Used Uv Printer for sale (3,303)

Condition: used, Set of dual setups on rolling stand. Dual print heads allows for the marking of two product lanes Great for printing dates or codes on virtually anything, from plastic bottles to plastic bags to paper Stainless steel casing Stand mounted with casters Additional Details Voltage: other Rbsdpfoc Skirox Ahvew Voltage: 100-240 Phase: 1Ph Hertz: 60Hz

Condition: good (used), Technical specifications • Print speeds: - Outdoor-quality prints: approximately 800 square feet per hour (70 square meters per hour)(8) - Indoor-quality prints: approximately 400 square feet per hour (35 square meters per hour)(8) • Print resolution: Up to 1200 x 600 dpi • Media - Handling: Roll feed - Types: supports most low-cost, uncoated, solvent-compatible media - Size: Up to 2.64m (104 inches) wide - Loading: Up to 110 kg (242 lb), up to 25 cm (9.8 inch) outside diameter • Printing - Six-ink printing with HP 786 3-liter Latex Designjet Ink Cartridges: cyan, magenta, yellow, light cyan, light magenta and black. - Three total HP Wide Scan Printheads (each contains two colors – cyan/black, yellow/magenta, light magenta/light cyan) - Ink Type: HP Latex Inks - Nozzles: 10,560 per printhead - Outdoor display: up to 3 years unlaminated, 5 years laminated(2) on a range of media - Indoor display: up to 5 years unlaminated, 10 years laminated(2) on a range of Rbjdpfx Ahogyzzqsvsw media - Ink drop: 12 picoliters • The HP 786 Designjet Maintenance Kit, including a printhead cleaner roll and two air filters, keeps the HP Designjet L65500 printer operating at peak performance. • Interfaces: Gbit Ethernet

Condition: used, functionality: fully functional, Complete UV roller painting and finishing line for flat panels with: - maximum working width mm 1300 - maximum thickness mm 80 Rbjdpfxeywgmfj Ahvew - minimum length mm 350 - feeding speed (m/min) 10 (from 5 to 20) - working height mm 900 - working side right - UV finishing types transparent, matt and semi-gloss In attachment you’ll find a drawing and the line component and details for each equipment The line can be visited at 545600 Tarnaveni, Judetul Mures, Romania

Condition: used, Year of construction: 2008, Zebra110pax4 label printer and pneumatic stamp. RA2315 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Print type: Thermal transfer printing or direct thermal printing selectable Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Label length min: 12.7mm Print media width: 16-114mm Ribbon width: 25.4-107mm Ribbon length max: 900m Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) Dot size: 0.125mm x 0.125mm Rjdeux Sfzopfx Ahvjbw Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Print speed: approx. 2 seconds/label with application Electrical circuit diagram enclosed Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany

Condition: used, Legi-Air 4040Z with Zebra110pax4 label printer and pneumatic stamp. RA1933 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status indicator and buttons Print type: thermal transfer printing or direct thermal printing selectable Interfaces: RS 232 Seriel, IEEE 1284 Print media: standard media, tags and RFID media (reading and coding of RFIF labels) label length min: 12,7mm width print media: 16-114mm ribbon width: 25,4-107mm Ribbon length max: 900m Roll size diameter core: 25,4mm Redpfxok Abllj Ahvobw Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) dot size 0,125mm x 0,125mm Print speed: 12 inch/second

Condition: repair required (used), functionality: limited functionality, Year of construction: 2018, Hewlett Packard 4200 Multi Jet Fusion 3D Printer & Cleaning Station (Purchased July 2018) This unit is sold as a complete set along with Cleaning Station (2.2x1.2x1.5m), two Building Stations, two grey barrels and a pallet of inks. Operator monitor on the print unit is defective. Rbodoywb T Hjpfx Ahvjw

Condition: not inspected (used), Dear Sir or Madam We hereby offer you the following device for sale: Rbjdpowktwksfx Ahvow Keyence Agilista 3200W 3D printer. The machine is sold with the equipment documented in the photos and recorded in the advert text. Location: 40764 Langenfeld ATTENTION: The device comes from an insolvency. We are auctioning it for the highest bid on behalf of the creditor/bank. This is a closed auction. We do not give any information about the current highest bid. Your bid becomes binding upon receipt by e-mail. Please inform us of your binding bid by 07.12.2025 at 10 am. You will be informed of the outcome of the auction within 72 hours of the end of the auction.

