Used Uv Dryer for sale (2,495)

Condition: good (used), functionality: fully functional, working width: 500 mm, total width: 1,100 mm, total length: 2,250 mm, total height: 1,400 mm, Water-cooled LED-UV dryer in operation; the machine is equipped with a control system allowing speed adjustment. It features two powerful water-cooled LED lamps for immediate surface drying. Chjdpfoy Exz Rex Abasd

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, UV curing system for slats, profiled wood, and parquet Manufacturer: Cefla Type: TLFP Year of manufacture: 2005 UV curing tunnel for the continuous UV hardening of paints and coatings using high-intensity ultraviolet lamps directly in the production line. Cedpfx Abez A T T Rsaehd Passage width: approx. 350 mm Passage height: approx. 90 mm 1x adjustable UV lamp from above, left side, approx. 80-120 W/cm 1x adjustable UV lamp from above, center, approx. 80-120 W/cm 1x adjustable UV lamp from above, right side, approx. 80-120 W/cm 2x pivoting UV lamps from above Dimensions: approx. 5000 L x 1600 W x 2400 mm H (with fan) Weight: approx. 1500 kg Connected load: approx. 42 kW

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. - Manufacturer: Venjakob - Type: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right - Working width: 1.300mm - Max. Part height: approx. 100mm - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying Codjzv Tchspfx Abaohd - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor - Feed rate: ~ 2.5 - 7.5m/min. - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW - Location: in stock - Volt/HZ: 400/50

Condition: used, Year of construction: 2015, functionality: fully functional, working width: 1,300 mm, total height: 1,780 mm, total length: 9,000 mm, total width: 1,783 mm, LOW USAGE!!! Technological line – equipment characteristics The technological line consists of a set of devices designed for transporting, cleaning, drying, and curing components, including furniture fronts and panels. The TB 2000 and TB 1500 belt conveyors are equipped with belts resistant to abrasion, friction, and solvents. The drive is powered by a geared motor controlled by a frequency inverter, providing a feed rate of 2.2 to 20 m/min. The devices have independent control panels with PLCs. The SMARTCLEAN 33-F brush machine is used to clean components before the painting process. It has a steel, reinforced body, adjustable height of the working units, and a system of brushes, blowers, and deionizing bars. The working width is 1300 mm, and the range of thickness of the processed components is 3–80 mm. The feed rate is 4–20 m/min, and the brush speed is 250–1100 rpm. The machine is equipped with a PLC, a touch panel, and safety systems. Chjdpfx Aez Ahr Rebasd The UV-R SP M2 oven is designed for curing UV-cured products and for operation in a line with a working width of 1300 mm. It is equipped with two UV lamps, a cooling system, and an integrated conveyor with a length of 2000 mm. The total length of the oven is 12,000 mm, and the maximum component thickness is 80 mm. Control is via PLC and a touch LCD monitor, with the ability to save programs. The system enables precise adjustment of the radiation power and automatic control of the lamps and cooling. The TT 11000 chain conveyor has steel guides and chrome-plated beams. The length of the device is 11,000 mm, the operating speed is 2.1–20 m/min, and the drive power is 0.75 kW. Control is via a frequency inverter. The TR 1500 roller conveyor is equipped with driven PVC rollers with a diameter of 66 mm and a pitch of 125 mm. Its length is 1500 mm, and the feed rate is 2.2–20 m/min. The device has a PLC panel, a protective cover, and a photocell at the output. The ECOGEL 64/5 oven is designed for rapid drying of components using laminar flow of hot air. The flow is in the opposite direction to the direction of panel transport. The oven is equipped with a G4 filtration system, a heat exchanger with automatic temperature control, and supply and exhaust fans. The total length is 9000 mm, the working width is 1300 mm, and the maximum component thickness is 80 mm. The installed power is 3.7 kW, and the thermal power is 76,400 kcal/h. Control is via PLC and an LCD monitor. The AQUADRY LA/8 oven is designed for rapid drying of water-based stains and lacquers. It uses high-speed air knives to ensure efficient heat exchange. The process can be further accelerated using infrared lamps. Air recirculation helps to reduce energy consumption. The entire line has integrated control systems, safety features, and solutions that enable the automation of transport, cleaning, drying, and curing processes.

