Used Veneer Guillotine for sale (1,448)

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Ndsdpfx Afswfq T Sefof Discharge of scrap from under the machine directly to the container.

Condition: like new (used), functionality: fully functional, Year of construction: 2019, Baumann guillotine trimmer, including unstacker Baumann BB7L, guillotine trimmer Baumann Wohlenberg 168 and stacker Baumann BA7P Characteristics Guillotine trimmer Wohlenberg 168 * Input max: 1250 x 1650 mm Njdpsub Sbrsfx Affodf * Feed height: 165 mm Characteristics Unstacker Baumann BB7L & Stacker BA7P * Stack height max: 1800 mm * Max weight on table: 300 kg * Dimensions max (unstacker): 1450 x 1650 mm * Dimension max (stacker): 1250 x 1650 mm * Pallet height min: 140mm

Condition: excellent (used), Year of construction: 2009, Josting Veneer Guillotine with Cross-Cutting Machine The machine precisely cuts veneer bundles in a straight and parallel manner. For all types of veneer, tight jointing after cutting is ensured. Technical features: ● Highest cutting quality thanks to an oscillating knife movement, pulling at an angle of approx. 20°. ● Parallel fence with motorized rapid adjustment, fine adjustment, and digital measurement display for cutting parallel widths and strips. ● The green alignment light clearly marks the cutting line. ● Alignment grooves and an angle stop on the machine table facilitate positioning of the veneers. ● The wide pressure beam presses even wavy veneers flat and level before cutting. ● The trim-cut function hydraulically adjusts the knife beam by 0.9 mm. Square cutting edges are achieved by pre- and post-cutting with pressed veneer bundles. ● Cutting veneers across the grain is possible thanks to the powerful crank drive. ● The heavy construction safely absorbs the high pressing and cutting forces. ● Precise and durable parallel guidance of machine components. ● Full utilization of the knife due to 30 mm regrinding capability. ● Low energy consumption and reduced noise levels due to intermittent drive operation. ● Safety features include light curtain interlock, two-hand operation, safety electrical control system, and rear safety guard in accordance with occupational safety regulations. ● The machine can also cut paper, foils, plastics, and other materials. Cutting length: 2800 mm Insertion height: 80 mm Parallel fence range: 20 - 570 mm Pressure beam: 2 pressure stages Knife beam: Brake motor, gearbox crank drive Parallel fence: Three-phase motor, positioning drive Electrical connection: 7.7 KW Footprint (with parallel fence): 414 x 155 cm Height: 170 cm Weight: 3500 kg Nedpfex N A D Rsx Affedf Includes: KUPER QFS 850 cross-veneer guillotine for trimming veneer packs Location: ex-site customer - immediately available - System must be dismantled by the buyer

Condition: used, functionality: fully functional, Year of construction: 1997, Hydraulic Guillotine Shear Ndjdpfjx Npxhex Affef Make: HACO Model: HSLX 4008 Year: 1997 Technical Data Manufacturer: HACO Model: HSLX 4008 Year of manufacture: 1997 Sheet width: 4050 mm Sheet thickness: 8 mm Cutting angle: 0.5 – 3° Dimensions: approx. 4.9 x 2.0 /(plus support arms) x 2.2 m Machine weight: approx. 8 t Features • Automatic cutting angle adjustment • Automatic blade gap adjustment • Cutting line illumination • Support arms • Cutting length limitation • Rear gauge 1000 mm • Angle gauge • Circuit diagram All information without guarantee. A powered demonstration is possible at any time in our showroom.

Condition: used, Used machine Nodpfjx Nkudex Affedf Features and technical data: - Maximum feed-through width: - at 40° cutting angle: 250 mm - at 60° cutting angle: 165 mm - Maximum feed-through height: 180 mm - Cutting angle adjustable: 0 - 60° - Feed rate: 75 m/min - Table height: 650 mm - Table size: 1150 x 650 mm - Blade: 335 x 66 x 8 mm - Motor power: 1.5 kW - Electrical connection: 400 V with chassis Dimensions: 1230 x 860 x 1270 mm Weight: 385 kg Availability: short-term Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2017, Additional Equipment Hydraulic unit with pump, oil tank, and valves for operating the pressure and auxiliary cylinders Hydraulic control unit located at the upper part of the press for maintenance ease Control panel with buttons, selector switches, and a pressure control gauge This CMB PFR-CCL was manufactured in 2017. It features a motorized loading table and an automatic cold press with a maximum pressing force of 160 tons. The press operates with a hydraulic unit and a control panel for precise operation. Ideal for handling large panel sizes up to 5,500 x 1,600 mm. If you are looking to get high quality pressing capabilities consider the CMB PFR-CCL machine we have for sale. Contact us for more information. Application Types Pressing / Laminating Nsdsx Nkm Hjpfx Affsdf