Condition: used, functionality: fully functional, In this offer you buy a used large format printer/plotter ‘Roland TrueVis VG2-540’ Object of sale: 1 x Roland TrueVis VG2-540 with the following equipment: incl. colours: Black, cyan, light black, magenta, light magenta, orange, yellow incl. cutting function Condition: Rjdpfxeu Tc A Do Ahvsbw This offer is for a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: new, functionality: fully functional, Year of construction: 2025, total length: 1,200 mm, total height: 1,550 mm, total width: 1,138 mm, overall weight: 350 kg, input voltage: 220 V, nozzle diameter: 3 mm, feed length X-axis: 800 mm, feed length Y-axis: 800 mm, feed length Z-axis: 800 mm, power: 5 kW (6.80 HP), space requirement length: 1,200 mm, space requirement height: 1,550 mm, space requirement width: 1,138 mm, Equipment: compressor, INONE3D FGF800 (WXF-FGF800) – Industrial Fully Enclosed FGF 3D Printer The INONE3D FGF800 is a next-generation industrial 3D printer for 2025, developed for Fused Granulate Fabrication (FGF) and designed to provide cost-effective, large-format printing directly from plastic granules. This solution is ideal for manufacturing large prototypes, technical components, molds, and functional parts where reduced material costs and high productivity are key. The machine features a fully enclosed housing, which improves process reliability, increases operator safety, and ensures a more stable printing environment. With a generous 800 × 800 × 800 mm build volume, support for 1–5 mm plastic granules, and interchangeable nozzles (0.6–3.0 mm), the FGF800 is suitable for both high-speed, large-volume production as well as applications requiring higher detail. Technical Specifications: - Printing Technology: Fused Granulate Fabrication (FGF) - Model: WXF-FGF800 - Build Volume: 800 × 800 × 800 mm - Nozzle Diameter: 0.6–3.0 mm - Granule Size: 1–5 mm - Maximum Power Consumption: 5 kW - Power Supply: 220 V - Net Weight: 350 kg - Machine Dimensions: 1200 × 1138 × 1550 mm Rbsdpfxjyv Edas Ahvjw - Year of Manufacture: 2025 - Warranty: 12 months - Design: Fully enclosed industrial 3D printer - Availability: 2 units in stock

Year of construction: 2019, condition: excellent (used), functionality: fully functional, The Linx 8920 CIJ (Continuous ink jet printer) Print head included MIDI MK11 V4 Stainless steel machine stand included. Service module requires replacement. Serial number KF680 See data sheet below Rsdpfjyinpvjx Ahvebw

Condition: new, functionality: fully functional, Year of construction: 2026, total length: 3,000 mm, total height: 2,000 mm, warranty duration: 12 months, I offer a robotic 3D printer with an extruder from the manufacturer Cead and CNC control Siemens Sinumerik One - a solution for large-format printing of molds, design elements, boats, molds for lamination and much more. The machine is made in the Czech Republic and is offered including integration at the customer's site and training. Main features: Printing system: Extruder CEAD E25 (up to 12kg/h) or S25 (up to 24kg/h) - selection according to customer requirements Robotic arm: COMAU N-170 with a reach of 3 meters and a load capacity of 160 kg Rbsdpswgkqtsfx Ahvew Control system: Siemens SINUMERIK ONE - full CNC control, the possibility of debugging the technology using override. Software Compatibility: ADAXIS, AiBuild, RhinoCAM, Siemens NX, and other CAD/CAM platforms Condition: New machine Optional accessories: Heated print bed to optimize adhesion and print quality Note: Software and print bed are not included in the standard offer, they can be supplied as optional accessories. The price listed is with the basic Cead E25 extruder

