Used Turret Winder for sale (2,001)

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS21, Exhibition unit ATLANTA NEOS stretch wrapper with articulated arm 99 individually storable programs Start/stop at the same position (corner counter) Wrapping height 2000 mm Mast height approx. 1500 mm (fits through almost any door and in almost any van) Powerstretch PRS 200% film (more available as an option) Motorized pre-stretch system with stepless adjustment Electronically controlled film tension via control unit IEF quick-loading system for easy film roll changes Film specifications: Max. outer diameter Ø300 mm – height = 500 mm – core Ø76 mm Automatic film cutting unit (available as an option) Film tension storable in 4 steps TECHNICAL DETAILS: Two maintenance-free 12 V – 100 Ah AGM batteries connected in series Minimum 160 pallets per Charging – Charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height “Machine with MAST (pallet included) 2,150 mm Height measurement via light sensor or dimension input on the display Protective bar for emergency stop of the drive Emergency stop switch compliant with CE regulations Acoustic warning signal and warning light at machine start Fall protection for the film carriage Push buttons for start & stop Machine function compliant with CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters adjustable via display - Display lock for program changes - Adjustable machine speed around the pallet up to 80 m/min Upward and downward carriage speeds independently adjustable - Upward carriage speed from 1.3 to 5.4 m/min - Downward carriage speed from 1.3 to 5.4 m/min - Number of wraps at the pallet base (1-10 wraps) - Number of wraps at the pallet head (1-10 wraps) - Pallet wrapping height adjustment - Film application tension for foot and head wrapping / ascending and descending, independently adjustable - Film pre-stretch for foot and head wrapping / ascending and descending, independently adjustable - Ergonomic height for film changes ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable wrapping programs for the NEOS arm - Cross wrapping (upward/downward) - Simple wrapping (upward only or downward only) - Wrapping cycle with preset start and stop height - Wrapping to a preset height (with the height sensor deactivated) - Wrapping cycle for large pallets Ijdpjz Iq Trefx Ahbjtn - Wrapping cycle for top sheet film - Soft start cycle for applying edge protection - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp edges Pallet edge wrapping Wrapping cycle with manual or motorized cord formation (optional) Further systems available immediately from our Ludwigsburg warehouse Also available with the ARYA system – automatic film application possible

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS02, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Itedpoz Irx Nsfx Ahben Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS03, LYBRA Easy OPRS / 6 Programs With automatic cord formation to reinforce the winding in various steps on the pallet. The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; Itodpfsz Ir Hasx Ahbsn – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Process Flow Continuous feeding of copper wire via an automatic double unwinder with flying splice capability Inductive wire preheating for moisture removal and improved adhesion Full insulation using a Rosendahl Automotive main extruder and a highly precise crosshead die Cooling and extraction Multi-stage, temperature-controlled telescopic water cooling trough for stress-free solidification of the plastic Synchronized precision caterpillar puller for consistent line speed Ijdpfxoz N A Npo Ahbotn Quality assurance and winding Laser diameter and ovality measurement Eccentricity measurement for monitoring consistent wall thickness High-voltage spark tester for real-time fault detection Uninterrupted winding onto process drums MACHINE DETAILS Machine type: High-speed full insulation line Design: Fully automatic system for thin-walled vehicle lines Year of manufacture: 2020 EQUIPMENT Automatic double unwinder with flying splice capability Inductive wire preheating Rosendahl Automotive main extruder Highly precise crosshead die Temperature-controlled telescopic water cooling trough Precision caterpillar puller Laser diameter and ovality measurement Eccentricity measurement High-voltage spark tester Automatic double spool winder

Condition: good (used), Year of construction: 2012, CNC Turning / Millingcenter Machine type: DMG CTX beta 500 V6 Control: Siemens 840 D Shopturn Year: 2012 Working hours: 42.067 h Spindle running time: 20.209 h SPECIFICATIONS Max. turning length: 500 mm Turningdiameter: 410 mm Max. swing over bed: 700 mm Spindle bore: 87 mm Bar capacity: 77 mm C-Axis: 0,01° Main Spindle: ISM 76 Max. revolution: 5.000 rpm Spindle power: 25 / 34 kW Torque: 280 Nm Collet chuck: Hainbuch Spantop Nova 65 Iedjz D Ug Iepfx Ahbstn Subspindle: ISM 52 Max. revolution: 5.000 rpm 3-jaw chuck: Berg KHL 200 mm Travel Y-Axis: mm Amount of turrets: 1 Tool: VDI 40 Driven Tools: 12 revolution driven tools: 4.000 drive power driven tools : 11,3 kW Equipment Chip conveyor Short Bar Loader: LNS QLS 80 S2 Direct linear scales: X,Y High pressure pumps Toggle filter Tool setter

