Used Vertical Broaching Machine for sale (65,908)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, operating hours: 5,560 h, Equipment: chip conveyor, CNC controller: SIEMENS 828D OP Axes X-axis travel mm: 550 Y-axis travel mm: 550 Z-axis travel mm: 510 Rapid traverse m/min: 24 Worktable Table dimensions mm: 850x650 Max. workpiece weight kg: 600 Spindle Spindle speed rpm: 12.000 Spindle drive power kW: 13/9 (40/100% ED) Spindle torque Nm: 83/57 (40/100% ED) Cooling Cooling through the Spindle Center bar: 20 Tool system Tool holder: SK40 Tool magazine slots: 24 Max. Tool Diameter With free neighboring places mm: ø130 With occupied neighboring places mm: ø80 Max. Tool Length mm: 300 Max tool weight kg: 8 Equipment Electronic Handwheel Chip conveyor Lsdpfx Asu Tk Hdoiijhh Mist collector Coolant gun RENISHAW Measuring probe Rated power kVA: 20 Basic machine dimensions / weight Length mm: 3.070 Width mm: 2.670 Height mm: 2.840 Weight kg: 5.600

Condition: good (used), Year of construction: 2009, 1 used vertical machining center Manufacturer: Mikron Type: HPM 600 HD Year of manufacture: 2009 Control system: Heidenhain ITNC 530 Technical data: Travel ranges: X 650 mm Y 600 mm Z 500 mm Spindle mount: HSK 63 Max. spindle speed: 2000 rpm Table size: 800 x 600 mm Number of tool positions: 30 Equipped with: Lhjdjzamngepfx Aiish Laser measurement system Measuring probe Operating mode: 3+4 axes ITC Intelligent Thermal Control Automatic central lubrication Mobile handwheel Tool air blow-off device Weight: 11 tons

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Model: FMV-1700 Year of Manufacture: 1999 Control System: FANUC Number of Tools: 24 Lhedpfx Aon D Ifisiioh Maximum Spindle Speed: 12000 RPM X-Axis Travel: 1700 mm Y-Axis Travel: 750 mm Z-Axis Travel: 700 mm Other Specifications: BT50 Movement System for Each Axis: Box Machine Weight: 9000 kg With fourth axis

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 100 kg, Vertical Balancing Machine Max.Rotor Weight 100 kg Min.Rotor Weight 5 kg Min.Diameter 100 mm Lhsdsylqg Dopfx Aiieh Max.Diameter 800 mm Engine Power 5.5 kW

Condition: good (used), Year of construction: 2016, Traverses XYZ: 1524 x 700 x 610mm, table size 1700 x 700mm, Table load 2,000kgs, Lsdpfxozcy Iro Aiijhh Heidenhain TNC 620 Control, Din 40 spindle taper, 48 station tool changer, Spindle speed 15,000rpm, through spindle Coolant, low volt light, swarf conveyor,

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Ljdow Ed U Nspfx Aiiehh Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: used, Year of construction: 2000, x-travel 880 mm y-travel 630 mm z-travel 630 mm weight of the machine ca. 8800 kg Ledpfxozfaxho Aiiehh

Condition: excellent (used), Year of construction: 2008, DMG DMC 635 V TNC530 Heidenhain Vertical CNC Machining Center The machine has undergone a thorough inspection, and the spindle has been overhauled, with bearing replacement and spindle taper grinding performed. It is in very good technical condition. Technical specifications: Travel range (X/Y/Z = 635/510/460) Working area (travels): X-axis: 635 mm Y-axis: 510 mm Z-axis: 460 mm. Spindle: Rotational speed: 20 – 8,000 rpm. Spindle taper: SK40 Lhedpfxozfarzj Aiish Work table: Dimensions: 790 x 560 mm. Maximum load: 600 kg. Tool magazine: Capacity: 20 tools. Feeds: Rapid traverse (X/Y/Z): 25 m/min Control: Heidenhain iTNC 530. Dimensions and weight: Weight: approx. 3,900 kg. Dimensions: approx. 3.0 m x 2.3 m x 2.5 m. The machine has a cast iron construction and is designed for precise machining of parts, often used in series production. It is possible to equip the milling machine with a 4th-axis rotary table. The machine can be inspected and tested at our company's premises.

