Used Veneer Turner for sale (686)

Condition: new, Solid block band saw for log diameters up to 130 cm. Soft starter included, extendable with additional sections. Automatic feed with stepless speed adjustment. Electric height adjustment conveniently operated from the control panel. 8.4-inch touchscreen LCD for height control. Equipped with telescopic log turner, log lifter, 3 telescopic angle stops with 2 extendable log clamps, powered log lifter for horizontal log feed, and coolant pump. Saw unit is suspended on both sides for greater stability and improved precision. CE certified. Technical Data: Cutting length: 6.6 m Max. log diameter: 1300 mm Max. board width: 1000 mm Kdodpevrvhvsfx Ahbou Max. saw blade stroke: 1080 mm Max. frame passage: 365 mm Motor ratings at 100% duty cycle: Main motor: 22 kW Feed motor: 3 kW Hydraulic unit: 7.5 kW Lift motor: 0.75 kW Saw blade size: 6500 mm x 50-60 mm Weight: 3600 kg Optional Special Equipment: Extension section, each 4 m 30 kW motor Pre-cutter unit Double-arm log lifter Telescopic log turner Chain log turner Log clamp Material return conveyor Material chute Sharpening machine Setting device Tarpaulin cover Extras not included in the price (Example image)

Condition: used, machine/vehicle number: 008587, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Ksdpfxoy In Dge Ahbodu Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 006710, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min Kjdpeqy Em Tsfx Ahbjdu

Condition: used, Fully automatic scarf jointing line for the following dimensions: thickness: approx. 24 – 100 mm, width: approx. 80 – 240 mm, scarf joint lengths: 400 – 1,500 mm, finished length: 2.50 m – 13.50 m, infinitely adjustable. Consisting of the following plant components: - SMB vacuum stacking system, longitudinal, with 2 lifting tables and 2 package conveyor lines, year of manufacture 2013, package dimensions max. 1.20 x 1.20 x 6.00 m, 4 suction pads, Sicko system, singulation and infeed into a conveyor line for scanner feeding, board turner, diverter for too moist, too dry, diverter for B-quality, marking station or automatic operation - Bidac end-face scanner for scarf joint detection, year of manufacture 2013 - Brookhuis moisture measurement FMI 5, year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras, and new optimization software - Dimter Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009, and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT scarf jointing system with rotary table, special pack AH 1050, year of manufacture 2005, consisting of: milling machine, tipping station, infeed section, length 5.0 m, cycle press, length 6.00 m, crosscut saw - SMB stacking machine, year of manufacture 1998, length 2.50 – 13.50 m, divisible into 2 units (e.g. 2 x 5.0 m), 8 stacking arms, 8 stacking tongues, manually adjustable stop, infinitely adjustable, electro/hydraulically controlled, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package ejector. Kdodpovvi Tyjfx Ahbou Location: Customer

Condition: used, Year of construction: 2026, Special price – demonstration machine, Garbsen. Our WL 6 machine concept. The Weima high-performance shredder, with its flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into wood chips, achieving a significant volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be loaded via a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without requiring manual assistance. The hydraulically controlled slide feeds the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependent controlled. The internal slide guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston seals. The patented and profiled V-rotor, made of solid steel, has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concave, aggressive, and four-way rotatable knives/cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees, through the resulting reduction in the cutting gap between the counter-knife and the rotor, a high throughput, low energy consumption, and an optimal discharge of the shredded material. The screen located under the rotor determines the chip size (10 - 100 mm). An optionally available, hydraulically opening screen basket is also available. The power transmission from the electric motors is via V-belts to a heavily dimensioned gearbox, which is attached to the rotor shaft on one side. Precise cutting at high throughput with a profiled V-rotor. The V-rotor, developed specifically by WEIMA, is universally applicable and made of solid material. Its aggressive material feed, with up to two knife rows, guarantees a high throughput with low power consumption. It can be equipped with hardened cutting knives made of steel with edge lengths of 30 mm and 40 mm. These can be repeatedly rotated when worn, which drastically reduces maintenance costs. Intuitive operation thanks to a Siemens PLC control with a touch display. To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. In doing so, we use only high-quality components – for example, from Siemens or Rittal. Intuitively operable touch screens guarantee quick adjustments. Functions such as adjusting the slide timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. Technical specifications WL 6: Feed opening 800 x 1,250 mm. Hopper capacity 0.9 m³. Rotor length 800 mm. Rotor diameter 256 mm. Drive power 22 kW. Rotor speed 90 rpm. Max. number of knives 42 pieces. Type and size of knives: concave / 40 x 40 mm, cutting crowns. Screen size 10-60 mm. Paint: WEIMA standard RAL 2022 / 7016. Connection value 400 V +/- 5% / 50 Hz. Weight approx. 1,600 kg. Including: - Control cabinet* (Rittal) incl. electrical control (Moeller / Siemens) and S Kdsdpfxsy D E Tdj Ahbsu

