Used Uv Printer for sale (3,306)

Condition: good (used), machine/vehicle number: MR1TLL29221, On behalf of our client, we offer a roll-coating UV applicator Sorbini. Commission sale. Codpfx Aijynb I Djisri

Condition: excellent (used), Xerox / Fiery EX-P 6 controller for the Xerox Iridesse. Tested and in good working condition. Codsxyv Nxspfx Aiiori All the equipment mentioned is not for sale/resale in Russia or any country subject to an EU embargo.

Condition: excellent (used), Year of construction: 2007, I sell the 2-lamp UV-drying tunnel Cefla UV 2000 M2 TTE 2000 Crodpsyzr Agsfx Aiiei Year 2007 Working width 1400mm. Total length 2,00m Very good condition, available immediately.

Condition: good (used), functionality: fully functional, working width: 500 mm, total width: 1,100 mm, total length: 2,250 mm, total height: 1,400 mm, Water-cooled LED-UV dryer in operation; the machine is equipped with a control system allowing speed adjustment. It features two powerful water-cooled LED lamps for immediate surface drying. Crjdpfx Aiey Exz Rjiji

Condition: new, Label printers and carton sealing machines LogComp / Bedo Credpey H Ex Sjfx Aiiji

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 322276, Year of construction: 2016, operating hours: 1,202 h, total length: 870 mm, total height: 1,200 mm, total width: 735 mm, type of input current: AC, overall weight: 250 kg, feed length X-axis: 255 mm, feed length Y-axis: 252 mm, feed length Z-axis: 200 mm, power: 1.5 kW (2.04 HP), We are offering for sale a Stratasys Objet Eden 260VS PolyJet 3D printer, originally purchased in 2017 and maintained in excellent working condition. The printer has been used in our architectural studio primarily for producing highly detailed architectural models of buildings designed by our office. Because of this specific use, the printer has very low operating hours and has always been handled with great care. The machine has only 1202 total printing hours, which is exceptionally low for this type of professional PolyJet system. Condition: - Fully functional and operational - Very low usage – only 1202 print hours - Maintained in excellent cosmetic and mechanical condition - Operated in a clean professional studio environment - Preventive maintenance performed regularly - Service and maintenance logs available upon request The printer was cleaned before and after every print using Stratasys-approved cleaning fluids and maintained according to the manufacturer’s recommendations. A couple of years ago the printer was properly cleaned and placed into long-term standby/storage mode following the appropriate procedure and has been stored safely since then. During its lifetime the only repair required was the replacement of the vacuum pump, which was carried out at the time and the printer has operated normally since. No other issues have occurred. The sale includes: - Stratasys Objet Eden 260VS PolyJet 3D Printer - Cleaning / washing station with pressure washer Cjdjyt Rk Eepfx Aiisri - Spare parts and accessories shown in the photos - Maintenance tools - Various filters and replacement components - The printer includes the original Stratasys HASP license dongle with material packages installed. Additional photos and log data can be shared upon request

Condition: ready for operation (used), Heidenhain UV 140 Power Supply, ID: 335 009-04, SN: 12182383 – supplied with test report, professionally fully overhauled and tested, comes with a 3-month warranty, guaranteed 100% operational. Delivery includes all items shown in the photos. Please note: In the exchange process, your defective return part must not have any mechanical damage such as fractures, as these are no longer repairable. In such cases, an additional charge of €1,000 incl. VAT will apply. Attention: You are bidding on a Heidenhain UV 140 inverter, ID 335 009-04, SN 12182383, as part of an exchange service. The unit is professionally overhauled, tested, and offered with a 3-month warranty. Delivery scope according to photos. In both repair and exchange, your returned defective part must be free of mechanical damage like breakages. If not, an additional invoice for €1,000 incl. VAT will be issued. Crjdox Dwz Rjpfx Aiisi

Condition: ready for operation (used), Heidenhain UV 140 power supply ID: 335 009-04 SN: 12182383 – with test protocol, professionally completely overhauled and tested, comes with 3 months warranty, 100% functional, scope of delivery as shown in the photos. Csdpfx Aiox Dw Aboiori

Condition: not inspected (used), Dear Sir or Madam We hereby offer you the following device for sale: Keyence Agilista 3200W 3D printer. Crsdpfjwktwkjx Aiioi The machine is sold with the equipment documented in the photos and recorded in the advert text. Location: 40764 Langenfeld ATTENTION: The device comes from an insolvency. We are auctioning it for the highest bid on behalf of the creditor/bank. This is a closed auction. We do not give any information about the current highest bid. Your bid becomes binding upon receipt by e-mail. Please inform us of your binding bid by 07.12.2025 at 10 am. You will be informed of the outcome of the auction within 72 hours of the end of the auction.

