Used Turret Winder for sale (1,965)

Condition: used, GEWINDEROLLMASCHINEN VEB WMW GWR 80GR WITH A LOT OF TOOLS Hjdpfx Aoig Txmja Ejnp

Condition: excellent (used), Year of construction: 2023, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: L36/150, product height (max.): 25,000 mm, input voltage: 380 V, L36/150/TC/CE Years: 2023 Flexografic Printing Press 3 colours - 150 mm. width -Automatic twin turret re-winders rotating at the pre-selected tape roll length. - The operator will cut the tape, discharge the printed rolls and load the empty -380V. 50Hz 3phase Cast Iron Support Frame Hnodpfx Aewq Ay Ioa Eep MACHINE DESCRIPTION 3" i.d. frictioned un-winder for tape Noise reducer & Low Tape alarm pressure roller Corona Treatment unit - Corona Treatment proportionally adjusted on the tape speed - Ventilation & Suction system for Corona Treatment - Primer Station before printing for tape printing preparing - Ventilation & Suction system for Primer Station 3 Printing Stations complete with metal screened rollers and printing cylinders with gears for 150,7 mm print repeat -Release Station after printing - Ventilation & Suction system for Release Station -Pressure roller for Release Station - Slitting station with razor blades on the adhesive size - Twin furrets re-winders with 2 mandrels for 3" i.d. cores - Pneumatic pump for automatic Primer and Release feeding - 9 additional different cliché cylinders with gears 3 x 260 3 x 280 3x Z100 - Cliché mounting device - Set of spacers for slitting blade holders setting - 152 mm rubber roller for full coating - 50 mm. paper tab dispenser + 30.000 paper tabs - Set of spare parts + Bonus Flexo plate Machine (water based) Price: €74.000

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Hnedpfx Ajrn Sqhsa Ejp Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: good (used), working width: 850 mm, total width: 4,500 mm, total length: 14,300 mm, total height: 4,200 mm, overall weight: 10,000 kg, Equipment: CE marking, Coating and laminating line for the production of multilayer materials such as BOPP, PET, CPP, paper, and aluminum foil. Equipped with double turret unwinders and winder, coating unit, laminating unit, and electric dryers. Full specification available in the photos. Hnjdpfoyfuhlox Aa Ejp

Condition: excellent (used), Year of construction: 2011, The electricity and gas operated system enables surface treatment of plastic films by flame treatment. Hedpfx Aaevydy Ns Eenp Field of application: e.g. Reverse foils in the solar industry MAIN COMPONENTS • PSA turning roll and turret winder 2200/12 PSA W / ARW 2200/12 - Fyling Splice • Hill/Jungwirth burner unit for gas/air mixture • Suction • Erhardt + Leimer web edge control • Detect the OCS camera system for the error • Semket labeling system to identify the errors • GWK temperature control units for roller cooling SKL SP HC300 330KW

Condition: not inspected (used), Year of construction: 2006, operating hours: 28,200 h, functionality: unexamined, machine/vehicle number: R2EU3804, turning length: 310 mm, turning diameter: 220 mm, rotational speed (max.): 6,300 rpm, controller model: Siemens 810 DC powerline, Submitting a bid obligates you to collect the item on time, on July 30, 2026, at 1:00 PM! Technical data: ● Control system: Siemens 810 DC powerline Hedpfxezlfcrs Aa Ejnp ● Operating hours approx.: 28,200 ● Spindle hours approx.: 6,950 ● C-AXIS & POWERED TOOLS ● Tool holder: VDI 30 ● Number of tool positions in the turret: 12 (6 of which are powered) ● Max. bar diameter approx.: 45 mm ● Max. distance between centers approx.: 687 mm ● Max. spindle speed approx.: 6300 RPM ● Internal coolant line through the turret ● Chip conveyor ● Parts catcher ● 400 V / 50 Hz / 17 kVA ● Further technical data - see images Scope of delivery: ● Existing manuals, chip conveyor, collet chuck ● The tool holders are not included in the scope of delivery! Dimensions & weights: ● Installation dimensions L x W x H approx.: 3700 x 2000 x 2200 mm ● Weight approx.: 3500 kg

