Used Varnish for sale (102)

Condition: used, Year of construction: 2019, functionality: fully functional, resolution (max.): 360 dpi, paper width (min.): 290 mm, paper width (max.): 750 mm, paper height (min.): 360 mm, paper height (max.): 1,200 mm, Digital screen printing machine with hot foiling unit. Year of installation: 2019. Minimum print format: 29x42 cm, maximum: 75x120 cm. In excellent condition. Kjdoxrz T Tjpfx Affjfa

Condition: ready for operation (used), Refurbished - 2008 UV - full or spot Kjdpfx Afjxhfwujfjfa TG Color system

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, compressed air connection: 8.5 bar, SCODIX ULTRA PRO. 2016 Nr. 3061 Only 2.2 mil Scodix Foil Scodix Cast&Cure Bar code reader Kjdpfx Afswvi H Ejfsfa Scodix Technology Digital Print Enhancement with inline foil Roll Width (Min-Max) 50-500 mm, Number of Simultaneous Rolls Up to 4-rolls Hologram foil. Substrates: Offset, plastics, laminated, coated Substrate Format545 x 788 mm Substrate Range 135-675 gsm, up to 0.7 mm Compatibility: Speed (Max) 1,250 SPH

Condition: good (used), Heidelberg SBGZ for UV coating with dryer Max size: 56 x 77 cm Machine has roller for UV varnish Can make spot varnish and full varnish Kedopwkgxopfx Affjfa EMA UV Eko dryer Very good condition

Condition: used, Year of construction: 2013, Varnish Coater is designed for most roll-to-roll solvent, eco-solvent and UV inkjet prints to laminate, which can supply smooth and consistent liquid coating thickness. The Varnish Coating can protect inkjet graphics on Vinyl, Banner, Canvas, Wall Paper, Truck tarpaulin against Scratches, Abrasion, UV rays, Water and Chemical. The easy access design to allow one people to operate to save labor cost and time. Features: a. Standard Interchangeable Mayer bar - 0.5mm and 0.8mm b. Fixed position for Mayer bar c. Coating bar and heating bank up and down controlled by Air compressor d. Infrared heating and fans cooling curing system e. Easy to Clean by Water f. Varnish empty alarm system g. Varnish Pumping up and Recycling return system h. 3" Interchangeable Auto-grip shaft for unwind and rewind i. Variable speed control with forward and reverse j. E-stop and circuit breaker for safety use k. CE certified Max. Coating Width 3200mm Variable Working Speed 0.5-1.5m/min Max. Coating Thickness 32microns Recommended Working Temp. 100-120℃ Alarm Temp. 150℃ Kfjdpfowpu D Njx Affsa Drive Motor AC110V 230V 120W Power Consumption 13Kw Power Requirement 380V/3P 50/60Hz 25A 220V/3P 50/60Hz 60A Machine Size 3380*1020*1050mm Shipping Dimensions 3450*1100*1230mm Weight ( NW / GW) 700kg / 960kg Optional Mayer Bar 0.3mm / 1.0mm

Condition: good (used), Digital offset printer for finishing. With UV spot coating in defined areas for a 3D visual effect. Pictures and further information available on request. Kjdpox Dcvaefx Affefa

