Used Uv Tunnel Flooring for sale (10,281)

Condition: excellent (used), Year of construction: 2002, I sell the 2-head 2-lamp UV-drying tunnel Cefla TLE/B/2+TTE 2500 Year 2002 Working width 1400mm. Total length 2,50m 2 Lamps HG 120 W + HG 120 W Credpfxst S Efgs Aiioi Total power 37,7 kW Very good condition, available immediately.

Condition: excellent (used), Year of construction: 2001, I sell the 2-head 4-lamp UV-drying tunnel Cefla Ecolight TLF/BB/4+TTE 4000 Year 2001 Working width 1400mm. Total length 4,00m Total power 74,3 kW Very good condition, available immediately. Cedji Eup Espfx Aiiori

Condition: excellent (used), Year of construction: 2011, I sell the 4-lamp UV-drying tunnel Cefla UV-R M4/3500 Year 2011 Csdpfxjt S Ehzs Aiiori Working width 1400mm. Total length 3,70m Total power 71,55 kW Very good condition, available immediately.

Condition: good (used), Year of construction: 2016, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: 90-0122-DDI-IR-INTE, input voltage: 415 V, total length: 3,000 mm, total width: 1,000 mm, total height: 1,000 mm, type of input current: three-phase, year of last overhaul: 2026, conveyor belt width: 800 mm, UV drying tunnel manufactured by Natgraph, designed for use with screen printing machines. The machine was manufactured in 2016 and is in very good technical condition. The tunnel is currently in production use and operates without issues. Main Features: - IR heating section - 2 UV lamps with precise and independent power control - Integrated cooling section to reduce the temperature of printed sheets after curing - Automatic stacker for collecting finished sheets in a neat stack - Possibility to connect with a screen printing machine - Lowering table, which provides easy operator access to the printing machine Working Process The tunnel is used for UV ink curing in the screen printing process. Printed sheets pass through the IR section and then through the UV curing section, where the ink is quickly and evenly cured by UV radiation. After curing, the sheets pass through the cooling section to reduce their temperature. Finished sheets are then automatically collected by the stacker. When connected to a printing machine, the tunnel can automatically adjust the UV lamp power to save energy. Machine Condition Year of manufacture: 2016 Technical condition: very good Machine currently in continuous production use Regularly maintained Included Equipment Natgraph UV dryer tunnel IR heating section 2 UV curing lamps Cooling section Credeyuztgjpfx Aiiei Automatic sheet stacker ✔ Machine ready for production ✔ Inspection possible during operation

Condition: excellent (used), Year of construction: 1999, I sell the 1-lamp UV-drying tunnel Cefla UV TTE 2000 Year 1999 Working width 1400mm. Total length 2,00m 1 Lamp GA 120 W Csdpfoynvw Hex Aiisri Very good condition, available immediately.

Condition: excellent (used), Year of construction: 2007, I sell the 2-lamp UV-drying tunnel Cefla UV 2000 M2 TTE 2000 Year 2007 Working width 1400mm. Total length 2,00m Codpeyzr Agsfx Aiiori Very good condition, available immediately.

Condition: excellent (used), Year of construction: 2005, I sell the combined tunnel for surface finishing Superfici Elmag Combiline. Configuration: 1-head roller coater Cleaning unit with dust exhaust system 2-head UV-drying tunnel Cleaning unit with dust exhaust system Model: Combiline. Working width: 1500mm Year 2005. Working hours: 4600 mthrs. Total length: 5,30m Total width: 2,40m Weight: 4000kg Available immediately. Fully working. Csdpfx Aijiuc R Hoisri

