Used Vertical Broaching Machine for sale (92,259)

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Hsdpfxjwuclxo Afiefn Number of controlled axes: 3 axes Total number of drilling spindles: 11

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations Hfsdpfew Nklhjx Afion - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: good (used), GOOD CONDITION Hfjdpfx Asxczh Esfijn

Condition: used, Year of construction: 2015, swing diameter 420 mm chucking diameter 400 mm x-travel 900 mm z-travel 495 mm spindle tunring speed 3.100 U/min number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected Hfodpfx Ajwqr S Tsfion under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Technical details: center height over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm hobbing length: 2000 mm number of teeth: 2 - 50 feed:: 0,023 - 5,17 / mm/min module max. : 8 / 12 Hsdpfxov U T Dye Afiofn spindle bore diameter: 102 mm workpiece rpm : 18 - 224 U/min tailstock quill adjustment: 100 mm total power requirement: 9,5 kW weight of the machine ca.: 5,2 t dimension machine xH: 3,6 x 2,1 x 2,0 m

Condition: excellent (used), Year of construction: 2009, swing diameter 1400 mm faceplate diameter 1250 mm Control SIEMENS work height max. 1100 mm table load 6 t total power requirement 80 kW weight of the machine ca. ca. 40 t Crossbeam travel: 700mm Crossbeam support Travel from centre of rotation to the right: 700mm Crossbeam support Travel from centre of rotation to the left: 700mm Machine table drive Main drive power: 80kW Number of gearboxes: 2 Step change: 3.84 Speed range of the 1st gear stage: 2-32-139 rpm Hfedpfxoud Ix Es Afisn Speed range of the 2nd gear stage: 9-125-500 rpm Max. Machine table load: 6 tonnes Feed drive Cross beam support Horizontal feed speed: 0.1 - 8 m/min Cross beam support Vertical feed speed: 0.1 - 8 m/min Cross beam support Rapid traverse speed horizontal/vertical: 8 m/min Cross beam adjustment speed: 425 mm/min Tool system Tool system: 180.1 Cutting force on the turning tool: 30 kN The machine enables additional drilling and milling via an integrated milling unit in the tool change system.

Condition: new, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15VWL1032, The machine includes fixtures for the production of electrical couplings in the following range: 250 - 800 mm SDR11 355 - 1200 mm SDR17 Hfjdpfx Aou Itk Rsfien 900 - 1200 mm SDR26 Original MSA drawings are also included. The VWL 1200 is a CNC controlled vertical three-axis electric pipe laying machine designed for laying medium to large fittings or pipes. The machine can produce fittings typically in the 250 to 1400 mm internal diameter range (1400 mm SDR17). An optional 2-axis CNC drilling unit is available for drilling fusion indicators during the wire laying cycle or for drilling end holes during the external profiling cycle. The VWL 1200 uses special fixtures that clamp onto an innovative feature that is integral to the coupling design, so that there is a separate fusion zone in each half of the coupling. The process of laying the wire starts at one clamp at the end of the coupling. The wire is inserted with twice the required pitch at the end of the fusion zone, whereupon the tool system rotates and then moves in the opposite direction between the first laid pitch until it reaches the resting position at the second clamp. The process is completed at the second part of the coupling. The VWL 1200 system is designed to allow the loading and unloading of larger couplings (which can weigh up to approximately 300 kg even before the wire is inserted). The machine has a completely open top, which allows easy loading overhead using a gantry system. Alternatively, parts can be loaded through the extra wide operator's door using suitable gripping and handling equipment.