Year of construction: 2014, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: JV3D5274-099, For sale is a digital finishing system with hot stamping foil module in very good condition including spare parts dispenser. It has been completely overhauled and is ready for use. Technical data: Make: Mgi Jetvarnish JV3D5274 incl. IFoil module (from Körapackmat) Year of manufacture: iFoil 2014 SN: 3649 / Jetvarnsih 2014 SN: JV3D5274-099 Digital single pass inkjet printing with UV varnish using 8 piezo print heads from Konica Minolta type IHM 1024i (2 x 512 nozzles per head) Mechanical sheet transport with automatic sheet feed on the middle/left or right with ultrasonic double sheet detection. Feeder and stacker with a capacity of 4000 sheets at 135gr/m² (sheet stack up to 60cm high) Pixel-accurate sheet detection with laser keyence sensors for varnish form positioning Dual camera system for print mark detection for print data alignment Kfsdpfsqfddbox Affsa Flat sheet guide with conveyor belt over a vacuum table that can be adjusted to the sheet width using blinds Air-cooled LED pre-drying directly behind the print head bar Infrared unit for surface varnish application Air-cooled high power UV drying from market leader IST-Metz Connected foiling unit for hot foil embossing including sleeking option. Heating roller newly installed Dec 2019 (ran approx. 2 km since then) Intuitive production software with an editor for pixel-accurate editing of the varnish layer.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Double-sided component painting line fully automatic Working width of the line 1300 mm The line consists of the following devices: - Vacuum feeder - automatic feeder before painting - GIARDINA Dualtech 416 automatic paint machine Kjdpfx Ajtut Dxjffefa - 2 x 12m hot air drying tunnel - UV dryer - 3 lamps - material turntable - automatic painting machine RICHFRUITS - 2 x 12m hot air drying tunnel - UV dryer - 3 lamps - Vacuum feeder Machine in working order, connected in very good condition.

Year of construction: 1985, condition: good (used), COMPLETE COATING LINE WITH THE FOLLOWING POSITIONS: Kfodpek Scufofx Affsa 1 HYDROPRIMER SPREADER 2 OVEN WITH UV LAMPS + IR 3 DOUBLE COATER WITH REVERCE 4 UV LAMPS 5 DOUBLE COATER 6 UV LAMPS 7 DMC SANDER 8 CONVEYOR 9 COATING MACHINE TOUCH-UP DYE SORBINI 10 IR LAMPS 11 FINISHING ROLLER 12 UV LAMPS 13 EXIT CONVEYOR

Year of construction: 2013, condition: excellent (used), PRINTING EQUIPMENT FOR SALE; EDALE DIGICON 30000 OFF LINE ROLL TO ROLL FINISHING LINE Kodpfoiic Najx Affofa NEW 2013 NEW CONDITION Includes: • DIGICON PRINT UNIT • INK JET PRINT UNIT • EDALE 20000 CURING SYSTEM CYLINDERS • ANILOX ROLLS • HARPER PRINT CYLINDERS • DRYERS • PLATE MOUNTER • ANILOX ROLL CLEANER • EDALE DIGICON 30000 PRESS IS 9 YEARS OLD, IT’S IN NEW CONDITION WITH VERY LIMITED USAGE. BASED ON OWNER RECORDS THE COATER WAS PURCHASED FOR APPROX. $975,000 INX XAAR INKJET PRINT HEADS AND SOFTWARE PURCHASED NEW FOR INSTALLATION ON THIS EQUIPMENT . THE INX XAAR PRINT HEADS ARE FOR HIGH VOLUME UV INKS, USED FOR RAISED/TACTILE VARNISH PRINT EFFECTS. THEY COULD NOT BE USED FOR CMYK FINE PRINT QUALITY. THOSE WERE PURCHASED AT A PRICE OF $240,000. THE XAAR HEADS AND SOFTWARE ARE STILL HERE IN A BOX (NEVER OPENED) AND ARE AVAILABLE FOR SALE. THERE ARE THREE DIFFERENT DRYING SYSTEMS ON THE COATER • GEW MERCURY CURING • GEW WATER BASED IR DRYER • PHOSEON LED CURING OTHER ITEMS INCLUDED: • THERE ARE 8 HARPER PRINT CYLINDERS (REPEAT BUILDER PLATE SLEEVES): • THERE ARE 16 EDALE ANILOX SLEEVES ACQUIRED AT A TOTAL PRICE OF $45,000 (EXCELLENT SELECTION OF ANILOX ROLLERS) • THERE IS A PLATE MOUNTER, IT WAS PURCHASED AROUND $22,000 • THERE IS ALSO A FLEXOWASH ANILOX CLEANER, PURCHASED AT $30,000

