Veneer splicer

KUPER FW 1150

Condition: excellent (used), Four-side planer Weinig Hydromat 23C Laedpfxjxlcufs Ab Aeh Working width: 230 mm Working height: 160 mm Number of spindles: 7 Spindle arrangement: 1. Bottom 15 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 15 kW 5. Bottom 30 kW (multi-blade saw) 6. Bottom 7.5 kW (hydro support) 7. Top 7.5 kW (hydro support) Spindle speed: 6000 rpm Spindle diameter: 50 mm 4 feed rollers in the worktable Feed speed adjustable via frequency inverter up to 36 m/min Feed drive powered by cardan shaft Pneumatic pressure elements Technical documentation

Condition: excellent (used), Year of construction: 1985, still very nice veneer saw with planing head Lajdpon An A Tsfx Ab Aoh cutting length 3050 mm with rear support and fence

Condition: new, Technical data: Working width: 970 mm Grinding width: 950 mm Working height: 3 - 160 mm 1 steel aggregate 2 combination unit with shoe The shoe is pneumatically pressed Sanding belt dimensions: 970 x 2150 mm Common motor power of 2 grinding aggregates: 11 kW The speed of the feeding belt on the converter: 16-18 m / sec. Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roll diameter: 150 mm Sanding pad width: 50 mm Sanding belt speed: 18 m / s 1 unit Compressed air consumption: 20l / min Standard equipment: Mechanical oscillation of the sanding belt without the use of compressed air. ECO GEAR SYSTEM Lajdpfx Abjg A D Ane Aoh Smooth regulation of the feeding belt on the converter 4-20m / min Automatic star / delta start Steel roller on the first aggregate, rubberized on KOMBI agragata Electronic table height display Automatic reading device for gr. material and table position setting Safety switches Automatic machine switches Main engine brake Rubber pressure rollers 2-roller table at the entrance and exit In stock! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Condition: used, Year of construction: 2009, functionality: fully functional, Machines connected in one line (all three machines are only sold together). 1. Veneer crossfeed splicing machine Fisher+Rueckle FZR-15, year 2009 2. Direct Stacking Device Fisher+Rueckle DAR-22, year 2009 3. Scissor lifting table 1000 kg Ledpfxjt Akcfj Ab Asah TECHNICAL DOCUMENTATION (full on request) Veneer Cross-feed Splicing Machine FURNIMASTER FZR-15 Veneer format length (longitudinal to the fibre) 350 - 1500 mm Veneer format width (transverse to the fibre) 50 - 500 mm Veneer strip thickness 0.3 - 1.5 mm Max machine output 30 cycles/min. (the output rates are related to an average veneer strip width of 100 mm transversely to the fibre) Connected load (basic machine): Power rate 13.5 kW Compressed air pressure 6 bar Power consumption: Electric power 6.2 kWh Compressed air supply 15 NL/min. Dimensions and weight (basic machine): 2940 mm L x 1000 mm W x 1530 mm H. 3200 kg

Year of construction: 1987, condition: ready for operation (used), A Weinig four-sided planer including automation, double cross-cut saw, infeed and extraction system is available. 1) Four-sided planer Weinig Hydromat 22 BL with automatic lubrication, year of manufacture: 1987, working width: 220mm, working height: 140mm, number of heads: 7, head arrangement: bottom/right/left/right/top/bottom/bottom, spindle diameter: 50mm. 2) Kellfass automation unit consisting of double cross-cut saw, length: 5000mm, buffer cross conveyor and pneumatic roller infeed. On-site inspection is possible. Lodpfev T Apcex Ab Asah

Year of construction: 2026, condition: new, This 4-side -pointer was designed mainly for small and medium quantities with manual feeding. The machine has the following performance. As a drive type for the hydraulic pump, the machine is optionally supplied with a 7.5 kW electric motor or with connection for a cardan shaft. Sometimes it can be very simple: the mechanical sharpening machine has been specially designed for fast and practical feeding under manual feeding. It is therefore perfect for producing small and medium quantities of fence elements, wooden posts and palisades. Ideal for flexible landscaping or hastily planned timber construction. It can process any type of milled and peeled wood. Even curved weak wood, or logs with bark are no problem for the sharp knives. Maximum log diameter 270 mm Shortest lenght of log 1,15 m 5 pointing angles adjustable For rounded, peeled and unmachined logs Capacity 150 to 250 poles/houre Cylinder force 2 x 10 to Oilpressure 200 bar Power unit Electro motor 7,5 kW PTO drive Tractor pump Laodpofw A D Nofx Ab Ash

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), animal feed, and more. This is a complete compact system, built on a base frame, consisting of the following components: - Raw material storage hopper (4 m³) with agitator - Hammer mill, 22 kW drive power, for size reduction of raw materials (e.g., wood chips) - Inclined mixer for raw material, including level sensors and fully automatic moisture dosing - Dosing hopper for pelletizing aids (e.g., corn starch) - Dosing screw for optimal material feed to the press (speed-controlled) - Pellet press with 30 kW drive power, featuring a horizontal ring die, discharge chute, temperature monitoring, overload protection, and more - Conveyor belt for pellet discharge, drop height approx. 2.5 m - Drum screen for dedusting and cooling of pellets Ledpfxexlif Ro Ab Asah The entire plant is centrally operated via Siemens PLC with touch display! All parameters are continuously monitored, and the plant will automatically shut down in case of malfunction! The system is designed and prepared for operation with a second press! Price excl. VAT! !!!!! Attention!! We are continuously looking for sales and service partners (worldwide) !!!!!

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Finger Jointing Line GreCon CombiPact Manufacturer: GreCon Model: CombiPact Year of manufacture: 2006 Machine description: For sale: GreCon CombiPact finger jointing line, year 2006, designed for the production of finger-jointed solid wood elements. This machine is a compact and efficient solution for woodworking companies producing structural timber, glued components and solid wood elements for further processing. The GreCon CombiPact is well known for its reliable construction, precise finger profile machining and consistent production quality. Suitable for processing softwood and hardwood, depending on tooling and machine configuration. Technical data: - Input workpiece length: approx. 150 – 1000 mm - Working width: approx. 40 – 205 mm - Working thickness: up to approx. 80 mm - Pressing / output length: approx. 3000 – 6100 mm - Finger joint profile: typically 10/11 mm - Gluing system: automatic glue application system - Final press: included - Material: softwood and hardwood - Machine type: finger jointing line Ljdpfx Aboyu Unwj Aoah - Application: production of finger-jointed timber and solid wood components Features / advantages: - Compact design - High precision finger joint machining - Reliable and proven GreCon technology - Suitable for continuous production - Good solution for joinery, furniture and structural timber production Condition: very good Note: Technical details may vary depending on the exact machine configuration, tooling and installed options.

Condition: excellent (used), HSS saw grinder LOROCH model KRD710 Lajdpfsyg Nxhox Ab Ajh

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Technical data: Wood infeed length: 150–700 mm Wood width: 40–150 mm Wood thickness: 20–50 mm Lasdpfxsy N D A Us Ab Ash Press length: 6100 mm Pressing force: 120 kN / 12 t Milling spindle power: 15 kW Chipper power: 5.5 kW Glue application system: Flankenjet / Glue nozzle Performance: Tenoner – 2 bundles per minute Press – 2 cycles per minute