Condition: refurbished (used), functionality: fully functional, total length: 2,772 mm, total height: 1,683 mm, total width: 2,027 mm, overall weight: 2,869 kg, iAM Marketplace – the official used machinery partner of Stratasys! Rbedpfx Aeytckqjhvjw Several professionally refurbished Stratasys F900 3D printers are available immediately. Each machine undergoes comprehensive inspection according to strict guidelines, with all print-relevant components overhauled and validated through multiple test prints. The result: reliable performance, high print quality, and a cost-effective alternative to new equipment. The machines vary in year of manufacture, configuration, and operating hours. Detailed information regarding condition and price range is available upon request. The Stratasys F900 is an industrial large-format FDM 3D printer featuring a build volume of 914.4 x 609.6 x 914.4 mm. This machine is suitable for functional prototypes, end-use parts, and production tooling. It offers high precision, repeatable print results, and dependable production throughput. More than 25 materials can be processed.

Year of construction: 2013, condition: good (used), PCB: 45 × 45 mm to 610 × 515 mm PCB thickness: 0.2 – 8 mm Stencil handling: automatic Squeegee material: metal or polyurethane Squeegee pressure: 1 – 20 kg Printing speed: 5 – 250 mm/s Rbedjyvlcpspfx Ahvow PCB clamping: pneumatic Interface: SMEMA Power supply: 110 – 240 V, 1 phase Current consumption: approx. 10 A Weight: approx. 650 kg All information provided without guarantee.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 2 h, Ultimaker Factor 4 – like new / showroom condition This unit has only 2 hours of print time (10 hours total hot time). It was used exclusively as a demonstration printer for a customer who ultimately did not proceed with the purchase. The machine has not been used in production and is in like-new condition. No original packaging. Comes with a full 12-month warranty. UltiMaker Factor 4 specifications: Printing Properties: - Technology: Fused Deposition Modeling (FDM) - Extrusion system: Dual-extrusion, direct drive print head with unique auto-nozzle lifting system and swappable print cores - Build volume: Single/dual material printing: 330 x 240 x 300 mm (13 x 9.4 x 11.8 in) - Filament diameter: 2.85 mm - Print profiles availability: 14+ UltiMaker materials, 250+ marketplace materials - Dimensional accuracy: ± 0.2 mm or ± 0.2% of feature nominal length Hardware Properties: - XYZ resolution: 6.25, 7.8, 2.5 micron - Homing sensor: Optical - Build plate: PEI-coated flexible build plate - Build plate temperature: Up to 120 °C (248 °F) - Build volume temperature: Actively controlled up to 70 °C (158 °F) with nozzle plane temperature uniformity within: ± 3 °C (5.4 °F) for temps < 50 °C (122 °F) ± 5 °C (9 °F) for temps < 70 °C (158 °F) - Extrusion flow: Closed-loop flow compensation - Max. extrusion temperature: 280 °C (536 °F): print cores AA, BB, DD 300 °C (572 °F): print core CC 340 °C (644 °F): print core HT - Closed-loop fans: Air filtering fan, air recirculation fans, part cooling fans, print core cooling fan - Compatible print cores: AA (0.25 mm, 0.4 mm, 0.8 mm) BB (0.4 mm, 0.8 mm) Rjdpfxsyvhwie Ahvjbw CC (0.4 mm, 0.6 mm) DD (0.4 mm, selected regions) HT (0.6 mm) - Material handling system capacity: 6 bays with NFC recognition (max 1 kg spool size) - Material handling system humidity control: Average relative humidity < 15% under all operation conditions - Microparticulate filtration: HEPA H13 - Emission rates (UFP & VOC): UltiMaker filaments below UL-2904 standards - Monitoring: HDR (high dynamic range) 1920 x 1080 px HD camera - Display: 7-inch touchscreen (1024 x 600 px) Connectivity: - Wi-Fi 2.4 & 5 GHz: IEEE 802.11 a/b/g/n/ac - LAN: Gigabit Ethernet - USB: 2.0 System on Module: - NXP i.MX8 Mini Quad (4 x 1.8 GHz), ARM Cortex-A53, 2 GB LPDDR4, 16 GB eMMC - Real time controller: i.MX RT1064, Arm Cortex-M7 600 MHz, 1 MB SRAM Power Requirements: - 100 – 240 V AC, 50 – 60 Hz max., 6A Physical Dimensions: - Printer: 695 x 605 x 1287 mm (27.5 x 24 x 51 in); 120 kg (265 lbs) - Shipping: 760 x 800 x 1587 mm (30 x 31.5 x 62.5 in); 137 kg (309 lbs) Ambient Conditions: - Operating noise: < 50 dBA - Operating temp: 18 °C – 30 °C (64 – 86 °F); humidity: 30 – 70% RH - Storage: 5 °C – 40 °C (41 – 104 °F); humidity: 20 – 90% RH Software: - Print job preparation: UltiMaker Cura 5.7.1 or newer - Print job management: UltiMaker Digital Factory - Supported file types: STL, OBJ, 3MF; printable formats: G, GCODE, UFP, STEP - System requirements: Windows 7 (64-bit), Mac OS X 10.12, OpenGL 2.1, 4 GB RAM (8 GB recommended) - Print process reporting: Supported