Year of construction: 2005, condition: refurbished (used), ABG Digicon Serie I HS Anno 2005 - Sbobinatore; - Guida web; - Stazione semi rotativa di stampa flessografica (possibilit‡ di stampare con riserva) - Essiccatore ad aria calda - Essiccazione UV; - Laminazione con unità di riavvolgimento; - Fustellatura Semi rotativa; - Riavvolgimento Sfrido - Taglio longitudinale sotto e sopra; - Ribobinatore a 2 mandrini - 3 pcs anilox - 3 pcs Cilindri Stampa per applicazione vernice - Cilindri per impianto flexo per stampa a registro e/o verniciatura con riserva ABG Digicon Serie I HS Year 2005 Basic with: - unwind; - web guide; - semi rotary flexographic printing station with hot air dryer or UV curing system; - overlaminating with rewind unit; - semi rotary die cutting; - waste matrix stripping; - scissor slitting and back scorrer Kfjdehmpm Tepfx Affea - two rewinder; - electronic dispro; - 3 pcs anilox - 3 pcs printcylinder for varnish

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, working width: 520 mm, Autobond Micro 52 TH-SUV - Maximum sheet size 52 x 74 cm. - Maximum speed 35 meters per minute, equalling up to 3,200 sph of SRA2 portrait & up to 2,800 sph of B2 portrait Feeder - Heidelberg Speedmaster stream feeder - The Autobond bump sheeter is integrated with the laminator and runs in-line Inkjet spot UV - The spot UV machine has a row of 7 inkjet print-heads. - Maximum spot UV speed is 30 m/min at 360 dpi 1 to 3 dpd - Minimum varnish thickness (1 pass): 5 micron. Kfodpoqxrwysfx Affsa - Maximum varnish thickness (1 pass): 28 micron

Condition: used, Year of construction: 2015, functionality: fully functional, Manufacturer, Modell: Xeikon 3500 + GM Converting System Scope of delivery: Xeikon Press + GM Inline Finishing System Status: Xeikon Service Date of Installation: June 2016 Year of Manufacture: 2015 Counter: ca. 5,6 Mio running meter Kfsdjvitwpspfx Affja Operation hours: ca. 5070 h Print Technology: Dry toner electrophotography Imaging Head: High-Precision LED Matrix Printing Engines: One-Pass, 5 (CMYK+White/Spot) Media Input: Web-fed Media Output: Rewinder Imaging Quality: 1200 x 3600 dpi, variable dot density Media Width: 250-516 mm Toner: QA-I dry toner Printing Speed: Up to 594 sqm/h Media Weight: 40-350 g/m?, 550 ?m Substrates: coated/uncoated Papier, PE, PP, PET, Vinyl, Coex-Folie Digital Front End: Xeikon X-800 Xeikon 3500 | Digital Label B2 Press, Year of manufacture 2015, First Installation June 2016, Print Counter: around 5,6 Mio. meters (status May 2024), Operating hours: around 5.070 hours (status May 2024), Digital Front End: Xeikon X-800 with control PC and 2 monitors, Xeikon Software My Press Version 6.63.x, Machine is expected to be dismantled in week 24, Machine is still in service contract GM DC 500 | Converting System, the DC500 can be set up as an in-line extension to a digital label printing system, allowing the web to continue directly into the converter from the digital press, Year of manufacture 2016, First Installation June 2016, Web Width 100 mm ? 500 mm, Substrates 50-200 gsm, Buffer for manual change of rools in production, Full or Spot Varnish possible, Semi-rotative Die-Cutting Station, Semi-Rotary Speed 40 m/min, Die Plate Size (repeat) 50-558,8 mm, Slitting | 1x Dish Knife and 15x Razorblades, 2 Rewinders with 75 mm diameter, Waste Matrix Rewinder, 4 Anilox Roller, 4 Print Cylinder for varnish, Machine is expected to be dismantled in week 24, Machine was in service contract, Pictures and datasheet attached Through many years of serious and professional development, JORG Graphische Produkte GmbH has established itself as one of the world's leading providers of certified pre-owned digital printing and finishing systems. Since we have started the Digital Press business in 2009 we have sold more than 190 High-End Digital Printing Systems for commercial, packaging and label printing worldwide. Meanwhile, the scope of services of JORG includes qualified advice according to customer specifications, Machine Sales, On-Schedule Delivery Service, On-Site Installation with Operator Training as well as After-Sales Service and Support. The machines of the brands such as Xeikon, HP Indigo, Epson etc. are currently located in the following countries: Austria, Belgium, Botswana, Brasil, Bulgaria, China, Chile, Croatia, Cyprus, Denmark, France, Germany, Ivory Coast, Guinea, Hong Kong, Hungary, India, Israel, Iran, Italy, Jordan, Kenya, Kyrgyzstan, Latvia, Madagascar, Mali, Malta, Mauritius, Macedonia, Morroco, Netherlands, Nepal, Panama, Romania, Russia, San Marino, Switzerland, Sweden, Serbia, Slovakia, Slovenia, Syria, South Africa, Tahiti, Taiwan, Turkey, UK, Uruguay, USA, Wales