Year of construction: 2021, operating hours: 808 h, condition: ready for operation (used), functionality: fully functional, For sale is a vibration tunnel manufactured according to a custom design, intended for continuous transport and irradiation of bulk materials and other products suitable for vibration transport. The device was made to order, and its design was created with a specific technological process in mind. The entire unit is made of acid-resistant steel. The tunnel is equipped with 20 Philips TUV lamps, each with a power of 75 W, placed above the transport surface. During operation, the product is continuously transported through the tunnel and simultaneously exposed to UV-C radiation. 1. UV-C Application The UV-C system can be used for surface irradiation of products to reduce the number of microorganisms. Originally, the device was designed for use, among other things, for: • seed material, • grains, • herbs, • vegetables, • other suitable bulk products. The effectiveness of the UV-C process depends on factors such as the type of product, its properties, the thickness of the layer, and the exposure time. The possibility and effectiveness of using the device should be verified each time for a specific product and technological process. 2. Adaptability to Other Applications A significant advantage of the device is its individually designed, modular construction, which allows for further adaptation to the user's needs. After removing or modifying the UV-C system, the structure can be used as: • a vibration conveyor for bulk materials, • a vibration feeder, Crsdpfxoz A Tgwe Aiisi • a dispenser, • a device for evenly distributing the product, • an element of a process line that feeds the product to the next stage of the process, • a vibration screener – after using appropriate screens, • a device for transporting seeds, grains, spices, herbs, granules, and other materials such as pellets, frozen, and fresh vegetables and fruits suitable for vibration transport. The construction can serve as a basis for further individual adaptation according to the requirements of a specific production process. 3. Construction The device is entirely made of acid-resistant steel, using two Italvibra vibration motors and Rosta suspensions. Philips TUV lamps, each with a power of 75 W, are located above the transport surface. Shatterproof lamp covers have been used to increase safety in a production environment. The construction provides access to the working elements and allows for further modifications to the device depending on the planned application. 4. Device Condition Upon request, we can provide additional photos, videos, technical information, and discuss the possibilities of adapting the device to a specific application. 5. Technical Specifications Parameter Data Type of device UV-C vibration tunnel Design Custom design / made to order Construction Acid-resistant steel Tunnel length 420 CM UV-C lamps 20 × Philips TUV Lamp power 75 W Total UV-C lamp power 1500 W Product transport Vibration conveyor Vibration motors 2 × Italvibra Power adjustment Yes – adjustment of vibration force Suspension Rosta Operating mode Continuous operation Discharge Directly into a bag Overall dimensions 420 X 115 X120 Weight 400 KG Power supply 380V

Condition: excellent (used), functionality: fully functional, UV/IR tunnel in B1 format with automatic delivery. Can be mounted to a screen printing or B1 offset machine, feeding from another machine or a coating unit is available. Codpfxexn T Nxs Aiieri

Condition: excellent (used), Year of construction: 2015, I sell the 2-head UV-drying tunnel Superfici Essiccatoio UV Model: Poliedra S.Cure 1650x2 + TT1 3500. Year 2015. Available immediately. Crsdpeffk Etefx Aiiei Repairs needed: Display, Energy power units for each two UV-units

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 11/2022, total length: 2,750 mm, total width: 1,650 mm, total height: 1,800 mm, overall weight: 750 kg, Equipment: documentation/manual, Automatic CNC machine for UV screen printing – SD2-C4-UV (2022) Crjdpfxszwdv Us Aiioi MACHINE OFFERED: The SD2-C4-UV is an automatic, four-color CNC machine designed for screen printing. The machine performs multi-color printing on flat and three-dimensional (round) products, using UV and IR-cured inks in a single production cycle. The machine allows printing on three-dimensional objects in up to six colors, combining UV and IR technologies. It is intended for printing components made of non-flammable materials and plastics, provided that the temperature of the surfaces of the printed components is controlled. We offer for sale a fully functional, automatic CNC machine for UV screen printing, model SD2-C4-UV, manufactured in 2022 (serial no. 11/2022). The machine operates reliably; the sale is due to a change in the production profile. BASIC DATA • Model: SD2-C4-UV • Serial number: 11/2022 • Year of manufacture: 2022 • Condition: used, technically sound • Cycle counter: 381,124 • Documentation: complete operating manual (120 pages) TECHNICAL PARAMETERS • Power supply: 3 × 400 VAC / 50 Hz / max. power 10 kW • Dimensions: 2750 × 1650 × 1800 mm; weight ~750 kg • Operating pressure: 6.0 bar (max. 7.0 bar) • Printing of round objects: diameter 10–150 mm, height up to 250 mm • Printing of flat objects: up to 250 × 100 × 100 mm • Max. printing area: 310 × 180 mm (1 color) • Operation: 1 operator MAIN ADVANTAGES • 4-color UV and IR screen printing in a single cycle (up to 6 colors) • 9 CNC servo drives – full automation of movement • Printing on round (diameter 10–150 mm) and flat objects • Vision system (camera + monitor) for precise screen alignment • Remote service via the Internet; software update • PLC controller with a touch HMI, menu in Polish • Complete safety systems according to CE standards (opto-electronic barriers, foot pedal) • UV reactor with a 200 mm lamp / ~250 W/cm

