Vertical turret lathe

CKD Blansko SKJ 25/50 CNC

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. Pjdpjxgnz Tofx Ah Hogg The machine is expected to be available from October/November 2025. The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, water tank capacity: 3,000 l, power: 300 kW (407.89 HP), year of last overhaul: 2025, water pressure: 1,000 bar, pump capacity: 131 l/min, Woma 325Z P30 diesel-driven high-pressure unit 1000 bar 131 l/min Well-functioning machine, ready for immediate use Machine built into a MAN TGA 26.320 6x2 year 2007 Euro 4 only 64,000 km truck is in top condition EXPORT ONLY Pedpfx Ahsxb Dp As Hogg

Condition: excellent (used), Year of construction: 2009, CNC for complete processing of door frames / jambs , either or adjustable door frames in DIN norm Working width max 3.000 mm Working width min 480 mm Workpiece thickness max 98 mm Workpiece width max 280 mm Aggregates per side 2 Saw aggregates per side 1 diam. 400 mm Pgodpjw Sd Uusfx Ah Hog Drilling supports per side 1 Drills per side 5 Aggregates longside 1 Milling aggregate with 2 spindles Aggregate tiltable in angle 45° Angle adjustment - programmable controller Width adjustment - programmable controller Conformity marking - CE mark Weight 2.500 kg

Condition: as good as new (ex-display), Year of construction: 2013, operating hours: 1,265 h, functionality: fully functional, spindle speed (max.): 20,000 rpm, turning diameter: 4 mm, Equipment: documentation/manual, rotational speed infinitely variable, Citizen R-series of automatic lathes dedicated to small-diameter machining. This machine is used very little (15800 parts cut). model year 2013. With ASP-04 barfeeder. Pgjdpfx Ajvtancsh Heg VAT is not needed if the sales happen outside of Turkey.

Condition: ready for operation (used), technical Details: Speed - 130m/min. , Year - 2006, run out table - 6 m Wire diameter range 4-12 mm Pgedpfxotndgpo Ah Hjg

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 31 h, 3D Coordinate CNC measuring device Profitech Innometrik Advanced in gantry design (demo unit at a special price) Open Cable Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. Pgodpfx Ahjdyah Se Hjg High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Technical specifications Measurement paths: X: 500mm Y: 600mm Z: 400mm Max workpiece weight: 250kg Weight of the machine: 850kg Dimensions over everything: 1290x1160x2350mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.2μm Volumetric length measurement deviation: MPEE = 2.2+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 90NI / min Also configurable as a complete package with touch probe, software commissioning and training. (Annual maintenance & calibration can also be offered)

Condition: used, Year of construction: 2009, Offered here is a used machining center from the manufacturer Deckel Maho DMG. The machine is powered up and can be inspected at our facility. Free loaded on truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control: Siemens 840 D Solutionline (PCU 50) Technical data: Travel distances X-, Y-, Z-axis: 1250 x 1000 x 1000 mm Feed rate X-, Y-, Z-axis: 20 - 60,000 mm/min Rapid traverse X-, Y-, Z-axis: 60 m/min B-axis travel: 360 x 0.001° B-axis feed rate: 10,800 °/min Max. rotation of table plate: 30 rpm Spindle speed: 20 - 8,000 rpm Gear stages: 2 Max. workpiece diameter: 1250 mm Pgodpjw Ew T Ssfx Ah Hsg Max. workpiece height: 1580 mm Clamping surface: 800 x 800 mm Max. workpiece weight: 1,500 kg Weight of pallet: 570 kg Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Max. tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of machine (without magazine or other accessories): approx. 20,000 kg Space requirement: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Accessories: Chip conveyor with coolant tank Coolant system 4x machine pallets Tool magazine Oil mist extraction Various new spare parts: 1x Length measuring system Y-axis (new) 1x Lubrication unit 230V 0.12 30 bar (new) 1x ZAHNRADP-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox *F1C-A25 (new) 1x Conversion kit power module (new) 1x Lifting devices for the machine

Condition: excellent (used), Year of construction: 2010, 7 axes Control FANUC 18i-TB Max. bar diameter 16 mm (main spindle) Max. bar diameter 16 mm (sub spindle) Max. spindle stock travel 205 mm Max. spindle speed 10,000 rpm Pedpfxownd Dpo Ah Hsgg Tools 5-position turning tool holder on linear slide 4-position drilling unit incl. drill holders (front/rear) 3 driven tools for cross machining on linear slide 4 tools incl. drill holders for rear machining

Condition: good (used), Year of construction: 2002, HEIDENHAIN TNC 430 control Spindle speed 20–9,000 rpm Travels X = 500, Y = 400, Z = 400 mm Tool holder SK 40 16-station tool changer Rotary table with B and C axes Clamping surface Ø 700 x 500 mm Max. table load 200 kg Infrared probe for workpiece measurement Pedpfx Aowglfxoh Hjgg

Condition: good (used), Year of construction: 1989, total height: 6,450 mm, For sale Beche short-stroke die hammer KGH 4B. Machine weight 65 t Working capacity 40 kJ max. impact frequency 98 min Psdpfx Ahert Uc Eo Hegg max. usable number of blows 41 min max. bear stroke 790 mm Machine is disassembled Technical data on request