Used Turret Winder for sale (2,166)

Condition: used, VTL SC 17 CC Vertical Turret Lathe Tjdpfexdcxuex Af Tsf Specification: Faceplate diameter: 1450 mm Swing diameter: 1700 mm Turning height: 1200 mm Weight of the machine ca.: 22 t

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS04, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Tedewtc Drjpfx Af Tef Other systems available immediately from the Ludwigsburg warehouse

Condition: new, Year of construction: 2024, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SCR 44 2SF, Vertical Turning center SCR 44 – 2SF - Tech data Nominal Turning Envelope Faceplate Diameter 4.000 Machining Diameter 4.400 mm Machining Heights 2.000 mm Work Piece Weight 16,000 kg Nominal Travels X-Axis Rams Carriage 2,500 mm W-Axis Elevating Cross Rail 1,200 mm Indexing step 300 mm Z-Axis Ram vertical travel 1,250 mm Work Table WorkTable Diameter 4.000 mm WorkTable Speed 1 - 60(90) rpm Power Continuous S1 100 kW Torque Continuous S1 110,000 Nm WorkTable C axis 0.02 to 1.5 rpm Power Continuous S1 11 kW C axis Torque Continuous S1 55,000 Nm Locking Table Torque 80,000 Nm Z-Axis Milling Ram Ram Size Turning Milling 250 X 250 mm Turning / MillingTool type KM 63 - ISO 50 DIN 69871 Ram Milling Capability Ram Speed 0 to 2,500 rpm Power Continuous S1 40 kW Torque Continuous S1 1.400 Nm Toolchanger Number Of Tool Magazines 2 X ATC for 12 turning / milling tools Tool Storage 24 Axes Drives X1,2-Axes horizontal axis Power Continuous S1 5.5 kW Thrust Continuous S1 50,000 N Z-Axis Ram Power Continuous S1 5.5 kW Thrust Continuous S1 50,000 N W-Axis Cross-Rail vertical movement Power Continuous S1 11 kW Axes Rates X1,2 And Z1,2-Axes Feed Rates 0.02 to 10,000 mm/min W-Axis Elevating Rate 400 mm/min Coolant System Coolant Tank Capacity 2,000 L Coolant Pressure / Flow Rate: -internal coolant (milling) -external coolant (turning) Filtration unit: -type -filtration size 40 bar at 40 LPM 5 bar at 100 LPM Cartridge type 25 µm Horizontal Drilling Head For inside and outside drilling operations. Maximum speed 3.000 rpm Power 42 kW Toolholder tape ISO 50 DIN 69871 CNC Control -producer Sinumerik 840 Dsl Siemens Accuracy Tsdeg Uwmqjpfx Af Tsf Positioning: X ±0.010 mm / m Z ±0.010 mm /m C ±3 arcsec Repeatability: X 0.020 mm Z 0.020 mm Overall dimensions Length x Width x Height 11,000 x 6,600 x 7,500 mm Weight 79.000 kg Minimum Fused Disconnect 140 KVA

Year of construction: 2009, condition: excellent (used), SEWER RONDO CROISSAUNT WINDER Croissaunt winder Top condition ready for immediate use Todpsd E Hvkofx Af Tef Table machine