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 70 h, total length: 2,200 mm, total height: 2,600 mm, total width: 1,600 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 230 V, input current: 10 A, compressed air connection: 6 bar, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 30 °C, volume flow: 15 m³/h, We are offering this used 5000 Massivit 3D printer (only 70 operating hours), year of manufacture 2023. Supply voltage: 220/380-240/415 V Connection type: 3W+N+PE Rated current: 10 A Frequency: 50/60 Hz Short-circuit current: 5 kA Air pressure: 6-8 bar Air flow: 250 L/min Weight: 2500 kg Rsdpfx Ahoyvhubsvobw If you have any questions or require more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2008, Offset 5 color with coating KBA Rapida 74G-5+LV waterless UV Year: 2008 Number of impressions (mio): 19 Machine control - ColorTronic - Lithec - Keyless inking with Gravuflow system - Memory Jobs Feeder - Anti static device - Electronic double sheet control - Steel plate in feeder Printing units - Number of printing unit(s) - Straight machine - Automatic blanket washing device - Cooling system: Technotrans beta.z - Anilox ink metering on all printing units Coating - Number of coating unit(s): 1 - Water base coating: chambered ductor system Drying - Rapid Dry IR-Hot Air system - UV interdeck dryer - UV dryer in delivery Delivery Rbedpfx Ahoyr Hkrjvew - Standard delivery - Powder spray: Weko AP262 Accessories - Substrates: Suitable for plastic (PET, PVC, PP, etc.) and paper/cardboard - Includes Verico waterless plate cleanout unit

Year of construction: 2015, condition: used, functionality: fully functional, This listing is for a Rational UltraVent condensation hood for combi steamers of types 201 stand-alone units CM, CMP, and SCC, suitable for models manufactured from 2011 to the present. It includes a connection kit and is from the year 2015. A comprehensive inspection was carried out in our in-house workshop, and the unit is fully operational. You will receive an invoice with VAT shown separately. Our used equipment service for you: - 6 months warranty on all electrical components, limited to replacement of defective parts, excluding installation and removal costs - High-quality branded equipment at fair prices - Professional overhaul/inspection & expert cleaning - Tested & fully functional – or your money back - Flexible shipping or self-collection options Rsdeyr Ekqepfx Ahvsbw - Competent advice before and after the purchase - Provision of operating manuals, connection diagrams & spare parts - DGUV V3 safety certification This UltraVent hood features patented condensation technology, which captures and removes steam and vapors. Elaborate exhaust air system installations are a thing of the past—an external connection is not required. Installation is simple and can even be done retroactively at any time. Ideal for use in small kitchens, sales areas within butcher shops, bakeries, snack bars, and catering services. Technical data: W x D x H: approx. 886 x 1226 x 450 mm Power connection: V: 230 / Hz: 50–60 Serial number: EF1UE15075010900 Year of manufacture: 2015 Condition: used, inspected, fully functional Further details: - Integrated lighting - Air extraction capacity: approx. 1,000 m3/h Shipping: Delivery or self-collection by arrangement Worldwide shipping available on request Shipping to islands or mountain stations possible only by prior agreement Subject to change and error. If you have any questions, require advice, or would like to view the equipment in person, you can reach us by phone during our business hours: Monday–Friday 09:00–13:00 and 14:00–17:00. Sale exclusively under our general terms and conditions (GTC).