Year of construction: 2014, condition: like new (used), COOLING (DEEP FREEZING) HORIZONTAL TUNNEL (Instruction manual added) Liquid nitrogen deep-freezing of foodstuffs Model ZIP FREEZ SILVER LINE 2 type 90X12 Overall dimension in m: Lengh 10,30 Width 2,30 Height 1,81 Height in cleaning position 2,31 Deep-freezing chamber Lengh 8,70 m Effective width 1,20 m Height 0,25 m Crjdpfx Aoyf Hlieiioi Surface in m2 10,44 Weight 3200 kg Made by SEPAR, France Was used for cooling of the hot filled desserts In complete with Associated Controls, Conveyor and Pipework

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, FOR SALE: COMPLETE UV PAINTING LINE – SORBINI / CEFLA / BARGSTEDT Individual machines can also be purchased! For sale: a complete, industrial UV painting line designed for finishing flat surfaces, furniture components, MDF, HDF boards, panels, and other wood-based materials. The line is equipped with automatic loading and unloading systems, wide-belt sanders, dust extraction systems, multiple coating stations, UV drying tunnels, and a UV printer. Main equipment of the line: • Automatic loading and unloading systems BARGSTEDT • Pallet storage systems BARGSTEDT • Wide-belt sander BUTFERING OPTIMAT SCR 413/RREE with HEESEMANN EA2 dust extraction • Wide-belt sander BUTFERING OPTIMAT SCR 213/EE • Brush sanding machine SORBINI SMART SAND 1 • Numerous CEFLA conveyors • Roller coating machines: SORBINI KOMPACT SYSTEM SORBINI SMARTCOATER SP1 (several units) SORBINI SMARTCOATER MF (several units) Cjdpfx Ajzg Epusiijri • CEFLA drying tunnels: hot air tunnels IR tunnels UV tunnels (UV 2000 M2, UV 2000 M3) • SORBINI T/20-3-STP UV printing line (3-head) The line enables the execution of a complete technological process: sanding, dust extraction, application of primers and paints, UV curing, UV printing, and final surface finishing. This is an ideal solution for manufacturers of furniture, furniture fronts, decorative panels, and carpentry elements. Machines from renowned manufacturers: SORBINI, CEFLA, BARGSTEDT, BUTFERING, HEESEMANN. Sale of the complete line. Viewing is possible by prior appointment. Detailed technical specifications available upon request.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: M .415619, total length: 5,600 mm, total width: 1,300 mm, total height: 1,950 mm, overall weight: 1,500 kg, GPE/100-7″-UV Automatic machine for printing with registration on travel mugs Codpfxs Aazuqe Aiisri This machine is in excellent condition Also comes with a set of jigs to print the travel mug with an handle with the UV dryer Print cure instantly

