Used Universal Puller for sale (3,622)

Condition: excellent (used), Year of construction: 2015, - Travel X=3000 mm, Y=1500 mm, Z=1400 mm - Heidenhain iTNC 530 with handwheel HR 410 - NC rotary table for multi-sided machining 1600 mm x 1250 mm - 1-axis NC universal drilling and milling head, for simultaneous and positioning positioning operation (A-axis, 45°-axis) - Motor spindle 7,000 rpm max. SK 50, 530 Nm spindle torque - Tool changing system SK 50 / 40 places for 400 mm long tools tools - Chip screws in X-axis, optimum chip transport - Chip conveyor (hinged belt conveyor) for transverse conveying, Fabr. Knoll, front ejection - Coolant supply 950 l, made by Knoll - Outside/inside air at the spindle - IKZ 60 bar for deep hole machining - Operating mode 4 Laedpex Em Raofx Affsk - Full enclosure with safety glass panes with sliding doors, optimized for crane loading - Split sliding doors on the front side - Split sliding doors on the operator side - RMP 60 radio measuring probe - incl. washing gun - Short delivery time by arrangement, subject to prior sale - Used machine - Z-axis KGT renewed in September 2023 incl. bearings - Optional fixators and tie rods - optional commissioning/installation - optional transportation

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 390 mm, spindle bore: 116 mm, turning diameter: 635 mm, turning diameter over bed slide: 390 mm, turning length: 2,000 mm, Used lathe in very good condition, including a 400 mm 3-jaw chuck, 1 x steady rest and a Multifix toolholder. Technical specifications: Turning length: 2000 mm Swing over bed: 630 mm Swing over cross slide: 390 mm Swing in gap: 900 mm Lajdpfx Afsx Eln Rsfjk Spindle bore diameter: 116 mm Total weight: 4230 kg Chuck mounting: D1 11 in. Camlock Morse taper: No. 6

Condition: excellent (used), Year of construction: 2016, HAITIAN MARS II MA10000/6800 Universal ServoDrive (2016) only 17.000 hours in automatic cycle! Main Technical Parameters: Clamping force: 10,000 kN Opening stroke: 1220 mm Minimum mould height: 500 mm Lajdpfxowtgltj Affek Maximum mould height: 1160 mm Daylight between platens: 2380 mm Distance between tie bars: 1160 x 1160 mm Clamping platen size: 1650 x 1700 mm Screw diameter: 90 mm L/D ratio: 24.4 mm/mm Shot volume: 2721 ccm Shot weight (PE): 1986 g Injection rate: 544 g/s Max injection pressure: 2280 bar Machine dimensions: 12.5 x 2.49 x 2.75 m Machine weight: 50.000 kg Equipment and Features: 423 – Proportional valve for injection (Rexroth) S01 – 8x hydraulic core pullers (4x fixed platen, 4x moving platen) with servo motor 432 – 8x core relief 662E – 16x integrated hot runners 623 – Acoustic alarm 237C – Safety locking force sensor 430C – 8x pneumatic cascade control Barrel and screw designed for processing 30% glass-filled materials 419A – Parallel movement: opening/ejector or opening/core 667 – 6x freely programmable inputs/outputs Flow meter with 6 tubes + hoses + cable trays + valves + filters + nozzles + labor, all per Lamky specification (Stäubli quick couplings) Total sockets: 4x230V/16A, 2x400V/16A, 4x400V/32A Centering ring diameter (fixed and moving side): 250 mm 8x pressure gauges for core puller circuits 409A – 8x pneumatic valves (8 mm, 3/2), 4x fixed, 4x moving side E65 – Interface for temperature controller (4 zones) 236 – Automatic ejector bar retraction (operator side)