Condition: used, functionality: fully functional, SIPA shelving press for veneering, 2500 × 1280 Kdedpszmglqofx Ahbou Shelf length: 2500 mm Shelf width: 1280 mm Loading height: 440 mm Operating pressure: 120 bar Press with 4 cylinders Shelves heated with water from the boiler.

Condition: like new (used), functionality: fully functional, power: 7 kW (9.52 HP), saw blade diameter: 305 mm, total length: 3,100 mm, total width: 3,100 mm, overall weight: 3,000 kg, cutting length (max.): 3,100 mm, cutting height with scoring (max.): 70 mm, feed rate X-axis: 40 m/min, feed rate Z-axis: 50 m/min, space requirement length: 3,100 mm, space requirement width: 3,100 mm, Equipment: rotational speed infinitely variable, scorer, Panel Sizing System SCHEER PA 4136 – 3100 x 3100 The PA 4136 is a high-performance, electronically controlled panel saw designed for precise, efficient, and automated cutting of wood-based materials. Ideally suited for industrial applications in joineries, furniture production, and panel processing. Condition & Service: Kdsdpfowrn Efox Ahbeu Condition: Very good Functionality: Fully operational Warranty: 12 months CE-compliant and dust-tested (limit value < 2 mg/m³) Key Technical Data & Equipment: - Rip saw FM 20-3100 with hardened guides - Automatic forward & return travel of the saw unit (automatic lowering during return) - Feed drive via three-phase gear motor, frequency inverter controlled - Feed speed: 2 – 40 m/min (stepless) - Return speed (rapid traverse): 50 m/min - Extraction channels in machine base & pressure beam - Score saw blade adjustable externally (without opening the hood) - Safety hood locking with lamella curtain SZ 5008 - 3-step cutting height adjustment LA 4143 - 6 cut-out sections in the pressure beam for residual cuts down to 5 mm - Saw motor: 7.0 kW | Scoring motor: 1.1 kW (switchable) - Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: - Angle pressure device WP 5003 with clamping claw for cross cuts - Adjustment range: 2400 mm - Fully automatic control via DNC-AT - Material feed table HP 5091 - 2 upper guides, rack-and-pinion guidance - Servo drive for material pusher - Feed speed: 25 m/min (safety limited) - Return: 40 m/min - 6 clamping fingers, 4 double roller tracks - Table length: 3100 mm | Fence depth: 3150 mm - Closed Pertinax surface in the area of the angle fence Control & Operation: - Operating system: Ubuntu Linux - Integrated PC with hard disk, parallel & serial interfaces - Network capable (LAN/WLAN), remote maintenance via internet (TeamViewer, Remote Desktop) - USB printing function - Multilingual dialog programming - 15" flat screen, multifunction keyboard on a swiveling control console - Graphic display of cutting plans and processes Software / Programs: - OPTIMAX: Office optimization, waste calculation, material requirements - OPTIMIN: Direct optimization at the machine PC with parts list entry - Processing via USB, diskette or online (optional) - Manual, automatic & special operation modes (e.g. grooving, veneered parts) Additional Equipment: - Angle fence table HP 5085: 1,720 x 800 mm | Pertinax overlay - Workpiece support table HP 5025: 1,720 x 800 mm | Pertinax overlay - Air cushion system LK 5030 integrated in both tables - Circular saw blade KSB 4005: Ø 305 mm, Z = 60 - Circular saw blade KSB 4006: Ø 200 mm, Z = 60, tapered Reliability in Continuous Operation: This machine is in use worldwide – under extreme conditions. Whether in the dry climate of Africa or in high humidity regions of Southeast Asia (e.g. Thailand): The PA 4136 runs reliably in 3-shift operations – 365 days a year – and stands out for its outstanding stability and durability. Warranty: We are so convinced of the quality and stability of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electronic supply parts and wear parts.) 📞 Contact us for an individual offer or to arrange a viewing appointment. Machine available from stock. Delivery, commissioning, and training available upon request.