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, total length: 2,200 mm, total height: 1,230 mm, total width: 1,400 mm, type of input current: three-phase, product height (max.): 180 mm, product height (min.): 10 mm, product length (min.): 200 mm, product length (max.): 1,000 mm, product width (max.): 630 mm, product width (min.): 200 mm, input voltage: 400 V, compressed air connection: 6 bar, input frequency: 50 Hz, energy consumption: 21 kWh, feed rate X-axis: 26 m/min, workpiece weight (max.): 10 kg, For sale is an AMTEC film packaging system, consisting of a vertical angle sealing machine SPEEDshrink 40XXL PRO and a high-speed POF-XL shrink tunnel. The system was factory-adapted for larger products and product weights up to 10 kg. The enlarged sealing frame and the reinforced conveyor drive enable the packaging of products up to 1,000 mm in length. Crsdpfx Aj Ah Hvljiioi Technical data and features: -Product dimensions according to special design: Length 200–1,000 mm, Width 200–630 mm, Height 10–180 mm -Sealing frame: 1,200 × 700 mm -Product weight: up to 10 kg -Conveyor speed: up to 26 m/min -Additional frequency converter for speed control of the conveyor belts -Stable four-column guide for the vertical sealing frame -Height and pressure of the sealing frame adjustable -Adjustable perforation module -Compressed air requirement: 6 bar -Connection power angle sealing machine: approx. 4 kW Shrink tunnel POF-XL High-Speed PRO: -For processing POF shrink film -Double air circulation with adjustable airflow -Tunnel dimensions: approx. 1,700 × 790 × 350 mm (L × W × H) -External dimensions: approx. 2,200 × 1,400 × 1,230 mm (L × W × H) -Electrical connection according to documentation: 380 V, 21 kW The machine is in good, fully functional condition and has been used only sparingly. The machine is ready for operation and can be inspected and demonstrated under power after prior appointment. A trial run is possible after consultation. If you are interested, we look forward to receiving your inquiry.

Condition: good (used), Year of construction: 2017, functionality: fully functional, number of ink cartridges: 8, number of print heads: 2, paper width (max.): 1,600 mm, Equipment: documentation/manual, Mimaki UCJV300-160 UV Roll-to-Roll printer for sale, year 2017. Demo machine, regularly serviced and carefully maintained. The printer is in excellent working condition and ready for immediate production. Configuration: • Ink configuration: CMYKLcLmWW (1L) • 2 print heads, each with 4 channels • UV Print & Cut technology • Compatible with lower-cost alternative inks • Supports up to 5-layer printing • Nozzle recovery system allows replacement of up to 7 missing nozzles per channel • Regularly serviced and professionally maintained by the authorized service company CDS d.o.o. Included: ✔ RasterLink6 Plus RIP software, including plug-ins for CorelDRAW and Adobe Illustrator ✔ User training and instruction for machine operation and software setup available ✔ Demo machine, regularly maintained The printer is in very good condition, fully operational, and requires no additional investment. Inspection, test printing, and live demonstration available. PRICE: €5,900.00 + VAT Slovenia (EU) Csdpfx Aisz Sqrqsijri For inspection, test printing, machine demonstration, and further information, please contact: Blaž +386 41 618 208

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, UV curing system for slats, profiled wood, and parquet Manufacturer: Cefla Credpfoz A T T Rox Aiiei Type: TLFP Year of manufacture: 2005 UV curing tunnel for the continuous UV hardening of paints and coatings using high-intensity ultraviolet lamps directly in the production line. Passage width: approx. 350 mm Passage height: approx. 90 mm 1x adjustable UV lamp from above, left side, approx. 80-120 W/cm 1x adjustable UV lamp from above, center, approx. 80-120 W/cm 1x adjustable UV lamp from above, right side, approx. 80-120 W/cm 2x pivoting UV lamps from above Dimensions: approx. 5000 L x 1600 W x 2400 mm H (with fan) Weight: approx. 1500 kg Connected load: approx. 42 kW