Condition: used, Year of construction: 2005, functionality: fully functional, turning diameter over cross slide: 500 mm, turning diameter: 800 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 2,500 rpm, travel distance X-axis: 382 mm, travel distance Y-axis: 65 mm, travel distance Z-axis: 2,100 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 20 rpm, torque: 2,200 Nm, overall weight: 12,800 kg, CNC FANUC 180i with 3D software WORK AREA: Maximum turning diameter: 800 mm Turning diameter above the cross slide: 500 mm X-axis travel: 382 mm Y-axis travel: ± 65 mm Z-axis travel: 2,100 mm MAIN ELECTRIC SPINDLE: Spindle housing: 300 mm high, 5 mm Bar capacity: 121 mm Power (40/100% ED): 43/33 kW Torque (40/100% ED): 2,200/1,700 Nm Rotation speed: 20 - 2,500 rpm AXIS FEED RATES: Rapid traverse speed X/Z: 60/35 m/min Iedszuy H Depfx Ahbstn TOOL TURRET: Number of tool stations: 12+6 Number of powered tools: 12 Tool holder according to DIN 69880: 50 mm Power (40% ED): 15.7 kW Torque (40% ED): 50 Nm Rotation speed: 3,500 rpm Maximum clamping collet diameter: 26 mm TAILSTOCK: Sleeve travel: 150 mm Center mounting: CM 5 Maximum sleeve thrust: 1,800 daN Machine weight: 12,800 kg Machine complete with: -Steady rest -Set of fixed and powered tool holders -Operating manuals and CE declaration Year of manufacture: 2005

Condition: good (used), Key technical specifications: • Working height: approximately 10.30 meters. • Maximum outreach: 3.30 meters. • Load capacity (platform): 200 kg to 250 kg depending on the configuration/year. Itsdjz Ikv Tepfx Ahbsn • Total machine weight: approximately 3.28 tonnes (3,280 kg). • Dimensions (L x W x H): 2.81 m x 0.99 m x 1.99 m. • Power supply: 24V / 250 Ah electric traction battery. • Turret rotation: 350 degrees.

Condition: used, Year of construction: 2006, turning diameter 540 mm turning length 1020 mm control FANUC 18 i-TB bar diameter 65 mm travel -x axis 555 / 185 mm travel -y axis 160 mm travel -z axis 1095 mm travel -z axis (sub spindle) 1065 mm spindle speed: 5000 / 5000 1/min spindle bore 76 / 76 mm C-Axis 360 x 0,001°/360 x 0,001° turret head BMT 65P / 12 Pos. milling spindle turning speeds 10000 U/min Driven Tools 4.000 U/min b-axis 240 ° rapid traverse X-axis 24 m/min rapid traverse Z-axis 24 m/min drive capacity - spindle motor 22 / 22 kW voltage 400 V toolpiece magazine: chain magazine 40 Pos. Itsdpfez Ezrmjx Ahbsn tool taper HSK-A 63 milling drive 15 kW driven Tools 5,5 kW total power requirement 60 kVA weight of the machine ca. 12,5 t dimensions of the machine ca. 4,30 x 2,30 x 2,90 m

Condition: new, Year of construction: 2025, For sale: brand new / unused ZEISS Primovert inverted phase contrast microscope, supplied as a complete factory-configured kit in the original ZEISS packaging. This is one of 5 identical new Primovert units available. The complete configuration includes: ZEISS Primovert microscope stand, ref. 415510-1100-000 - Binocular tube - 4-position objective turret - Specimen stage 200 x 239 mm with metal stage insert - Binocular tube 45°/20 - Eyepieces 10x/20 Br. foc. - External power supply 100-240 VAC / 50-60 Hz - Dust cover - Original accessories and documentation ZEISS LD Condenser 0.4, ref. 415510-1700-000 - Working distance 55 mm - Suitable for objective magnifications of 4x to 40x Objectives included: ZEISS Plan-Achromat 4x/0.10 Ph0 Ref. 415500-1619-000 Working distance 12.0 mm ZEISS Plan-Achromat 10x/0.25 Ph1 Ref. 415500-1605-001 Working distance 4.4 mm ZEISS LD Plan-Achromat 20x/0.30 Ph1 Ijdpfx Aoz E A Hfohbetn Ref. 415500-1614-000 Working distance 4.6 mm at D=1 mm ZEISS LD Plan-Achromat 40x/0.50 Ph1 Ref. 415500-1617-000 Working distance 2.7 mm at D=1 mm Phase contrast components included: Phase annulus Ph 0/0.4, ref. 415510-1810-000 Phase annulus Ph 1/0.4, ref. 415510-1811-000 3-position phase slider, ref. 415510-1805-000 Also included: ZEISS LED illumination for Primovert Ref. 415510-1201-001 Condition: New / unused The microscope is supplied in its original ZEISS box with original protective foam, documentation, and accessories. The unit has not been used in a laboratory setting. 5 identical units available. Available immediately from stock in Belgium. Worldwide shipping available. Please contact us for additional information, pictures, shipping quotation, or a formal offer.