Condition: new, Center height 230 mm Center width 1000 mm Turning diameter over bed 460 mm Turning diameter without bridge 690 mm Turning diameter over support 285 mm Passage 58 mm Spindle mount DIN 55029 1 - 6" 12 speeds 25 - 2000 rpm Travel path - top slide 128 mm Travel path - cross slide 285 mm Feeds (longitudinal) 0.031 - 1.7 mm/rev Feeds (transverse) 0.014 - 0.784 mm/rev Thread (metric) 0.25 - 3.5 mm Thread (inch) 2 - 112 Gg/1" Thread (diametric) 8 - 144 D.P. Thread (module) 0.25 - 3.5 mm Motor power 400 V / 50 Hz / 5.5 kW Tailstock MK 4 Dimensions L x W x H 2020 x 1080 x 1600 mm Weight 1680 kg Accessories / Special features: • Lead and pull-spindle lathe in heavy-duty design with extensive standard equipment. Low vibration and smooth running. Including solid base and machine bed. • 3-axis digital display • 3-jaw chuck Ø 250 mm • 4-jaw chuck Ø 300 mm • Fixed and rotating steady rest Lsdpfjk Dn Nwex Affeak • Quick-change tool holder system Multifix size B mounted, 5-part • Strong and torsion-resistant construction of the machine base and bed, which is cast in one piece from vibration-absorbing gray cast iron. • Hardened and ground bed guideways • Generously dimensioned machine bed • All guides are provided with adjustable wedge strips • Central lubrication in the bed slide • Right / left rotation can be switched on the bed slide • Removable bed bridge for machining large workpieces • Adjustable tailstock for turning cones • Guaranteed concentricity < 0.015 mm measured in the spindle nose • Closed feed gear, gears and shafts are hardened and ground • Clear control element with solid selector levers for selecting the speeds • Oil bath change gear with hardened and ground gears • Handwheels with adjustable fine scaling • Main spindle hardened and ground and running in an oil bath, as well as tapered roller bearings • Longitudinal feed, can be switched off using 4 adjustable switching cams • Mechanical foot spindle brake • Lead screw cover • Acceptance protocol • Manufactured according to DIN 8606 toolmaker precision • CE compliant Delivery time: immediately, subject to prior sale Year of manufacture: 2023 (unused exhibition machine) Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), Year of construction: 2016, Make: HAAS Type of machine: UMC 750 SS Year of manufacture: 2016 Laedpfxex H T Ibs Affjk Control system: Haas Machine's weight: 6500 kg Tool holder: BT 40 x-travel: 762 mm y-travel: 508 mm z-travel: 508 mm Speed range: 15.000 1/min max. Table load: 300.0 kg Table dimensions: 500 mm Number of tools in the magazine: 40 Pos

Condition: used, Year of construction: 1989, grinding diameter 200 mm grinding length 620 mm Lasdox H Tunepfx Affjk centre height 100 mm grinding wheel diameter 350 mm grinding wheel width 50 mm bore 127 mm work piece spindle speed 65-500 U/min grinding head swivelling 360 ° grinding spindle head - swivable 5° + - ° +-8 ° longitudinal feed of the table 620 mm table speeds 0-5 m/min total power requirement 5 kW weight of the machine ca. 2,6 t Delivered overhauled in 2023. Used very little Geometrically overhauled and new painted. -internal grinding device included. -2-axis digital read out Heidenhain -tailstock with cylindricity adjustment. -2-axis DRO Heidenhain -cooling unit (paper tape) Accessories see fotos

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed Lodox Em N Aepfx Affsak • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Year of construction: 2022, condition: ready for operation (used), A CNC double-spindle turning machine DMG Mori is available. Turning length: 800mm, power: 25kW/32kW, torque: 280Nm/360Nm, speed: 5000rpm, Y-axis: +/-100mm, B-axis: +/-110°, tool stations: 80, max. chuck diameter: 210mm, tool interface: HSK-A63, drawtube inner diameter: 67mm, control: Siemens 840D sl, operating hours: approx. 4786h, program hours: approx. 1937h. Including short bar loader IRCO ILS-MUK 100/16, oil mist separator and scraper chip conveyor. Documentation available. On-site inspection is possible. Laodpfox H S I Tsx Affsk