Condition: used, Year of construction: 2016, with a new conveyor belt. Crsdpezf N Rgefx Aiioi Functional Description(Source: Excerpt from the operating instructions) This 3D UV dryer is equipped with 2 UV lamps from aboveand 1 UV lamp from below, each with a power outputof 150 W per cm of lamp length (electrode spacing).The UV output can be adjusted from 50–100%.The output of the bottom lamp can be adjusted drying tunnel features automatic conveyor conveyor speed is continuously adjustable (1–20 m/min).The automatic material detection (which can be turned on or off) causesthe UV output to switch to standby mode (≥15% UV output)if no material passes the sensor for more than one minute. Technical Specifications: - Manufacturer: Printworld- Model: 3D - PUVD- Lamp output: 150 W/cm- Year of manufacture: 2016- Working width: max. 1,300 mm- Number of lamps:2 lamps from above1 lamp from below- UV power control:UV lamps are individually adjustable (50%–100%)- Reflector: Printworld Multifocal reflector- Conveyor belt transport width: 1,400 mm- Total length: 4.5 m- Conveyor belt speed: 1–20 m/min- Max. part height: max. 60 mm- Conveyor belt type:PTFE glass fiber fabric conveyor belt- Conveyor speed control:Infinitely variable with digital control and monitoring- Conveyor drive: Stepper motor with variable conveyorspeed and digital control and monitoring- Energy savings: Automatic standby modewith power reduction of approx. 10%- Operation/control: Schneider Modicon M258 LogicController processor with Magelis color touchscreen- Infeed height: 850 – 900 mm- Outfeed height: 850 – 900 mm- Electrical connection: 400 V~, 50 Hz, 3-phase +N +PE- Current: 135 A- Location: from stock

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, working width: 1,250 mm, pass-through height: 80 mm, UV System Venjakob - IST LIGNOCURE HL 140-4-N-DL POLYMERIZATION SYSTEM consisting of 2 UV dryers: Dryer 1 Overall length 2100 mm Overall width 2339 mm Workpiece dimensions min. 250 x 20 mm, max. 2500 x 1000 mm Workpiece height max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of the IST lamps 140 mm Rotating reflectors Lamp rating per lamp 80 W/cm2 Beam length 1400 mm Lamp power 2 x 11.2 kW Air-cooled housing, capacity 1600 m³/h (motor 1.2 kW) Compressed air consumption 6 NL/h Belt conveyor Vanjakob, year of manufacture 1999, type Novo 40 Length 2100 mm Working width 1300 mm Working height 880 - 920 mm Feed drive 0.75 kW Feed speed 4 – 20 m/min (Line 2 - 4 m/min) Dryer 2 Overall length 3340 mm Overall width 2339 mm Workpiece dimensions min. 250 x 20 mm, max. 2500 x 1000 mm Workpiece height max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of the IST lamps 140 mm Rotating reflectors Lamp rating per lamp 80 W/cm2 Beam length 1400 mm Lamp power 2 x 11.2 kW Air-cooled housing, capacity 1600 m³/h (motor 1.2 kW) Compressed air consumption 6 NL/h Belt conveyor Vanjakob, year of manufacture 1999, type Novo 40 Length 3340 mm Working width 1300 mm Working height 880 - 920 mm Feed drive 0.75 kW Feed speed 4 – 20 m/min (Line 2 - 4 m/min) Common control cabinet for two drying tunnels 2000 x 1600 x 600 mm Operating voltage 400 V, AC, 50 Hz, 3 phases Total power of the complete UV system approx. 50 kW Operating side of the system is on the left Weight of the complete system approx. 2500 kg Cedeyalc Nopfx Aiiori (Subject to changes and errors in technical data, as well as prior sale)

Year of construction: 2017, condition: used, functionality: fully functional, This Rational Ultra Vent hood for Rational combi-steamers, including the connection kit, fits the CMP, SCC 61/101 electric combi-steamers from the production year 2011 to the latest model series (Index H + I); this hood is no longer suitable for the iCombi series. The hood has been inspected in our in-house workshop and is fully functional. The hood has a few dents, see photos, but this does not affect its function in any way. You will receive an invoice with VAT shown. Are you looking for a specific Rational appliance type? Ask us, we have access to a large range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs Professional overhaul / inspection & expert cleaning Checked & fully functional - or money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 This Ultra Vent hood features patented condensation technology, which binds and carries away vapors and fumes. Elaborate measures for exhaust air installation are a thing of the past. An external connection is no longer required. Installation is simple and can even be done later. Technical data: W x D x H: approx. 854 x 1226 x 470 mm Power connection: V: 230 / Hz: 50-60 Weight: approx. 55 kg Serial number: ET1UE17125022437 Cedpfx Ae Aa I E Aeiiori Year of manufacture: 2017 Type: 60.72.320 Condition: used, inspected, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like advice or would you like to see something on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively subject to our general terms and conditions (GTC).