Condition: used, SECOND-HAND MULTIPLATENS BENDING PRESS - 7 platens - Platen dim. mm. 800x800 - Opening mm. 1600/1800 - Cylinder diam. 350 mm. Kdodjwry H Ujpfx Ahbju

Condition: good (used), Robust 800 Roll-to-Sheet Slitter Machine in very good condition, ready for production. Slitting and cross-cutting machine, roll-fed. Sheeter Ideal for bookbinding veneer, paper, canvas, eco-leather, PVC, plastics, self-adhesive foil, etc. Easy format setting, computer control. Manual and automatic operation. Technical specifications: Total power: 3.5 kW Working width: 800 mm Maximum roll diameter: 600 mm Maximum roll weight: 250 kg Feeding/cutting length controlled by computer Kdodpfx Ajzv Nk Iehbju Working speed adjustable via inverter Approximate dimensions (L x W x H): 1970 x 1310 x 1400 mm Weight: approx. 1100 kg Includes a sheet outfeed table.

Condition: used, Year of construction: 2004, - Pre-milling unit - Glue application unit (hot melt) - Pressure zone with pressure rollers - Cut-off saw - Edge trimming/radius milling unit (top and bottom) - Corner rounding unit - Radius scraping blade - Glue scraping blade - Polishing units Edge banding machine Manufacturer: Brandt Type: KDF 560 Year of manufacture: 2004 Technical data - Voltage: 400 V / 50 Hz / 3 phases - Connected load: 13.2 kW - Fuse rating: 35 A Equipment - Automatic unit adjustment via the PC control system - Control: Brandt Power Control PC20+ - Suitable for thin and thick edges (ABS, PVC, veneer, and solid wood edges) - Edge thickness: approx. 0.4 to 8 mm Kdedpszux T Aofx Ahbsu - Workpiece height: approx. 8 to 50 mm - Feed speed: 14 m/min Installed units - Pre-milling unit - Glue application unit (hot melt) - Pressure zone with pressure rollers - Cut-off saw - Edge trimming/radius milling unit (top and bottom) - Corner rounding unit - Radius scraping blade - Glue scraping blade - Polishing units Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), BRANDT KDF 440, 1440 edger well-equipped, CNC-controlled units operated from the control panel Pre-milling cutters Plate heating Glue application with a roller Second tank included Pneumatic pre-trimming guillotine Kdedpfxezuztfj Ahbeu Pressure rollers Trimming balls for final cut Liquids Multi-milling unit (up/down) R1-R2 Corner rounding unit R1-R2 Multi-profile edging unit R1-R2 Straight edging unit Liquids Polishing unit Nesting package Max. element height 60 mm Max. veneer thickness in roll 3 mm Feed rate max. 14 m/min with corner rounding 11 m/min Very good condition for a used machine Original mileage 144,000 meters