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 001-549, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Hodpfxezg Dyxo Aa Ejnp Stretch film Maximum film height: 500 mm Maximum roll diameter: 250 mm Core diameter: 76 mm Film thickness: 10–35 µm Top film Maximum roll diameter: 250 mm Core diameter: 76 mm Film thickness: 15–90 µm

Condition: used, Year of construction: 2023, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 500 mm, turning diameter: 410 mm, spindle bore: 80 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 510 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 5,000 rpm, total height: 2,145 mm, total length: 3,272 mm, total width: 2,619 mm, quill stroke: 150 mm, overall weight: 6,800 kg, swing diameter over bed slide: 580 mm, Equipment: documentation/manual, We offer this used Okuma LB3000 EX II MY CNC lathe with ARMROID Automation. Year: 2023. Control: OSP-P300LA Excellent Clean Condition, fully operational and under power. Configuration: Single spindle CNC Turning Center with Armroid Robotic Arm. Main Spindle Seed: Up to 5,000 rpm Spindle Bore / Bar Capacity: 80mm Max Turning Diameter: 410mm Hnsdpezi Ihfofx Aa Ejp Max Turning Length: 500mm Swing Over Bed: 580mm Turret: 12-station live tol turret Spindle Motor Power: 15 kW (20 HP) - (continuous) Y Axis Travel: 120mm (+70 * -50mm) Thermal Stabilization system (TAS for spindle and structure) to mitigate thermal expansion. Tail Stock Integrated Okuma robotic arm system for lights-out operation. Chip conveyor Regularly maintained and in excellent condition - last service September 2025 Byer is responsible for removal and delivery Machine can be used with or without robot loader as required making it very versatile

Condition: not inspected (used), Year of construction: 2013, functionality: unexamined, spindle speed (max.): 5,000 rpm, travel distance X-axis: 600 mm, travel distance Z-axis: 212 mm, This SPINNER CNC turning center, type TC 600 65 MC, built in 2013, will be auctioned online on our RESTLOS auction platform as part of our industrial auction "Insolvency Auction for Metalworking." Hnedpjzmdp Tjfx Aa Eop You can find this and many other machines from the metalworking sector in this auction and in regularly scheduled future auctions. Additional data for the machine: Spinner CNC turning center Type: TC 600 65 MC Year: 2013 Operating hours: unknown 16-station turret, VDI 30 mounting Control: Fanuc 31i Serial number: AT0640 Without workbench Machine has already been disconnected. We explicitly recommend a personal inspection. As shown in the pictures. Items with pallets, pallet attachments, and boxes include these as part of the respective item. Any other items or positions shown in the pictures are not included in the offer. Content, condition, and completeness are not checked. The function has not been tested.

Condition: used, Year of construction: 2005, Technical details: swing diameter: 320 mm control: 840 D SIEMENS turning speeds: 5000 1/min spindle drive: 20 / 27 kW chucking diameter: 250 mm travel -x axis: 650 mm travel -z axis: 300 mm turret head: 12 Pos. tool holder: VDI 40 toolpiece turning speed range: 4000 1/min work piece power: max. 11,7 kW weight of the machine ca.: 8 t CNC vertical lathe, live tools, C-axis, high pressure pump 20 bar, 500l, filter, flush gun, 3-jaw chuc, Hedpsmcibwjfx Aa Eonp EWAB loading station right, chipconveyor, approx. 23.500h "machine on", approx. 8.000h "spindle on" (in total) MACHINE WILL GET NEW (OVERHAULED) SPINDLE (0 hours) *

Condition: used, Year of construction: 1998, machine/vehicle number: 177054769, travel distance X-axis: 400 mm, travel distance Z-axis: 280 mm, spindle speed (max.): 3,000 rpm, turning diameter: 200 mm, feed rate X-axis: 30,000 m/min, feed rate Z-axis: 60,000 m/min, Weisser Univertor A-90L 8-position tool turret, chip conveyor, Siemens Sinumeric control system, hydraulic unit. Hedozl R Ugspfx Aa Eenp