Condition: used, maximum load weight: 28,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2010, next inspection (TÜV): 10/2026, loading space length: 13,520 mm, loading space width: 2,500 mm, loading space height: 2,520 mm, total length: 14,040 mm, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2010, Equipment: ABS, Knapen walking floor semi-trailer with grain hopper, all-aluminum construction * FLOOR: IN GOOD CONDITION! * Body + Frame: All-aluminum * 88 m³ volume * ABS * 3 x 9 tons SAF axles * Air suspension * Lift axle * Lifting/lowering system * Disc brakes * WABCO - Smartboard * Platform * Grain hopper and slide gate at the rear * Roller tarp * CARGO - Floor * Aluminum sliding wall * Pneumatic door locking * ALCOA rims * Tires: 385/65 R 22.5 * Tire tread: 8/11 14/14 8/8 mm * GVWR: 36,000 kg * Tare weight: 7,500 kg! * Overall length: 14,040 mm * Internal dimensions (including grain hopper): 13,430 x 2,480 x 2,490 mm - German semi-trailer! - First owner! - TÜV/MOT: 10/2026 - On request and for an extra charge: new! Crodps Ahqcisfx Aiiji Subject to errors and prior sale!

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: DM2AE437, number of ink cartridges: 6, color channels: CMYK + Weiß + Lack, number of print heads: 3, resolution (max.): 1,200 dpi, paper width (max.): 300 mm, paper height (max.): 420 mm, total length: 1,290 mm, total width: 1,355 mm, total height: 856 mm, counter reading (color): 41, type of input current: AC, input current: 5 A, input voltage: 230 V, Equipment: raster image processor, Title: Mimaki UJF-3042 MkII e (Year 2022) – Only 41 m² printed! Includes Kebab Option & Professional Free Package (SURA, UV DTF A+B Films, and Base Frame) Object Description: For sale is a top-of-the-line professional UV printing system: a Mimaki UJF-3042 MkII e (year 2022) including the high-quality Kebab option. The machine is being sold due to business closure and is a rare find on the used market: according to the meter reading, the machine has only printed a total of 41 m². You will receive a system in new condition at a fair used price. The machine has been meticulously maintained and was continuously connected to the power supply to ensure proper execution of the automatic maintenance and circulation cycles (preventing nozzle failures). Why proper pretreatment is so important in UV printing: A crucial factor in professional UV printing is the permanent adhesion of the color to challenging materials such as glass, metal, ceramics, or smooth plastics. Without special pretreatment, the ink can easily flake or scratch off. This is where the Pyrosil system (flaming unit) included in this offer comes into play: it creates an ultra-thin, invisible adhesive layer through silicidation and alters the surface tension. The result is an extreme, dishwasher-safe, and scratch-resistant bond between the material and the ink – absolutely essential for the professional and durable finishing of promotional items! Technical Highlights & Features: Model: Mimaki UJF-3042 MkII e (current generation) Year: 2022 Condition: Like new (only 41 m² total print volume) Configuration: CMYK + White + Varnish (LH 100) Kebab MkII Option: Included (original Mimaki device for 360° all-around printing on bottles, glasses, etc. – new price approx. €2,700) Crodpfsyr Aiwsx Aiiji Software: RasterLink 7 RIP software included 🎁 EXCLUSIVE FREE PACKAGE (additional equipment worth approx. €4,000!) Since we are completely closing down the business, we are giving away the following professional equipment for pre- and post-treatment free of charge with the printer. A separate sale of these components is not possible – a real all-in-one package for your production start: 1. SURA Instruments Pyrosil GVE 2 HB Professional flaming unit for silicidation (surface pretreatment). Ensures extreme adhesion on glass, metal, and ceramics + plastics. Includes hand torch and gas hose. Important note regarding the condition: The hardware of the Suralink Pyrosil flaming device is in excellent condition. However, the included consumables have exceeded their expiration date and should be reordered by the buyer for professional production. Current new price: approx. €2,900.00 net 2. Material Starter Set Includes UV-DTF film set (A+B). 3. Robust machine base frame Custom-fit and stable table/stand for the Mimaki. Ensures a safe, wobble-free stand during printing and the optimal, ergonomic working height. Pricing & Processing: The sale is made as a complete package with a proper invoice and VAT shown separately. Location & Collection: The machines are located in 33178 Borchen. An up-to-date nozzle test can be carried out during inspection. If you are interested or would like to arrange a viewing, please contact us directly via the messaging function.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15-35-19-01, total length: 29,011 mm, total width: 1,995 mm, total height: 1,250 mm, input voltage: 400 V, Equipment: documentation/manual, The device is in working condition, but it is currently out of service and stored in a dry and warm area. It can be started upon prior arrangement. All technical documentation and the CE declaration are included. A detailed description with specifications can be found in the attached .pdf documents. Codpfx Ao Af Ng Nsiijri The maximum working height (height of the cooled material) is 6 cm.