Condition: like new (used), Year of construction: 2001, AMADA EUROPE 245 turret press Technical data : - CNC control : FANUC 18 i-P - pressure : 20 Ton - max. punching format without interceptor and with 31 station head : 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - max. size of punched sheet with interceptor : 1020 x 2540 mm - max. size of punched sheet with capture + 1 turn (optional) : 1500 x 2540 mm - max. sheet thickness on ball table : 6 mm - max. thickness of sheet on brush table : 3 mm - max. permissible weight on table : 100 kg - punching accuracy : +-0.1 mm - positioning accuracy : +-0,07 mm - number of pneumatic clamps/grips : 2 - number of axes controlled simultaneously : 3: X, Y, C - turret speed : 25 rpm. - number of strokes per min, distance 25.4 mm, cylinder stroke 6.5 mm : 220 strokes/min. - stroke punching, distance 1 mm, cylinder stroke 6.5 mm : 480 strokes/min. - minimum programmable increment : 0.001 mm - number of tool stations - 31, including 3 rotary ones - max. tool diameter : 88,9 mm - rotary stations : 2x1 1/4"; 1x2" - max. sheet thickness for rotary station : 3 mm - slider : hydraulic - bottom feed feed turning point : 4 programmable points - working table : X=600, Y=400 - memory capacity : 64 (~63 programs) Kb - graphic screen : 10,4" LCD - stop time : 295 ms - air pressure : 5 kg/cm2 (bar) - air volume : 250 Nl/mn - oil amount : 160 L - light curtain (3 beams) : standard in European countries - installed power : 27 kW - machine dimensions : L=4460 mm, l=2750 mm, h=2130 mm - transport dimensions : L=4820 mm, l=2500 mm, h=2414 mm - weight of punching machine AMADA EUROPE 245 : 10 000 kg - time worked : 35 000 working hours Production 2000.12 , installation 2001 1 szy owner , service book with full history of the machine, machine in perfect condition, worked on thin sheets Start-up warranty Training on operation included in the price. Tjdohvaaaspfx Af Tsf Contact person : Robert 500114006 Greetings

Condition: used, Year of construction: 1992, faceplate diameter 1120 mm swing diameter 1250 mm turning height 1000 mm workpiece weight 4000 kg faceplate speeds from - to 1,25-315 U/min cross travel of ram-slide 775 mm vertical head swivelling 45 Grad ram stroke - vertical 700 mm feeds 5,45 - 2000 mm/min total power requirement 30 kW weight of the machine ca. 18 t dimensions of the machine ca. 2,7 x 2,9 x 4,1 m Tedpfx Ajv Anlhsf Tsf Machine was modernized and overhauled in 2014 for an amount of more than 100.000,- Euro and does have a digital positioning control.

Condition: used, Year of construction: 2014, Overview This palletizing and winding line consists of an Ocme  palletizer and two Robopac Genesis stretch wrapping machines, both manufactured in 2014. The line was designed for handling shrink containers and is in good condition. It is suitable for palletizing and wrapping multiple pallet formats and offers a production output of 30,000 bottles per hour, depending on the format. The grouping of the layer formation is done by two Fanuc robots. There are two more Fanucs for the palletizing and the adding of an intermediate layer. The palletizing and winding is part of a complete line, from which some components have already been sold. Technical details Palletizer Manufacturer: Ocme Model: Pegasus F450  Year of construction: 2014 Products processed: Shrink packs: PET 0.75 L 2 x 32 PET 1.0 L 3 x 2 PET 1.5 L 3 x 2 PET 1.5 L 3 x 4 Pallet Formats: Euro Pallet 800 x 1200 Chep Duesseldorfer 600 x 800 Industrial Pallet: 1000 x 1200 Speed: 42,000 bph Double lane, low level infeed Equipment: empty pallet magazine, layer pad magazine, layer pad inserter, safety fencing Wrapping machine (2x) Manufacturer: Robopac   Model: Genesis cube Year of construction: 2014 Additional functions: Film cover unit Processed pallet formats: Same as palletizer Ergonomic lifting device to enter film roll for top cover Todpow Iqknofx Af Tjf

Condition: ready for operation (used), Year of construction: 1987, VTL Stanko 1540 Chuck diameter 4000 mm Max Heigth of piece 2000 mm Max weigth of piece 50 to Main motor 63 kw Todpfx Afoqd Uvfj Tef Weigth of machine approx 100 to