Year of construction: 2013, condition: used, functionality: fully functional, This Rational Ultra Vent hood for Rational combi steamers, including connection kit, is suitable for the combi steamers CMP, SCC 61/101 Electric from year of manufacture 2011 onwards (Index H+I). The hood has been inspected in our in-house workshop and is fully functional. You will receive an invoice with VAT shown separately. Service: We are happy to assist you in arranging a certified Rational customer service technician throughout Germany. Are you looking for a specific Rational device type? Contact us— we have access to a wide range of new and used equipment. We are happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our used equipment service for you: - 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding labor costs for installation and removal - Professional refurbishment / inspection & expert cleaning - Tested & fully functional – or your money back - Flexible shipping or local pickup options - Competent advice – before and after your purchase - Provision of operating manuals, wiring diagrams & spare parts - Inspected according to DGUV V3 This Ultra Vent hood features patented condensation technology, capturing and guiding steam and vapors. Elaborate exhaust air installations are now a thing of the past— no external connection required. Installation is simple and can even be performed retrospectively. Rbjdpfx Ahjyr Dzuevew Technical Data: W x D x H: approx. 854 x 1226 x 470 mm Power supply: V: 230 / Hz: 50-60 Weight: approx. 55 kg Serial number: ET1UC13105005032 Year: 2013 Type: 60.72.320 Condition: used, fully functional Shipping: Delivery or local pickup by arrangement Worldwide shipping on request Shipping to islands or mountain locations only by special arrangement Subject to change and errors. If you have questions, require advice, or would like to view an item in person, you can reach us by phone during our business hours: Monday–Friday 09:00–13:00 and 14:00–17:00. Sale is made exclusively under our general terms and conditions (GTC).

Condition: used, functionality: limited functionality, Year of construction: 2013, SLA IPro 8000 3D Printer Year 2013 Working but in need of a full service and someone who knows this kit. Pervious client paid £250k new! Comes with comsumbles resin. Redoyu Uxiopfx Ahvsbw There are 2x machines (8000) available the other machine is Year 2017. Still in production Can be inspected in london. Contact me for more info

Condition: good (used), Year of construction: 2016, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: 90-0122-DDI-IR-INTE, input voltage: 415 V, total length: 3,000 mm, total width: 1,000 mm, total height: 1,000 mm, type of input current: three-phase, year of last overhaul: 2026, conveyor belt width: 800 mm, UV drying tunnel manufactured by Natgraph, designed for use with screen printing machines. The machine was manufactured in 2016 and is in very good technical condition. The tunnel is currently in production use and operates without issues. Main Features: - IR heating section - 2 UV lamps with precise and independent power control - Integrated cooling section to reduce the temperature of printed sheets after curing - Automatic stacker for collecting finished sheets in a neat stack - Possibility to connect with a screen printing machine - Lowering table, which provides easy operator access to the printing machine Working Process The tunnel is used for UV ink curing in the screen printing process. Printed sheets pass through the IR section and then through the UV curing section, where the ink is quickly and evenly cured by UV radiation. After curing, the sheets pass through the cooling section to reduce their temperature. Finished sheets are then automatically collected by the stacker. When connected to a printing machine, the tunnel can automatically adjust the UV lamp power to save energy. Machine Condition Year of manufacture: 2016 Technical condition: very good Machine currently in continuous production use Regularly maintained Redpfjyuztgox Ahvsbw Included Equipment Natgraph UV dryer tunnel IR heating section 2 UV curing lamps Cooling section Automatic sheet stacker ✔ Machine ready for production ✔ Inspection possible during operation