Condition: used, Year of construction: 2016, with a new conveyor belt. Functional Description(Source: Excerpt from the operating instructions) This 3D UV dryer is equipped with 2 UV lamps from aboveand 1 UV lamp from below, each with a power outputof 150 W per cm of lamp length (electrode spacing).The UV output can be adjusted from 50–100%.The output of the bottom lamp can be adjusted drying tunnel features automatic conveyor conveyor speed is continuously adjustable (1–20 m/min).The automatic material detection (which can be turned on or off) causesthe UV output to switch to standby mode (≥15% UV output)if no material passes the sensor for more than one minute. Csdpfx Aszf N Rgobashd Technical Specifications: - Manufacturer: Printworld- Model: 3D - PUVD- Lamp output: 150 W/cm- Year of manufacture: 2016- Working width: max. 1,300 mm- Number of lamps:2 lamps from above1 lamp from below- UV power control:UV lamps are individually adjustable (50%–100%)- Reflector: Printworld Multifocal reflector- Conveyor belt transport width: 1,400 mm- Total length: 4.5 m- Conveyor belt speed: 1–20 m/min- Max. part height: max. 60 mm- Conveyor belt type:PTFE glass fiber fabric conveyor belt- Conveyor speed control:Infinitely variable with digital control and monitoring- Conveyor drive: Stepper motor with variable conveyorspeed and digital control and monitoring- Energy savings: Automatic standby modewith power reduction of approx. 10%- Operation/control: Schneider Modicon M258 LogicController processor with Magelis color touchscreen- Infeed height: 850 – 900 mm- Outfeed height: 850 – 900 mm- Electrical connection: 400 V~, 50 Hz, 3-phase +N +PE- Current: 135 A- Location: from stock

Condition: good (used), Year of construction: 2016, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: 90-0122-DDI-IR-INTE, input voltage: 415 V, total length: 3,000 mm, total width: 1,000 mm, total height: 1,000 mm, type of input current: three-phase, year of last overhaul: 2026, conveyor belt width: 800 mm, UV drying tunnel manufactured by Natgraph, designed for use with screen printing machines. The machine was manufactured in 2016 and is in very good technical condition. The tunnel is currently in production use and operates without issues. Main Features: - IR heating section - 2 UV lamps with precise and independent power control - Integrated cooling section to reduce the temperature of printed sheets after curing - Automatic stacker for collecting finished sheets in a neat stack - Possibility to connect with a screen printing machine - Lowering table, which provides easy operator access to the printing machine Working Process The tunnel is used for UV ink curing in the screen printing process. Printed sheets pass through the IR section and then through the UV curing section, where the ink is quickly and evenly cured by UV radiation. After curing, the sheets pass through the cooling section to reduce their temperature. Finished sheets are then automatically collected by the stacker. When connected to a printing machine, the tunnel can automatically adjust the UV lamp power to save energy. Machine Condition Year of manufacture: 2016 Technical condition: very good Chsdpfxoyuztge Abajd Machine currently in continuous production use Regularly maintained Included Equipment Natgraph UV dryer tunnel IR heating section 2 UV curing lamps Cooling section Automatic sheet stacker ✔ Machine ready for production ✔ Inspection possible during operation

Condition: used, Year of construction: 1996, UV system UV light dryer IST STRAHLTECHNIK Lignocurve Model HL - 160 -1 H DL UV tubes T 1600 U1 Chedpfx Absx Hglajajd UV range 180-450 nm

Condition: excellent (used), Year of construction: 1999, operating hours: 40,000 h, functionality: fully functional, color channels: 5, Good working condition, belt width 1200mm Chjdpshtncuefx Abaod