Year of construction: 1997, condition: used, Control for UV dryer, UV lamp, UV high-performance lamp, infrared dryer, UV dryer system, UV surface lamp, UV painting system -Manufacturer: IST Metz, control for UV dryer lamp Codpfsrd Acpex Aiisri -Type: M-20-1-S-SS -UV tubes: type M 200 S 2 -UV range: 180-450mm -Quantity: 4x controls available -Price per piece -Dimensions: 600/360/H600 mm -Weight: 77kg/piece

Condition: used, Machine base soil tillage machine, floor cleaning machine, floor curing machine Crsdpfxsqwprye Aiiei -Manufacturer: Minuteman, Multi-Clean machine base tillage machine -Type: 670691 UV-8 Power Supply -Voltage: 230V -Dimension: 600/440/H370 mm -Weight: 29 kg

Year of construction: 2015, condition: excellent (used), Dip-Tech GlassJet AR6000, Digital Printer for Glass, year 2015 Print resolution: 360 dpi (real) DIP SPECTRUM INK: Ceramic ink for both tempered and fired annealed glass Ink colors: Black, white, etch imitation, and various spot colors Codpfx Aijrhkp Ejijri There are currently 7 print heads in operation: 4 black and 3 white. They enable the printing of black and white. Maximum glass size: 3300 x 6000 mm Minimum glass size: 400 x 400 mm Glass thickness: 2 – 19 mm Operators: 1 Inline functions: Continuous conveyor Overall dimensions: 6071 x 7746 x 1600 mm (width x length x height) Image format: All common graphic formats including: PDF, PS, EPS, Tiff, BMP and JPEG Ambient temperature: 18 – 25 C Installed power: 400 VAC x 16A, 3 Ph. 50/60Hz In very good condition. Dismantled in February 2024. Available: NOW

Condition: good (used), Simatic panel, operator panel, machine control, interface panel, operating unit, control panel, keyboard, control panel teach pendant Cedpswz H Rrsfx Aiijri -Manufacturer: Basler, Operator Panel from printing machine OMSO Novadisc 4 3S UV -Type: unfortunately without type designation -Dimensions: 615/190/H445 mm -Weight: 28.1 kg

Condition: ready for operation (used), Konica Minolta C 450i in perfect condition, tested and ready to print System speed A4: Up to 45/45 ppm (mono/colour) System speed A3: Up to 22/22 ppm (mono/colour) Crodswx Ir Ejpfx Aiioi Auto-duplex speed A4: Up to 45/45 ppm (mono/colour) First page out time A4: 3.8/5.0 sec. (mono/colour) As an experienced retailer of used copiers, we have developed strong expertise in professional packing and pallet shipping, ensuring our customers receive machines in perfect condition. We deliver copiers sourced from and maintained by Konica Minolta France. If you have any questions, please do not hesitate to ask me. Our company offers the largest range of Konica Minolta production copiers and handles worldwide deliveries upon request. Please do not hesitate to contact us for further information.

Condition: used, Year of construction: 2007, UV dryer, Cefla UV 2000 - Manufacturer: Cefla/Sorbini - Model: UV 2000 M2 / TTE2500 - Year of manufacture: 2007 - Working width: 1,300 mm (1,445) mm - Working height: 900 ± 40 mm Csdpfjxn Nlvex Aiiori - Control panel on the right - Max. part height: 70 mm - Number of tubes from above: 2 - Straight-mounted tubes: 2 - Suitable for mercury tubes - Suitable for gallium tubes - Max. tube power: 120 W/cm - Bar transport - Length: 2,500 mm - Width 2,300 mm - Height 1,500 mm - Volts, Hz 400 / 50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/- 5 % Images are examples of a machine of the same design*

Condition: like new (used), functionality: fully functional, machine/vehicle number: D31369, Year of construction: 2019, operating hours: 73 h, total length: 864 mm, total height: 1,626 mm, total width: 711 mm, type of input current: AC, overall weight: 227 kg, input voltage: 230 V, input current: 7 A, input frequency: 50 Hz, table width: 355 mm, table length: 254 mm, construction height: 355 mm, --- RARE OPPORTUNITY --- Cedpexgh U Tjfx Aiijri Stratasys F370 for sale due to business closure. Barely used, with only 70 operating hours—essentially in like-new condition. This printer is ideal as an addition to existing machine parks or as a high-quality all-rounder for newcomers to 3D printing. The printer is currently packaged and in storage. It was inspected and serviced by the manufacturer’s authorized distributor prior to proper decommissioning. The most recent exported cfg file can be provided upon request. The F370 was designed with user-friendliness in mind, offering a powerful and virtually maintenance-free 3D printing system that is quick to learn and easy to operate. It supports a wide selection of materials for various 3D printing applications, typically including prototyping, the production of tools and fixtures, as well as low-volume manufacturing of end-use parts. Its compact footprint and quiet, safe operation—without requiring special arrangements—make the F370 ideal for workshops, offices, or even classroom environments. With soluble support material, even complex geometries with internal cavities can be created—uncommon in this class of printers. The four easily accessible material spool bays on the front (2x model & 2x support) allow for quick material changes. The complete package is rounded off by the GrabCAD Print and Insight design-to-print software applications, automatic calibration, an integrated camera for remote print job monitoring from your computer, and an intuitive front-panel interface.