Condition: excellent (used), Year of construction: 1997, Manufacturer: Nakamura-Tome Model: TMC-18 Machine type: CNC turning center Control: FANUC Max. turning diameter: 280 mm Max. turning length: 285 mm Swing diameter: 400 mm Bar capacity: 51 mm Spindle bore: 65 mm Spindle nose: A2-6 Spindle speed: 90–3,000 rpm / optional up to 4,500 rpm Spindle power: 5.5 kW / optional 7.5 kW Isdpfx Asz E Hv Rjhbetn X-axis travel: 162.5 mm Z-axis travel: 320 mm Rapid traverse X: 16 m/min Rapid traverse Z: 24 m/min Tool turret: 10 stations Chuck size: 215 mm / approx. 8" Coolant tank: 90 l Dimensions (L × W × H): approx. 1,645 × 1,453 × 1,625 mm Weight: approx. 2,400 kg Connection: 200 V / 50 Hz / 3-phase Connected power: 27 kVA

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 5,800 h, fuel type: diesel, Equipment: all wheel drive, Diesel All-Wheel Drive Articulating Boom Lift GENIE Z 45/25 Ijdpfx Ahez Iv Hwebetn Year of manufacture: 2008 According to meter reading: 5,800 hours 🏗️ Performance Data & Working Range • Maximum working height: 15.70 m to 15.97 m (Model J with basket boom reaches up to 16.05 m) • Maximum platform height: 13.90 m to 14.05 m • Maximum lateral reach: 7.50 m to 7.52 m (Model J with basket boom up to 7.65 m) • Maximum lifting capacity: 227 kg (approved for 2 people + tools) • Turret swivel range: 359° (not continuous) • Platform rotation: 180° hydraulic (160° on models with basket boom) 📐 Dimensions & Weight • Transport length: approx. 5.56 m (Model J with folded basket boom approx. 6.65 m to 6.83 m) • Transport width: 2.29 m (with standard off-road tires) • Transport height: 2.11 m to 2.13 m • Wheelbase: 2.03 m • Ground clearance: approx. 18 cm to 24 cm • Operating weight (4x4 RT): approx. 6,078 kg to 6,460 kg (depending on tire filling, e.g. foam-filled) ⚙️ Drive & Off-Road Capability (4x4) • Drive type: All-wheel drive (4x4 / RT = Rough Terrain) with diesel engine (usually Deutz or Perkins) • Maximum gradeability: 45% (in retracted position) • Travel speed (retracted): up to 7.7 km/h • Travel speed (elevated): approx. 1.0 km/h • Tires: 14-17.5 / Off-road profile (often foam-filled to prevent punctures) • Fuel tank capacity: approx. 54 to 64.4 liters • Hydraulic tank capacity: approx. 83 to 95 liters - Immediately ready for operation in original condition! - Upon request, a new Austrian inspection certificate can be provided before delivery! Selling price: €13,900 net Affordable delivery also possible!