Condition: new, Year of construction: 2025, functionality: fully functional, turning height: 3,000 mm, workpiece weight (max.): 50,000 kg, turning diameter: 5,500 mm, feed length X-axis: 3,150 mm, feed length Z-axis: 1,800 mm, faceplate diameter: 4,500 mm, total height: 8,000 mm, total width: 7,000 mm, total length: 12,000 mm, rotary table diameter: 4,500 mm, table load: 50,000 kg, warranty duration: 12 months, Vertical Turning Lathe, model SCR 55 New - In the process of Building - 2025 model year. Tsdpfx Afjunrume Tjf Can be fitted with: Milling options, Various colors, Coolant trough spindle, Fanuc CNC (or similar). Table Diameter - 4,500 mm Max. Machining Diameter - 5,500 mm Swing Diameter - 5,500 mm Max. Machining Height (Max. Distance between Table Top and Standard Turning Tool Holder with Tool) - 3,000 mm Max. Workpiece Weight - 50,000 kg No. of clamping jaws (standard) - 8 Linear Travels X - Axis (Ram Carriage along the cross rail) (-200/+2,950 mm) + ATC travel Z - Axis (Ram vertical displacement) 1,800 mm Cross Rail travel 2,600 mm Table diameter 4,500 mm Standard table with T-slots Belt transmission Spindle speed range (continuously variable) 0 to 1,500 rpm Feed Motor power 5.5 kW Max. Thrust force 60,000 N

Condition: ready for operation (used), Turntable diameter: 1650mm, turntable height: 65mm, mast height: 2560mm, max. load capacity: 2000kg, max. pallet dimensions X/Y/Z: approx. 1200mm/1100mm/2400mm. Machine dimensions X/Y/Z: approx. 2600mm/1650mm/2600mm, weight: approx. 550kg. Documentation available. An on-site inspection is possible. Todpfxjw R Uz Ae Af Tef

Condition: good (used), Year of construction: 1959, HESTIKA 22N Hand lever turret lathe Tedpform R Dusx Af Tof

Condition: used, Year of construction: 2009, faceplate diameter 1250 mm turning height 1250 mm Control 0i-TD Fanuc max. torque at faceplate 12500 Nm max. turning diameter 1600 mm Tedewlvifspfx Af Tef max. workpiece weight 5000 kg table speed 2- 300 min/-1 spindle cone ISO BT50 tool capacity 12 pos. total power requirement 75 kW weight of the machine ca. 32 t dimensions of the machine ca. 4,7 x 5,8 x 5,5 m CNC vertical lathe with 12 positions ATC. Spindle reception is BT 50. Control: Fanuc 0i-TD

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 52A2MXTE5269, SPECIFICATION Table size 1244 x 230mm Longitudinal traverse 815mm Cross traverse 300mm Vertical traverse 405mm Quill travel 125mm Quill feeds 0.04, 0.08, 0.15mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.25Kw Spindle speeds (inf. Variable) 50-3500rpm Spindle to nose to table 0- 450mm Spindle centre line to column 171 – 482mm Overall height 2100mm Todsw Id Hvepfx Af Tsf Overall depth 1300mm Overall width 1625mm Weight 950Kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO system Infinitely variable spindle speeds Infinitely variable longitudinal power feed & rapid to table One shot centralised lubrication system Low voltage Halogen Worklight Table guarding Base splash tray Coolant system

Condition: used, Year of construction: 1994, turning diameter 1250 mm swing diameter 1160 mm turning height 800 mm faceplate diameter 1000 mm total power requirement 97 kW weight of the machine ca. 25000 t dimensions of the machine ca. m P I T T L E R (Germany) CNC Controlled Vertical Turning and Milling Centre With Tool Changer and Pallet Changer Model PV 1250 / 1-1 Year 1994 _____ Turning Ø max. 1,000 mm Swing Ø max. 1,160 mm Turning length 800 mm X Axis - horizontal 1,300 mm Y Axis - vertical 800 mm Feed / quick feed 16,000 mm/min Main spindle speeds 10 - 1,000 rpm ! Main spindle speeds via separate C Axis 0.1 - 16 rpm Positioning accuracy of C Axis 360° + / - 5 " Tool holder ISO 50 Tool drive 22 kW Max. torque / spindle speed 315 Nm / 2,500 rpm Pallet size 630 x 630 mm Spindle drive 63 kW Total electrical load 97 kW - 400 V - 50 Hz Weight, approx. 25,000 kg Accessories / Special Features * CNC Contouring Control Model NUM 760 TX in 3 axes, with graphics, menu-guided dialogue programming, and all the usual options, cycles and sub-programs; with tool compensation, thread cutting cycles, constant speed programming, etc. * 2-axis CNC tool slide (1,300 x 800 mm) with driven tool holders, ISA 50 / 22 kW. * Tool changer with 16 tool holders, max. length 450 mm, max. weight 40 kg. * Pallet changing system, pallet size 630 x 630 mm, with setup station with indexing and drive of the pallet, and 2 separate pallet stations. * 3 pallets, 630 x 630 mm. * 3-jaw chuck, Ø 650 mm. * Face plate, Ø 900 mm. * Chip conveyor. * Band filter coolant equipment. * Completely covered working area, including safety fence for the pallet changing area. * Separate switch cabinet. * Operating manual. * Approx. 20 tool holders. * Various other accessories. High performance universal turning and milling centre for full range of machining (turning, boring, drilling, milling, and threading) with high speeds and high turning volume. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Tedpet Hwy Sefx Af Tjf Thank you for your interest. We have a selection of modern lathes available. Please let us know your requirements