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Durma Hydraulic Guillotine Shear Type VS 3016 Sheet Width: 3,080 mm Sheet Thickness: 16.0 mm Sheet Thickness (Stainless Steel): 12.0 mm Stroke Rate: 7 - 12 strokes/min Cutting Angle: 0.5 - 2.5 ° Backgauge - Adjustable up to max. 1,000 mm Travel Speed: 200 mm/sec Hold-Downs: 14 units Working Height: 840 mm Frame Width: 3,420 mm Throat Depth: 350 mm Control: D-Touch 7 Oil Capacity: 450 l Voltage: 400 V Motor Power: 45.0 kW Weight: 18,150 kg Dimensions (LxWxH): 4,130 x 2,210 x 2,570 mm Equipment: - Heavy-duty electro-hydraulic guillotine shear (guided by rocker arm) - CNC control unit, D-Touch 7 (touchscreen) * Anti-glare, robust 7" color touchscreen control panel * Simple positioning to the desired dimension * Positioning accuracy 0.1 mm * Unlimited material definitions in the material library * Intuitive menu navigation * Separate display for actual and target values * Backgauge retracting function * Cutting length control via adjustable stroke length * Stroke counter * Automatic machine stop upon completion of programmed cuts - CNC electro-motorized adjustable backgauge * Maximum travel: 1,000 mm * Backgauge adjustment via ball screw and linear guides - CNC electro-motorized blade gap adjustment - CNC electro-hydraulic cutting angle adjustment - Heavy-duty welded steel construction - Ergonomically positioned, clearly arranged control panel - Hold-downs positioned close to the cutting edge - Front light barrier (replaces finger guard) - Self-regulating hold-down pressure - Rear safety device (light barrier) - 1x Side gauge .. L = 1,500 mm - 2x Support arms .. each L = 1,000 mm Ndodpox Ngd Iofx Affjf - Wide sheet supports with ball rollers - Mobile footswitch with emergency stop function - High-quality, resharpenable, segmented blades - Rear sheet chute - Original operating manual

Condition: excellent (used), Year of construction: 2009, Trumpf TruShear 5064 Guillotine Shear Manufacturer: Trumpf EHT Model: TruShear 5064 Year of manufacture: 2009 Condition: used, very good Control: ELGO 50 Cutting length: 4,050 mm Cutting capacity: 6 mm Drive power: 15 kW Max. strokes: 201/min Weight: 11,000 kg Customs tariff number: 84615090 Motorized backgauge Sheet support device Nsdpfx Aox Nfybeffsdf Sheet return system Front support arms Front scrap container All documentation available Manuals included

Condition: excellent (used), Year of construction: 2016, Ref: 11047 . 2016 EBA 721-06 LT Guillotine 72cm Automatic guillotine. Equipped with: Electro-mechanical blade drive Hydraulic clamp drive Infinitely adjustable clamping pressure (250-2000 kgs) with optical indicators Snap-in false clamp plate with optical indicator Spindle guided electro-mechanical back gauge drive for precise positioning Air table on front and rear table Foot pedal for pre-clamping or cutting line indicator Optical cutting line indicator with LEDS Durable stainless steel working surface on front table HSS steel knives Swing cut for more cutting precision Adjustable solid steel blade carrier guided on both sides Adjustable blade depth Stainless steel side tables (left and right) Electronically guarded front table area by photocell safety guard Transparent safety cover on rear table Two-hand safety activation with repetition blocking and control for synchronous operation Automatic return of blade and clamp from every position Main switch, safety lock and key Blade changing device with covered cutting edge Knocking-up device Features: 99 programs with up to 99 steps each Up to 9 repeat measurements can be integrated in one program step Program runs automatically – with electronic cutting monitor 10-button-keyboard for pre-setting of measurement 3 memory buttons available for individual measurement setting Electronic digital display with an accuracy of 1/10 mm ‘Set Function’ key for reference measurement Electronic hand wheel with infinitely variable speed for Fine adjustment of back gauge Push buttons for fast back gauge movement (forward and reverse) Automatic measuring correction in case of back gauge displacement Memory key for repeat cuts (manual) and additional automatic memory Paper eject function with and without program mode (advancing programmable) Delete and insert mode for correcting and modifying programs Integrated calculator Ndjdpfx Afsx Nfr Rsfof Self-diagnostic system with error indication on display Metric and imperial changeover Specification: Cutting width: 720mm Cutting height: 80mm – 781mm Insertion depth: 720mm Front table depth: 530mm Minimum cut: 20mm – 901mm Back gauge speed: 53 mm/s Dimensions W x D x H in mm 1305/21002 x 1500/16002 x 1335