Condition: used, Year of construction: 2010, functionality: fully functional, Model: ZX 6350 C SN: 1004026 Supplied with the following configuration: - SINO 3-axis digital readout, Model: SDS-6-3V - Milling head rotatable and swiveling +/- 90° - Quill feed operated via cross handle or fine feed with handwheel - Spindle speed range: 40 – 1,750 rpm - Automatic table feed on X-axis - Manual tool clamping vertical/horizontal with M12 drawbar - Manual clamping on all 3 axes - Coolant system - Chip tray - Lighting - Including accessories: (machine vice HP-40) - Technical documentation - CE-compliant version - Weight: 1,120 kg Technical Specifications: Table size: 280 x 1,000 mm Number of T-slots: 5 pcs. T-slot size: 14 mm Max. drilling capacity in ST37: Ø 30 mm Travels: X-axis: 490 mm Y-axis: 260 mm Z-axis: 460 mm Spindle head (manual): 330 mm Vertical milling head: Quill travel: 120 mm Spindle taper: ISO 30 Motor output: 1.5 kW Spindle speed range: 115 – 1,750 rpm Spindle speed steps: 8 (115 - 230 - 290 - 360 - 580 - 720 - 875 - 1,750) Horizontal spindle: Spindle taper: ISO 30 Motor output: 2.2 kW Spindle speed range: 40 - 1,300 rpm Spindle speed steps: 12 (40 - 60 - 80 - 110 - 150 - 200 - 270 - 380 - 510 - 680 - 950 - 1,300) For horizontal spindle operation, the upper beam with head can be fully rotated +/- 90° on the column. Feeds X-axis: Number of feeds: 8 steps (24 - 40 - 65 - 100 - 185 - 285 - 470 - 720 mm/min.) Min. distance spindle nose to table: 95 mm Max. distance spindle nose to table: 470 mm Ljdpfoxu Uwkox Affeak Dimensions (LxWxH): 1,520 x 1,330 x 2,220 mm Weight approx.: 1,120 kg

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: U280733511525, travel distance X-axis: 600 mm, travel distance Y-axis: 855 mm, travel distance Z-axis: 805 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, spindle speed (max.): 16,000 rpm, coolant supply: 38 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - Powerful motorized spindle - 127 tools in the system - IKZ 38 bar _____ Basic machine G350 AB Generation 1 Travel path of the X-axis 600 mm Travel path of the Y'-axis 855 mm Travel path of the Z-axis 805 mm Power supply 400 V, 50 Hz, TN-S Work area door, manually operated, for manual loading/unloading Decentralized mist collector unit for the work area Machine cooling system with air-cooled cooling unit (11 kW) SIEMENS SINUMERIK 840D sl control system Cycle 996 (optimizing machine kinematics) Tilting table unit (A'-axis) Rotary table with pallet clamping system GROB (B'-axis, PW) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW (GROB) GROB spindle diagnosis GSD Single disk-type tool magazine HSK-A 63 with 34 tool pockets Additional tool magazine TM99 HSK-A 63 with 99 tool pockets Tool cleaning device Tool coding, system BIS-C (BALLUFF) Electromechanical tool breakage detection device Pallet change system for 2 400 x 400 mm pallets Additional control panel Palette 400 x 400 mm, grid holes, with pallet changer hook Pallet equipped with 6 fluid connections Scraper conveyor, discharge height 1,100 mm High-pressure cutting fluid system (5-38 bar, ICS) Cutting fluid low-pressure system Lodpex H Shgefx Affjak Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Oil skimmer for cutting fluid care Flushing unit for the base of the work area Air gun at the work area Flush gun at the work area Flushing unit (Z-axis) Warranty 3 months