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 4,000 rpm, travel distance X-axis: 225 mm, travel distance Z-axis: 680 mm, spindle motor power: 26,000 W, total height: 2,000 mm, total width: 2,050 mm, overall weight: 6,600 kg, product length (max.): 2,800 mm, number of axes: 3, This 3-axis Mazak QT NEXUS 300 was manufactured in 2009. It features a maximum cutting diameter of 420 mm and a maximum swing of 680 mm. The machine is equipped with a drum turret with 12 stations and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak QT NEXUS 300 horizontal turning machine we have for sale. Contact us for further details. Itsdpfjz Eavwsx Ahbjn • CNC: Mazatrol Fusion 640T Nexus (8.4" color LCD) • CE marked • Capacity • Max bar diameter: 77 mm • Max cutting diameter: 420 mm • Max swing: 680 mm • Spindle bore: 88 mm • Spindle center height: 1,080 mm • Max chuck workpiece weight: 450 kg • Main spindle • Max spindle torque: 600 Nm • Spindle nose: A2-8 • Chuck: 10" through-hole, type B210A815X • Axes • Cutting feedrate: X 8 m/min, Z 8 m/min • Rapid traverse: X 30 m/min, Z 25 m/min • Turret • Type: Drum turret • Stations: 12 • Turning tool shank: 25 × 25 mm • Indexing time: 0.8 s (½ turn), 0.2 s (single step) • Tailstock • Programmable, motor-driven movement • Stroke: 645 mm • Taper: No. 5 • Dead centre included • Live centre: NSK LC-5SW (speed up to 4,000 rpm) • Thrust selection: 10 levels • Control equipment and functions • Mazatrol Fusion 640T Nexus • Interfaces: RS-232C, Network • Background tool-path check • Machining Navigation – Prediction / Monitor / Results • Velocity and feedrate control • Tool path storage • 3.5" FDD unit • Coolant / machine equipment • Complete coolant system (tank 210 L, pump 520 W) • Preparation for side chip conveyor • Automatic tool eye • Hydraulic chuck pressure interlock • Chuck open/close confirmation • Double foot switch • Full chip and coolant guarding • Work light • Electrical • Power requirement (30 min rating): 49.69 kVA • Continuous power requirement: 43.83 kVA Additional equipment • European-market power transformer • Foundation plates • One set of adjusting tools • Manuals included Technical Specification Driven Tools No Counter Spindle No

Condition: used, Year of construction: 2004, Overview This Robino & Galandrino ZENITH Z 2/16 OTTICO is a rotary capsuling machine for sparkling wine bottles, built in 2004. It places and crimps capsules onto 750 ml glass bottles, with optical spotting so that a printed capsule is aligned to the bottle before crimping. The machine is laid out as a two-turret unit: a capsule distributor turret feeding a 16-head rotary crimping turret, rated at 12,000 bottles per hour. It is still installed and under power, remains in production until end of January 2027, and can be visited in operation on request. Technical data Itodpfxoz Dtnde Ahbjn - Manufacturer: Robino & Galandrino - Model: ZENITH Z 2/16 OTTICO - Year of manufacture: 2004 - Machine type: rotary capsuling machine for sparkling wine bottles - Configuration: 2 turrets, 16 crimping heads - Capsule spotting: optical - Capacity: 12,000 bottles per hour - Container: glass, 750 ml sparkling wine bottles - CE marked Equipment - Automatic capsule magazine with inclined slat elevator feed - Optical spotting station for pre-printed capsules - Full safety enclosure with transparent doors and emergency stops - Bottle infeed and discharge handling with star wheels and guide rails Condition Used - still installed and under power, in production at the current site. Availability From end of January 2027. Location: France. Sold EXW; dismantling, handling and truck loading are not included.

Condition: like new (used), Year of construction: 2019, operating hours: 3,500 h, functionality: fully functional, bar passage: 117 mm, overall weight: 8,500 kg, The Hyundai WIA L400MC is in like-new condition. Inspection under power is possible at any time. Model: Hyundai WIA L400MC Design: Standard Bore Swinging diameter over bed: Ø 780 mm Swinging diameter over slide: Ø 535 mm Itjdpfsz Ibaiox Ahbjn Max. turning diameter: Ø 560 mm Max. turning length: 1,180 mm Bar capacity: Ø 117 mm Chuck size: Ø 381 mm (15") Max. spindle speed: 2,000 rpm Spindle motor power (max./continuous): 37 / 30 kW Spindle torque (max./continuous): 3,073 / 2,490 Nm Spindle drive: Belt drive with 2-speed gearbox Spindle taper: A2-11 C-axis: 0.001° Travel distances X-axis: 320 mm Z-axis: 1,200 mm Rapid traverse X/Z: 20 / 25 m/min Guideways X/Z: Box guide / Flat guideways Number of tool stations: 12 Tool holder, outer diameter (OD): □ 32 mm Tool holder, inner diameter (ID): Ø 63 mm Turret indexing time: 0.2 s Mount: BMT75P Driven tools Motor power (max./continuous): 7.5 / 5.5 kW Max. speed: 4,000 rpm Torque (max./continuous): 44.7 / 35 Nm Collet size: Ø 26 mm (ER40) Tailstock Tailstock taper: MK5 (integrated) Quill diameter: Ø 150 mm Quill stroke: 132 mm Tailstock travel: 1,100 mm Additional technical data Coolant tank: 300 liters Lubricant tank: 2 liters Electrical connection: 46 kVA Recommended cable cross-section: > 50 mm² Voltage / Frequency: 220 V / 60 Hz or 200 V / 50 Hz Footprint (L x W): 4,202 x 2,207 mm Machine height: 2,153 mm Machine weight: approx. 8,500 kg Control: HYUNDAI WIA FANUC i Series / FANUC 32i-B