Condition: excellent (used), Year of construction: 2016, operating hours: 13,000 h, functionality: fully functional, Vertical machine center Haas VM 6 with below options 12000 rpm spindle HSS Touch probe Lhjdpeyb S U Uofx Aiish Tool setter Through spindle coolant chip auger

Condition: used, Year of construction: 2006, Technical details: Lhjdpfx Aiendz Aqsieh x-travel: 1.500 mm y-travel: 700 mm z-travel: 610 mm control: HEIDENHAIN iTNC 530 table-size: 1.400 x 700 mm tool taper: SK 40 numbers of positions in the tool changer: 48 fach spindle turning speed - stepless: 15000 1/min rapid traverse: 36 m/min table load capacity: 700 kg spindle drive: 25 kW total power requirement: 30 kVA weight of the machine ca.: 9,1 t dimensions of the machine ca.: 3,7 x 2,65 x 2,9 m vertical machining center, 20 bar internal coolant supply with paper filter, 3D-touchprobe, chipconveyor, el. handwheel meter readings: approx. 43.600 h "machine on", approx. 20.000 h "spindle on", *

Condition: good (used), Year of construction: 2014, Traverses XYZ; 1020 x 830 x 245 mm, Table size 1000 x 700mm., Lhedpfx Aiezcwk Rjieh spindle taper HSK-E25, 5 station ATC, , Datron software

Condition: good (used), Year of construction: 2020, Traverses X Y Z; 3200 x 1500 x 900mm. B axis +/- 120 degrees, Lhjdezcv T Dspfx Aiijh C axis 370 degrees, Feed rate 90m/min, spindle speed 24,000rpm, spindle taper HSK 63.

Condition: used, Year of construction: 2002, functionality: fully functional, The machining center has been inspected by a Hurco technician and found to be fully operational without any faults. Technical Data - Travel ranges: X 1,270 mm, Y 600 mm, Z 610 mm - Drive power: 30 kW - Spindle speed: 15,000 rpm - Spindle taper: SK 40 Type B - Feed rate: up to 23 m/min Work Table: - Dimensions: 1,500 mm x 660 mm - Max. workpiece weight: 1,300 kg Control: - Hurco Ultimax 4, incl. software for milling simulation - electronic hand control unit - Interfaces: RS 232C / V24 - 2 monitors for text and graphics processing - 2 software units for plain text and ISO programming Lhedpfox Iikbsx Aiish Machine Construction: - High rigidity, suitable for roughing operations Tool Changer: - Double-arm changer with 24 stations Equipment: - Cooling unit for milling spindle - Rinsing system for chip removal - Splash guard cabin - Coolant system with filtration - Internal coolant supply ICS 20 bar - Chip conveyor Machine Data: - Required space (without service areas!) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm - Weight approx. 9,000 kg - Connected load 50 kVA, 400V, 50/60 Hz An inspection of the machine is possible by appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical changes and errors excepted.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, DECKEL MAHO DMF 220 linear Machine Type: Vertical CNC Machining Center Manufacturer: DECKEL MAHO Model: DMF 220 linear Control System: Siemens 840D ShopMill Technical Specifications - X-axis travel: 2,200 mm - Y-axis travel: 560 mm - Z-axis travel: 720 mm - Table size: 2,600 × 600 mm - Table load capacity: 2,200 kg - Tool holder: SK40 / HSK-A63 DIN 69893 - Spindle speed: 20 – 18,000 rpm - Feed rate: up to 20,000 mm/min - Rapid traverse X-axis: 100 m/min - Rapid traverse Y/Z-axis: 50 m/min - Tool magazine: 30 positions - Spindle hours: approx. 7,086 h - Idle running hours: approx. 24,652 h - Total power requirement: approx. 70 kVA - Machine weight: approx. 12.5 tons Lhodpfx Ajzd T T Njiioh Equipment & Features - Mineral cast machine bed - Chip conveyor with coolant tank - Cooling lubricant unit with compact filter system - AC servo drives on X, Y and Z axes - Hydraulic/mechanical tool clamping - Linear measuring system on all axes

Condition: good (used), Year of construction: 2006, Haas VF-5B/40HE vertical machining center, year 2006. Ledpfx Ajzcu Imoiiohh

Condition: good (used), Year of construction: 2004, Vertical machining center, Mazak VCN-510C, manufactured in 2004. Lodszcu D Uopfx Aiishh

Condition: used, VERTICAL MACHINING CENTER "FAMUP" MOD. MC 120/60 X-axis travel: 1200 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Rapid traverse X-Y-Z = 40-40-40 m/min Spindle: 12,000 rpm, 22.5 kW ISO 40 - DIN Table size: 1380x600 mm Max. permissible load: 800 kg Tool magazine: Random, 30 positions Control: SELCA S4045 PDH Lodpfsxwclhex Aiijhh

Condition: used, Year of construction: 2008, machine/vehicle number: 558-08, travel distance X-axis: 4,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 750 mm, MOBILE VERTICAL MACHINING CENTER “FAGIMA” MODEL SPIN ARROW CNC SELCA S4045 PDH ISO 50 spindle Spindle speed: 10,000 rpm Power: 15 kW Lhedpfxjy S Anbo Aiioh