Condition: used, Year of construction: 2007, Heating plate press Manufacturer: OTT Type: Solid 16-32 Year of manufacture: 2007 Technical data Kdjdpfx Ahezuzxnjbju Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Log yard with restacking unit Complete log handling system from the log receiving area to the transfer to the debarking line. The system performs automatic log handling, singulation, end trimming, metal detection, butt end reduction, debarking, 3D measurement, and sorting of the logs. Key technical data Capacity: approx. 30,000 m³ of logs in a single-shift operation Log diameter: approx. 160–660 mm Kdedpfx Aozvyl Aohbou Log lengths: 4,000–5,250 mm Special lengths up to 6,100 mm Long logs up to approx. 20 m Herzog processor head with 55 kW hydraulic unit End trimming diameter up to approx. 700 mm Integrated metal detection Hobest Primus butt end reducer for log diameters up to 900 mm EWD ER 90 debarker with rotor opening 100–900 mm Rotor drive: 45 kW, frequency-controlled Feed speed during debarking up to 30 m/min Calibrated Microtec 3D log scanner Sorting block conveyor with five hydraulic discharge stations The restacking unit automatically returns, singulates, and realigns the logs for feeding to the debarking line. It consists of, among other things, an approx. 18 m long log handling conveyor, a four-stage inclined conveyor, a 90° curved conveyor, a double-strand block conveyor, a transverse conveyor, and an integrated log turner. The restacking unit can be purchased separately if required.

Condition: used, Year of construction: 1997, Used Machine Year of manufacture: 1997 Condition: Overhauled by a Heesemann factory technician, including a new feed belt Features and Technical Specifications: - 1 automatic belt sander with combination unit - with electronic articulated pressure beam - for sanding soft and hard veneers - calibrating and fine sanding of solid wood - Calibration of workpiece carrier panels - Removal of defective veneers and coatings - Intermediate sanding of PU, hydro, UV, nitro, and polyester coatings Kjdpfx Ahjz A H Eyjbjdu - Sanding of barrier films - With graphical operator terminal - NC-controlled thickness adjustment from 3 to 150 mm - Activation of the calibrating roller via the terminal - With patented CSD articulated pressure beam for compensating workpiece tolerances up to 2 mm - Sanding width: 1,100 mm - Sanding belt length: 2,150 mm - Frequency-controlled sanding belt speed: approx. 2–18 m/sec - Sanding shoe width: 100 mm - Sanding unit drive: 15 kW - Feed speed: 5/10 m/min - Compressed air: 6 bar - Compressed air consumption: 15 NL/min - With belt dust extraction: 490 l/min - Exhaust ports: 1 x 160 mm, 2 x 100 mm - Air requirement for grinding unit: 1,800 m³/h - Required air velocity: 20 m/sec - Total power connection: approx. 17 kW - Dimensions: 1840 x 1670 x 2200 mm - Weight: approx. 2000 kg

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, On-site inspections while the machines are running are possible in Lithuania! Fully automatic edge banding line with the following machines: Kdjdpfx Aez A Tx Tohbeu HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ edge banding machines Workpiece width without edge at a workpiece thickness of 12–22 mm: min. 60 mm (depending on the workpiece length) Workpiece width without edge at a workpiece thickness of 23–60 mm: min. 100 mm (depending on the workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on a roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Clearance-type joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Clearance-type processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Side conveyor belt on the infeed table Electropneumatically controlled cross guard on the infeed table Manually adjustable infeed guard Set of small parts Integrated air cushion table Fixed stop on the left side in the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross transport Controlled cross conveyor in the infeed Outfeed roller track Controlled cross conveyor in the outfeed Electropneumatically controlled stop guard Side transport belt Manually adjustable panel overhang