Condition: excellent (used), Year of construction: 2003, Siemens 840D control system Turning diameter 254 mm Turning length 500 mm Chuck diameter 210 mm Turning length 410 mm Itjdpfxoz Hfqis Ahben Spindle speed 4,500 rpm 8-position turret Chip conveyor

Condition: good (used), Year of construction: 2014, functionality: fully functional, CNC-controlled lathe with powered tools, chip conveyor, automatic tool measuring system, chip evacuation conveyor, and bar feeder. Put into operation 11/2014 Control system OSP-P300L CNC with a 15" color touchscreen Machine hours: Power-on time: 65,458 hours as of 03/18/2026, NC operating time: 36,054 hours Spindle rotation time: 19,533 hours Cutting time: 16,582 hours And increasing. Power consumption 33.1 kVA Technical data Max. swing diameter 480 mm (approx. based on the current chip conveyor design) Max. machining diameter 340 mm Max. turning length 785 mm Collet chuck + 10" hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) Hydraulic through-bore cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 interface, 80 mm bore, integrated motor Speed range 45 - 5,000 rpm Power/continuous operation 22 kW/15 kW Continuously controlled C-axis, 3600 with 0.001° increment Sub-spindle Speed range 50 – 6,000 rpm Power/continuous operation 11 kW/7.5 kW Spindle with 140 mm interface, 62 mm bore, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet chuck + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) Hydraulic through-bore cylinder SS1243, draw tube Sub-spindle travel - NC axis W travel for W450: 595 mm Spring-loaded part ejector from the sub-spindle Overload protection for W-axis (drive torque) Tailstock mounting in the sub-spindle Turret Number of tool positions 12, both fixed and powered BMT60 (not VDI) Tool mounting in. 25 x 25 mm Tool mounting out. diameter 40 mm Powered tools Drive power 7.1/4.1 kW Speed range 45 – 6,000 rpm Feed speeds Rapid traverse in X and Z axes 25/30 m/min Rapid traverse in C axis 200 rpm Travels X-axis 260 mm Z-axis 510 mm Y-axis 115 mm (+70 mm / -45 mm) Machine data Width 3330 mm – without bar feeder and chip conveyor Depth 1800 mm Height 2250 mm Machine weight 5,250 kg Accessories: OSP-P300L Advanced One Touch CF-M-E package including: Coordinate transformation function Profile generation function Advanced One Touch IGF 3D machining process simulation Cutting time overrun check Load monitoring (spindle, feed axes) NC operation monitoring (including part counting) Function for reducing cycle time Hi-Cut Pro function Spindle speed control function High-pressure coolant, max. 20 bar, max. 50 l/min Bar feeder ILS type MUK 7012, with bar magazine 6-70 mm/1250 mm, year of manufacture 05/2014, manufacturer Kurt Breuning – IRCO Maschinenbau GmbH, Steinenbronn. FILTERMIST FX4002 extraction unit Equipment for the machine: Collet chuck: SMW AUTOBLOK: KSZ-DZN-065-A06 201342 (currently on the main spindle) Collets diameter (mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -29-30 31-32-34-35-36-38-39-40-41-42-44-45-46-48-50-51-53-55-57-60-64-6 5 Itjdpfoz Hk R Uex Ahben Grooved collets diameter (mm) 55-60-65 Collet chuck: SMW AUTOBLOK: KSZ-DZN-042 Z140 205073 (currently on the sub-spindle) Collets diameter (mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -30 31-32-34-35-36-39-38-40-41 Tool holders: Axial holder - 5X Tool holder, turning - 5x Tool holder, boring bar - 2x Front-end drive, double-sided - 3x Front-end drive, side - 3x Reduction sleeve (manufactured from stock material) Reduction - nylon diameter (mm): 12-14-15.5-17-20-22-24-26-28-30-31-34-36-38-40-42-44-47-50-52 The machine is regularly serviced.