Condition: used, 2 belt cross sander Heesemann MFA 8 for intermediate sanding of varnish and sanding of wood panels and other workpieces. working width: 1300 mm Clearance height: max. approx. 140 mm clearance height: max. approx. 140 mm Aggregate 1: cross-section Unit 1: Electronic print bar Aggregate 2: longitudinal grinding Unit 2: Cross-section Unit 3: longitudinal grind Kfjdpfx Afsxr N I Eofoa Unit 4: cleaning brush

Condition: used, mileage: 117,898 km, Year of construction: 1978, Serial number: 100xxxx Please contact ATS Norway for more information Kfedpfx Afjxgcrgsfja Please provide reference number upon request: 21424 Specifications: 1978 model 117,898 km Rep. Object 205 hp 6x2 Manual transmission Tires (see pictures) Rust of the rear housing (see pictures) Frame sand blue and varnished a few years ago Battery needs to be replaced. Tipping box Foldable aluminum limbs Internal length in plan: 6,115 m Internal width in plan: 2,475 m Light Heater Ready for delivery   Crane specifications: 1979 model 10 t/m crane 2 Hydraulic outriggers 2 Hydraulic extensions 1 Hydraulic extension on main boom 1 Manual Manually controlled Ready for delivery   Description: We have a 1978 Scania LB 81 6x2 Crane truck w/ 10t/m crane and tipper ekt for sale. The car is being sold as a repair item as it is no longer EU approved and there are errors and defects. There is a bad battery on the car, these should be replaced. Starter is starting to get bad. Errors and deficiencies exist and some cost must be taken into account to get it back in good condition. Ready for delivery Km: 117898 HK: 205 Technical approved: no EU-approved until: 28.02.2019 Own weight: 10100 Model: LB 81 6x2 Kranbil m/ 10t/m kran og tipp ekt Gearbox: Manual

Condition: new, AUTOMATED PAINT SHOPS Kfodpfx Asdy Ez Ieffsa These are the paint shops where your product is designed and manufactured by our engineers in line with your capacity, use area and other demands. Maximum efficiency is aimed to be provided with minimum staff and the least space usage at electrostatic powder coating or wet paint, sandblasting, varnishing, glazing, coating, washing and similar system requirements.