Condition: reconditioned (used), Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely checked before delivery ----- Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment path pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser aiming light for detecting the saw section Item 2: Rounding unit horizontal below ----- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9,000 rpm > Max. tool flight circle: 130 mm > Axial adjustment path mechanically coupled with Crosscut saw > Adjustment path radial pneumatically controlled on/off Length stop NC controlled ----- > Length 3500 mm > Electronic length stop Item 3: Tenon and slot spindle ----- Hjdpfx Aovu Hghea Eenp > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 3500 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Item 4: 1. Profiling spindle (same and opposite rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Item 5: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatic opposite the spindle controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??the synchronous spindle), Rung support bar from above in the area of ??the profile milling unit vertically on the right and profiling spindle. Pos. 6: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment range 125 mm, 8 positions Pos. 7: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 110 mm, 8-way turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Item 8: Profile milling unit/grooving unit from below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > Axial adjustment range 100 mm, 8 positions > Radial adjustment range 100 mm, ...

Condition: reconditioned (used), Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Item 2: tenoning spindle ----- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool flight circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??synchronous spindle), Rung support bar from above in the area of ??profile milling unit vertical right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm Hnsdsvu Hfqjpfx Aa Eop > Axial adjustment range 30 mm, 8 positions using pneumatic turret > Radial adjustment range 125 mm, 8 positions using pneumatic turret Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 100 mm, 8 positions using pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool flight circle: 210 mm > Motor power: 3.0 kW Other features ----- > online-capable > rebating device for tear-free rebating > double parts package > return conveyor for 1-man operation: tilting belt > screen control > inclined window device > electronic angle display for inclined windows > industrial PC, PC control/NEXUS > Weinig type production program > without processing tools No original images available yet. Images show identical machines from our archive. ----- Price of the above-mentioned machine upon request! ----- Optional with additional charge: EUR 6.500,00 Note on used tools: We currently have used...

Condition: used, Control system: Siemens 3-T Faceplate: 1500 mm Max. turning diameter: 1800 mm Max. turning height: 600 mm Hodpfx Aajzl D Rhe Eenp X-axis travel: 1995 mm Z-axis travel: 750 mm Faceplate speed: 260 RPM Main motor: 66 kW Milling motor: 31 kW Milling spindle speed: 3000 RPM Tool changer: 26 positions Machine is disassembled. Many tools and spare parts included.

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 495 mm, travel distance Z-axis: 780 mm, spindle motor power: 37,000 W, spindle speed (max.): 2,000 rpm, total height: 3,636 mm, total width: 2,860 mm, controller manufacturer: FANUC, controller model: 0i-F Plus iHMI-Touch, product length (max.): 2,005 mm, number of axes: 3, This 3-axis DN SOLUTIONS PUMA V8300MR vertical turning machine was manufactured in 2023. As new, showroom model. It features a maximum turning diameter of 830 mm and a turning length of 690 mm. The machine is equipped with a powerful spindle offering 2,592 Nm of torque and a rapid traverse of 20 m/min. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA V8300MR machine we have for sale. Contact us for further details. • Condition: Showroom machine, like new • Chuck size (main spindle): 15" (380 mm) • Bar capacity: 60 mm • Rapid traverse (X/Z): 20 / 20 m/min • Spindle torque: 2,592 Nm • Max turning diameter: 830 mm • Max turning length: 690 mm • Tool stations: 12 • Tool holder: BMT 75P • Guideway type: Box guideway • Monitor size: 19" • Main features: • Powerful, very compact vertical turning center • Standing spindle; optimal crane loading and operator accessibility • Extremely rigid cast bed • High torque main spindle • Compact machine design • Optionally driven tools with high torque (possible) • High-quality, robust box guideways • Rapid traverse up to 20 m/min Additional equipment • Coolant pump, 10 bar • Oil skimmer • 3-color warning light • Optional: Chip conveyor (hinge belt conveyor). Price on request • Machine is delivered with standard basic package: Turret fully equipped, base holder included. Technical Specification Driven Tools No Hnedpfx Asyrr Rwja Ejp