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, year of last overhaul: 2025, For sale: a used, professional edge banding machine, Hebrock model AKV 3007 DK-F, manufactured in 2016, complete with additional equipment (detailed below). First owner. Overhauled last year (drive belt and rollers replaced, and the glue pot was refurbished). The edge banding machine operated on a single shift, 8 hours a day, from Monday to Friday. The machine is designed for efficient edge banding of furniture components with PVC, ABS, melamine, and veneer edges. This model is valued for its high-quality processing, robust construction, and ability to operate in continuous mode. Very good condition – the machine is in fully operational condition, regularly serviced, and ready for use without any additional investment. VAT invoice 23%. Ready for pickup. The machine is available for viewing by appointment in Borów (83-332). Please contact me by phone for more information, as well as videos and photos of the machine in operation. Main parameters and specifications: - Gluing system: Top-mounted hopper for granules. The machine supports standard (EVA) and polyurethane (PUR) adhesives, as well as zero-joint systems. - Edge dimensions: Edge banding thickness from 0.4 to 3 mm for components with a thickness of 10 to 60 mm. - Power supply: 400 V / 3 Ph / 50 Hz electrical connection. Maximum power consumption is 14 kW. - Units: Equipped with a scraper, trimming cutter, corner rounding cutter, profiling cutter, and polishing unit. - Additional equipment: Pneumatic beam phase adjustment, optional interchangeable glue pot, front notching saw, free feed, front spraying, cleaning spray. Detailed description: A German-made Hebrock narrow strip edge banding machine with a system for applying glue to the edge of the component and edge banding with edges from 0.4 to 3 mm thick for components from 10 to 60 mm thick, as well as pre-milling the board with diamond cutters. The machine is optimally equipped for every type of edge. The machine's equipment is fully utilized thanks to the computer and PLC control, which fully controls the individual units. The patented Hebrock system in the edge trimming units (which involves adjusting the lower and upper cutters from outside the machine – during operation), as well as automatic adjustment between thin and thick edges, eliminates the need to open the rear housing, which results in significant time savings, comfort, precision, and user-friendliness. Technical data: • Edge thickness: 0.4 – 3 mm • Component thickness: 10 – 60 mm • Max edge height: 65 mm • Compressed air requirement: approx. 450 l/min • Feed speed: 7-11 m/min, 0.75 motor Kodpjzizabefx Ahbodu • Glue heating time: 6 min • Total power consumption: max. 14kW • Electrical connection: 400V, 50Hz • Working height: 880 mm • Machine dimensions [mm]: 5850 x 1425 x 1520 • Machine weight: 1600 kg • Exhaust nozzle diameter: ø 140 mm • Required extraction performance: 24 m3/min • Minimum exhaust air velocity in the exhaust nozzle: 20 m/s • Required vacuum in the exhaust nozzle: 1300 Pa

Condition: used, Year of construction: 1995, Rebuilt in 2020 Printing Specifications: Kedpfx Ajzzaz Ushbedu 5 wet-offset printing towers Variable print repeat: 14”–26” Printing width: 475 mm Web width: 485 mm Mechanical speed: 250 m/min 360° register control Manual ink duct 24” printing inserts Plate thickness: 0.30 mm Sticky-back blanket thickness: 0.95 mm 3-cylinder printing configuration Unwinding & Rewinding: • Unwinder for reels up to Ø1270 mm • Unwind shaft • Rewinder for reels up to Ø1270 mm • Rewind shaft Ø70 mm Web Handling: • BST web edge control • BST WebVideo inspection system • 2 turner bars with air blower (after printing units 1 and 2) Drying & Dampening: • GEW UV drying system, 5 lamps (2020) • Power cabinets for UV system • Technotrans dampening cooling system with alcohol dampening Die Cutting & Finishing: • Servo-driven die-cutting unit • Waste rewinder • Punching and perforation station including: o Common paper infeed with pull wheels o Length perforation o Space for two file-hole groups o IMR block with duplex sprocket punching (245–485 mm) o Pile marking device o Length slitting o 24” file-hole punch unit o Common anvil cylinder for two cross-perforation cylinders up to 28” o Variable zig-zag folder (5”–16”) o 2 × 24” cross-perforation cylinders Control & Equipment: • Main drive motor frame • Press control panel • Main electrical cabinet • Plate bender