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel Hfodpstrhq Hjfx Afijn - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: like new (used), CNC vertical jig boring machine WMW MIKROMAT Travel X: 1120 mm Travel Y: 710 mm Spindle travel Z: 315 mm Travel W: 630 mm Hfedpfx Ajgy E Dpofisn Numerical Command: CNC NUM 1060 Spindle: Ø 125 mm Cone: SA40 Rotation: from 36 to 2240 RPM Table size: 1400 x 900 mm Distance between colums: 1080 mm Maxi distance spindle nose/table: from 0 to 900 mm max Maxi eligible load on table: 1000 kg max Separate electrical panel Machine renewed in 2000 with CN NUM1060 Voltage: 380 V Dimensions (L x W x H): 4000 x 2460 x 3030 mm Weight: approx. 9 T

Year of construction: 1985, condition: good (used), Offer 21135 Technical data: - Roller diameter 420 mm - throat 410 mm - max. passage height 265 mm - table size 600 x 600 mm Hfodpfeg Aid Ssx Afijn - table left + right tiltable 15 / 30 ° each - table height from floor 1020 mm - saw blade length 3150 - 3260 mm - saw blade width 3 - 16 mm - 8 cutting speeds approx. 18 - 562 m/min - drive 400 V / 1,1 / 1,7 kW - Weight approx. 650 kg - Space requirement approx. W 900 x H 1900 x D 1000 mm - E. foot switch

Condition: ready for operation (used), Year of construction: 2021, Control Unit Brand SIEMENS Model SINUMERIK 840 D sl Additional Equipment Measuring System: Linear in both axes Hfsdpfxsxb E N De Afien This 5-axis Pittler PV2500 was manufactured in 2021, featuring a CNC vertical lathe with a maximum swing diameter of 3,000 mm and a turning diameter of 2,800 mm. It includes a double tool holder with Capto C8 interface, high-pressure coolant capabilities, and a robust spindle supporting up to 25,000 kg load. Ideal for complex, large-scale machining tasks. If you are looking to get high-quality turning capabilities consider the Pittler PV2500 machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, machine/vehicle number: 007194, X axis working area: 3200 mm Hfjdpfx Aswuz Avofisn Y axis working area: 900 mm Main Electrospindle power: 4.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 20 Total number of tool changer positions: 5

Condition: used, CNC Vertical Travelling Column Bed Milling Machine DECKEL MAHO Vertical Machining Center Type DMF 220 linear Serial No.: 15115223474 Year of manufacture: 2008 CNC 3-D contouring control Heidenhain iTNC 530 Travel X: 2200 mm, Y: 560 mm, Z: 720 mm Table size 2600 x 605 mm Table load capacity 2200 kg Table height above floor 870 mm Distance table to spindle nose max. 752 mm Spindle taper SK 40 (DIN 69871 A) - ISO40 with drawbar DIN 69872 Spindle speed max. 12,000 rpm Hsdpfx Ajw Iqt Aefiofn Spindle drive 35 kW at 40% duty cycle / 25 kW at 100% duty cycle Feed rate 0–20,000 mm/min Rapid traverse X-axis 100 m/min Rapid traverse Y+Z-axis 50 m/min Power supply 400 Volt, 50 Hz, 73 kVA - 30-position tool changer - Internal coolant supply through the spindle, 40 bar (IKZ) - Air blast with minimum quantity lubrication for tool cooling - Air blast through spindle center via M-function - 2 rotating safety windows - Operating mode 4, process monitoring during production - Electronic handwheel at the handheld command station - Separate coolant treatment system, paper band filter with filtration sump - Chip conveyor for positioning under the work area - Centralised grease lubrication - Operating manual - Operating hours – control on = 75,188 h - Operating hours – program run or spindle on = 31,632 h - Controller with interfaces for data transfer, RS232C + USB Footprint L x W x H 650 x 400 x 280 cm Space requirement for main machine L x W x H 490 x 395 x 275 cm (with control panel) Space requirement for chip conveyor L x W x H 550 x 90 x 160 cm (approx. 500 kg) Space requirement for coolant unit L x W x H 180 x 115 x 190 cm (500 kg) Main machine transport dimensions L x W x H 500 x 248 x 275 cm Additional transport space required for further parts 550 x 240 x 250 cm Weight of main machine approx. 12.5 t Good condition

