Used Universal Milling Head for sale (23,945)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 40167, Auction of a MAHO universal milling machine! Godex Ngkzepfx Agbjil

Condition: used, Year of construction: 2001, x-travel 2.000 mm y-travel 1.200 mm z-travel 1.400 mm Control Heidenhain 426 spindle tunring speed 3.000 U/min tool taper SK 50 number of tool places 20 Pos. In our opinion, the machine is in good used condition and can be inspected Giodpexu Nxvjfx Agbsl under power by appointment. Technical Features & Accessories: - Controlled rotary table - Milling head with stepless positioning along the B-axis - Automatic tool changer with 20 magazine positions - 2x chip conveyors in longitudinal direction, ejection on the left - Coolant system - Fully enclosed - Various tools Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 1996, functionality: fully functional, Diameter x width: 750 x 1,500 mm Gedpfxeqnvtzo Agbjil max. operating pressure 300 bar Cutting force 60 kN Weight: approx. 2,800 kg 76 chisel

Condition: used, Year of construction: 2004, Technical Data: Giedpfjwglapox Agbsl Travel X/Y/Z: 650 / 500 / 450 mm Clamping surface: 1000 x 600 mm Spindle taper: SK 40 Spindle speed: 6500 rpm Max. table load: 400 kg Number of tool magazine positions: 20 Power supply: 24 kVA Machine weight, approx.: 5500 kg Equipment: - Heidenhain iTNC 530 control - Motor spindle 12000 rpm - 20-position tool changer - Heidenhain tool probe - Heidenhain workpiece probe - Heidenhain handwheel - Menzel minimum quantity lubrication system - Approx. 25 tool holders

Condition: excellent (used), machine/vehicle number: 77WSX22305E5A-135, BENZ - MONO WSX 05 - 90° angle head Mounting: HSK-A100 Collet: ER25-A (clamping range: 0.5–16 mm) Max. torque: 30 Nm Max. speed: 8,000 min⁻¹ Transmission ratio: 1:1 Gjdpfx Aox Tdhxogbeil Angle head: 360° adjustable Weight: approx. 8 kg The angle head was used on a MAG HÜLLER HILLE - NBH6+ but can also be adapted or fitted to other machines.

Condition: used, Year of construction: 1982, machine/vehicle number: 18613, KUNZMANN universal tool milling machine model UF 6 NR Giedpfx Ajiqkc Isgbjl year of manufacture 1982, 2 gear speeds 1400/2800 rpm, table size 860x240mm, 3 T-slots 14mm, spindle mounting SK30, travels: X/Y/Z=450/200/430mm, speeds horizontal: 18 steps from 32-1342 rpm, vertical: 18 steps from 72-2988 rpm, 12 feeds in X-axis, separate coolant tank, chip catcher, machine light, 3 horizontal milling arbors each with cutter, 2 top beam milling arbor bearing blocks, 1 collet element with key. 1 piece machine vice with crank

Condition: excellent (used), • Model: WIDAX WULMIX-HE LINE M68 Ø160 R16 • Mounting: SK40 DV40A SE40 050 tool holder • Diameter: Ø160 mm • Number of insert pockets: large – full set • Insert type: 058 (reusable, replaceable) • Condition: very good, teeth and body without damage, ready for use • Precisely balanced steel body • Manufacturer: WIDAX – Made in Germany • Ideal for CNC milling machines and machining centers with SK40 spindle Godpfjxmu A Dex Agbsil

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 210 x 600 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a Gijdpfjx S Ec Uox Agbjl training workshop. Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment

Condition: used, Year of construction: 1988, Control Grundig x-travel 700 mm y-travel 500 mm z-travel 400 mm weight of the machine ca. 2,8 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Gedeiqu S Espfx Agbjil

Condition: ready for operation (used), Year of construction: 2010, Universal milling machine with slotting head SHW Type UF 1 Year of manufacture: 1970 Retrofit: 2010 Table: 700 x 310 mm Travel X/Y/Z: 550/340/420 mm Spindle mount: SK 40 Gedpfx Ajx Tqzrsgbjil Spindle speeds: 46 – 2200 rpm Quill stroke: 80 mm Slotting stroke: 200 mm Feeds: 12 – 254 mm/min Weight: 2 t SK 40 tool holders Hydraulic vise Weight: 2 t Price: EUR 2,500.— plus VAT ex location

Condition: used, Year of construction: 1999, x-travel 1250 mm y-travel 850 mm z-travel 800 mm Control Heidenhain MillPlus Gijdpfx Aox R Eqvegbol