Year of construction: 2017, condition: used, functionality: fully functional, This Rational Ultra Vent hood for Rational combi-steamers, including the connection kit, is suitable for the CMP, SCC 61/101 electric combi-steamers from the model year 2011 up to the latest series (index H + I). This hood is no longer suitable for the iCombi series. The hood has undergone an inspection in our in-house workshop and is fully functional. You will receive an invoice with VAT shown. Are you looking for a specific Rational appliance model? Ask us, we have access to an extensive range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs Professional overhaul / inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating manuals, connection diagrams & spare parts Inspection according to DGUV V3 This Ultra Vent hood features patented condensation technology, which captures and removes steam and vapors. Extensive measures for exhaust system installation are a thing of the past. An external connection is no longer required. Installation is simple and can even be done retroactively. Cedps Adprxjfx Aiisri Technical data: W x D x H: approx. 854 x 1226 x 470 mm Power connection: V: 230 / Hz: 50-60 Weight: approx. 55 kg Serial number: ET1UE17035018272 Year of manufacture: 2017 Type: 60.72.320 Condition: used, inspected, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like a consultation or would you like to see something on site? You can reach us by phone during our opening hours: Monday to Friday from 9:00 am to 1:00 pm and from 2:00 pm to 5:00 pm. Sales are made exclusively according to our general terms and conditions (GTC).

Year of construction: 2014, condition: used, functionality: fully functional, This Rational Ultra Vent hood for Rational combi-steamers, including the connection kit, is suitable for the CMP, SCC 61/101 electric combi-steamers from model year 2011 to the latest series (index H+I); this hood is no longer compatible with the iCombi series. The hood has been inspected in our in-house workshop and is fully functional. You will receive an invoice with VAT shown. Service: We will gladly assist you in finding a certified Rational service partner throughout Germany. Are you looking for a specific Rational appliance type? Ask us – we have access to a wide range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. Professional overhaul/inspection & expert cleaning Checked & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Testing according to DGUV V3 This Ultra Vent hood features patented condensation technology, which captures and removes steam and vapors. Extensive measures for exhaust system installation are a thing of the past. An external connection is completely eliminated. Installation is simple and can even be done retroactively. Technical data: W x D x H: approx. 854 x 1226 x 470 mm Power connection: V: 230 / Hz: 50-60 Weight: approx. 55 kg Serial number: ET1UD14085007483 Year of manufacture: 2014 Type: 60.72.320 Crsde Aa Na Ujpfx Aiioi Condition: used, inspected, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively according to our general terms and conditions (GTC).