Condition: good (used), Year of construction: 2006, 1. TECHNICAL DATA Working area X axis: 400 mm Y axis: 450 mm Z-axis: 350 mm B-axis: +-110 ° C axis: 360 ° Working spindle Speed range: 100 - 42`000 rpm tool holder: HSK E 40 spindle power at 40 % ED: 13 spindle power at 100 % ED: 10 Torque at 60 % ED: 4,25 Torque at 100 % ED: 3,2 Lubrication: oil/air Feed rate Lajdpfx Ajx H Ntajffjk Rapid traverse speed: Max. 40 m/min B axis: 150 rpm C axis: 250 rpm Axis acceleration, XYZ: Max. 1g (10 m/s2) B axis: 100 rad/s2 C axis: 300 rad/s2 Tool changer: 68-fold Chip to chip: 12.5 s Tool change time: 10,0 s Work table: 120 mm Max workpiece diameter that can still be rotated 360 °: 230 mm Max. Workpiece height: 350 mm Max. Workpiece weight: 25 kg Hfsbrjigrf Ie Icm Ener Control: Heidenhain iTNC 530 Weight: 5500 kg

Condition: repair required (used), Year of construction: 1999, operating hours: 70,000 h, functionality: unexamined, machine/vehicle number: 13290, overall weight: 4,800 kg, a used HERMLE milling machine - U 630 T - No. 13290 The machine was purchased second-hand in 2023, refurbished, and put into operation. The TNC 426 control unit was replaced, as well as the fan; spindle power was measured, the spring assembly was exchanged, and approximately 100 man-hours were invested. Subsequently, an accident occurred during the loading process, when the used milling machine fell off the forklift forks from a height of approximately 1,500 mm. The entire machine housing was severely deformed and twisted. Some of the enclosure doors were broken out. The sliding door to the working area was severely bent forward and no longer functional. The mounting bracket for the control unit was heavily deformed. The electrical components were almost completely torn from their fixings and were dangling from the cabling coming out of the control cabinet. The point of impact was in the top left area of the rear enclosure element. The material in this area was heavily abraded/scratched with black dirt deposits adhering to the enclosure. The upper cover of the working area had been ripped out of its mounting and was missing. All panel gaps of the housing showed significant irregularities. A louvered cover device inside the working area was torn from its mount, and the guide bar of the device was clearly bent downward. Further damages possible. Our ref.: BT/KÖ/255187/25/JPA Location: 57578 Elkenroth Lasdsx H Iyfspfx Affsk

Condition: used, Year of construction: 1962, arm length 1250 mm taper MK 5 Bohrwürfel Ledpfxox Edwzs Affsak

Condition: ready for operation (used), Year of construction: 2012, General Data Machine weight 21000 kg Main Drive Spindle speed range 18000 Number of axis 5 Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 1250 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 1000 mm Z-Axis Rapid Traverse 60 m/min Workpiece Workpiece weight 2000 kg Tools Type of tool holder HSK-A63 Laodpfxjx D Eh Ee Affsk This 5-axis DMG MORI DMC 100U duoBlock was manufactured in 2012. It features a pallet clamping surface of 1000 × 800 mm, rapid traverse rates up to 60 m/min, and a high-speed spindle at 18,000 rpm. The machine includes a 60-position tool changer and a 980-litre coolant system. Accessories like a chip conveyor, oil mist collector, and BLUM laser tool measurement enhance its functionality. If you are looking to get high-quality milling capabilities consider the DMG MORI DMC 100U duoBlock machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, Main Drive Number of axis 5 This 5-axis DMG DECKEL MAHO DMU 70 eVo was manufactured in 2008. Consider the opportunity to buy this DMG DECKEL MAHO DMU 70 eVo universal machining centre. Contact us for more information. Application Types Lsdpfx Aox D Hpwsffeak Milling