Condition: used, Technical details: max. turning diameter: 320 mm Ijdpsz Ig Swofx Ahbstn turning length: 1040 mm control: OSP E 100 L Dialog Fanuc greates pass round over bed: 530 mm standard turning dia.: 350 Max. distance between centres: 1200 mm max. workpiecediameter: 525 mm Traverse X-Axis 1: 500 Traverse X-Axis 2: 350 mm Traverse Y-Axis 1: 160 (+80/-80) mm Traverse Z-Axis 1: 1200 mm Traverse Z-Axis 2: 1200 mm Spindle 1 Power: 22 kW Spindle 1 RPM: 3800 1/min spindle nose: JIS A2-8 spindle bore: 80 mm bar material dia.: 65 mm C-Axis: 0,001° Number of Turrets: 2 Turret No.1 stations / rotary tools: 12/12 Turret 1 tool RPM: 4500 1/min Turret No.2 stations / rotary tools: 12/12 rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 25 m/min total power requirement: 33 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 6,0 x 2,5x 2,3 m High pressure coolant system: INterlit 8/20 bar Accerories Chip conveyor part counter total counter tool setting Signal lamp 3 colors spindle load monitor B Spindle 1 Chuck SMW 300 mm CNC Turning-and Milling Center The Okuma LT 300 MY has 2 turrets, the upper turret has Y-axis with milling function, the lower turret has milling function. It has main- and subspindle. This allows synchronized machining using 2 turrets. There is an Interlit paperfilter/high pressuire system with the machine with coolant cooler. There are 7 identical machines available, all in very good and well maintained condition. *

Condition: used, Year of construction: 2012, swing diameter 560 mm turning length 800 mm control C200-4D Siemens 840 D spindle head 8 DIN 55026/55021 ISO 7027/1 bar capacity 90 mm spindle diameter in front bearing 140 mm turning speed range - spindle ~ 3.500 U/min drive capacity - spindle motor 100% / 40%: 43 / 57 kW Torque 275 / 363 Nm Indexing 2,5 ° C-Axis 0,001 ° Number of Turrets 1 number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 11 kW tool taper 40 x 63 mm DIN 69880 Torque 21,5 Nm travel -x axis 300 mm travel -z axis 800 mm rapid traverse X/Z: 30 / 22,5 m/min feed power X: 7.200 N feed power Z: 9.000 N Iodjx Emp Nopfx Ahbotn dia. of quill 65 mm Cone SK 30 longitudinal travel 800 mm rapid traverse 10 m/min total power requirement 51 kVA weight of the machine ca. ca. 14 t dimensions of the machine ca. 7,3 x 4,0 x 2,6 m CNC Turning- and Milling Center INDEX - G 250 - Precision package for main or counter spindle - Selected spindle housing - Bearingless clamping cylinder - Precision balancing of work spindle, clamping cylinder, and collet clamping

Condition: ready for operation (used), Year of construction: 2005, operating hours: 53,201 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 1,585 mm, controller manufacturer: SIEMENS, tool weight: 10,000 g, number of axes: 7, This 7-axis Gildemeister GMX 400 Linear was manufactured in 2005. It features a maximum turning diameter of 640 mm and a turning length of 1585 mm. The machine is equipped with a Siemens Sinumerik 840D Powerline CNC control and offers rapid traverse speeds of 40 m/min in the X-axis. If you are looking to get high-quality turning and milling capabilities, consider the Gildemeister GMX 400 Linear turn-mill centre we have for sale. Contact us for further details. • B-axis swivel range: ±120° • C-axis resolution: 0.001° • Rapid traverse (X/Y/Z): 40 / 24 / 60 m/min • Maximum turning diameter: 640 mm • Standard turning diameter: approx. 400 mm • Maximum turning length: 1585 mm • Bar capacity: approx. 90–92 mm • Chuck diameter: 250 mm • Counter spindle speed: 4000 rpm • Maximum torque: approx. 600–730 Nm • Milling spindle: Integrated motor spindle (ISM) with B-axis • Milling spindle speed: 12,000 rpm • Milling spindle power: 13.2 / 22 kW • Milling spindle max. torque: approx. 100 Nm • Turret: 12-position driven turret • Tool shank: 40 mm, DIN 69880 • Tool length limits: 200–350 mm • Maximum tool diameter: 80–140 mm • Maximum tool projection: 60–70 mm • Connected load: 100 kVA • Additional notes: Linear drive technology; Made in Germany; Machine under power and available for inspection Technical Specification Counter Spindle Yes Driven Tools Yes Itjdpfx Asy Uvxxehbsn