Condition: good (used), Year of construction: 2001, machine/vehicle number: 21022, Item 25091 Technical specifications: - Roller diameter 420 mm - Throat depth 400 mm - Max. clearance height 280 mm - Table size 600 x 600 mm - Table tilts in 2 planes ± 45° and ± 15° - Table height from floor approx. 975 mm - Saw blade length 3200 - 3400 mm - Continuously variable saw blade speed 10 - 260 m/min - Drive 400 V / 0.9 / 1.7 kW Hodpfov U Swxsx Afiofn - Weight approx. 500 kg - Space required approx. W 750 x H 1950 x D 1150 mm

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand SIEMENS Model SINUMERIK 840 D sl This 4-axis Pittler PV4000 was manufactured in 2018. A robust vertical turning machine, it features a max swing diameter of 3,800 mm and a spindle load capacity of 35,000 kg. It includes a Siemens SINUMERIK 840 D sl control system, rapid traverse speeds up to 32 m/min, and a tool magazine with 25 positions. Consider the opportunity to buy this Pittler PV4000 vertical turning machine. Contact us for more information about this machine. Hodpfjxb E N Rex Afisfn Application Types Turning

Condition: used, machine/vehicle number: 007565, X axis working area: 3200 mm Y axis working area: 900 mm Main Electrospindle power: 4.5 KW Hfodpswucllsfx Afien Number of controlled axes: 3 axes Total number of drilling spindles: 16

Condition: used, Vertical grinding machine, surface grinding machine DORMAC / DORIA type Perseo Cup grinding machine No. 786 Year of manufacture 1987 Sanding area 500 x 250 mm Magnet 400 x 150 mm Grinding height grinding wheel - magnet approx. 190 mm Hsdpfxsvkgvhe Afisfn Grinding height grinding wheel - clamping surface table approx. 235 mm Grinding wheel diameter 175 mm Table longitudinal movement approx. 600 mm Grinding wheel speed approx. 2800 rpm Motor power approx. 2.2 kW Mains connection 380 Volt, 50 Hz - Manual depth adjustment via handwheel, travel per handwheel rotation, Z-axis 2.5 mm = 0.01 mm per graduation mark - handwheel on the right of the spindle housing, fine adjustment via knurled wheel on the handwheel - Manual transverse adjustment via handwheel, travel per handwheel revolution, Y-axis 2 mm = 0.01 mm per graduation mark - Hydraulic longitudinal table movement - mechanical magnet WAGNER, type 0112N-15/40-4 400 x 150 mm, height 45 mm - Wet grinding unit with settling filter opposite - 2 grinding wheels Ø 175 mm - 1 grinding wheel holder - 1 balancing device for the grinding wheels Space requirement L x W x H 1500 x 1100 x 1800 mm Weight 570 kg good condition

Year of construction: 1986, condition: good (used), machine/vehicle number: 26647, Technical data:-Roll diameter 420 mm -Throat depth 410 mm -Max volume height 265 mm Hjdpfx Ajct Nm Uefiefn -Table size 600 x 600 mm -Table li. + re. Tiltable 15 / 30 ° -Table height 1020 mm -Blade length 3150-3260 mm -Saw band width 3-16 mm -8 speeds 12-375 m / min -Drive: 400 V / 1.1 / 1.7 kW -Weight approx. 650 kg -Space requirement approx. B 900 x H 1900 X 1000 mm -with: - blade welding machine in the machine base - grinding wheel and lamp -Scissors, air pump and lighting

Condition: used, machine/vehicle number: 007468, X axis working area: 3200 mm Hfedpfowuz Tusx Afijn Y axis working area: 1300 mm Main Electrospindle power: 11 KW Number of controlled axes: 3 axes Total number of drilling spindles: 36 Total number of tool changer positions: 10