Condition: used, Year of construction: 2002, UV dryer, Cefla UV 2000 - Manufacturer Cefla/Sorbini - Type UV 2000 M2 / TN3000 - Year of manufacture 2003 Cedpfoyifwpsx Abashd - Working width 1.300 mm (1.445) mm - Working height 900 + - 40 mm - Operating side right - Max. part height 70 mm - Number of tubes from above 2 pcs. - diagonally positioned tubes 2 pcs. - Suitable for mercury tubes - Suitable for gallium tubes - Tube power max. 120 W/cm - with belt transport - Length 3.000 mm - Width 2.300 mm - Height 1.500 mm - Volts, Hz 400 /50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/- 5%

Condition: used, Year of construction: 2007, UV dryer, Cefla UV 2000 Chsdpfx Aexn Nlvebaod - Manufacturer: Cefla/Sorbini - Model: UV 2000 M2 / TTE2500 - Year of manufacture: 2007 - Working width: 1,300 mm (1,445) mm - Working height: 900 ± 40 mm - Control panel on the right - Max. part height: 70 mm - Number of tubes from above: 2 - Straight-mounted tubes: 2 - Suitable for mercury tubes - Suitable for gallium tubes - Max. tube power: 120 W/cm - Bar transport - Length: 2,500 mm - Width 2,300 mm - Height 1,500 mm - Volts, Hz 400 / 50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/- 5 % Images are examples of a machine of the same design*

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, working width: 1,250 mm, pass-through height: 80 mm, UV System Venjakob - IST LIGNOCURE HL 140-4-N-DL POLYMERIZATION SYSTEM consisting of 2 UV dryers: Dryer 1 Overall length 2100 mm Overall width 2339 mm Workpiece dimensions min. 250 x 20 mm, max. 2500 x 1000 mm Chedpfx Abeyalc Nsasd Workpiece height max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of the IST lamps 140 mm Rotating reflectors Lamp rating per lamp 80 W/cm2 Beam length 1400 mm Lamp power 2 x 11.2 kW Air-cooled housing, capacity 1600 m³/h (motor 1.2 kW) Compressed air consumption 6 NL/h Belt conveyor Vanjakob, year of manufacture 1999, type Novo 40 Length 2100 mm Working width 1300 mm Working height 880 - 920 mm Feed drive 0.75 kW Feed speed 4 – 20 m/min (Line 2 - 4 m/min) Dryer 2 Overall length 3340 mm Overall width 2339 mm Workpiece dimensions min. 250 x 20 mm, max. 2500 x 1000 mm Workpiece height max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of the IST lamps 140 mm Rotating reflectors Lamp rating per lamp 80 W/cm2 Beam length 1400 mm Lamp power 2 x 11.2 kW Air-cooled housing, capacity 1600 m³/h (motor 1.2 kW) Compressed air consumption 6 NL/h Belt conveyor Vanjakob, year of manufacture 1999, type Novo 40 Length 3340 mm Working width 1300 mm Working height 880 - 920 mm Feed drive 0.75 kW Feed speed 4 – 20 m/min (Line 2 - 4 m/min) Common control cabinet for two drying tunnels 2000 x 1600 x 600 mm Operating voltage 400 V, AC, 50 Hz, 3 phases Total power of the complete UV system approx. 50 kW Operating side of the system is on the left Weight of the complete system approx. 2500 kg (Subject to changes and errors in technical data, as well as prior sale)