Condition: excellent (used), Year of construction: 1998, I sell Polymac Rubber edgebander little used, like new. Nodpfsuvdzujx Affjdf

Condition: used, Year of construction: 1985, Cutting length: 3100 mm Cutting height: Adjustable from 0-45 mm Saw unit: Powerful three-phase motor 220/380 volts, 1.8 kW power Clamping bar at the top with a handwheel Storage location: Nattheim Njdpfxsvvkaze Affjdf

Condition: used, The equipment in question is a display air table program manufactured by Ceelen. This specific model, identified as Type C780-M8, has a serial number of 003309 and a size of 780 mm. Currently, the status of this item is ZollIn Printshop, Zoll and it is located in Germany. The price for this equipment is available upon request. Format: 780 mm Ndodpfx Aowut Droffjf Equipment: display Air table program

Condition: used, BLADE LENGTH: 2600 mm with tamper Ndjdpfxex I Nllj Affef

Condition: good (used), Code: 0062 Brand: KUPER Model: FW / J 900 Ndodjx I Dwpepfx Affsf Thread splicer for veneer Technical Data Reach mmm 920 Feed 15 mt/min Motor power Kw 0,18 Electrical connection v. 380/50 Total installed power Kw 0,45 Heating 200 watt Compressed air 6 bar Overall dimensions mm 1350 x 580 x 1600 h Weight kg 185

Condition: excellent (used), Year of construction: 2017, Ref:11049 . 2017 Ideal 5221-95 EP Guillotine. 52cm programable guillotine Equipped with: Electro-mechanical blade and clamp drive Power ‘EP’ back gauge Control module Electronic hand wheel for manual back gauge positioning Infinitely variable speed control (from very slow to very fast) Optical cutting line Adjustable back gauge with narrow separations and plastic gliders Two side lays each on front and rear tables High-quality blade made from “Solingen steel” Solid steel blade carrier and adjustable blade guides Automatic clamping system, guided on both sides for evenly distributed clamping pressure Clamp can be lowered or raised independently from blade Machine and stand can be separated for transportation through narrow doors (70 cm) Side tables (left and right) SCS (Safety Cutting System): hinged, electronically controlled safety guard on the front table Transparent safety cover on the rear table Main switch and safety lock with key Electronically controlled true two-hand operation 24V controls (low voltage) Disk brake for instant blade stop Blade changing device with covered cutting edge Blade depth adjustment from the outside of the machine Easy blade change from the front of the machine without removing covers. Ndodpfsx Nfr Dox Affjf Digital display for measurement readout in cm or inches (display accurate to 1/10 mm or 1/100 inch) 10-button keypad for presetting of measurement Memory key for repeat cuts | 9 programs with 9 steps in each program (up to 9 repeat cuts can be integrated into a program as one single program step) Setting of program steps via “Start” button ‘SET’ function key for reference measurement Programmable eject function – for pushing out the paper Two programmable keys for quick setting of frequently needed measurements Self-diagnosis system with error indication on display Specification: Cutting length: 520 mm Cutting height: 80 mm Narrow cut: 35 mm Table depth: 520 mm Power supply: 230 V / 50 Hz

Condition: used, Veneer Press OTT JU 90 -used- Ndsdpfx Ajwmmrasffjf ----- Technical Specifications ----- Pressing area: 2,550 x 1,350 mm, Power per heating plate: 9100 W, Number of cylinders: 4

Condition: used, Throat depth: 420 mmConstant feed rate: approx. 6 m/minDrive electric motor: 25 W, 190 V=Supply voltage: 110 - 235 V, 50 - 60 HzTotal connected load: 110 WHeating head: approx. 75 WNet weight: approx. 22 kg with foot pedalStorage location: Nattheim Njdpfx Ajvvi Udjffsdf