Condition: excellent (used), Year of construction: 2011, Used 5-axis CNC machining center Hnsdpfxszl Ar Ds Aa Esp Manufacturer: Morbidelli Type: Universal X5 HD 36 Year of manufacture: 2011 Approx. 4800 operating hours Technical specifications: Console table 3548 x 1350 mm with manually adjustable consoles – 6 pieces, each console with 2 vacuum cups and one pneumatic ejector rail, Linear scale Laser pointer for setup, vacuum pump CNC control system: MAESTRO Main spindle 11 kW HSK 63F with C-axis, 1500 – 24,000 rpm Rapid tool changer (turret) on the y-axis support, 12-position Tool changer (20 positions) on the right and left side as a pick-up; 10 positions each Drilling head with: 12 vertical spindles, 4+2 horizontal spindles, nut saw Bumper safety system The tools, HSK tool holders, drills, etc. shown in the pictures are not included in the scope of supply!

Condition: ready for operation (used), Year of construction: 2013, operating hours: 30,959 h, spindle speed (max.): 1,750 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 600 mm, total height: 1,945 mm, total width: 1,565 mm, overall weight: 4,500 kg, controller manufacturer: FANUC, controller model: Series Oi-TD, product length (max.): 2,800 mm, number of axes: 2, Horizontal turning machine manufactured in 2013. This Leadwell T-7 features a maximum turning diameter of 350 mm and a maximum turning length of 540 mm. It includes a 12-station hydraulic turret and a spindle speed of 1,750 rpm. If you are looking to get high-quality turning capabilities, consider the Leadwell T-7 machine we have for sale. Contact us for further details. • Maximum turning diameter: 350 mm • Maximum swing over bed: 520 mm • Maximum turning length: 540 mm • Spindle nose: A2-6 • Spindle bore: 62 mm • Maximum bar capacity: 65 mm • Chuck size: 8" hydraulic chuck Hnjdpfxjzl Awgj Aa Esp • Turret: 12-station hydraulic turret • Rapid traverse (X/Z): 20–30 / 24–30 m/min • Tailstock: Hydraulic Additional equipment • Chip conveyor: Standard or optional Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,000 rpm, travel distance X-axis: 450 mm, travel distance Z-axis: 520 mm, spindle motor power: 15,000 W, controller manufacturer: OKUMA, controller model: OSP U10L, number of axes: 2, Horizontal turning machine manufactured in 2008. This Okuma ES-L10II features a maximum turning diameter of 390 mm and a maximum turning length of 500 mm. It is equipped with a 10" chuck and a robust Okuma MQ Turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma ES-L10II machine we have for sale. Contact us for further details regarding this machine. • Working capacity: • Max swing over bed: 520 mm • Max swing over cross slide: 450 mm • Max turning diameter: 390 mm • Max turning length: 500 mm • Rapid traverse: X 20 m/min, Z 25 m/min • Main spindle: • Spindle bore: 80 mm • Speed range: 50–3,000 rpm • Gear ranges: 2 automatic • Max spindle torque: 416.9 Nm • Spindle motor power: 20 kW (continuous), max power at 251 rpm • Chuck: 254 mm (10"), through‑hole Ø70 mm • Spindle nose: JIS A2-8 • Turret: • Type: Okuma MQ turret • Stations: 12 • Tool shank size: 25 × 25 mm • Boring bar capacity: Ø40 mm • Indexing time: 0.1 s per station • Clamping force: 4,000 kg • CNC control: • Okuma OSP-U10L • 10.4" TFT colour display • NC Operating Monitor • Cycle Time Reduction Function • Three-colour machine status indicator • Option included in quotation: • 15 kW high-torque spindle, 25–3,000 rpm, max torque 570.7 Nm Additional equipment • Chip conveyor • Automatic coolant system (0.25 kW) • Tool kit • Instruction and spare parts manual • Dutch operating manual Technical Specification Driven Tools No Hnjdpezl Auxofx Aa Eep Counter Spindle Yes