Condition: like new (used), functionality: fully functional, Year of construction: 2018, MACCHI COEXTRUSION LINE FOR 7-LAYER EVOH BLOWN FILM Complete line for the production of 7-layer EVOH blown film 4 Macchi extruders with 65 mm screw diameter 3 Macchi extruders with 55 mm screw diameter Innoplast gravimetric dosing units 7-layer die head, 450 mm diameter with IBC, 2.4 mm GAP K-Design cooling ring Double thickness control IR+XRay Maximum width 2400 mm Calibration basket Rotating haul-off Cason corona treater Macchi BO-Plus double back-to-back automatic winder Web guide Iedpfey Nk Hajx Ahbstn Year 2018

Condition: used, Brand : CMZ Model : TBI 520 MC Cnc : FANUC 18i-TB with Manual guide Yom : 2005 Itsdpfx Aezczacjhbon Distance between centres: 1.100 mm Swing over bed: 520 mm Ø Max. Turning: 420 mm X Travel X : 296 mm Z Travel : 1090 mm Rapid Feeds (X, Z Axis): 18 m/min Rapid Feeds (Z Axis): 24 m/min Max Speed of the Head: 3000 rpm Spindle Bar Diameter: 82 mm Chuck Bore Ø: 95 mm Spindle Max. Power : 22 kw Number turret positions; 12 (VDI-50) Number positions of Driven tools 12 Driven Tools Speed 4000 rpm Max Power Driven Tools 8,5 kw C Axis and Driven Tools INCLUDED Hydraulic Steady Rest installation: INCLUDED Tool Presetter INCLUDED 2 Axial Driven Tool Holders INCLUDED 2 Radial Driven Tool Holders INCLUDED Installed Power 50 KVA Equipped with chip conveyor

Condition: used, Year of construction: 2001, turning diameter 280 mm turning length 400 mm control Fanuc 18 T Ijdpfx Aoyxr Hgohbstn spindle bore diameter 51 mm number of controlled axis 2 turning speed range 0 - 4000 U/min rapid speed 30 m/min number of tapers in turret head 12 VDI 40 tail stock Ja dimensions 3,9 x 1,6 x 2,1 m weight of the machine ca. 3,9 t power requirement 15 kW Used CNC- Lahte with box way, 2 axis - 3 jaw chuck Ø 200 mm - chip conveyor - oil dust collector