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: SLM06EC01-R1, workpiece weight (max.): 5,000 kg, This Performa Roller configuration features an entry and exit conveyor belt system and a system of rollers which feed workpieces through the spraying zone. It is equipped with 8 spray guns subdivided into 2 product circuits and a dry filtration system. It has a working width of 300 mm and is perfect for applying water and solvent-based stains and paints. 01. Performa 28 Belt has a continuous conveyor belt system for transporting workpieces and a paint recovery system. It is equipped with 8 spray guns subdivided into 2 product circuits and dry filtration. It has a working width of 240 mm and is also available in the 400 mm version. Perfect for applying water and solvent-based stains and paints.ž 02. This configuration is the ideal solution for applying 100% acrylic products. It is equipped with a continuous conveyor belt system, steel filters and a patented paint recovery system. Equipped with 6 spray guns on a single product circuit. It has a working width of 240 mm. 03. Performa Roller: roller conveyor system; working width 300 mm Codpjwrra Tofx Abaohd Performa Belt: conveyor belt system; working width 240 mm or 400 mm Performa UV Belt: for application of 100% acrylic products; conveyor belt system; working width 240 mm; patented recovery system

Condition: used, Year of construction: 1997, 3D UV dryer Superfici Elmag 2 tubes Cedpfx Abszf N Edoaehd - 3D UV-dryer Superfici & conveyer - the pictures show the machine before overhaul - Producer Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: M .415619, total length: 5,600 mm, total width: 1,300 mm, total height: 1,950 mm, overall weight: 1,500 kg, GPE/100-7″-UV Automatic machine for printing with registration on travel mugs This machine is in excellent condition Chodpfx Abo Aazuqjasd Also comes with a set of jigs to print the travel mug with an handle with the UV dryer Print cure instantly

Condition: used, Year of construction: 1994, Technical Specifications: - Manufacturer: IST - Year of manufacture: 1994 Codpszf N Tnefx Abaehd - Working width: 1300 mm - With 3D mirrors - Number of tubes (viewed from above): 1 - Tube positioned at an angle - Electrode spacing 1620 mm - Suitable for drying edges - Suitable for mercury and gallium tubes. - Tube power 80 W/cm - For mounting on an existing conveyor - Location: in storage - Volts, Hz 400 / 50 - Good condition

Condition: used, Pass-through width: 320mm, max. conveyor speed:20m/min, UV lamp power: 4kW, generator power: 5kW. machine dimensions X/Y/Z: approx. 2650mm/800mm/1750mm, weight: approx. 350kg. Chsdpfj Ad Nn Tex Abajd

Condition: used, UV drying system Totalisator operating hours 1484 The system was connected to a Heidelberg GTO 52 with LACO 52-Lackiersystem. No direct connection to the pre-machines/devices is required. Codpfx Abszr I U Deaehd It is a used UV lamp ADNOS 04204B4 (current designation ADS 53-160) installed.

Year of construction: 2005, condition: ready for operation (used), Drying capacity: 2x120W/cm, total drying capacity: 14000W, working width: 600mm, lamp type: 2x120W/cm, cooling: integrated, vacuum cassette: adjustable, conveyor belt speed: adjustable, machine dimensions X/Y/Z: approx. 3900mm/1200mm/1300mm, weight: approx. 700kg, operating hours: approx. 4400h. Including ozone extraction and a new measuring device UV-Integrator Full-UV with integrated heat shield and calibration certificate. 2 converters, 2 lamps and the belt have been replaced. Documentation available. On-site inspection is possible. Chjdsu Afz Repfx Abasd

Condition: good (used), UV dryer, UV lamp, UV high-performance lamp, infrared dryer, UV dryer system, UV surface heater Codpfxjqw D Ebo Abaehd -Manufacturer: Hönle, UV drying system for drying paints, varnishes and plastics -Type: Uvaprint 420 HPLK, incl. lamp -Number: 4x UV dryers available -Price: per piece -Dimensions: 600/355/H140 mm -Weight: 16 kg/piece

Year of construction: 1997, condition: used, Control for UV dryer, UV lamp, UV high-performance lamp, infrared dryer, UV dryer system, UV surface lamp, UV painting system Chsdord Acpopfx Abajd -Manufacturer: IST Metz, control for UV dryer lamp -Type: M-20-1-S-SS -UV tubes: type M 200 S 2 -UV range: 180-450mm -Quantity: 4x controls available -Price per piece -Dimensions: 600/360/H600 mm -Weight: 77kg/piece