Condition: good (used), Year of construction: 2018, Xeikon CX500 Digital Label Press – (Roll-to-roll digital dry-toner press) Year of Manufacture: 2018 Print Media Handling • Roll-to-roll configuration with variable repeat length • Print width: 508 mm • Print speed: 20 m/min (65.6 ft/min), depending on substrate grammage • Media weight: 40 – 350 gsm (27 lb text to 130 lb cover) Print Engine • 5-color dry toner technology • Resolution: 1200 dpi • Color configuration: o CMYK o Single-pass opaque white o Gamut extension o Custom spot colors _____ GM DC5V8-BX Converting & Finishing System Year of Manufacture: 2011 Web Specifications • Web width: 200 – 520 mm • Substrate thickness: 20 – 200 microns • Machine speed (semi-rotary): up to 55 m/min Main Units & Features • Unwind unit (max. diameter: 700 mm) • BST web guide with splice table • Servo-controlled flexo printing unit • UV curing unit • Laminating unit • Vetaphone corona treater • Die-cutting unit o Plate size: 50.8 mm – 520.7 mm o Magnetic cylinder: Z200 • Waste rewinder (diameter: 500 mm) • Slitting unit • Two rewind stations • Pre-installed buffer system for Xeikon digital press • Touch-screen operator control panel _____ SYSTEM BENEFITS When combined, the Xeikon digital press and GM DC5V8-BX finishing line form a complete end-to-end label production workflow, enabling: • High-quality digital printing • Inline or nearline converting • Flexo varnish, lamination, die-cutting, slitting, rewinding • Fast job changeovers • Efficient production of short, medium, and long runs Ideal for label converters seeking a compact, flexible, and fully integrated solution. _____ CONDITION OF THE MACHINES Ksdpox Hh A Hsfx Affsfa • Both machines are in good used condition • Fully operational prior to decommissioning • Offered as part of a combined setup for optimal productivity _____

Year of construction: 2007, operating hours: 4,000 h, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: D6588, Screening machine, capacity 20 [t/h]. Double unbalance motor 3.0 [kW] 975 [rpm] 400 [V] 50 [Hz] 330 [kg] Drawing No. 1055.02M.SC156 Refurbished used unit General inspection of all welds. Disassembly of double unbalance motors. Oven drying and new tropical protection. Replacement of bearings and seals. Inspection of wire cloth tensioning systems, as this is a critical technical point. Sandblasting Anticorrosion paint, 1 coat Varnish in the RAL colour of your choice, double coat Supply of 08 new springs The NOFEM 1215 vibrating feeder, refurbished used unit Supply of new and bolted Hardox 500 wear liner Disassembly of double unbalance motors. Oven drying and new tropical protection. Replacement of bearings and seals. Sandblasting Anticorrosion paint, 1 coat Varnish in the RAL colour of your choice, double coat Supply of 04 new springs The shared steel frame for both units, new Kjdpfswzliaex Affofa Welded, heavy-duty assembly designed to withstand the high acceleration forces of an energy-intensive sizer. Sandblasted steel structure. Anticorrosion paint, 1 coat Varnish in the RAL colour of your choice, double coat Optional Walkways and stairs to be defined according to your project requirements Galvanization

Condition: good (used), Code: 0281 Brand: AGLA GALLI Model: 2 R 130 Automatic 2 roll polishing machine for polyester and varnish - It is suitable for buffing of high gloss polyester or polyurethane paints, metals, marble and similar materials N° 2 inclined rollers - Thanks to this inclination, the rotating brushes, by oscillating, ensure a perfect polishing of the surfaces to be treated REVERSE" system , which restrains softens the reverses even with heavy materials like marble, wooden panels, etc. Length of 2 rollers mm 1300 Roller diameter mm 300 Useful working length mm 4300 Useful working width mm 1300 Max panel height mm 120 Motor hp 15 x 2 Kfedpfjx Db Nfox Affoa Working table height from mm 950 to mm 1180 Suction mouth diameter mm 200 Overall dimensions mm 5000 x 2350 x 1750 h Weight kg 2500