Year of construction: 1997, condition: used, x-travel 600 mm y-travel 400 mm z-travel 420 mm Control Heidenhain TNC 407 quill stroke 75 mm table surface area 900x458 mm Tool bore SK 40 DIN 2080 oder DIN 6 turning speed range - stepless 20-4500 U/min transmission ratio 3 feed stepless 1-5000 mm/min Gedpfxelp U Akj Agboil rapid motion -longitudinal/cross/vertical 7-7-6 m/min total power requirement 13 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 4x3,8x2,0 m

Condition: excellent (used), For sale: High-quality milling head by renowned brand Walter – Xtra-tec® series, designed for precision roughing and semi-finishing of metals. Premium industrial tool, ideal for CNC machining centers and conventional milling machines. • Cutting diameter: Ø65 mm • Model: F4033.B27.080.Z07.06 • Mount: SK40 / ISO40 • System: Xtra-tec® • Number of insert seats: 7 • Superior build quality – Walter German precision • Applications: face milling, machining of steel, cast iron, and alloys • Condition: used, in excellent technical condition, ready for operation The head offers outstanding performance and long service life – perfect for industrial, workshop, and production uses. Giedpjxlgnijfx Agbel

Condition: used, Year of construction: 2001, x-travel 2000 mm y-travel 920 mm z-travel 900 mm table surface area 2200 x 750 mm table load 3 t number of T-slots 6 T - slots - width 18 mm T - slots distance 120 mm spindle taper ISO 50 DIN 69871-B spindle speed max. 3000 U/min transmission ratio 1 speeds infinitely variable range 1 60 - 3000 U/min weight of the machine ca. 21,6 t feeds longditudinal/cross/vertical 0 - 5000 mm/min rapid traverse 15000 mm/min total power requirement 38 kw weight of the machine ca. 11 t Pull studs DIN69872-B | IKZ Hours: Control on: 43036 h Machine on: 41311 h Gjdpfx Agsg E Utxsbsil Program run 13894 h The machine is already dismantled

Condition: excellent (used), Year of construction: 1998, operating hours: 17,260 h, Table size: 1000 x 500 mm Tool holder: ISO 40 Travel paths: X-axis: 800 mm Y-axis: 500 mm Z-axis: 420 mm Distance between horizontal spindle axis and table: 210 – 630 mm Distance between vertical spindle nose and table: 130 – 550 mm Table load capacity: max. 500 kg Speed range: 50 - 4000 rpm Feed rate (infinitely variable): 5 - 2000 mm/min Rapid traverse in all axes: 8 m/min Vertical milling head, swiveling: ± 90° Manual quill stroke adjustment: 100 mm Drive power: 7.5 kW Dimensions (L x W x H): approx. 3000 x 2400 x 1975 mm Weight: approx. 3000 kg Accessories / Special features: • CNC contouring control HEIDENHAIN TNC 410 • Electronic handwheel HEIDENHAIN HR 410 • SIEMENS AC servo drives • Data interface V 24 / RS 232 • Swiveling vertical milling head ± 90° right & left with 100 mm quill adjustment • Hydraulic tool clamping, vertical & horizontal, ISO 40 • Swivel-away device for the vertical milling head • Very wide speed range up to 4,000 rpm • Vibration-free operation thanks to rigid and heavily ribbed cast iron guideways • Ball screws for X, Y, and Z axes • All electrical control elements on one side, in a movable control panel Gsdpfjxtu H Nex Agboil • Fixed angle table with foldable chip guard • Coolant system integrated in the machine base • Hydraulic unit • Central lubrication • CE compliant Operating hours: 17,256 Spindle hours: 3,816 Image: shows brochure photo Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Year of construction: 1989, Universal Milling Machine Horizontal - Vertical WMW Auerbach Type FW 250 x 1000 / 2 Year of manufacture: 1989 Table: 1250 x 250 mm Table load: 1250 kg Travel X/Y/Z: 700 / 400 / 500 mm Heidenhain 3-axis digital readout SK 40 Spindle speeds: 55 – 2800 rpm Feeds: 10 – 630 mm/min, stepless Vertical head Horizontal milling device Drive: 6.3 kW Weight: 2.5 t Price: EUR 2,000 – plus VAT, ex location Giodox Tqy Uepfx Agbel

Condition: used, Year of construction: 2009, x-travel 800 mm y-travel 700 mm z-travel 550 mm Control Heidenhain TNC 530 Gsdpfxox Rur As Agbjil