Condition: used, Year of construction: 2009, turning diameter max. 750 mm turning length 3.500 mm turning length Standard: 3.071 mm control Sinumerik 840 D Siemens Working height 1.300 mm x-travel 435 mm z-travel 3.071 mm max. workpiece weight between centers 2.000 kg turning speed range - main spindle 10 - 3.000 min/-1 power capacity - main spindel 61,2 / 195 kW max. Torque 779 Nm spindle head A 11 DIN 55026 spindle diameter in front bearing 180 mm Hsdpfx Aajzluhwo Eonp Spindle speed range subspindle 10 - 3.000 min/-1 power capacity - Sub spindle 73 / 233 kW max. Torque 932 Nm spindle head A 11 DIN 55026 spindle diameter in front bearing 180 mm U-axis min. -5 - max. 430 mm w-axis min. 276 - max. 3.347 mm tool taper VDI 50 number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 3.000 min -1 power capacity - driven tool-stations 9,7 kW Torque 50 / 31 Nm x-axis Y0: min. -25 - max. 410 mm x-axis Y+55: min 70 - max. 505 mm x-axis Y-55: min -120 - max. 315 mm y-axis -55 - +55 mm z-axis min. 676 - 3.747 mm tool taper VDI 50 number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 3.000 min -1 power capacity - driven tool-stations 9,7 kW Torque 50 / 31 Nm feed speeds X: 0,1 - 18.000 mm/min feed speeds Z: 0,1 - 30.000 mm/min rapid power traverse in X-and Z direction 18 / 30 m/min Feed force 15 kN total power requirement 85 kVA weight of the machine ca. 16,0 t dimensions of the machine ca. 9,0 x 4,0 x 3,3 m CNC Lathe NILES SIMMONS - N 30/3LT - 3500 - Extensive accessory package - NOT INCLUDED: Tools on the turrets!

Condition: ready for operation (used), Year of construction: 2009, operating hours: 28,580 h, spindle speed (max.): 3,250 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,050 mm, controller manufacturer: SIEMENS, controller model: ShopTurn, number of slots in tool magazine: 12, number of axes: 3, Horizontal turning machine manufactured in 2009. This DMG CTX510 ecoline features a maximum turning diameter of 465 mm and a swing diameter over the bed of 680 mm. It includes a 12-position tool turret and a spindle speed of up to 3,250 rpm. If you are looking to get high-quality turning capabilities, consider the DMG CTX510 ecoline machine we have for sale. Contact us for further details. • Maximum Turning Diameter: 465 mm Hnsdpfjzlt Amjx Aa Ejp • Swing Diameter over Bed: 680 mm • Bar Capacity: 76 mm • Spindle Speed: up to 3,250 rpm • Tool Turret: 12 Positions • Driven Tools • Kitagawa Chuck Ø 380 mm • Hydraulic Clamping System Optional, not Included: • Tailstock • Chip Conveyor • SMW Autoblok Chuck Ø 250 mm • Various Tool Holders • Boring Bars • Turning Post • Additional Tools and Accessories Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), Year of construction: 2009, functionality: fully functional, Number of axes: 2 Turning length (mm): 2000 Tailstock: MK6 Swinging diameter (mm): 500 Spindle bore (mm): 93 Manufacturer: Seiger Year of manufacture: 2009 Control system: Cycle control Heidenhain Manual PLUS 620 Control system type: CNC Total power requirement (kW): 25 kW Space requirement (mm): 3670x1850x1900 Weight (kg): 4200 Condition: Used Price, location & delivery Price and location Price: on request Location: North Rhine-Westphalia Delivery: Ex works Description – Seiger SLZ 500 E Well-maintained cycle lathe SEIGER SLZ 500 E For sale is a used but fully functional cycle lathe of the type SEIGER SLZ 500 E. The machine is in good condition, as it was reportedly only used in a single-shift operation by the previous owner. Its robust design makes it a reliable solution for flexible single-part and small-batch production. The machine is currently powered on and can be demonstrated by arrangement, so you can convince yourself of its functionality. The operating hour counter shows a value of 28483 hours. An ideal opportunity for workshops looking for a powerful and versatile lathe. Accessories and equipment – Seiger SLZ 500 E -3-jaw chuck SMW-Autoblock HI-GRIP HBF-315-102-3 -Various chuck jaws -ICP and DIN programming -Fixed steady rest -PARAT tool holder -Hydraulic unit -Steady rest, self-centering, hydraulic, from Ø 8 - 101 mm -Chip conveyor Hodpfx Aozltg Eoa Ejnp -Coolant pump -Parat 4-position turret with central coolant feed -Reinforced coolant pump -Two-speed gearbox-ZF with two stages