Condition: used, power: 4 kW (5.44 HP), color: grey, Year of construction: 2002, Field of application: Mining Volume of the tank: 0.22 m^3 Manufacturer : Comec Model: Micronet-25-COSM Year : 2002 Type : DISPERSION & MILLING MACHINE   Useful volume : 3 - 22 L Motor power : 4 kW Material : stainless steel Electrical cabinet with variable speed drive. Work cycle timer for automatic stop. Double jacket Top loading of liquids Dispersion by deflocculating turbine + sand milling Continuous recirculation between the upper dispersion basket and the lower grinding chamber until the desired fineness is achieved. Kodpjx Ai Uasfx Affjfa Cosmetic applications: Particularly suitable for the stable dispersion of oils in water, the addition of pigments and glues, and the mixing of colourants in products such as nail varnishes.

Condition: new, functionality: fully functional, machine/vehicle number: V1 01HUNG60KET9ESGRBMSZ601W, Year of construction: 2023, ! short delivery time, under 10 weeks ! !! We are happy to advise you !! Model name: Rotection Box-Motion U Production orientation ////: Horizontal Conveyor system ////: Chain conveyor belt, length as desired Film feed ////: from below Form shoulder ////: flexible and fixed Operator display ////: 10" touchscreen with memory functions, swiveling through extension arm for comfortable operator handling Drives & control ////: 9 servo motors and PLC control Packaging length ////: 200-600 mm Packaging width ////: max. 250 mm (depending on film width) Packaging height ////: max. 120 mm (depending on forming shoulder) Speed ////: 10-60 bags/min. Film width ////: max. 600 mm Consumption ////: approx. 9 KW Power supply ////: 220-240 V / 50 Hz/ 1-phase System weight ////: approx. 1500 kg Kfodpfxjq Ikgyj Affea System dimensions ////: approx. 3560 x 1320 x 1500 mm System material ////: 304 stainless steel Print mark sensor ////: Yes External compressed air required ////: Yes Printer holder ////: for an additional charge Delivery time ////: Current delivery time under 10 weeks Features: • Box motion end seal • Steel frame / stainless steel construction • Splice function, dependent on material and speed • Fixing of the unwinder by hand without compressed air • Automatic roll centering for precise application • Automatic stopping for empty products (no product - no bag) • Simple touchscreen operation using color symbols • Continuous feeding of products through sensor control • Print mark sensor included • Safety protective covers • 3-sided weld seam packaging (fin seam) • Longitudinal welding on the underside of the bag • rotating cross-welding system • can be combined with upstream and downstream machines • customer-specific changes / designs on request Additional options (on request and for an additional charge): • thermal transfer printer e.g. best-before date, print width up to 60mm • stainless steel finish / varnishing • cooling applications for ice cream packaging • zig-zag knife, euro hole stamp etc. • applications for shrink films (flow shrink) • gassing units for protective atmosphere (extend product shelf life) • automatic product feed systems, cyclical insertion systems • perforation units (tear thread) for easy opening • length-dependent product processing through photocell query

Condition: new, Step By Step Wet Painting Systems Elboy Industrial Solutions designs and manufactures full range of paint shops for your product. With ELBOY, you can navigate through your facility with virtual reality in the design phase, enabling you to make the desired changes in the design phase and not to encounter the surprise results. It provides designing and manufacturing services for your application by paying special attention to environmental pollution and work safety issues for the processes of Sandblasting, Putty, Washing, Undercoat and Finishing Coat for all sizes of products. Step by Step are systems with overhead conveyor or floor conveyors which can be designed for all sizes of product. Kfjdpfx Asdy Dw Aoffsa Booths of Sandblasting, Chemical Washing, Pre-coat, Drying, Putty , Top Coat and Baking can be integrated into the system. In order to respectively carry out the processes determined by the system step by step, the automatic doors are opened at the end of the time period and the product automatically proceeds to the next process line. These fully automated systems are controlled via a 15” touch screen and provide various reporting methods such as main computer monitoring, product reporting and score reporting upon the demand and provide remote control. These are the paint shops where your product is designed and manufactured by our engineers in line with your capacity, use area and other demands. Maximum efficiency is aimed to be provided with minimum staff and the least space usage at electrostatic powder coating or wet paint, sandblasting, varnishing, coating, washing and similar system requirements.