Condition: good (used), Year of construction: 1989, Conventional Universal Milling Machine, travel X/Y/Z 400/300/400 mm, table size 320x750xmm, 18 speed 40-2000 rpm, motor 2,2 KW, spindle ISO 40, drilling quill 60 mm, tilting head +/- 90°, dimensions 1220x1810x1710 mm, ca. 2020 kgs; accessoires: horizontal milling device, shaping head Godpfxeip N Rgo Agbjil

Condition: excellent (used), Professional milling head with SK40 mount designed for facing and roughing steel and cast iron. Model: AHSC 100-05-11. Working diameter: Ø100 mm. Maximum speed: 22,500 rpm. Number of insert seats: 4. Mount: SK40. Condition: used, fully functional – visible signs of use. Ideal for CNC machining centers and conventional milling machines, ensuring high performance and stability even at high cutting speeds. Gjdpfxjxk T Rne Agbjil

Condition: used, Year of construction: 2002, x-travel 2600 mm y-travel 1000 mm z-travel 1000 mm table-size 3.600 x 900 mm max. workpiece weight 8.000 kg no. of flutes 6 groove width 22 mm flute distance 125 spindle taper ISO 50 DIN 69871 number of spindle speeds 4.000 (2 Steps 0 - 1.000, U/min feed speeds 10 - 5.000 mm/min rapid speed 10.000 / 10.000 / 10.000 mm/min dimensions of the machine ca. 9,82 x 5,1 x 3,16 m weight of the machine ca. 21,5 t Control Engine: Spindle drive motor: 29 kW Feed drive motor Y-axis: 20 Nm, X- and Z-axis: 27 Nm Hydraulic motor: 2.2 kW Coolant pump motor: 0.50 kW Lubrication pump motor: 0.09 kW - Tool changer Gedpfx Asgvqqljgbjil

Condition: used, Year of construction: 1980, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 1,000 rpm, spindle speed (min.): 25 rpm, total height: 1,800 mm, total width: 1,300 mm, total length: 1,600 mm, table width: 250 mm, table length: 1,100 mm, overall weight: 2,400 kg, Universal Milling Machine, gear type, feed range X/Y/Z 700/250/400 mm, table size 250x1100 mm, rotary table, motor 5 KW, 12 speeds 25-1000 rpm., ISO 40, automatic and rapid feeds, horizontal/vertical milling head, collant systen, dimensions 1600x1300x1800 mm, weight ca. 2400 kg Gedpfx Agexx Tgrobsil

Condition: excellent (used), Professional milling head from the renowned brand Sandvik Coromant. Working diameter: Ø80 mm – ideal for roughing and finishing machining of steel, stainless steel, and cast iron. Mount: SK40 / ISO40. Model: 346.220242R25. Design with indexable inserts – currently equipped inserts are in good condition. High precision, rigidity, and durability – industrial-grade head for CNC machining centers and milling machines. Original Sandvik product – a leader in cutting tool technology. Condition: used, in very good technical condition – ready for immediate operation ✅ Ideal for facing, face milling, and processing large surfaces ✅ High performance and long service life thanks to high-quality inserts ✅ Premium tool – German and Swedish quality Godexld Awspfx Agboil

Condition: excellent (used), Year of construction: 2007, Universal Milling Machine, gear type, feed range X/Y/Z 500/350/400 mm, table size 800x400 mm, rotary / tilting table 600x300 mm, motor 3 KW, 18 speeds 40-2000 rpm., ISO 40, quill travel 60 mm, boring capacity Ø 40 mm, digital readout on 3 axis, automatic and rapid feeds, horizontal milling head, collant systen, halogen lamp, + round- / tilting table, dimensions 1500x1700x1750 mm, weight ca. 2200 kg; ex demonstration machine Giodpfxsfvci Ee Agbjl

Condition: excellent (used), For sale: Professional milling head from the renowned brand JEB ToolTechnic Zerspanungswerkzeuge. Model: S2138.063.R06IK Cutting diameter: Ø63 mm Mounting: SK40 Number of insert seats: 6 Condition: used, in very good technical condition, equipped with cutting inserts – ready for use. This head is ideal for machining steel and cast iron in both roughing and finishing operations. Proven in production, ensures high performance and precision milling. Giodpfjxk T N Rox Agbjl

Condition: good (used), I will sell Benz angle heads. Price given for 1 pc. - 4-40370 Godpjv Up Hwsfx Agbsil -4-40371