Condition: ready for operation (used), Year of construction: 2018, General Data Measurements width 2700 mm Measurements depth 10800 mm Measurements height 3100 mm Machine weight 16000kg Lajdpfx Afjx D E Tzofek This 5-axis RASOMA EBZ 200-500 was manufactured in 2018, featuring a robust 16,000 kg weight and comprehensive dimensions of 10800 × 2700 × 3100 mm. It includes a high-performance tool spindle with a 7.5 kW Siemens motor, capable of speeds up to 2000 rpm, and advanced cooling and hydraulic systems ensuring efficient operation. If you are looking to get high-quality milling capabilities consider the RASOMA EBZ 200-500 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, Main Drive Number of axis 5 Spindle Speed 15000 RPM Spindle motor power 46 kW Tool taper SK 40 Movement X-Axis Movement 2600 mm Z-Axis Movement 900 mm Y-Axis Movement 1100 mm Control Unit Laedox D Iclopfx Affok Brand SIEMENS Model 840D sl This 5-axis DMG DECKEL MAHO DMF 260-11 was manufactured in 2017. A universal machining centre featuring a travelling column, X-axis linear drive at 80 m/min, and a motor spindle speed up to 15,000 min-1. It includes a swivel head, a 30-tool magazine, and a rigid table measuring 3,200 x 1,100 mm. Consider the opportunity to buy this DMG DECKEL MAHO DMF 260-11 universal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 3450 kg Lsdpfx Afsx D H Tpjfeak Control Unit Brand Schüco Main Drive Spindle speed range up to 18000 rpm Number of axis 4 Movement X-Axis Movement 7530 mm Y-Axis Movement 1180 mm Z-Axis Movement 660 mm Additional Equipment Number of clamps: 8 This 4-axis SCHÜCO PBX AL-7200 was manufactured in 2008. It features a large X-axis travel of 7,530 mm, a Z-axis of 660 mm, and a maximum spindle speed of 18,000 rpm. The machine includes an 8-position tool magazine and is capable of machining from three sides, suitable for both aluminium and steel profiles. It comes with a SCHÜCO CNC control system and weighs approximately 3450 kg. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2020, Main Drive Spindle speed range 15000 RPM Movement X-Axis Movement 1016 mm Y-Axis Movement 635 mm Z-Axis Movement 635 mm Table Lajdjx D Smuopfx Affek Min distance between vertical spindle and table 102 mm Max distance between vertical spindle and table 737 mm Additional Equipment Chip Conveyor with Belt Drive Export Packaging 8-Station Pallet Pool for UMC UMC Spare Tool Storage (1 unit) Through-Tool Air Blast (TAB) Auxiliary Coolant Filter Chip Tray Filter Kit This 5-axis HAAS UMC-1000SS was manufactured in 2020. It features a large working envelope with X, Y, and Z axes measuring 1016 mm, 635 mm, and 635 mm respectively. Ideal for complex geometries and multi-sided machining. Consider the opportunity to buy this HAAS UMC-1000SS universal machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2021, Control Unit Brand HEIDENHAIN Model iTNC530 HSCI Main Drive Spindle speed range 20-28000 rpm Spindle motor power 55/43.5 kW (40/100%DC) Movement X-Axis Movement 1050 mm Y-Axis Movement 800 mm Z-Axis Movement 560 mm Additional Equipment Tool Taper: HSK-A63 DIN 69893 / Tool Magazine: 30-position disk tool magazine, 60-position pickup chain type Scraper Belt Chip Conveyor and Machine Bed Flushing / Separate Water Treatment Unit: 980-liter tank and paper filter / Pump: 40 bar / 23 l/min for internal cooling through spindle / Extended Chip Flushing / Rotating Inspection Window / Manual Coolant Flushing Gun / Internal Compressed Air Cooling: Through spindle / EROWA Pallet Handling System Preparation Documentation: English, Hungarian / Display Text: German/Hungarian / Screen Text: German/Hungarian DMG MORI Monitoring: D-ME406* DMG MORI Messenger V4 / DMG MORI Software Solutions: DMG MORI Service Agent, DMG MORI NETSERVICE, DMG MORI IoTconnector This 5-axis DMG MORI HSC 105 universal machining center was manufactured in 2021. It offers advanced capabilities for precision machining. Consider the opportunity to buy this DMG MORI HSC 105 universal machining center. Contact us for more information. Application Types Lasdpfsx D D Tgjx Affok Milling