Condition: good (used), Year of construction: 2007, Gallus EM 510 • Year of manufacture: 2007 • Maximum printing width: 510 mm • Printing units: 3 dual-driven print stations • Application: Self-adhesive label production _____ Printing Equipment Kfsdsx Hacrspfx Affoa • 3 flexographic printing units with dual-drive technology • Plate cylinders (1/8"): 3 × 88, 3 × 92, 3 × 96, 3 × 100, 3 × 108, 3 × 116, 3 × 120, 3 × 140 • Magnetic cylinders (1/8"): 2 × 96, 3 × 100, 3 × 108, 3 × 116, 3 × 120, 4 × 140, 3 × 176, 3 × 184, 2 × 192, 1 × 222 • 13 anilox rollers (various volumes: 4.1; 5.04; 6; 6; 6.3; 6.09; 8; 8.25; 9.58; 13; 13.51; 16.57; 30) • 2 brand new anilox rollers • 3 sleeve systems z=88 for varnishing (including mounting station) • Screen printing unit _____ Die-Cutting & Converting • 3 die-cutting stations • 2 stations equipped with adjustable counter-pressure cylinders (Spilker Variabase) • Laminating station • Waste matrix removal on rail system: o 2 matrix rewinders (upper/lower) • Double-spindle rewinder (roll-to-roll) • Insetter system for pre-printed webs • Register control for 5 stations (3 printing + 2 die-cutting, Sensotec) _____ Drying & Treatment • 3 × Uviterno UV curing systems (240 W/cm) • 2 × Lambda Technology NIR drying modules for water-based inks • Corona treatment 2 kW (SIT) _____ Web Guiding & Control • E+L web guiding system with: o 2 ultrasonic sensors o 1 line sensor • E+L ELSCAN video inspection system • Web cleaning system • Complete set of anti-adhesive rollers _____

Condition: used, Serial number: 24-0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21860 Description: We have a Pitsan ER80 paint filter for sale. This is used for larger painting/varnishing projects to provide better ventilation. Ready for delivery Own weight: 1 Kodpfx Ajxypqcoffofa Model: ER80 malefilter

Condition: good (used), Year of construction: 2016, Gallus EM 260 • Max. Printing Width: 250 mm • Complete machine control system retrofit: 2016 • Printing Units: 8 (dual-drive technology) • Application: Production of self-adhesive labels _____ Printing Equipment • 8 × Flexographic printing units • Print cylinders (1/8") – 8 pcs each: z=88, 92, 96, 100, 108, 116, 120, 124, 132 • Additional impression cylinders for thin and thick substrates • 46 anilox rollers for all applications • 4 × Sleeve systems z=88 for varnishing (including mounting station) • 4 × Fully equipped chamber doctor blade systems with peristaltic pumps • Screen printing unit _____ Die-Cutting & Converting • 3 × Die-cutting stations • 2 × Die-cutting units equipped with adjustable counter-pressure cylinders (Spilker Variabase system) • Magnetic cylinders (minimum 3 pcs each, 1/8"): z=88, 92, 96, 100, 108, 116, 120, 124, 132 • Rewinding & waste removal systems: o 3 × Matrix rewinders on rail system o Additional matrix rewinder o Double-spindle rewinder (roll-to-roll) Ksdpfsx Haclox Affsfa • Laminating unit on rail system • Insetter register system for pre-printed webs • BG 74 insert rewinder _____ Drying & Treatment • 8 × UV curing units from Uviterno (240 W/cm) including spare lamps and accessories • Corona treatment unit 1 kW • Integrated cooling and air extraction _____