Condition: new, Cefla painting system Csdewhbrwopfx Abashd

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11165/1, working width: 1,300 mm, workpiece height (max.): 40 mm, No minimum price – guaranteed sale to the highest bidder! Cjdpfxeyzpp Do Abajhd TECHNICAL DETAILS Maximum working width: 1,300 mm Maximum processable thickness: 40 mm EQUIPMENT Drying system with 3 UV lamps Transport system with motorized bars Separate control cabinet External reference: MGF025

Condition: like new (used), Year of construction: 2012, Atlas Copco CD 70+ adsorption dehumidifier YOM 2012 Capacity: 4,200 l / min Pressure dew point: -40 ° C Pressure drop: 0.16 bar Maximum operating pressure: 14.5 bar Filter sizes: DD / PD 60 - DDp 60 Weight: 120 kg Dimensions: 550 (L) × 364 (W) × 1479 (H) mm Chodpfxoyzaame Abaed inlet air temperature: 35 ° C ambient temperature: 25 ° C operating pressure: 7 bar

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 11/2022, total length: 2,750 mm, total width: 1,650 mm, total height: 1,800 mm, overall weight: 750 kg, Equipment: documentation/manual, Automatic CNC machine for UV screen printing – SD2-C4-UV (2022) MACHINE OFFERED: The SD2-C4-UV is an automatic, four-color CNC machine designed for screen printing. The machine performs multi-color printing on flat and three-dimensional (round) products, using UV and IR-cured inks in a single production cycle. The machine allows printing on three-dimensional objects in up to six colors, combining UV and IR technologies. It is intended for printing components made of non-flammable materials and plastics, provided that the temperature of the surfaces of the printed components is controlled. We offer for sale a fully functional, automatic CNC machine for UV screen printing, model SD2-C4-UV, manufactured in 2022 (serial no. 11/2022). The machine operates reliably; the sale is due to a change in the production profile. BASIC DATA • Model: SD2-C4-UV • Serial number: 11/2022 • Year of manufacture: 2022 • Condition: used, technically sound • Cycle counter: 381,124 • Documentation: complete operating manual (120 pages) TECHNICAL PARAMETERS • Power supply: 3 × 400 VAC / 50 Hz / max. power 10 kW • Dimensions: 2750 × 1650 × 1800 mm; weight ~750 kg • Operating pressure: 6.0 bar (max. 7.0 bar) • Printing of round objects: diameter 10–150 mm, height up to 250 mm • Printing of flat objects: up to 250 × 100 × 100 mm • Max. printing area: 310 × 180 mm (1 color) Cedpfszwdv Uex Abaehd • Operation: 1 operator MAIN ADVANTAGES • 4-color UV and IR screen printing in a single cycle (up to 6 colors) • 9 CNC servo drives – full automation of movement • Printing on round (diameter 10–150 mm) and flat objects • Vision system (camera + monitor) for precise screen alignment • Remote service via the Internet; software update • PLC controller with a touch HMI, menu in Polish • Complete safety systems according to CE standards (opto-electronic barriers, foot pedal) • UV reactor with a 200 mm lamp / ~250 W/cm

Condition: excellent (used), For painting-finishing line (Ultra - Violet rays system) Chedpfx Abegz Svnoasd Max working width mm 1300 Total machine lenght: mm 2900 (ca.) Workpieces thickness (working height): mm 0 - 80 (ca.) Adjustable feeding speed: m/min 0 - 40 (ca.) PLC control panel (Touch Screen) Built-in electric and command panel Total installed power KW 36.9 Equipped with: No. 2 U.V. lamps Motorized feeding system by metal rods runned with two side-chains In-feed suction system (to take in the air) Out-feed suction system (to take away the solvent fumes)