Condition: ready for operation (used), sheet thickness steel (max.): 20 mm, back gauge: 1,000 mm, power: 33 kW (44.87 HP), empty load weight: 20,000 kg, workpiece length (max.): 3,100 mm, throat depth: 150 mm, fully automatic shear, heavy duty shear for cutting high alloy steel, stainless steel with no torsion touchscreen CNC control: - cnc controlled backgauge - cnc controlled blade gap - cnc controlled cutting angle foldable backgauge TOP Belgian quality shear Strokes/min: 9 > 30 str/min Adjustable cutting device: 0,05 > 1,3 Adjustable cuttingedge: 0,2 > 2,5° Number of sheet holders: 16x Ndsdpfex Imnkjx Affsf

Condition: good (used), Code: 0124 Brand: ORMAMACCHINE Model: P30/3 Hydraulic cold press for furniture, kitchens, wooden doors, custom-made furniture, composite materials, aluminium, plastics and various materials Technical data: Platen size mm 3000 x 1200 N° 3 hydraulic pistons Opening mm 500 Total thrust ton 15 Motor Hp 1,5 Nedpex I Az Tefx Affsdf Overall dimensions mm 3300 x 1300 x 2100 h Weight kg 1100

Condition: used, Material clamping via handwheel. Cutting length 3000 mm. Max. cutting height 60 mm. Nedpfsvvkblex Affodf Storage location: Nattheim

Condition: ready for operation (used), sheet thickness steel (max.): 13 mm, back gauge: 1,000 mm, power: 17 kW (23.11 HP), total length: 4,400 mm, total width: 2,200 mm, total height: 2,205 mm, empty load weight: 10,500 kg, workpiece length (max.): 3,100 mm, cnc backgauge cnc cutting angle Njdpfjx Immgox Affedf cnc knife play CNC ELGO Strokes/min: 11 > 40 str/min Adjustable cuttingedge: 0,5° > 2,5°

Condition: good (used), Code: 0276 Njdpfx Aex Iu Husffsdf Brand: ORMAMACCHINE Model: NPC - CE Standard Hot press for carpentry, furniture, custom-made furnishings, veneering, panels, doors, wooden window frames, composite materials and various - CE Standard Technical data: Working platens dimensions 3000 x 1300 mm Opening between platens 400 mm N° 6 pistons Total thrust 90 ton Platens with coils Platens heating with hot water via boiler complete with circulation pump and expansion tank Motor 2 Hp Overall dimensions mm 4600 x 1600 x 2000 h Weight 3800 kg

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Joining material: glue thread with hot air heating Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Machine type: floor model Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Nsdpswmb A Tjfx Affjdf Storage location: Nattheim

Condition: good (used), Code: 0487 Brand: KUPER Model: 630 Thread splicer for veneer with base Technical data: Throat depth mm 630 Thickness of veneers 0,4 - 2 mm Feed speed 7 mt/min Volt 220 single-phase Nsdpfx Aextat Uoffjdf Overall dimensions : mm 950 x 500 x 1180 h Weight kg 95

Condition: good (used), Code: 0270 Brand: EMME ELLE Model: G.L.C. 1200 - CE Standard Longitudinal glue jointing machine for veneer - CE Standard The longitudinal jointing machine allows a perfect jointing of two veneer sheets in one operation by using a patentedsystem for the glue application. The machine is equipped with two tanks for the mass glue application. This innovation grants high quality and high jointing finishing since the glue is simultaneously applied on both edges to be jointed. The advantages of this type of glue processing are the following: 1_higher working speed (the machine can reach a speed of 35/40 mt/min with some wood types.) 2_In case, for any reason, no glue is applied on one of the two edges, the jointing is anyway granted since the glue is applied on the other edge as well. 3_A high resistant jointing is granted by applying the glue on both edges, since the two sheets are jointed with glue to glue and not with glue to wood. Technical characteristics Veneer sheet dimensions Thickness mm 0.4-2 Min. Length mm 360 Min. Width mm 45 Max. Width mm 1200 Technical Characteristics Heating area length mm 1200 Heating temperature up to 240° Ndedpfx Asx Ihgneffsf Transport speed 10-40 m/min Glue type UREA Power connection 6 Kw Voltage 400 V / 50 Hz Machine dimensions Length mm 2600 Width mm 2000 Height mm 800 Weight Kg. 2000