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 406 mm, spindle motor power: 14,900 W, number of axes: 4, This 4-axis HAAS ST-15Y was manufactured in 2020. It features a maximum spindle speed of 4000 rpm and a spindle power of 14.9 kW. The machine has a workpiece diameter over the bed of 419 mm and a maximum cutting length of 406 mm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-15Y horizontal turning machine we have for sale. Contact us for further details. • Capacities • Chuck size: 210 mm • Max part swing: 419 mm • Max cutting diameter (BOT or VDI turret): 305 mm • Max cutting length: 406 mm • Bar capacity: 64 mm • Feedrates (rapid) • X-axis: 12.0 m/min • Y-axis: 12.0 m/min • Z-axis: 30.5 m/min • Axis motors (max thrust) • X-axis: 10,676 N • Y-axis: 10,231 N • Z-axis: 16,458 N • Spindle • Spindle nose: A2-6 • Spindle bore: 88.9 mm • Max spindle torque: 203 Nm at 500 rpm Hodozlr I Iepfx Aa Eenp • Main spindle C-axis • C-axis power: 3.7 kW • Max speed: 60 rpm • Positioning accuracy: ±0.02° • Brake clamp force: 4448 N • Brake diameter: 366 mm • Brake holding torque: 190 Nm • Control: Interpolated motion and positioning • Turret and tooling • Turret: 12-station hybrid (6 VDI / 6 BOT) • Tool taper: VDI40 • Live/rotating tools: Yes, max speed 4000 rpm • Boring bar rear clearance: 19.1 mm • Tool stations: 12 • Tailstock • Type: Hydraulic tailstock • Quill travel: 95 mm • Manual body positioning: 508 mm • Thrust range: 623–5027 N • Coolant and air • Coolant capacity: 114 L • Air required: 113 L/min at 6.9 bar • Electrical • Input AC voltage (3-phase high): 440 VAC • Full load amps (3-phase high): 20 A • Full load amps (3-phase low): 40 A • Configuration notes • C-axis: Yes • Y-axis: Yes • Driven tools: Yes • Counter spindle: No Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, For Sale: WAGNER WDC 560×2000 Lathe – 2012 General Description: Hnedpfx Aaoyc Tics Eep Brand: WAGNER (Germany) Model: WDC 560×2000 Year: 2012 Type: High-precision CNC lathe Control: FANUC Oi-TD Applications: Machining of cylindrical, conical, threaded parts and large-sized components for the mechanical engineering, automotive, aerospace, or energy industries. Technical Specifications: • Maximum turning diameter: 560 mm • Maximum distance between centers: 2,000 mm • Center height: approx. 280–300 mm (to be verified per machine) • Cross travel: approx. 550 mm • Spindle: FANUC CNC, variable speed depending on configuration • Tailstock and live center: for machining of long and precise parts • Chuck: 4- or 6-jaw (depending on configuration) Equipment and Features: • FANUC Oi-TD CNC: flexible programming and automatic cycles • Cast-iron guideways for rigidity and precision • Integrated lubrication system and chip tray • Toolholder and modular turret (depending on configuration) • Possible accessories for threading, taper turning or long workpieces Dimensions and Weight: • Machine dimensions: approx. 5.5 × 2 × 2.2 m (L × W × H) • Weight: approx. 7–9 tons Key Highlights: • Large capacity: 560 mm turning diameter × 2,000 mm between centers • Reliable and widely used FANUC CNC, easy for maintenance and programming • Robust and precise machine, suited for demanding workshops

