Yes • Control System Manufacturer: Pittler T&S GmbH • Control System Type: Board PLS/G-RZ 10 Electrical Specifications: • Power Supply: 3-phase AC 400 V • Frequency: 50 Hz • Lighting Voltage: 42 V • Control Voltage: 230 V AC / 24 V DC • Control Fuse: 25 A • Max. Cable Length to Tool Head: 10 m • Coolant Supply Line: Connection as per site requirements

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 101331, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 5,000 rpm, turning diameter: 140 mm, turning length: 630 mm, TECHNICAL DETAILS Max. turning diameter: 140 mm Chuck swing diameter: Ø 250 mm Turning height: 630 mm Control: SIN840 PL Spindle Spindle speeds: continuously variable 1 - 5,000 rpm Drive power (40% duty cycle): 38.00 kW Spindle head: according to DIN 55026 - size 6 Spindle diameter in the front bearing: 110 mm Axes X-axis travel: 300 mm X-axis feed: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min X-axis feed force: 9,000 N Z-axis travel: 700 mm Z-axis feed: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Feed force Z-axis: 10,000 N Tool turret Number of tools in turret 1: 12 Number of tools in turret 2: 12 Tool holder: VDI 40 DIN 69880 MACHINE DETAILS Total power requirement: 70 kW Machine weight: approx. 25 t Space requirement (L x W x H): approx. 6.8 m x 4.7 m x 4.3 m Gusdpfx Aexf An Sjfijh EQUIPMENT - Chip conveyor - HYFRA spindle air conditioning unit - Knoll coolant system

Condition: excellent (used), Year of construction: 2013, Control: SIEMENS Sinumerik 840D sl Working Area Max. workpiece height: 200 mm Max. workpiece diameter: 250 mm Max. turning diameter: 390 mm Max. distance spindle stop – turret: 580 mm Min. distance spindle stop – turret: 240 mm Spindles Gsdsw Hx Akepfx Afijuh Max. spindle speed: 5,500 rpm Spindle power per spindle: 37.7 kW Max. spindle torque per spindle: 300 Nm Spindle nose with short taper (DIN 55026): A6 Axis Travel X-axis travel (in working area with cover closed): 365 mm Total X-axis travel: 886 mm X-axis travel (over turret center): -20 mm Y-axis travel: +100/-80 mm Z-axis travel: 250 mm 12-position disk turret VDI 40

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, turning height: 1,020 mm, workpiece weight (max.): 10,000 kg, turning diameter: 1,560 mm, faceplate diameter: 1,480 mm, rotational speed (max.): 250 rpm, Titan VT 1700 Vertical Lathe with: - table diameter 1480 mm Gsdpfx Afjwi Ufmoiouh - maximum turning diameter 1560 mm - maximum load allowed in the spindle 10000 kg - maximum turning height 1020 mm - 12-position tool magazine - Fagor 8055 CNC - Rotomors 4-jaw hydraulic chuck - chip conveyor - year 2016 Free extension in 12/24 months

Condition: excellent (used), Year of construction: 2009, operating hours: 67,343 h, functionality: fully functional, All data will be provided upon request regarding this listing. The machine is dirty. Up until July, the machine delivered top tolerances at MAGNA POWERTRAIN and is otherwise in fully functional condition. Godpfoxl Ah Sex Afiouh

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 97485, turning height: 1,600 mm, workpiece weight (max.): 7,000 kg, turning diameter over cross slide: 1,700 mm, turning diameter: 1,600 mm, feed length X-axis: 2,000 mm, feed length Z-axis: 1,250 mm, feed rate X-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, total height: 6,765 mm, total width: 8,300 mm, total length: 9,000 mm, rotary table diameter: 1,300 mm, rapid traverse X-axis: 15,000 m/min, rapid traverse Z-axis: 15,000 m/min, torque: 26,300 Nm, spindle speed (min.): 2 rpm, spindle speed (max.): 380 rpm, table load: 7,000 kg, table diameter: 1,300 mm, overall weight: 40,000 kg, cone diameter: 50 mm, milling spindle motor power: 40,000 W, milling spindle speed (max.): 3,000 rpm, Pietro Charnaghi AC 16 TM Siemens Sinumerik 840C For tecnichal detals look at pictures Guedpswmbbvefx Afijh

Condition: good (used), Year of construction: 1979, functionality: limited functionality, Max turning diameter 1250 mm Table diameter 1120 mm Gusdpfx Afotva T Teieh Max. turning height 1000 mm Weight of the machine 19 000 kg