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, working width: 1,250 mm, pass-through height: 80 mm, UV System Venjakob - IST, Model: LIGNOCURE HL 140-4-N-DL Year: 1999 (1990) POLYMERIZATION SYSTEM Consisting of 2 UV dryers: Dryer 1 Total length: 2100 mm Total width: 2339 mm Workpiece dimensions: min. 250 x 20 mm, max. 2500 x 1000 mm Workpiece height: max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of IST lamps: 140 mm Rotating reflectors Lamp rating: per lamp 80 W/cm² Length of irradiation: 1400 mm Redpfx Ahsyalc Novjbw Lamp output: 2 x 11.2 kW Air-cooled housing, capacity: 1600 m³/h (motor 1.2 kW) Compressed air consumption: 6 NL/h Conveyor belt Vanjakob, Year: 1999, Type Novo 40 Length: 2100 mm Working width: 1300 mm Working height: 880 - 920 mm Feed drive: 0.75 kW Feed speed: 4 – 20 m/min (Line 2 - 4m/min) Dryer 2 Total length: 3340 mm Total width: 2339 mm Workpiece dimensions: min. 250 x 20 mm, max. 2500 x 1000 mm Workpiece height: max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of IST lamps: 140 mm Rotating reflectors Lamp rating: per lamp 80 W/cm² Length of irradiation: 1400 mm Lamp output: 2 x 11.2 kW Air-cooled housing, capacity: 1600 m³/h (motor 1.2 kW) Compressed air consumption: 6 NL/h Conveyor belt Vanjakob, Year: 1999, Type Novo 40 Length: 3340 mm Working width: 1300 mm Working height: 880 - 920 mm Feed drive: 0.75 kW Feed speed: 4 – 20 m/min (Line 2 - 4m/min) Shared control cabinet for both drying tunnels: 2000 x 1600 x 600 mm Operating voltage: 400 V, AC, 50 Hz, 3-phase Total output of the complete UV system: approx. 50 kW Operating side of the system: left Total weight of the complete system: approx. 2500 kg (Subject to changes and errors in the technical data, as well as prior sale)

Condition: like new (used), functionality: fully functional, machine/vehicle number: 3009F484403, Year of construction: 2022, operating hours: 217 h, We are offering this 3D Systems ProJet2500 3D printer, manufactured in 05/2022, for sale. Rbjdpfjyfv Dbox Ahvew With only 217 printing hours (8 kg material), the printer is almost like new. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), total width: 399 mm, total length: 374 mm, total height: 260 mm, overall weight: 14 kg, type of input current: DC, input voltage: 220 V, The price per piece is valid for orders of a minimum of 10 pieces. used printer with toner Rjdpfx Aexbiagjhvebw

Condition: ready for operation (used), functionality: fully functional, total width: 490 mm, total length: 521 mm, total height: 546 mm, overall weight: 24 kg, type of input current: DC, input voltage: 220 V, Office printer. Rbjdoxac I Ijpfx Ahvjw

Condition: used, Year of construction: 2024, operating hours: 300 h, functionality: fully functional, number of ink cartridges: 4, number of print heads: 2, paper width (max.): 736 mm, 1.5 years old, lightly used, 50% of the original price. Roland TrueVis SG3-300 Print & Cut Large-Format Printer + Plotter Cutter – Excellent Condition – Lightly Used – Ideal for Stickers, Vinyls & Signmaking For sale is a Roland TrueVis SG3-300 large-format inkjet printer with integrated cutter plotter (Print & Cut System). This device is perfect for professional production of stickers, labels, vinyl lettering, signs, textile printing, advertising technology, magnets, and many other print and plotter products in a single operation. The sale is due exclusively to a change in our product portfolio, not for technical reasons. Condition and Usage: - Very well maintained and in perfect technical condition - Lightly used – approx. 2 days per week, 2–3 hours runtime each - Regularly serviced and carefully handled - Maintenance contract valid until 31/12/2025 - Last service in October 2025 - The printer will continue to be operated weekly until sale to keep all systems functional Rbodpox Dnrgofx Ahvew Original price: €12,400. Invoice from 10/2024 available. Inspection, test print, and trial run can be arranged by appointment. Optionally available: Doming machine for producing 3D domed products such as magnets, stickers, labels, and emblems Additional accessories on request If you have any questions, feel free to contact me anytime. I am happy to provide further information and details.