Condition: ready for operation (used), Year of construction: 2021, operating hours: 305 h, Control Unit Brand HAAS Main Drive Spindle speed range 15000 Tool taper HSK-A63 Number of axis 5 Lajdex D Srdopfx Affjk This HAAS UMC-500SS Vertical Machining centre was manufactured in the year 2021 in the United States and has 305 spindle hours. It is equipped with a HAAS control unit and has 5 axis. The machine has a spindle speed of 15000 rpm. The 2 units are available. Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, Control Unit Brand SIEMENS Model 810 D General Data Measurements width 2815 mm Measurements depth 4325 mm Measurements height 2450 mm Machine weight 4010 kg Lodpfx Afsx D Hbgjfjak Main Drive Number of axis 5 Movement X-Axis Movement 500 mm Y-Axis Movement 450 mm Z-Axis Movement 400 mm Table Outer length 630 mm Outer width 500 mm Table load 200 kg Additional Equipment No. of Tools: 16 This 5-axis DMG DECKEL MAHO DMU 50 eco was manufactured in 2011, offering advanced CNC milling capabilities. Ideal for complex geometries and precision parts, this machine represents a significant asset for enhancing production efficiency. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2015, operating hours: 13,907 h, General Data Machine weight 9000 kg Control Unit Brand HEIDENHAIN Table Table load 800 kg Main Drive Number of axis 5 Spindle Speed 14000 RPM Spindle motor power 29.3 kW Tool taper BT 40 Movement X-Axis Movement 1020 mm Z-Axis Movement 610 mm Laedex D Hapopfx Affek Y-Axis Movement 610 mm Tools Slots in storage 32 Max weight 7 kg This 5-axis Eumach HSM-5XC was manufactured in 2015, featuring a Heidenhain control unit and a robust 5-axis rotary table with a Ø 610 mm diameter. It supports a maximum workpiece load of 500 kg and offers extensive axis travels (X/Y/Z: 1020/610/610 mm). The spindle reaches speeds up to 14,000 rpm, powered by a 29.3 kW motor. If you are looking to get high-quality milling capabilities, consider the Eumach HSM-5XC machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2018, operating hours: 11,000 h, Control Unit Brand HEIDENHAIN Main Drive Spindle speed range 15000 Number of axis 5 Movement Z-Axis Movement 700 mm X-Axis Movement 1350 mm X-Axis Rapid Traverse 30 m/min Y-Axis Movement 1150 mm Y-Axis Rapid Traverse 30 m/min Workpiece Workpiece weight 1600 kg Table Table load 1600 kg Tools Slots in storage 30 Ljdsx D D Eiopfx Affoak This 5-axis +GF+ MIKRON HPM 1350U was manufactured in 2018. Ideal for advanced machining, this universal machining centre ensures precision and efficiency. Consider the opportunity to buy this +GF+ MIKRON HPM 1350U universal machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand SIEMENS Model SIEMENS 840D Main Drive Number of axis 4 Movement X-Axis Movement 3000 mm Y-Axis Movement 3000 mm Z-Axis Movement 1000 mm Ljdpfsx D D Drsx Affsak Additional Equipment CNC Portal Milling Machine with integrated turning capability, suitable for CNC boring, milling, turning, and angle head machining This 4-axis Unisign UNIPORT 6000 was manufactured in 2007. A universal machining centre, it offers robust construction and precision for diverse machining needs. Consider the opportunity to buy this Unisign UNIPORT 6000 universal machining centre. Contact us for more information. Application Types Milling