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Self-loading press for Steton P111 veneer, 3000×1300 Video: photos.app.goo.gl/1piXqdhN9MUjXRyD9 Working length: 3000 mm Working width: 1300 mm Kdodpfjzh Ivmox Ahbeu Automatic material loading Heated platens using oil Diameter of vertical cylinder: 70 mm Diameter of horizontal cylinder: 50 mm Year of manufacture: 2019 Total power: 24.5 kW

Condition: refurbished (used), Year of construction: 1983, machine/vehicle number: 11549, functionality: fully functional, power: 12.8 kW (17.40 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 120 t, table width: 800 mm, table length: 1,600 mm, total length: 2,300 mm, total width: 1,000 mm, year of last overhaul: 2024, Press 1600x800 mm – 120 T Press force: 120 T Kjdsztxlispfx Ahbodu Dimensions: 1600x800 mm Vertical opening (daylight): 1040 mm Machine number 11549 Year of manufacture 1983 Busse electric heating plates (2024) - 12.8 kW electric - Maximum temperature: 180 °C Inspected by DV Hydraulics in 2024

Condition: new, Year of construction: 2026, Engine Electric 30 kW Electric 37 kW Electric 45 kW Cutting dimensions Max. log diameter 105 cm Max. log length 4.5 m (Bed S) 8.4 m (Bed L) Up to 12 m (non-standard) Clearance between rollers 90 cm Max. cutting width (cant) 85 cm Headstock equipment Automatic cutting thickness adjustment device (Setworks) Industrial PLC controller with automatic mode Headstock up/down feed Electric (Servo) Headstock forward/backward feed Electric Saw blade guide arm Electric (joystick controlled) Saw blade cleaning system Automatic oil mist lubrication with pneumatic assistance Saw blade tensioning system Electric hydraulic with pressure accumulator Debarker Optional Chip outlet diameter 150 mm (6") Headstock features Four cameras Board discharge system Additional options Laser Saw blade Kdodpfezqz T Rsx Ahbsu Length 6270 mm Width 50 mm 75 mm (Standard) 100 mm 120 mm Saw blade guide wheels Diameter 800 mm Type Beltless Material Convex cast iron Bed equipment Bed structure Dual-sided headstock guide system Bed features Board conveyor belt Shock-absorbing roller Additional options Saw-following conveyor Log maneuvering kit Industrial hydraulics 1 or more log clamps on two rods 1 or more bidirectional chain turners 2 or more driven leveling rollers 2 or more stops 7.5 kW or 11 kW hydraulic unit

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, overall weight: 5,400 kg, working width: 1,350 mm, grinding height: 160 mm, brushing unit diameter: 250 mm, working height: 920 mm, grinding width: 1,350 mm, height adjustment type: electric, workpiece width (max.): 1,350 mm, workpiece height (max.): 160 mm, Costa Levigatrici BA R5 series machine for texturing wood, veneer, furniture panels, and parquet. The machine has undergone inspection and servicing. The machine features stepless adjustment for each texturing unit. Fixed working height: 920 mm. Operating speed: 3-25 m/min. The machine is equipped with a vacuum system for holding small parts on the table. Equipment: 1. 250 mm steel wire brush, 0.35 mm wire – 18 kW motor 2. 250 mm Tynex/Abralon brush, K46 grit – 18 kW motor 3. 250 mm Tynex/Abralon brush, K60 grit – 11 kW motor 4. 250 mm Tynex/Abralon brush, K80 grit – 11 kW motor Kodpfxoztl R Ee Ahbsdu 5. 250 mm Tynex/Abralon brush, K120 grit – 11 kW motor