Condition: used, _____ Description: Year of manuf. : 2008 Control : Fanuc 18i-TB Gedpfx Aewkcldefiouh Turning diam. : 130 mm Turning length : 110 mm In Generel: Year of manufacture:2008 Control system:Fanuc 18i-TB Turning diameter:130 mm Turning length:110 mm Rotation diameter:200 mm Workpiece height max.:110 mm Spindle: Technology:Motor spindle Speed:7,500 rpm Power:24 kW Torque:158 Nm C-axis:0.001° Clamping cylinder:Full clamping cylinder Tool carrier (X/Z): Technology:Star turret Number of stations:12 Tool holder:VDI 40 Tool drive:6,000 rpm, 40 Nm X-axis:400 mm Z-axis:200 mm Equipment: Measuring systems:Direct (glass scales) Chip disposal:Chip conveyor Coolant supply:High-pressure pump Automation:Circulating workpiece storage Emulsion mist extraction:Mechanically prepared

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: YVX160TCO4876A, workpiece weight (max.): 8,000 kg, spindle motor power: 45,000 W, total length: 5,500 mm, total height: 5,400 mm, total width: 5,500 mm, type of input current: AC, input voltage: 380 V, workpiece diameter (max.): 2,000 mm, overall weight: 25,000 kg, workpiece height (max.): 1,200 mm, nominal power (apparent): 65 kVA, number of spindles: 2, rotary table diameter: 1,600 mm, number of slots in tool magazine: 16, Equipment: chip conveyor, documentation/manual, The YV-1600-ATC+C vertical turning centre is a large, high precision and heavy duty machine. The rigid vertical column and base are meehanite castings, heavily ribbed for reduced thermal distortion and vibration damping. It is built for heavy duty turning of large size workpieces. The machine has live spindle and 16 tools ATC. Gedoxl Avcepfx Afiouh Machine can be dismounted and loaded on truck by use of overhead crane.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Vertical Turret Lathe - Double Column / Brand: SCHIESS BRIGHTON Type: Vertimaster / Year of construction: 2009 The machine can be inspected by appointment. Condition: Fully functional / operational. TECHNICAL DATA: Working area and traverse: - Max. Machining- / Swing diameter: 9.000 mm - Processing height max.: 6.000 mm - Faceplate diameter: 6.000 mm - Passage width between racks/pillars: 8.300 mm Gjdpsxgv Egefx Afiouh Power and torque: - Main drive: 240 KW - Max. Torque on the face plate: 250 kN m - Max. Workpiece weight: 150 tons Boring and milling device: - Power max.: 63 kW - Speed max.: 2.500 rpm - Torque max.: 2.200 Nm Support: - Cross section: 520 x 420 mm - Injection diameter min.: 750 mm - Cutting power at 6 m Diameter max.: 75 kN EQUIPMENT: - CNC-Control: SIEMENS Sinumerik 840D - Tool holder: SK 50 - Operating platform - Chip conveyor - Documentation - Additional excellent accessories ... There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale. Detailed technical data sheet and information on equipment available on request.

Year of construction: 2001, condition: excellent (used), MAKE: EMAG MODEL: VL5 CNC: GE FANUC SERIES 18i TB Gusdpskzk Euofx Afieh Y.O.M: 2001 Max. Turning diameter: 300 mm Spindle diameter: 260mm Other info: The machine is complete in all its parts and accessories (manuals too)

Condition: good (used), Year of construction: 1998, functionality: fully functional, workpiece weight (max.): 10,000 kg, FMS with Pietro Charnaghi AC 16 TM and Colgar Prog 213 TR 120-90 Both Siemens Sinumerk controller Gedpowma H Rofx Afieuh 7 stk. Palett Ø1300mm

Condition: used, Year of construction: 2007, Technical details: faceplate diameter: 1600 mm power requirement: 80 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 4,4 x 4,62 m max. workpiece diameter: 2000 mm Gjdpfxevdgbqo Afieuh max. diameter of face turning: 1800 mm The machine has been regularly serviced and is in good technical condition. With C-Axis *

Condition: refurbished (used), Year of construction: 1980, turning height: 4,800 mm, Completely retrofitted Single Column Vertical Turning Lathe Blansko SKSJ 1A, equipped with a single vertical head suitable for both turning and milling operations. Technical specifications: - Face plate diameter: 6,300 mm - Maximum achievable outer diameter (with column at max. extension): 11,200 mm - Maximum workpiece height: 4,800 mm - Maximum turning diameter (column positioned near face plate): 8,000 mm - Maximum turning diameter (column at maximum extension, for internal turning): 16,000 mm - Infinitely variable face plate speed: 0.5 to 20 rpm - Maximum permissible workpiece weight on face plate: 125 tons The machine underwent a comprehensive retrofit in 2024-2025 and is equipped with the following brand-new components: - New electrical cabinet with CE-compliant components (Siemens, Schrack, etc.) - New Siemens 828 CNC, 100 kW main drive motor, 27 Nm feed motors, and ZF reducers (ratio 1:5) - New ballscrews on 2 axes (vertical head and cross rail) - New Heidenhain absolute scales on 2 axes - Hydraulic and lubrication systems fitted with CE-compliant components (Rexroth, Brevini, Atos, etc.) - New DROPSA (Italy) or equivalent central lubrication system - Geometric accuracy according to ISO standards – as per new-machine specifications Godpfx Afjw Hfm Njieuh For further information, please contact us.