Condition: excellent (used), Year of construction: 2018, operating hours: 2,000 h, functionality: fully functional, turning height: 3,000 mm, workpiece weight (max.): 30,000 kg, turning diameter: 3,500 mm, power: 100 kW (135.96 HP), TECHNICAL CHARACTERISTICS 1. Max. machining diameter mm 3.500 Tjdpstpnlwefx Af Tsf 2. Min. machining diameter mm 0 3. Max. height of the part mm 3.000 4. Max. load on the table to 30 5. Table diameter mm 3.000 6. Table speed range rpm 2 ÷ 130 7. Main AC motor - turning kW 100 8. The maximum torque of the faceplate in turning mode Nm 105.000 9. Ram vertical stroke (Z axe) mm 1.750 10. Turning ram cross section mm x mm 300x300 11. Horizontal stroke –X axe mm 2.000 12. Feed range (X and Z axe) mm/min 1 ÷ 6000 13. Rapid traverse (X and Z axe) mm/min 8.000 14. Feed motor torque (X and Z axe) Nm 22 18. Vertical stroke of the cross rail mm 2.700 CNC Equipment 1. Equipment type Fanuc Overall Dimensions 1. Floor space m 8.5 x 6 2. Max. height of the machine m 8.2 3. Max. height over floor level m 7.4 3. Machine weight to 89 Tool Magazine 1. Number of tool magazines - 1 2. Number of tools/magazine - 16 3. Feed motor torque with encoder Nm 12 4. Tool change time sec. 25 5. Maximum weight of the tool holder - for turning daN 100 6. Maximum length of the tool holder - for turning mm 600

Year of construction: 1996, condition: ready for operation (used), Working width: 2300mm, max. roll diameter: 1500mm, working speed: 180m/min, including crane track and longitudinal cutting system, shaft, belt and wiring overhauled. Todpfx Afjd Hr Uze Tof

Condition: new, Year of construction: 2024, faceplate diameter 1200- 2000 mm swing diameter 1400- 2500 mm turning height 1000- 2000 mm Control Siemens/Fanuc Tedpsix A Avofx Af Tsf We offer brand new CNC vertical lathes, with and without live tooling. Swing diameter could be between 1,4 to 2,5 m. Please send your enquiry if you are interested.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 52A2MXTE5294, SPECIFICATION Table size 1244 x 230mm Longitudinal traverse 815mm Cross traverse 300mm Vertical traverse 405mm Quill travel 125mm Quill feeds 0.04,0.08,0.15mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.25Kw Spindle speeds (inf. Variable) 50-3500rpm Tsdpfxswczn Is Af Tjf Spindle to nose to table 0- 450mm Spindle centre line to column 171 – 482mm Overall height 2100mm Overall depth 1300mm Overall width 1625mm Weight 950Kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO system Infinitely variable spindle speeds Infinitely variable longitudinal power feed & rapid to table Table guarding One shot centralised lubrication system Lighting Base splash tray Coolant system