Condition: ready for operation (used), Year of construction: 2007, operating hours: 40,767 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 570 mm, total height: 1,800 mm, total width: 1,350 mm, overall weight: 2,500 kg, bar diameter (max.): 52 mm, controller manufacturer: SIEMENS, product length (max.): 2,100 mm, workpiece diameter (max.): 280 mm, number of slots in tool magazine: 12, number of axes: 3, This 3-axis SPINNER TC 52 MC was manufactured in 2007. It features a robust design with optional equipment including a bar feeder, parts catcher, and a turret with driven tools. The machine is equipped with a collet chuck for clamping and a dust extraction system for efficient operation. If you are looking to get high-quality turning capabilities, consider the SPINNER TC 52 MC horizontal turning machine we have for sale. Contact us for further details. • Number of Live Tools: 12 • Live Tool Speed: 6,000 rpm • Live Tool Torque: 23.5 Nm • Rapid Traverse X/Z: 15 / 24 m/min • Maximum Turning Diameter: 280 mm • Maximum Swing Diameter: 400 mm • Distance Between Centers: approx. 550 mm • Main Spindle Nose: A6 • Bar Capacity: 52 mm • Main Spindle Torque: 92 Nm • Coolant Tank Capacity: approx. 85 l • Coolant Pressure: 8 bar • Supply Voltage: 3/PE ~ 400 V • Collet Chuck Used for Clamping • Dust Extraction System • Supply Voltage: 3/PE ~ 400 V • Frequency: 50 / 60 Hz • Operating Current (IB): 34 A • Rated Current (IN): 35 A Hnsdszlq I Tjpfx Aa Esp • A collet chuck used for clamping • Turret with driven tools Optional equipment: • Bar feeder • Parts catcher • Chip conveyor • Tailstock Technical Specification Counter Spindle No Driven Tools Yes Taper Size VDI 30

Condition: ready for operation (used), Year of construction: 2009, operating hours: 26,180 h, spindle speed (max.): 2,500 rpm, travel distance X-axis: 360 mm, travel distance Z-axis: 980 mm, spindle motor power: 33,000 W, total height: 2,090 mm, total width: 1,980 mm, overall weight: 7,500 kg, bar diameter (max.): 110 mm, controller manufacturer: SIEMENS, product length (max.): 3,250 mm, workpiece diameter (max.): 500 mm, number of slots in tool magazine: 12, number of axes: 3, This 3-axis SPINNER TC 800 110 MC was manufactured in 2009. It features a collet chuck for clamping and includes a dust extraction system. Optional equipment includes a bar feeder, parts catcher, turret with driven tool, chip conveyor, and tailstock. If you are looking to get high-quality turning capabilities, consider the SPINNER TC 800 110 MC horizontal turning machine we have for sale. Contact us for further details. • Live Tool Speed: 4,000 rpm • Live Tool Power (100%/40%): 5 / 9.6 kW • Rapid Traverse X/Z: 15 / 24 m/min • Maximum Turning Diameter: approx. 500 mm • Maximum Swing Diameter: approx. 800 mm • Distance Between Centers: 800 mm • Main Spindle Nose: A11 • Main Spindle Power (100%/40%): 22 / 33 kW • Main Spindle Torque (Gear 1, 100%/40%): 175 / 263 Nm • Main Spindle Torque (Gear 2, 100%/40%): 700 / 1050 Nm • Coolant Tank Capacity: approx. 235 l • Hydraulic Tank Capacity: approx. 11 l • Central Lubrication Tank: approx. 2–3 l • Machine Weight: approx. 7,000–7,500 kg • Supply Voltage: 3/PE ~ 400 V • Frequency: 50 / 60 Hz • Operating Current (IB): 63 A • Rated Current (IN): 80 A Hedpozlqycjfx Aa Eonp • Collet Chuck Used for Clamping • Supply Voltage: 3/PE ~ 400 V • Frequency: 50 / 60 Hz • Operating Current (IB): 63 A • Rated Current (IN): 80 A • Collet chuck used for clamping • Dust extraction system Optional equipment: • Bar feeder • Parts catcher • Turret with driven tools • Chip conveyor • Tailstock Technical Specification Counter Spindle No Driven Tools Yes Taper Size VDI 50