Condition: ready for operation (used), Heidenhain UV 140 power supply unit Id. 335 009-02 SN: 10106578, the item has been completely overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, scope of delivery as per photos. Cedpfx Aijx Etm Ujiori

Year of construction: 2022, condition: like new (used), Zebra ZE511 Thermal Transfer Print Engine Model: ZE51143-L0E0000Z Year: 2022 Codpfjzpy Abjx Aiieri Brand new, unused, ex stores stock (open box)

Condition: used, functionality: fully functional, Well-maintained Roland VersaUV LEJ-640 UV hybrid printer in good working condition. This versatile printer can print directly onto a wide range of rigid and flexible materials, delivering high-quality, vibrant results with Roland's UV-LED technology. Ideal for signage, promotional products, packaging prototypes, displays, and specialty graphics. The printer has had regular professional maintenance throughout its lifetime and has been operated by a single owner since new. It has been carefully maintained to ensure reliable performance and consistent print quality. Csdpfxozw U Ube Aiieri Key features: UV-LED hybrid printing technology Prints on both rigid and roll media CMYK + White + Gloss capabilities Suitable for a wide range of substrates Regularly serviced and maintained One-owner machine Reliable and proven production printer Available for inspection and test printing. Please contact us for additional information, photos, or pricing.

Condition: excellent (used), For sale: F&K 16S flexographic printing press, 8 colors, manufactured in 2001, with a web width of 1100 mm, and equipped with a video camera from 2023. Crodpfszhgmwox Aiiji

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm Csdezf N Niopfx Aiieri 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: used, functionality: fully functional, machine/vehicle number: G7000034, Year of construction: 2021, operating hours: 12,000 h, The printers were purchased in July 2021, original price: €87,500. Regular maintenance was carried out by Stratasys. Reports are available. The printers are in top condition and fully functional. All print heads are present and in good condition. The printers are ready for collection. Cedezd Rtaspfx Aiisri

Condition: reconditioned (used), For Sale: EOS M400-4 – High-Performance Metal 3D Printer This EOS M400-4 is a state-of-the-art metal additive manufacturing system located at the customer’s site. It is equipped with 4 (four) 400W lasers, ensuring high precision and productivity for large-scale industrial applications. Specifications: • Laser Power: 4 x 400W • Technology: Direct Metal Laser Sintering (DMLS) Compatible Materials: This system supports a wide range of materials, making it ideal for diverse applications across industries such as aerospace, automotive, and medical. Compatible materials include: • Nickel-based alloys: IN718_1, HX-1, IN625_1, IN939_1, K500 • Aluminum alloys: Al2139 AM, AlSi10Mg, Constellium CP1 • Case Hardening Steel: CaseHardeningSteel 20MnCr5 • Stainless steels: 17-4PH, CX, 316L, PH1 • Tool steels: MS1 • Titanium alloys: Ti64 (grade 23, grade 5), TiCP (grade 2) Why Choose the EOS M400-4? • Large build volume for industrial-scale production. Crodpfx Aijzk Ekgjioi • High throughput for speed and precision. • Wide material compatibility for versatile applications. Services Included: • Transport & Installation Support: We can arrange safe relocation and installation at your facility. • Expert Maintenance Plans: Flexible plans to keep your machine in peak condition. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in providing high-quality, refurbished EOS additive manufacturing machines with comprehensive support. As the only provider offering a complete solution for used EOS equipment, we ensure reliable machines, tailored services, and premium materials for your production needs. What we offer: • Expert service: Installation, servicing, and upgrades performed by skilled former EOS technicians. • Exclusive materials: High-quality consumables tested and optimized for EOS systems. • End-to-end support: From transport to tailored maintenance plans, we handle every detail. Trust IM3D to help you scale your metal additive manufacturing capabilities with confidence. Contact us for more information or inquiries!

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 500 h, input voltage: 230 V, input current: 15 A, input frequency: 60 Hz, We are offering this very well-maintained Z Corporation ZPrinter 650 3D printer, manufactured in 2015, for sale. Crsdpfx Aezzk Ufjiiji Voltage: 100/115/230 V Current: 15/15/8 A Frequency: 50-60 Hz We are a workshop for people with disabilities and are selling the printer because we no longer have the demand for the products it produces. The printer has been used very little and is therefore in very good condition. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Inkjet printer for frame bending machine Length: 800mm Width: 1000mm Cjdehzgtuspfx Aiieri Height: 1900mm Weight: about 100kg