Condition: new, Year of construction: 2025, turning height: 2,400 mm, rotary table diameter: 2,500 mm, table load: 30,000 kg, table diameter: 2,500 mm, warranty duration: 12 months, table speed: 112 mm/min, REM Vertical Turning Lathe TURNING DIAMETER SCR SCR 27 MANUAL Special manufactured by REM for : CENTER AND EAST EUROPE MIDDLE EAST LATIN AMERICA DEVELOPING SHOPS, HIGHLIGHTS Tsdev Hngtopfx Af Tof - UNBEATABLE PRICE - VERY EFFECTIVE MACHINE - GOOD FOR WORSHOPS IN SMALL AND MIDDLE RANGE OF PRODUCTION - NO GEARBOXES - NO CNC CONTROLL - NO EXPENSIVE TEHNOLOGIST AND WORKER - EASY MAINTENANCE AND - EASY OPERATION - EASY LEARNING Technical Details: Faceplate Diameter (mm) 2500mm Max. Turning Diameter (mm) 2500+ up to300mm Machining Height: 2400mm Max. Work Piece Weight: 30 tons Control Conventional DIGITAL READOUT for each axis Plase note: This machine tool is made to order and can be customized to your specific needs.

Year of construction: 2007, condition: ready for operation (used), Max. roll diameter: 1250mm, max. speed: 100m/min, weight: 2.9t. Tjdpfx Afsf H Dlbe Tef

Condition: new, Year of construction: 2024, faceplate diameter 2000- 12000 mm swing diameter 2500- 15000 mm turning height 1600- 7000 mm Todpfxoix A Ays Af Tof Control Siemens/Fanuc We offer brand new CNC vertical lathes, with and without live tooling. Swing diameter could be between 2,5 to 15 m. Please send your enquiry if you are interested.

Condition: new, Year of construction: 2025, turning height: 2,800 mm, workpiece weight (max.): 30,000 kg, turning diameter: 3,300 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,500 mm, faceplate diameter: 3,000 mm, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, rotary table diameter: 3,000 mm, rapid traverse X-axis: 6 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, rotational speed (max.): 92 rpm, rotational speed (min.): 1 rpm, table load: 30,000 kg, table diameter: 3,000 mm, REM Vertical Turning Lathe TURNING DIAMETER SCR 33 MANUAL with DRO Special manufactured by REM for : CENTER AND EAST EUROPE MIDDLE EAST LATIN AMERICA DEVELOPING SHOPS , HIGHLIGHTS - UNBEATABLE PRICE - VERY EFFECTIVE MACHINE - GOOD FOR WORSHOPS IN SMALL AND MIDDLE RANGE OF PRODUCTION - NO GEARBOXES Tsdpfx Afov Ilg He Tjf - NO CNC CONTROLL - NO EXPANSIVE TEHNOLOGIST AND WORKER - EASY MAINTENANCE AND - EASY OPERATE - EASY LEARN Technical Details: Faceplate Diameter (mm) 3000 Max. Turning Diameter (mm) + 300 Machining Height: 2800 mm Max. Work Piece Weight: 30 tons Conventional Control DIGITAL READ OUT for each axis

Condition: ready for operation (used), A CNC-controlled REM vertical lathe is available. Working diameter: 2500mm-7000mm, working height: 1000mm, control: Siemens 840D. Including driven tools. On-site inspection is possible. Tsdpfx Afsvriq Dj Tef

Year of construction: 1990, condition: ready for operation (used), Used for the horizontal winding of profiles, includes control cabinet with main switch of the system, infeed roller conveyor with movable side stop, pneumatically operated lifting device, control panel with emergency stop button, winding unit with height adjustment, outfeed roller conveyor. Connected load: 2.5kW, length: 16,060mm, width: 2485mm, height: 1900mm. With documentation, on-site inspection is possible. Tjdewbpy Nspfx Af Tjf

Year of construction: 1955, condition: ready for operation (used), A Froriep horizontal vertical lathe that was completely overhauled in 2009 is available. Faceplate diameter: 1250mm, turning height: 1100mm, circulation diameter over bed: 1400mm, power: 38kW, container volume: 1000l, control: Siemens S7. The machine has undergone extensive mechanical and electrical overhauls, including a new lubrication and cooling system and a new paint job. Documentation available. On-site inspection is possible. Todou S I E Ispfx Af Tef