Condition: like new (used), Year of construction: 2021, machine/vehicle number: 1000042824, We are offering for sale a very well-maintained Biesse BREMA EKO 2.2 machine from 2021. The machine includes tool changing, two drilling units, and a set of tools. Software: bSolid. Lhsdezcrfpopfx Aiioh The machine has been serviced by our technician, so we are very familiar with its condition and history. The machine can be tested at our showroom in Brno.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, We are selling a beautiful and well-maintained machining center from Fehlmann, a Picomax 60-M HSC. Machine data: Manufacturer: FEHLMANN Machine type: PICOMAX® 60-M Machine number: 14508674 Year of manufacture: 2008 Control system: Heidenhain iTNC 530 Operating hours: 12,799 Spindle hours: 5,303 Technical details: Travel in X-axis: 505 mm Travel in Y-axis: 355 mm Travel in Z-axis: 610 mm Spindle speed: 50 - 20,000 rpm Number of tool positions in the tool magazine: 24 Tool holder: SK30 Dimensions and weight: 2.0 m × 1.7 m × 3.0 m // 3350 kg Accessories for the machine: - Renishaw touch probe system OMP 40-2 with spindle adapter - Cold air nozzle for M-function, switchable - Direct path measurement system with compressed air supply - Thermal compensation - Compensation of spindle and thermal expansion - Ethernet interface - Laser system NT incl. blow-off nozzles for tool measurement and breakage check - 4th/5th axis FEHLMANN ATS 160 CNC automatic indexing table with double clamping in both axes and EROWA quick-change chuck ITS - Machine light - Spindle cooler - Handwheel - Coolant system with chip drawer and fine chip insert Ljdezcqtropfx Aiishh - Tools in the lower cabinet - Transport securing - Operating and programming manual (also for optional equipment) Software options: - HSC-SETUP cycle (axis optimization) - Potential equalization milling spindle - Alignment cycle for automatic alignment of the ATS - Engraving of uppercase and lowercase letters and special characters - Rotary table machining (in mm/min) - Fast 3D machining, 5-axis interpolation, spline interpolation - Extended energy-saving function and warm-up spindle + axes

Condition: ready for operation (used), Year of construction: 2006, DMG DMC75V linear, machining center, 5 axis Year: 2006 x-travel 885 mm y-travel 600 mm z-travel 600 mm control iTNC 530 Heidenhain Max. rpm 1 - 28.000 min/-1 power capacity - main spindel 35 / 25 kW Lhodpfsytd E Nox Aiioh max. Torque 119 / 85 Nm tool taper HSK A63 Swivel range milling spindle B: -10° / +110° ° spindle bearing diameter 80 mm table diameter 750 mm rotation range C: 360 ° rotary speed max. 100 min/-1 max. table load 600 kg feed speeds 1 - 90.000 mm/min rapid traverse 90 m/min Feed force X/Y: 13,8 kN Feed force Z: 10,35 kN number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 140 mm max. tool length 300 mm max. tool weight 10 kg max. workpiece height 460 mm Max. Workpiece Area ca. 750 x 600 mm passage max. 600 mm total power requirement 60 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,5 x 4,5 x 3,0 m Accessories/options: - including Fanuc robot - including palettizing system - 28000 rpm Kessler spindle - Through spindle coolant - Swarf conveyor - Clamping system Vice with jaws - full set of manuals

Condition: used, Year of construction: 2008, Technical details: x-travel: 850 mm y-travel: - mm z-travel: 315 mm swing diameter: 420 mm spindle speed:: 3400 U/min feed power: 11 kN tool taper: VDI 50 workpiece height max.: 160 mm workpiece diameter:: max. 340 mm tool changer with: 12 places feed power: 11 kN Total power requirement: 45 kW Weight approx.: 10 t complete plant: 5,3 x 4,19 x 3,5 m dimension machine xH: 3,8 x 1,45 x 3,5 m • Highly productive CNC vertical turning machine • Perfect for high-volume and mass production • Loading time: 4–6 seconds (depending on workpiece and clamping device) • Chip-to-chip time: 8–10 seconds (depending on process and workpiece) • Spindle nose: DIN 55 026 – Size 11 • Front spindle bearing diameter: Ø 160 mm Lhedpfozcn Tpex Aiish *

Condition: used, Year of construction: 2007, Technical details: x-travel: 680 mm y-travel: - mm z-travel: 250 mm swing diameter: 340 mm spindle speed:: 3400 - 4300 U/min tool changer with: 12 places spindle diameter in front bearing: 120 mm rapid traverse x + z axis: 45 / 30 m/min Total power requirement: 43 kW Weight approx.: 12 t complete plant: 9,0 x 4,0 x 3,3 m dimension machine xH: 3,8 x 1,5 x 3,3 m • Highly productive CNC vertical turning machine • Perfect for high-volume and series production • Commonly used in the automotive industry • Includes various accessories and live tooling (powered tools) * Lhsdpfx Aszcn Tcoiioh

Condition: used, Year of construction: 2003, Technical details: weight of the machine ca.: 9,5 t Lhodpfx Aszcnq Ijiish

Condition: used, Vertical machining center, Haas MiniMill, year 2005... Lhodpfx Aijy Idpxoijh