Condition: excellent (used), Cutting dimensions 4300x4300 mm label printer 4 air tables table length 2.2 m 7 grippers pneumatically extendable stops for cutting veneered panels Kdsdpfxszuk Ske Ahbeu angle cutting unit main motor power 18 kW scoring saw motor power 2.2 kW cutting height 125 mm saw carriage feed speed 0-150 m/min pusher beam feed speed 0-90 m/min control system: CadMatic 4.0 year of manufacture 2011 operating hours: 5800

Condition: excellent (used), Year of construction: 2018, Complete production line, machinery for window manufacturing Complete window manufacturing system, consisting of: 1. Window processing line Weinig Conturex C 125, year of manufacture 2018, software Klaes 2. Window tooling Oertli Kjdpfjzx Ti Hox Ahbodu 3. Mortise and tenon press WEINIG ProfiJoint 10/6100 LI, year of manufacture 2018 4. Glulam press Patzleiner LHP14 Eurolinie, year of manufacture 2010 5. Veneer press OMC PL105 30/13, year of manufacture 2018 6. Frame press Casolin Euro 3, year of manufacture 2017 7. Profile milling machine Schöberl, year of manufacture 2010 8. Edge profiling machine SCM Kontur, year of manufacture 2003 9. CNC machining center SCM Record 240 NT, year of manufacture 2008, software DDX 10. Oertli tool set 11. Wide belt sanding machine SCM DMC SY TM 1650, year of manufacture 2018 12. Painting system Vidali Finishing, year of manufacture 2019, consisting of: spray booth, spray guns, pumps, overhead conveyors 13. Table saw Felder K 740, year of manufacture 2019 14. Table router Felder F700Z, year of manufacture 2020 15. Table saw Felder K 700, year of manufacture 2020 16. Double miter saw SML Silver P35, year of manufacture 1999 17. Assembly stop table Ruchser, year of manufacture 1995 18. Assembly table Ruchser RU 4 SSP, year of manufacture 1995 19. Glazing table Ruchser RU SW1 90, year of manufacture 1995 20. Workshop cranes Schmalz, 3 units, year of manufacture 2012 21. Cross-bar milling machine Stegherr KSF, year of manufacture 1980 22. Belt sanding machine Kündig Basiq, year of manufacture 2005 23. Belt sanding machine Löwer LZ1, year of manufacture 1995 24. Glue application machine 25. Filling table Barth, year of manufacture 2018 26. Miter saw Omga BR M 4 DX, year of manufacture 2019 27. Table drill Ganner 109, year of manufacture 1988 28. Drill Ganner 370, year of manufacture 1994 29. Dust extraction system Mion & Mosole SSL, year of manufacture 2004 30. Lumber racks 31. Glass bead applicators, 10 units 32. Glass bead applicators, 6 units 33. Glass bead applicators, red, 4 units 34. Glass bead applicators, 4 units 35. Carts, 20 units 36. Mini-mortise milling machine HIRSCH LQP 180, year of manufacture 1992 – Location: Wioska 37. Four-sided planer Weinig Unimat 23, year of manufacture 2004 – Location: Wioska 38. Planer Weinig Uniplan, year of manufacture 2004 – Location: Wioska

Condition: good (used), IML DA 900 Rigid Box Automatic Wrapping Machine This machine is practically new. Year of manufacture: 2016. Application: Wrapping veneer on a box. Made in Italy. This automated machine is designed for forming solid board boxes by wrapping veneer on a solid board box. This is the latest version of the machine, with a PLC controller. Technical specifications: Max size: 430mm x 350mm x 120mm Min size: 60mm x 60mm x 10mm Kjdpfx Aozw Ty Nohbedu Version thickness: 100-175gsm Weight: 900kg Power supply: 230V The set includes two tool palettes for producing standard boxes. The molds are primarily made using 3D printing technology.

Condition: used, functionality: fully functional, working width: 3,000 mm, HOT PRESS MANNI Kdodpfox Rqtisx Ahbou - Platen dimensions 3000x1300 mm - N. 6 cylinders - Boiler with hot water - wooden waste