Condition: good (used), Year of construction: 2016, functionality: fully functional, turning length: 669 mm, turning diameter: 330 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 762 mm, bar passage: 75 mm, CNC control Sinumerik 828D 12-fold revolver Sauter VDI40 driven tools C-axis 3-jaw chuck and collet chuck device Tool Eye part catcher chip conveyor tail stock coolant device with high pressure pump bar loading device Iemca Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 600 mm max. Drehdurchmesser / max. turning diameter 330 mm Itjdeyt Hp Dopfx Ahbsn max. Drehlänge / max. turning length 669 mm X-Weg / X-travel 260 mm Z-Weg / Z-travel 762 mm Drehzahl / spindle speed 3400 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes max. Stangendurchmesser / max. bar diameter 75 mm Eilgang X / rapid feed X 20 m/min Eilgang Z / rapid feed Z 24 m/min. Gewicht der Maschine ca. / weight ca. 5700 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 389 h, spindle speed (max.): 2,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, spindle motor power: 30,000 W, total height: 1,915 mm, total width: 2,035 mm, overall weight: 5,650 kg, product length (max.): 3,821 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D control touchscreen with ShopTurn 15-inch display • 3-axis CNC horizontal turning machine with driven tools and tailstock • C-axis main spindle: 360° resolution 0.001° • C-axis speed: 200 rpm • C-axis torque: approx. 1162 Nm • Swing diameter over bed: 720 mm • Swing diameter over cross slide: 590 mm • Max turning diameter: 376 mm • Max turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Max torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N • Three-jaw power chuck diameter: 305 mm with soft jaws • 12-station tool turret with BMT65P tool holders • Max driven tool speed: 5000 rpm • Driven tool power: approx. 7.7 kW • Driven tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite construction • 30° slant bed design • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters Itedpfxjy E I Hio Ahbsn • Full enclosure with working area lighting • Bar feeder interface • Oil skimmer • Electronic safety clutch for X and Z axes • Electrical connection: 400 V, 3-phase, 50 Hz • Total power: approx. 47 kVA • Unused (like new) • OPTIONAL: HALTER LoadAssistant Universal Big 70 (Robot) • Gripper for Doosan Universal Big 70 • Rotation Station • Workpiece Support • Base Plate 23 mm / 175 mm Big 70 • Machine Interface Box • () Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2006, operating hours: 38,407 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 650 mm, spindle motor power: 26,000 W, total height: 2,900 mm, total width: 2,500 mm, overall weight: 12,000 kg, controller manufacturer: SIEMENS, controller model: 840 Powerline, product length (max.): 7,855 mm, number of slots in tool magazine: 24, number of axes: 3, This 9-axis Gildemeister TWIN 65 was manufactured in 2006. It features a spindle power of 65 kVA and a maximum spindle speed of 5000 rpm. The machine includes a tool magazine with 24 tools and a turret-type tool changer. With a robust weight of 12,000 kg and dimensions of 7855 mm x 2500 mm x 2900 mm, this horizontal turning machine is equipped with special features like a touch probe and internal coolant supply. If you are looking to get high-quality turning capabilities, consider the Gildemeister TWIN 65 machine we have for sale. Contact us for further details. • 2 units available, identical machine • Machine design: 60° slant bed • Guideways: Roller guideways • Max turning diameter: 250 mm • Max turning diameter (standard): 120 mm • Max turning length: 900 mm • X1 travel (upper slide): 300 mm • Z1 travel (upper slide): 650 mm • Y1 travel (optional): ±40 mm • X2 travel (lower slide): 180 mm • Z2 travel (lower slide): 650 mm • X3 travel (counter spindle): 175 mm • Z3 travel (counter spindle): 670 mm • Main spindle chuck size: 175 / 200 mm • Maximum rod diameter (without reducing tubes): 62 / 65 mm • Spindle bore diameter: 79 mm • Spindle nose diameter: 170 mm • Collet diameter: 66 mm • Front bearing diameter: 120 mm • Main spindle power (40/100% ED): 35 / 25 kW • Main spindle speed range: up to 5000 rpm • Main spindle torque (40/100% ED): 370 / 270 Nm • Spindle drive type: AC motor with integrated spindle motor • C-axis: Integrated for oriented stopping and contouring • C-axis speed: 2000 rpm • C-axis holding torque: 270 Nm • Counter spindle power (40/100% ED): 26 / 21 kW • Counter spindle speed range: up to 5000 rpm • Counter spindle torque (40/100% ED): 290 / 230 Nm • C-axis (counter spindle) speed: 2000 rpm • C-axis (counter spindle) holding torque: 230 Nm • Rapid traverse X/Z (slide 1): 30 / 30 m/min • Feed force X/Z (slide 1): 4.0 / 7.0 kN • Positioning resolution X/Z: 0.0005 mm • Motor torque X/Z: 6 / 10.5 Nm • Motor speed X/Z: 3000 rpm • Ball screw pitch X/Z: 20x32 / 20x40 mm • Rapid traverse X/Y/Z (with Y-axis): 30 / 15 / 30 m/min • Feed force X/Y/Z: 4.0 / 4.0 / 7.0 kN • Positioning resolution X/Y/Z: 0.0005 mm • Motor torque X/Y/Z: 6 / 6 / 10.5 Nm • Motor speed X/Y/Z: 3000 rpm Itjdpfx Aeyvz Ibehbsn • Ball screw pitch X/Y/Z: 20x32 / 10x32 / 20x40 mm • Rapid traverse X/Z (slide 2): 30 / 30 m/min • Feed force X/Z (slide 2): 4.0 / 7.0 kN • Positioning resolution X/Z (slide 2): 0.0005 mm • Motor torque X/Z (slide 2): 6 / 10.5 Nm • Motor speed X/Z (slide 2): 3000 rpm • Ball screw pitch X/Z (slide 2): 20x32 / 20x40 mm • Rapid traverse X/Z (counter spindle slide): 15 / 30 m/min • Feed force X/Z (counter spindle slide): 4.0 / 7.0 kN • Positioning resolution X/Z (counter spindle): 0.0005 mm • Motor torque X/Z (counter spindle): 10.5 / 10.5 Nm • Motor speed X/Z (counter spindle): 3000 rpm • Ball screw pitch X/Z (counter spindle): 10x32 / 20x40 mm • Number of tool stations: 12 • Tool holder: VDI 30 • Tool changer type: Turret • Tool shank size (DIN 69880): 30 / 40 mm • Number of driven tool stations: 12 • Driven tools: all 12 stations capable of driven tools • Driven tool power (40/100% ED): 11.7 / 8.4 kW • Driven tool torque (40/100% ED): 28 / 20 Nm • Driven tool speed: up to 4000 rpm • Tailstock stroke (optional): 300 mm • Tailstock force: 150 / 630 daN • Center size: MK 4 • Hydraulic tank capacity: 20 l • Hydraulic pump power: 2.2 kW • Hydraulic pressure max: 90 bar • Clamping pressure main spindle: 80 bar • Clamping pressure counter spindle: 70 bar