Condition: used, Slotting head, suitable for DECKEL type FP 2 milling machine Manufacturer No. 2211 / 1895 Dovetail width: approx. 76 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 320 mm Dovetail leading edge to gear center: approx. 235 mm Stroke size: max. 80 mm Stroke rate: max. 210 double strokes/min. Tool holder: square, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Driven by the machine gear, within the dovetail guide (as with a normal vertical head) - This slotting head is inserted into the dovetail guide in place of the normal vertical milling head (Mounted in place of the vertical milling head, milling head) - Drive gear in the slotting head, 39 teeth, gear width 16 mm, presumably 20° pressure angle - Slotting head on the flange plate can be rotated 360°, degree scale +/- 35° Weight: 32 kg Very good condition DECKEL FP1 has a pressure angle of 15° on the drive gear Hfodpfx Aswbi Rbofijn DECKEL FP2 + FP3 - has a pressure angle of 20° on the drive gear

Condition: good (used), Year of construction: 1981, machine/vehicle number: 12236-81, Offer 24157 Technical data: - Roller diameter 420 mm - projection 400 mm - max. passage height 325 mm - Table size 600 x 600 mm - Table can be tilted left / right 10° / 45° - Table height from floor approx. 1030 mm - Saw blade length 3450 - 3640 mm - Band width max. 25 mm - infinitely variable band speed 15 - 1500 m/min - Drive 400 V / 1.5 kW Hfedpetwbxnofx Afion - Weight approx. 500 kg - Space requirement approx. W 800 x H 1850 x D 1000 mm - with: - IDEAL saw blade welding unit - lighting

Condition: used, machine/vehicle number: 006639, X axis working area: 2600 mm Hfjdpfxswuz Hhs Afion Y axis working area: 900 mm Total number of drilling spindles: 22

Condition: good (used), Year of construction: 1993, machine/vehicle number: 28794, Offer 24419 Technical data: - Roller diameter 520 mm - projection 510 mm - max. passage height 420 mm - Table size 750 x 800 mm - Table swivels left + right 15 / 30 ° - Table height from floor 1020 mm - Saw blade length 4120 - 4200 mm - saw blade width 20 - 25 mm - infinitely variable cutting speed - level 1 18 - 160 m/min - Stage 2 240 - 2280 m/min Hfodpjuk D I Rsfx Afion - Pneumatic connection 6 bar - Drive 400 V / 5.5 kW - Weight approx. 1100 kg - Space requirement approx. W 1200 x H 2200 x D 900 mm - with: - table feed - Saw blade welding unit in the machine stand - Grinding stone - Shears + air pump - lighting

Condition: good (used), Year of construction: 1997, machine/vehicle number: 97-04002, Offer 25114 Technical specifications approx.: - Roller diameter 500 mm - Throat depth 500 mm - Max. clearance height 400 mm - Table size 630 x 530 mm - Table tilts 10/30° - Table height from floor 950 mm - Saw blade length approx. 3900 mm - Saw blade width approx. 3 - 25 mm - Cutting speeds (presumably) 81 - 145 - 208 - 267 m/min - Drive 400 V / 1.1 kW - Weight approx. 400 kg - Space required approx. W 750 x H 2000 x D 1000 mm Hfsdpfowmnz Nex Afisn

Condition: good (used), Year of construction: 1981, machine/vehicle number: 11790-81, Offer 23402 Hedpferi R Azox Afiefn Technical data: - Roller diameter 420 mm - projection 400 mm - max. passage height 325 mm - Table size 600 x 600 mm - Table can be tilted left / right 10° / 45° - Table height from floor approx. 1030 mm - Saw blade length 3450 - 3640 mm - Band width max. 25 mm - infinitely variable band speed 15 - 1500 m/min - Drive 400 V / 1.5 kW - Weight approx. 500 kg - Space requirement approx. W 800 x H 1850 x D 1000 mm - with: - IDEAL saw blade welding unit - lighting